EN 13501-2:2016

Withdrawn

Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services

Available format(s):

Withdrawn date: 31-12-2016

Language(s):

Published date: 22-06-2016

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Fire scenarios
5 Resistance to fire performance characteristics
6 Declaration of fire resistance performance
7 Classification procedure for fire resistance
Annex A (normative) - Classification report
Annex B (informative) - Presentation of characterization
        data and their field of application for products
        and systems for protecting elements or parts of
        work
Bibliography

Abstract - (Show below) - (Hide below)

This European Standard specifies the procedure for classification of construction products and building elements using data from fire resistance and smoke leakage tests which are within the direct field of application of the relevant test method. Classification on the basis of extended application of test results is also included in the scope of this European Standard."This European Standard deals with:a)loadbearing elements without a fire separating function:walls;floors;roofs;beams;columns;balconies;walkways;stairs.b)loadbearing elements with a fire separating function, with or without glazing, services and fixtures:walls;floors;roofs;raised floors.c)products and systems for protecting elements or parts of the works:ceilings with no independent fire resistance;fire protective coatings, claddings and screens;d)non-loadbearing elements or parts of works, with or without glazing, services and fixtures:partitions;facades (curtain walls) and external walls;ceilings with independent fire resistance;raised floorsfire doors and shutters and their closing devices;smoke control doors;conveyor systems and their closures;penetration seals;linear gap seals;service ducts and shafts;chimneys.e)wall and ceiling coverings with fire protection ability.f)lift landing doors which are tested according to EN 81-58 are excluded from this European Standard. Lift landing doors which are tested in accordance with EN 1634-1, are classified in accordance with 7.5.5.Relevant test methods which have been prepared for these elements are listed in Clauses 2 and 7.

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 127
Development Note	Supersedes PREN 13501-2. (06/2016)
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Withdrawn
Supersedes	PREN 13501-2 : DRAFT 2015

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NEN EN 13501-2 : 2016	Identical
SN EN 13501-2 : 2016	Identical
NS EN 13501-2 : 2007 + A1 2009	Identical
I.S. EN 13501-2:2016	Identical
NF EN 13501-2 : 2016	Identical
UNE-EN 13501-2:2009	Identical
NS-EN 13501-2:2016	Identical
NBN EN 13501-2 : 2016	Identical
BS EN 13501-2 : 2007	Identical
UNI EN 13501-2 : 2009	Identical
DIN EN 13501-2:2015-11 (Draft)	Identical
DS EN 13501-2 : 2016	Identical
ONORM EN 13501-2 : 2016	Identical
DIN EN 13501-2:2003-12	Identical
UNI EN 13501-2 : 2016	Identical
UNE-EN 13501-2:2019	Identical
PN EN 13501-2 : 2016	Identical
BS EN 13501-2:2016	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

PREN 13658-2 : DRAFT 2017	METAL LATH AND BEADS - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: EXTERNAL RENDERING
PREN 15497 : DRAFT 2011	STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
08/30188125 DC : 0	BS EN 15269-3 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 3: TIMBER HINGED AND PIVOTED DOORSETS
BS EN 14509:2013	Self-supporting double skin metal faced insulating panels. Factory made products. Specifications
UNI EN 15998 : 2011	GLASS IN BUILDING - SAFETY IN CASE OF FIRE, FIRE RESISTANCE - GLASS TESTING METHODOLOGY FOR THE PURPOSE OF CLASSIFICATION
17/30347436 DC : 0	BS EN 15269-1 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 1: GENERAL REQUIREMENTS
DIN EN 15882-3:2009-07	EXTENDED APPLICATIONS OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS
I.S. EN 15681-2:2017	GLASS IN BUILDING - BASIC ALUMINO SILICATE GLASS PRODUCTS - PART 2: PRODUCT STANDARD
15/30328765 DC : 0	BS EN 12602 - PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
DIN EN 15269-2:2012-12	Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 2: Fire resistance of hinged and pivoted steel doorsets
I.S. EN 15269-1:2010	EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 1: GENERAL REQUIREMENTS
CEN/TR 14819-2:2005	Safety recommendations for cableway installations designed to carry persons - Prevention and fight against fire - Part 2: Other funicular railways and other installations
I.S. EN 15269-7:2009	EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 7: FIRE RESISTANCE FOR STEEL SLIDING DOORSETS
11/30251988 DC : 0	BS EN 14190 - GYPSUM PLASTERBOARD PRODUCTS FROM PROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 15269-20:2009-12	Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 20: Smoke control for hinged and pivoted steel, timber and metal framed glazed doorsets
I.S. EN 15269-5:2014	EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 5: FIRE RESISTANCE OF HINGED AND PIVOTED METAL FRAMED GLAZED DOORSETS AND OPENABLE WINDOWS
PREN 13279-1 : DRAFT 2017	GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
UNI EN 1634-2 : 2009	FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES AND ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE CHARACTERISATION TEST FOR ELEMENTS OF BUILDING HARDWARE
BS EN 16034:2014	Pedestrian doorsets, industrial, commercial, garage doors and openable windows. Product standard, performance characteristics. Fire resisting and/or smoke control characteristics
08/30152055 DC : DRAFT APR 2008	BS EN 50518-1 - MONITORING AND ALARM RECEIVING CENTER - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS
BS EN 1364-5:2017	Fire resistance tests for non-loadbearing elements Air transfer grilles
BS EN 15682-2:2013	Glass in building. Heat soaked thermally toughened alkaline earth silicate safety glass Evaluation of conformity/Product standard
13/30217369 DC : 0	BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
BS EN 15269-2:2012	Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Fire resistance of hinged and pivoted steel doorsets
BS EN 45545-1:2013	RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
08/30171552 DC : DRAFT JAN 2008	BS EN 13279-1 - GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
CEI UNI EN 50518-1 : 2015	MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS
DIN EN 14509:2013-12	SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
I.S. EN 15080-12:2011	EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 12: LOADBEARING MASONRY WALLS
07/30166420 DC : DRAFT AUG 2007	BS EN 1520 - PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE
13/30267101 DC : 0	BS EN 15269-11 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 11: FIRE RESISTANCE OF OPERABLE FABRIC CURTAINS
BS EN 16309 : 2014	SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY
PREN 13658-1 : DRAFT 2017	METAL LATH AND BEADS - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: INTERNAL PLASTERING
10/30212126 DC : 0	BS EN 845-2 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
PREN 15254-4 : DRAFT 2016	EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS
PREN 572-9 : DRAFT 2017	GLASS IN BUILDING - BASIC SODA LIME SILICATE GLASS PRODUCTS - PART 9: PRODUCT STANDARD
16/30336421 DC : 0	BS EN 81-58 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATION AND TESTS - PART 58: LANDING DOORS FIRE RESISTANCE TEST
16/30330693 DC : 0	BS EN 15254-5 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 5: METAL SANDWICH PANEL CONSTRUCTION
17/30309558 DC : 0	BS IEC 60772 ED 2.0 - NUCLEAR POWER PLANTS - INSTRUMENTATION SYSTEMS IMPORTANT TO SAFETY - ELECTRICAL PENETRATION ASSEMBLIES IN CONTAINMENT STRUCTURES
NF EN 15998 : 2011	GLASS IN BUILDING - SAFETY IN CASE OF FIRE, FIRE RESISTANCE - GLASS TESTING METHODOLOGY FOR THE PURPOSE OF CLASSIFICATION
UNE-EN 16623:2015	Paints and varnishes - Reactive coatings for fire protection of metallic substrates - Definitions, requirements, characteristics and marking
UNI EN 16240 : 2014	LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
I.S. EN 15269-20:2009	EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 20: SMOKE CONTROL FOR HINGED AND PIVOTED STEEL, TIMBER AND METAL FRAMED GLAZED DOORSETS
DIN EN 15254-7:2012-09	EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING CEILINGS - PART 7: METAL SANDWICH PANEL CONSTRUCTION
PREN 1364-3 : DRAFT 2011	FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 3: CURTAIN WALLING - FULL CONFIGURATION (COMPLETE ASSEMBLY)
PREN 14081-1 : DRAFT 2013	TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 1: GENERAL REQUIREMENTS
DIN EN 1364-5:2017-09	Fire resistance tests for non-loadbearing elements - Part 5: Air transfer grilles
UNE-EN 45545-1:2013	Railway applications - Fire protection on railway vehicles - Part 1: General
PREN 1364-4 : DRAFT 2011	FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 4: CURTAIN WALLING - PART CONFIGURATION
ISO/TS 19880-1:2016	Gaseous hydrogen Fuelling stations Part 1: General requirements
DIN EN 15254-4:2013-10	EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS
CEN/TR 14819-1:2004	Safety recommendations for cableway installations designed to carry persons - Prevention and fight against fire - Part 1: Funicular railways in tunnels
S.R. CEN TS 1992-4-1:2009	DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
I.S. EN 16034:2014	PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND OPENABLE WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS
BS EN 16153 : 2013	LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
UNE-EN 15882-4:2013	Extended application of results from fire resistance tests for service installations - Part 4: Linear joint seals
I.S. EN 45545-3:2013	RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS
DIN EN 15254-5:2010-04	EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 5: METAL SANDWICH PANEL CONSTRUCTION
PREN 12602 : DRAFT 2015	PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
UNI EN 16034 : 2014	PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND OPENABLE WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS
UNI CEI EN 45545-1 : 2013	RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
CEI UNI EN 45545-3 : 2013	RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS
DD CEN/TS 1992-4-1:2009	DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
UNI CEI EN 50518-1 : 2014	MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS
17/30360105 DC : 0	BS EN 1748-1-2 - GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - BOROSILICATE FLOAT GLASS - PART 1-2: PRODUCT STANDARD
UNI EN 1279-5 : 2010	GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY
UNI EN 1090-1 : 2012	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS
UNI EN 15682-2 : 2013	GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED ALKALINE EARTH SILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
BS EN 15269-11:2018	Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Fire resistance for operable fabric curtains
I.S. EN 14963:2006	ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS
DIN EN 1096-4:2015-06 (Draft)	GLASS IN BUILDING - COATED GLASS - PART 4: EVALUATION OF CONFORMITY/PRODUCT STANDARD
I.S. EN 1634-1:2014	Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 1: Fire resistance test for door and shutter assemblies and openable windows
I.S. EN 14915:2013	SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
EN 14915:2013+A1:2017	Solid wood panelling and cladding - Characteristics, requirements and marking
DIN EN 1993-1-2:2010-12	Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2009)
DIN EN 14250 E : 2010	TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS
DIN EN 1364-3:2014-05	FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 3: CURTAIN WALLING - FULL CONFIGURATION (COMPLETE ASSEMBLY)
BS EN 13063-2:2005	CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 2: REQUIREMENTS AND TEST METHODS UNDER WET CONDITIONS
BS EN 14471 : 2013	CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
BS EN 845-2 : 2013	SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
13/30280057 DC : 0	BS EN 13782 - TEMPORARY STRUCTURE - TENTS - SAFETY
BS EN 13063-3:2007	CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 3: REQUIREMENTS AND TEST METHODS FOR AIR FLUE SYSTEM CHIMNEYS
BS EN 14620-4:2006	Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0°C and -165°C Insulation components
BS EN 179:2008	Building hardware. Emergency exit devices operated by a lever handle or push pad, for use on escape routes. Requirements and test methods
BS EN 12337-2:2004	GLASS IN BUILDING - CHEMICALLY STRENGTHENED SODA LIME SILICATE GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
BS EN 14190:2014	Gypsum board products from reprocessing. Definitions, requirements and test methods
BS EN 1634-3:2004	Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware Smoke control test for door and shutter assemblies
BS EN 12209:2016	Building hardware. Mechanically operated locks and locking plates. Requirements and test methods
BS EN 438-7:2005	HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
BS EN 357:2004	GLASS IN BUILDING - FIRE RESISTANT GLAZED ELEMENTS WITH TRANSPARENT OR TRANSLUCENT GLASS PRODUCTS - CLASSIFICATION OF FIRE RESISTANCE
UNE-EN 14496:2017	Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards - Definitions, requirements and test methods
BS EN 13658-2:2005	Metal lath and beads. Definitions, requirements and test methods External rendering
BS EN 303-5:2012	Heating boilers Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking
BS EN 520 : 2004	GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
BS EN 14989-1:2007	Chimneys. Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications Vertical air/flue terminals for C6-type appliances
I.S. EN 1364-3:2014	FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 3: CURTAIN WALLING - FULL CONFIGURATION (COMPLETE ASSEMBLY)
DIN EN 13815:2006-12	Fibrous gypsum plaster casts - Definitions, requirements and test methods
EN 13069:2005	Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods
DIN EN 15254-2:2009-10	EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS
CEN/TS 1992-4-1:2009	Design of fastenings for use in concrete - Part 4-1: General
DIN EN 13063-3:2007-10	CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 3: REQUIREMENTS AND TEST METHODS FOR AIR FLUE SYSTEM CHIMNEYS
DIN EN 13830:2015-07	CURTAIN WALLING - PRODUCT STANDARD
DIN EN 14496:2017-09	GYPSUM BASED ADHESIVES FOR THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS AND GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
EN 12602:2016	Prefabricated reinforced components of autoclaved aerated concrete
EN 12391-1:2003	Chimneys - Execution standard for metal chimneys - Part 1: Chimneys for non-roomsealed heating appliances
DIN EN 14209:2017-09	PREFORMED PLASTERBOARD CORNICES - DEFINITIONS, REQUIREMENTS AND TEST METHODS
EN 12337-2:2004	Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
EN 12859:2011	Gypsum blocks - Definitions, requirements and test methods
EN 12150-2:2004	Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
EN 1090-1:2009+A1:2011	Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
EN 50518-1:2013	MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS
DIN EN 15725:2012-05	Extended application reports on the fire performance of construction products and building elements (includes Corrigendum AC:2012)
DIN EN 13915:2017-09	PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS
EN 50583-2:2016	Photovoltaics in buildings - Part 2: BIPV systems
EN 13063-1:2005+A1:2007	Chimneys - System chimneys with clay/ceramic flue liners - Part 1: Requirements and test methods for sootfire resistance
EN 13024-2:2004	Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard
EN 45545-3:2013	Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers
EN 14250:2010	Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
EN 13200-7:2014	Spectator facilities - Part 7: Entry and exit elements and routes
EN 1366-7:2004	Fire resistance tests for service installations - Part 7: Conveyor systems and their closures
DIN EN 15287-2:2008-06	Chimneys - Design, installation and commissioning of chimneys - Part 2: Chimneys for roomsealed appliances
PREN 13830 : DRAFT 2013	CURTAIN WALLING - PRODUCT STANDARD
UNI EN 16309 : 2014-10	SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY
DIN EN 15882-4:2012-07	EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 4: LINEAR JOINT SEALS
CEI UNI EN 45545-1 : 2013	RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
DIN EN 15682-2:2013-10	GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED ALKALINE EARTH SILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
UNI EN 15269-3 : 2012	EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 3: FIRE RESISTANCE OF HINGED AND PIVOTED TIMBER DOORSETS AND OPENABLE TIMBER FRAMED WINDOWS
BS EN 15283-1 : 2008	GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT
UNE-EN 13200-7:2014	Spectator facilities - Part 7: Entry and exit elements and routes
UNE-EN 15683-2:2014	Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 2: Evaluation of conformity/Product standard
13/30266550 DC : 0	BS EN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
10/30218654 DC : 0	BS EN 12859 - GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 15725 E : 2012	EXTENDED APPLICATION REPORTS ON THE FIRE PERFORMANCE OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS
11/30237554 DC : 0	BS EN 14732 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - REQUIREMENTS
UNI EN 15269-7 : 2009	EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 7: FIRE RESISTANCE FOR STEEL SLIDING DOORSETS
DIN EN 16623:2015-04	PAINTS AND VARNISHES - REACTIVE COATINGS FOR FIRE PROTECTION OF METALLIC SUBSTRATES - DEFINITIONS, REQUIREMENTS, CHARACTERISTICS AND MARKING
BS EN 1090-1 : 2009	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS
BS EN 15681-2:2017	Glass in Building. Basic alumino silicate glass products Product standard
PREN 45545-3 : DRAFT 2010	RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS
BS EN 50583-1:2016	Photovoltaics in buildings BIPV modules
BS EN 50583-2:2016	PHOTOVOLTAICS IN BUILDINGS - PART 2: BIPV SYSTEMS
I.S. EN 12391-1:2004	CHIMNEYS - EXECUTION STANDARD FOR METAL CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES
UNI EN 15283-2 : 2009	GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS
12/30255284 DC : DRAFT APR 2012	BS EN 1096-4 - GLASS IN BUILDING - COATED GLASS - PART 4: EVALUATION OF CONFORMITY - PRODUCT STANDARD
DIN EN 15283-2:2009-12	Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards (includes Amendment A1:2009)
PREN 14178-2 : DRAFT 2017	GLASS IN BUILDING - BASIC ALKALINE EARTH SILICATE GLASS PRODUCTS - PART 2: PRODUCT STANDARD
09/30188385 DC : 0	BS EN 15269-2 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE OF HINGED AND PIVOTED STEEL DOORSETS
DIN EN 45545-1:2013-08	RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
10/30211850 DC : 0	BS EN 16034 - PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTANCE AND/OR SMOKE CONTROL CHARACTERISTICS
BS EN 16623:2015	PAINTS AND VARNISHES - REACTIVE COATINGS FOR FIRE PROTECTION OF METALLIC SUBSTRATES - DEFINITIONS, REQUIREMENTS, CHARACTERISTICS AND MARKING
DIN EN 15497:2014-07	STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
17/30354239 DC : 0	BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS
12/30261882 DC : 0	BS EN 14081-1 - TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS-SECTION - PART 1: GENERAL REQUIREMENTS
DIN EN 15287-1:2010-12	Chimneys - Design, installation and commissioning of chimneys - Part 1: Chimneys for non-roomsealed heating appliances (includes Amendment A1:2010)
I.S. EN 15283-1:2008	GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT
UNI EN 15283-1 : 2009	GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT
11/30236369 DC : 0	BS EN 14080 - TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER
09/30203195 DC : 0	BS EN 15497 - FINGER JOINTED STRUCTURAL TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
BS EN 16351:2015	Timber structures. Cross laminated timber. Requirements
UNI EN 15080-12 : 2011	EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 12: LOADBEARING MASONRY WALLS
UNE-EN 45545-3:2013	Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers
13/30281348 DC : 0	BS EN 13830 - CURTAIN WALLING - PRODUCT STANDARD
10/30218985 DC : DRAFT JUNE 2010	BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS
11/30250549 DC : 0	BS EN 14471 - CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
PREN 1748-1-2 : DRAFT 2017	GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - BOROSILICATE FLOAT GLASS - PART 1-2: PRODUCT STANDARD
BS EN 81-58:2003	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATION AND TESTS - PART 58: LANDING DOORS FIRE RESISTANCE TEST
UNI CEN/TS 1992-4-1 : 2009	DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
I.S. EN 1096-4:2004	GLASS IN BUILDING - COATED GLASS - PART 4: EVALUATION OF CONFORMITY/PRODUCT STANDARD
I.S. EN 13200-7:2014	SPECTATOR FACILITIES - PART 7: ENTRY AND EXIT ELEMENTS AND ROUTES
BS EN 1999-1-2:2007	Eurocode 9. Design of aluminium structures Structural fire design
I.S. EN 15998:2010	GLASS IN BUILDING - SAFETY IN CASE OF FIRE, FIRE RESISTANCE - GLASS TESTING METHODOLOGY FOR THE PURPOSE OF CLASSIFICATION
FM 4100 : 1988	FIRE DOOR ASSEMBLIES
PREN 14374 : DRAFT 2016	TIMBER STRUCTURES - LAMINATED VENEER LUMBER (LVL) - REQUIREMENTS
PREN 12150-2 : DRAFT 2017	GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 2: PRODUCT STANDARD
DIN EN 15269-1:2010-07	EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 1: GENERAL REQUIREMENTS
UNI EN 15497 : 2014	STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
PREN 1748-2-2 : DRAFT 2017	GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - GLASS CERAMICS - PART 2-2: PRODUCT STANDARD
PREN 303-5 : DRAFT 2010	CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
S.R. CEN/TR 12101-4:2009	SMOKE AND HEAT CONTROL SYSTEMS - PART 4: INSTALLED SHEVS SYSTEMS FOR SMOKE AND HEAT VENTILATION
BS EN 15269-1:2010	Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware General requirements
I.S. EN 14081-1:2016	TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 1: GENERAL REQUIREMENTS
BS EN 13369:2013	Common rules for precast concrete products
I.S. EN 16035:2012	HARDWARE PERFORMANCE SHEET (HPS) - IDENTIFICATION AND SUMMARY OF TEST EVIDENCE TO FACILITATE THE INTER-CHANGEABILITY OF BUILDING HARDWARE FOR APPLICATION TO FIRE RESISTING AND/OR SMOKE CONTROL DOORSETS AND/OR OPENABLE WINDOWS
UNI EN 15269-10 : 2011	EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 10: FIRE RESISTANCE OF STEEL ROLLING SHUTTER ASSEMBLIES
I.S. EN 13369:2013	COMMON RULES FOR PRECAST CONCRETE PRODUCTS
UNE-EN 15725:2011	Extended application reports on the fire performance of construction products and building elements
DIN EN 15681-2:2015-07 (Draft)	GLASS IN BUILDING - BASIC ALUMINO SILICATE GLASS PRODUCTS - PART 2: PRODUCT STANDARD
PREN 14471 : DRAFT 2011	CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
PREN 15269-1 : DRAFT 2017	EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 1: GENERAL REQUIREMENTS
UNI EN 15287-1 : 2010	CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES
UNI EN 15287-2 : 2008	CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 2: CHIMNEYS FOR ROOM-SEALED APPLIANCES
UNI EN 15254-5 : 2009	EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 5: METAL SANDWICH PANEL CONSTRUCTION
I.S. EN 1364-5:2017	FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 5: AIR TRANSFER GRILLES
I.S. EN 16309:2014	SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY
15/30319715 DC : 0	BS EN 1279-5 - GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY
17/30353865 DC : 0	BS EN 1443 - CHIMNEYS - GENERAL REQUIREMENTS
PREN 14449 : DRAFT 2017	GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PRODUCT STANDARD
I.S. EN 15682-2:2013	GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED ALKALINE EARTH SILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
UNI EN 15269-20 : 2009	EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 20: SMOKE CONTROL FOR HINGED AND PIVOTED STEEL, TIMBER AND METAL FRAMED GLAZED DOORSETS
UNE-EN 15080-12:2011	Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls
UNE-EN 50518-1:2014	Monitoring and alarm receiving centre - Part 1: Location and construction requirements
EN 1096-4:2004	Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard
IEC 61936-1:2010+AMD1:2014 CSV	Power installations exceeding 1 kV a.c. - Part 1: Common rules
DIN EN 13063-2 E : 2007	CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 2: REQUIREMENTS AND TEST METHODS UNDER WET CONDITIONS
DIN EN 12337-2:2005-01	Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard; German version EN 12337-2:2004
DIN EN 13279-1:2008-11	GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
DIN EN 1366-3:2009-07	Fire resistance tests for service installations - Part 3: Penetration seals
DIN EN 1748-1-2:2005-01	Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard
DIN EN 572-9:2005-01	Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard
DIN EN 1520:2011-06	Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
DIN EN 1748-2-2:2005-01	Glass in building - Special basic products - Glass ceramics - Part 2-2: Evaluation of conformity/Product standard
DIN EN 1364-4:2014-05	Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration
DIN EN 14178-2:2005-01	Glass in Building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard
DIN EN 1279-5:2015-08 (Draft)	GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY
DIN EN 14449:2005-07	Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard
DIN EN 14321-2 E : 2005	GLASS IN BUILDING - THERMALLY TOUGHENED ALKALINE EARTH SILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
DIN EN 14246:2006-09	Gypsum elements for suspended ceilings - Definitions, requirements and test methods
DIN EN 14471:2015-03	CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
DIN EN 303-5:2012-10	Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
DIN EN 15318:2008-01	Design and application of gypsum blocks
DIN EN 14250:2010-05	Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
DIN EN 14496:2016-02 (Draft)	GYPSUM BASED ADHESIVES FOR THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS AND GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNE-EN 14080:2013	Timber structures - Glued laminated timber and glued solid timber - Requirements
UNE-EN 1364-3:2015	Fire resistance tests for non-loadbearing elements - Part 3: Curtain walling - Full configuration (complete assembly)
I.S. EN 13830:2015	CURTAIN WALLING - PRODUCT STANDARD
I.S. EN 14471:2013	CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
I.S. EN 1364-4:2014	FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 4: CURTAIN WALLING - PART CONFIGURATION
I.S. EN 14496:2017	GYPSUM BASED ADHESIVES FOR THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS AND GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 13063-2:2005	CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 2: REQUIREMENTS AND TEST METHODS UNDER WET CONDITIONS
I.S. EN 179:2008	BUILDING HARDWARE - EMERGENCY EXIT DEVICES OPERATED BY A LEVER HANDLE OR PUSH PAD, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
I.S. EN 14209:2017	PREFORMED PLASTERBOARD CORNICES - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 12391-1:2004-04	CHIMNEYS - EXECUTION STANDARD FOR METAL CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOM SEALED HEATING APPLIANCES
I.S. EN 1520:2011	PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE WITH STRUCTURAL OR NON-STRUCTURAL REINFORCEMENT
I.S. EN 13915:2017	PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 1634-3:2004	FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR AND SHUTTER ASSEMBLIES, OPENABLE WINDOWS AND ELEMENTS OF BUILDING HARDWARE - PART 3: SMOKE CONTROL TEST FOR DOOR AND SHUTTER ASSEMBLIES
DIN EN 1036-2:2008-05	GLASS IN BUILDING - MIRRORS FROM SILVER-COATED FLOAT GLASS FOR INTERNAL USE - PART 2: EVALUATION OF CONFORMITY - PRODUCT STANDARD
I.S. EN 520:2005	GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 845-2:2013	SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
I.S. EN 13063-1:2006	CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 1: REQUIREMENTS AND TEST METHODS FOR SOOTFIRE RESISTANCE
I.S. EN 14250:2010	TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS
I.S. EN 357:2004	GLASS IN BUILDING - FIRE RESISTANT GLAZED ELEMENTS WITH TRANSPARENT OR TRANSLUCENT GLASS PRODUCTS - CLASSIFICATION OF FIRE RESISTANCE
I.S. EN 13950:2014	GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 12209:2016	BUILDING HARDWARE - MECHANICALLY OPERATED LOCKS AND LOCKING PLATES - REQUIREMENTS AND TEST METHODS
I.S. EN 303-5:2012	HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
I.S. EN 1125:2008	BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
I.S. EN 13964:2014	SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
DIN EN 13069:2005-12	Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods
I.S. EN 12859:2011	GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 14600:2005	DOORSETS AND OPENABLE WINDOWS WITH FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS - REQUIREMENTS AND CLASSIFICATION
DIN EN 15269-7:2010-04	Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 7: Fire resistance for steel sliding doorsets
I.S. EN 14190:2014	GYPSUM BOARD PRODUCTS FROM REPROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 1366-3:2009	FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS
EN 16351:2015	Timber structures - Cross laminated timber - Requirements
VDI 2050 Blatt 1.1:2017-07	Requirements for technical equipment rooms - Space for service shafts
VDI 3564 Blatt 1:2017-05	Fire protection - Recommendations for high-bay warehouses
UNE-EN 1634-1:2016	Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 1: Fire resistance test for door and shutter assemblies and openable windows
EN 1279-5:2005+A2:2010	Glass in building - Insulating glass units - Part 5: Evaluation of conformity
09/30194124 DC : DRAFT MAY 2009	BS EN 15254-7 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 7: NON-LOAD BEARING SANDWICH PANELS - CEILINGS
BS EN 15287-2:2008	Chimneys. Design, installation and commissioning of chimneys Chimneys for roomsealed appliances
10/30216690 DC : 0	BS EN 45545-3 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS
05/30134012 DC : 0	EN 15254-4 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTION
BS EN 50518-1:2013	Monitoring and alarm receiving centre Location and construction requirements
PREN 1125 : DRAFT 2016	BUILD HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
16/30340523 DC : 0	BS EN 17020-4 - EXTENDED APPLICATION OF TEST RESULTS ON DURABILITY OF SELFCLOSING FOR DOORSETS AND OPENABLE WINDOWS - PART 4: DURABILITY OF SELF-CLOSING OF FIRE RESISTANCE HINGED AND PIVOTED METAL FRAMED GLAZED DOORSETS AND OPENABLE WINDOWS
DIN EN 15269-10:2011-07	Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements of building hardware - Part 10: Fire resistance of steel rolling shutter assemblies
16/30332911 DC : 0	BS EN 14496 - GYPSUM BASED ADHESIVES FOR THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS AND GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
PD CEN/TR 14819-2:2005	SAFETY RECOMMENDATIONS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PREVENTION AND FIGHT AGAINST FIRE - PART 2: OTHER FUNICULAR RAILWAYS AND OTHER INSTALLATIONS
16/30347446 DC : 0	BS EN 17064 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PREVENTION AND FIGHT AGAINST FIRE
DIN EN 15882-4 E : 2012	EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 4: LINEAR JOINT SEALS
10/30211853 DC : 0	BS EN 16035 - HARDWARE PERFORMANCE SHEET (HPS) - IDENTIFICATION AND SUMMARY OF TEST EVIDENCE TO FACILITATE THE INTERCHANGEABILITY OF BUILDING HARDWARE FOR APPLICATION TO FIRE RESISTING AND SMOKE CONTROL DOORSETS AND OPENABLE WINDOWS
I.S. EN 15080-8:2009	EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 8: BEAMS
DIN EN 16351 E : 2015	TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS
BS EN 15254-2:2009	EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS
BS EN 16240:2013	Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods
BS EN 15269-7:2009	EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 7: FIRE RESISTANCE FOR STEEL SLIDING DOORSETS
BS EN 15497:2014	Structural finger jointed solid timber. Performance requirements and minimum production requirements
05/30137949 DC : 0	EN 15269-3 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE FOR DOORSETS AND SHUTTER ASSEMBLIES - FOR DOORS AND SHUTTERS - PART 3: TIMBER HINGED AND PIVOTED DOORSETS
BS EN 15254-5:2009	Extended application of results from fire resistance tests. Non-loadbearing walls Metal sandwich panel construction
16/30332908 DC : 0	BS EN 14209 - PREFORMED PLASTERBOARD CORNICES - DEFINITIONS, REQUIREMENTS AND TEST METHODS
PD CEN/TR 15123:2005	Design, preparation and application of internal polymer plastering systems
BS EN 16035:2012	Hardware performance sheet (HPS). Identification and summary of test evidence to facilitate the inter-changeability of building hardware for application to fire resisting and/or smoke control doorsets and/or openable windows
DIN EN 15283-1:2009-12	Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement (includes Amendment A1:2009)
BS EN 15683-2:2013	Glass in building. Thermally toughened soda lime silicate channel shaped safety glass Evaluation of conformity. Product standard
BS EN 13200-7:2014	Spectator facilities Entry and exit elements and routes
BS EN 15882-3:2009	Extended applications of results from fire resistance tests for service installations Penetration seals
DIN EN 15498:2008-08	PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
BS EN 15269-20:2009	Extended application of test results for fire resistance and/ or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Smoke control for hinged and pivoted steel, timber and metal framed glazed doorsets
UNE-EN 50583-2:2016	Photovoltaics in buildings - Part 2: BIPV systems
BS EN 15725:2010	Extended application reports on the fire performance of construction products and building elements
DIN EN 13200-7 E : 2014	SPECTATOR FACILITIES - PART 7: ENTRY AND EXIT ELEMENTS AND ROUTES
UNI EN 303-5 : 2012	HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
03/115046 DC : DRAFT SEP 2003	BS EN 1366-4 - FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 4: LINEAR JOINT SEALS
DIN EN 14963 E : 2006	ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS
12/30266506 DC : 0	BS EN 50583 - PHOTOVOLTAICS IN BUILDINGS
16/30347433 DC : 0	BS EN 15254-4 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS
DIN EN 13200-7:2014-06	SPECTATOR FACILITIES - PART 7: ENTRY AND EXIT ELEMENTS AND ROUTES
05/30136031 DC : 0	EN 15287-1 - CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES
BS EN 45545-3:2013	RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS
05/30138009 DC : DRAFT AUG 2005	EN 15319 - GENERAL PRINCIPLES OF DESIGN OF FIBROUS (GYPSUM) PLASTER WORKS
BS EN 15287-1 : 2007	CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES
DIN EN 15080-12:2011-04	Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls
10/30228886 DC : 0	BS EN 303-5 - CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
DIN EN 14963:2006-12	Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods
11/30238648 DC : DRAFT FEB 2011	BS EN 16240 - LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
PREN 15269-20 : DRAFT 2017	EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 20: SMOKE CONTROL FOR DOORS, SHUTTERS AND OPENABLE WINDOWS
BS EN 15498:2008	PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
12/30274727 DC : 0	BS EN 61936-1 AMD 1 - POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES
DIN EN 16623 E : 2015	PAINTS AND VARNISHES - REACTIVE COATINGS FOR FIRE PROTECTION OF METALLIC SUBSTRATES - DEFINITIONS, REQUIREMENTS, CHARACTERISTICS AND MARKING
I.S. EN 15254-7:2012	EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING CEILINGS - PART 7: METAL SANDWICH PANEL CONSTRUCTION
DIN EN 16153:2015-05	LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
PREN 50518 : DRAFT 2016	MONITORING AND ALARM RECEIVING CENTRE
I.S. CEN TR 14819-1:2004	SAFETY RECOMMENDATIONS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PREVENTION AND FIGHT AGAINST FIRE - PART 1: FUNICULAR RAILWAYS IN TUNNELS
PREN 14209 : DRAFT 2016	PREFORMED PLASTERBOARD CORNICES - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. CEN/TR 15123:2005	DESIGN, PREPARATION AND APPLICATION OF INTERNAL POLYMER PLASTERING SYSTEMS
I.S. EN 50518-1:2013	MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS
PREN 15254-7 : DRAFT 2016	EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING CEILINGS - PART 7: METAL SANDWICH PANEL CONSTRUCTION
BS EN 1634-1 : 2014	FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR AND SHUTTER ASSEMBLIES, OPENABLE WINDOWS AND ELEMENTS OF BUILDING HARDWARE - PART 1: FIRE RESISTANCE TEST FOR DOOR AND SHUTTER ASSEMBLIES AND OPENABLE WINDOWS
I.S. EN 16240:2013	LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
UNI EN 13200-7 : 2014	SPECTATOR FACILITIES - PART 7: ENTRY AND EXIT ELEMENTS AND ROUTES
UNI EN 15254-6 : 2014	EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 6: CURTAIN WALLING
I.S. EN 15269-3:2012	EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 3: FIRE RESISTANCE OF HINGED AND PIVOTED TIMBER DOORSETS AND OPENABLE
I.S. EN 15725:2010	EXTENDED APPLICATION REPORTS ON THE FIRE PERFORMANCE OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS
ISO/TS 20100:2008	Gaseous hydrogen Fuelling stations
PREN 14190 : DRAFT 2011	GYPSUM PLASTERBOARD PRODUCTS FROM PROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 13369:2013-08	COMMON RULES FOR PRECAST CONCRETE PRODUCTS
NF EN 1279-5 : 2005 + A2 2010	GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY
UNE-EN 15254-6:2015	Extended application of results from fire resistance tests - Non-loadbearing walls - Part 6: Curtain walling
PREN 14509 : DRAFT 2013	SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
I.S. EN 1634-2:2008	FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES AND ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE CHARACTERISATION TEST FOR ELEMENTS OF BUILDING HARDWARE
UNE-EN 15269-3:2016	Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows
PREN 1279-5 : DRAFT 2015	GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY
BS EN 1096-4:2004	GLASS IN BUILDING - COATED GLASS - PART 4: EVALUATION OF CONFORMITY/PRODUCT STANDARD
PREN 179 : DRAFT 2016	BUILDING HARDWARE - EMERGENCY EXIT DEVICES OPERATED BY A LEVER HANDLE OR PUSH PAD, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
UNI EN 15254-2 : 2009	EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS
UNI EN 15498 : 2008	PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
UNI EN 16035 : 2013	HARDWARE PERFORMANCE SHEET (HPS) - IDENTIFICATION AND SUMMARY OF TEST EVIDENCE TO FACILITATE THE INTER-CHANGEABILITY OF BUILDING HARDWARE FOR APPLICATION TO FIRE RESISTING AND/OR SMOKE CONTROL DOORSETS AND/OR OPENABLE WINDOWS
I.S. CEN TR 14819-2:2006	SAFETY RECOMMENDATIONS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PREVENTION AND FIGHT AGAINST FIRE - PART 2: OTHER FUNICULAR RAILWAYS AND OTHER INSTALLATIONS
UNE-EN 16034:2015	Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics
PREN 1443 : DRAFT 2017	CHIMNEYS - GENERAL REQUIREMENTS
PREN 13950 : DRAFT 2011	GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
PREN 13915 : DRAFT 2016	PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI CEI EN 45545-3 : 2013	RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS
PREN 81-58 : DRAFT 2016	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATION AND TESTS - PART 58: LANDING DOORS FIRE RESISTANCE TEST
EN 61936-1 : 2010 AMD 1 2014	POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES (IEC 61936-1:2010/A1:2014)
EN 1634-1:2014	Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 1: Fire resistance test for door and shutter assemblies and openable windows
EN 15269-11:2018	Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 11: Fire resistance for operable fabric curtains
I.S. EN 14509:2013	SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
I.S. EN 1279-5:2005	GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY
I.S. EN 15498:2008	PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
DIN EN 14179-2:2005-08	Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
DIN EN 12150-2:2005-01	Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard; German version EN 12150-2:2004
DIN EN 13063-3 E : 2007	CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 3: REQUIREMENTS AND TEST METHODS FOR AIR FLUE SYSTEM CHIMNEYS
DIN EN 12859:2011-05	Gypsum blocks - Definitions, requirements and test methods
DIN EN 1366-7:2004-09	Fire resistance tests for service installations - Part 7: Conveyor systems and their closures
DIN EN 1863-2:2005-01	Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard; German version EN 1863-2:2004
DIN EN 1125:2008-04	BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
DIN EN 13024-2:2005-01	Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard; German version EN 13024-2:2004
DIN EN 438-7:2005-04	High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes; German version EN 438-7:2005
DIN EN 14471 E : 2015	CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
DIN EN 13950:2014-09	GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 14449 E : 2005	GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - EVALUATION OF CONFORMITY - PRODUCT STANDARD
DIN EN 13915:2016-02 (Draft)	PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 13964:2014-08	SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
DIN EN 15319 E : 2007	GENERAL PRINCIPLES OF DESIGN OF FIBROUS (GYPSUM) PLASTER WORKS
UNE-EN 14509:2014	Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
BS EN 1125:2008	BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
BS EN 14178-2:2004	GLASS IN BUILDING - BASIC ALKALINE EARTH SILICATE GLASS PRODUCTS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
BS EN 14600:2005	DOORSETS AND OPENABLE WINDOWS WITH FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS - REQUIREMENTS AND CLASSIFICATION
BS EN 1520:2011	Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
UNE-EN 14250:2010	Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
BS EN 572-9:2004	Glass in building. Basic soda lime silicate glass products Evaluation of conformity/Product standard
BS EN 13069:2005	CHIMNEYS - CLAY/CERAMIC OUTER WALLS FOR SYSTEM CHIMNEYS - REQUIREMENTS AND TEST METHODS
UNE-EN 13830:2016	Curtain walling - Product standard
18/30359998 DC : 0	BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS
I.S. EN 14080:2013	TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS
EN 13830:2015	Curtain walling - Product standard
UNE-EN 15269-1:2011	Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 1: General requirements
UNE-EN 12859:2012	Gypsum blocks - Definitions, requirements and test methods
EN 15269-20:2009	Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 20: Smoke control for hinged and pivoted steel, timber and metal framed glazed doorsets
EN 15998:2010	Glass in building - Safety in case of fire, fire resistance - Glass testing methodology for the purpose of classification
EN 15283-1:2008+A1:2009	Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement
EN 1993-1-2:2005/AC:2009	EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 13964:2014	Suspended ceilings - Requirements and test methods
EN 16240:2013	Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
EN 14449:2005/AC:2005	GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - EVALUATION OF CONFORMITY/PRODUCT STANDARD
UNI EN 12859 : 2011	GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 14509 : 2013	SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
UNI EN 520 : 2009	GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
EN 15681-2:2017	Glass in Building - Basic alumino silicate glass products - Part 2: Product standard
UNI EN 14600 : 2006	DOORSETS AND OPENABLE WINDOWS WITH FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS - REQUIREMENTS AND CLASSIFICATION
EN 1125:2008	Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods
UNI EN 14449 : 2005	GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - EVALUATION OF CONFORMITY/PRODUCT STANDARD
UNI EN 1520 : 2011	Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non- structural reinforcement
UNI EN 14080 : 2013	TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS
UNI EN 1993-1-2 : 2005	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
UNI EN 1634-3 : 2005	FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR AND SHUTTER ASSEMBLIES, OPENABLE WINDOWS AND ELEMENTS OF BUILDING HARDWARE - PART 3: SMOKE CONTROL TEST FOR DOOR AND SHUTTER ASSEMBLIES
UNI EN 14190 : 2014	GYPSUM BOARD PRODUCTS FROM REPROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 13964 : 2014	SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
UNI EN 14250 : 2010	TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS
ONORM EN 1366-3 : 2009	FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS
UNI EN 1364-3 : 2014	FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 3: CURTAIN WALLING - FULL CONFIGURATION (COMPLETE ASSEMBLY)
UNI EN 1999-1-2 : 2007	EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN
UNI EN 14246 : 2006	GYPSUM ELEMENTS FOR SUSPENDED CEILINGS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 13279-1 : 2008	GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
UNI EN 13950 : 2014	GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 1364-4 : 2014	FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 4: CURTAIN WALLING - PART CONFIGURATION
UNI EN 179 : 2008	BUILDING HARDWARE - EMERGENCY EXIT DEVICES OPERATED BY A LEVER HANDLE OR PUSH PAD, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
UNI EN 1125 : 2008	BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
UNE-EN 50223:2016	Stationary electrostatic application equipment for ignitable flock material - Safety requirements
DIN EN 15683-2:2014-02	GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE CHANNEL SHAPED SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
17/30357430 DC	BS EN 13658-2. Metal lath and beads. Definitions, requirements and test methods. Part 2. External rendering
UNI EN 15725 : 2010	EXTENDED APPLICATION REPORTS ON THE FIRE PERFORMANCE OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS
04/30111056 DC : DRAFT MARCH 2004	EN 1806 - CHIMNEYS - CLAY/CERAMIC FLUE BLOCKS FOR SINGLE WALL CHIMNEYS - REQUIREMENTS AND TEST METHODS
EN 303-5:2012	Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
DIN EN 16351:2015-12	Timber structures - Cross laminated timber - Requirements
I.S. EN 15497:2014	STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
UNE-EN 13915:2018	Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods
11/30249114 DC : 0	BS EN 15497 - STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
DIN EN 16309:2014-12	SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY
I.S. EN 15269-11:2018+AC:2019	EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 11: FIRE RESISTANCE FOR OPERABLE FABRIC CURTAINS
BS EN 15080-8:2009	Extended application of results from fire resistance tests Beams
UNI CEI CEN/TS 45545-3 : 2009	RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS
DIN EN 1364-5 E : 2017	FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 5: AIR TRANSFER GRILLES
DIN EN 16034:2014-12	PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND OPENABLE WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTANCE AND/OR SMOKE CONTROL CHARACTERISTICS
04/30124508 DC : 0	EN 15080-12 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 12: PENETRATION SEALS
DIN EN 15498 E : 2008	PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
16/30330690 DC : 0	BS EN 15254-7 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING CEILINGS - PART 7: METAL SANDWICH PANEL CONSTRUCTION
PREN 13369 : DRAFT 2017	COMMON RULES FOR PRECAST CONCRETE PRODUCTS
DIN EN 15254-5 E : 2010	EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 5: METAL SANDWICH PANEL CONSTRUCTION
07/30172842 DC : 0	BS EN 15080-12 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 12: LOADBEARING MASONRY WALLS
13/30263194 DC : 0	BS EN 16623 - PAINTS AND VARNISHES - REACTIVE COATINGS FOR FIRE PROTECTION OF METALLIC SUBSTRATES - DEFINITIONS, REQUIREMENTS, CHARACTERISTICS AND MARKING
CEN/TR 12101-4:2009	Smoke and heat control systems - Part 4: Installed SHEVS systems for smoke and heat ventilation
17/30360667 DC : DRAFT SEP 2017	BS EN 1748-2-2 - GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - GLASS CERAMICS - PART 2-2: PRODUCT STANDARD
13/30288842 DC : 0	BS EN 14081-1 - TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 1: GENERAL REQUIREMENTS
DIN EN 15998:2011-02	GLASS IN BUILDING - SAFETY IN CASE OF FIRE, FIRE RESISTANCE - GLASS TESTING METHODOLOGY FOR THE PURPOSE OF CLASSIFICATION
DIN EN 1634-2:2009-05	FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES AND ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE CHARACTERISATION TEST FOR ELEMENTS OF BUILDING HARDWARE
00/107014 DC : DRAFT OCT 2000	PREN 520 - GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 15080-8:2010-02	Extended application of results from fire resistance tests - Part 8: Beams
UNI EN 15080-8 : 2009	EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 8: BEAMS
DIN EN 16240:2014-03	LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
17/30357433 DC	BS EN 13279-1. Gypsum binders and gypsum plasters. Part 1. Definitions and requirements
I.S. EN 16351:2015	TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS
PREN 14496 : DRAFT 2016	GYPSUM BASED ADHESIVES FOR THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS AND GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
PREN 50583 : DRAFT 2012	PHOTOVOLTAICS IN BUILDINGS
UNE-EN 13369:2013	Common rules for precast concrete products
BS EN 15998:2010	Glass in building. Safety in case of fire, fire resistance. Glass testing methodology for the purpose of classification
DIN EN 14509 E : 2013	SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
11/30252455 DC : 0	BS EN 1364-4 - FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 4: CURTAIN WALLING - PART CONFIGURATION
05/30135869 DC : 0	EN 15283-1 - GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT
11/30252458 DC : 0	BS EN 1364-3 - FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 3: CURTAIN WALLING - FULL CONFIGURATION (COMPLETE ASSEMBLY)
I.S. EN 1090-1:2009	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS
I.S. EN 1999-1-2:2007	EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX)
UNI EN 15882-3 : 2009	EXTENDED APPLICATIONS OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS
17/30357427 DC	BS EN 13658-1. Metal lath and beads. Definitions, requirements and test methods. Part 1. Internal plastering
BS EN 12602:2016	Prefabricated reinforced components of autoclaved aerated concrete
UNI EN 15882-4 : 2012	EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 4: LINEAR JOINT SEALS
I.S. CEN/TR 15124:2005	DESIGN, PREPARATION AND APPLICATION OF INTERNAL GYPSUM PLASTERING SYSTEMS
PREN 14179-2 : DRAFT 2017	GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 2: PRODUCT STANDARD
I.S. EN 15254-6:2014	EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 6: CURTAIN WALLING
XP CEN/TS 45545-3 : 2009 XP	RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS
BS EN 15254-7:2012	Extended application of results from fire resistance tests. Non-loadbearing ceilings Metal sandwich panel construction
I.S. EN 15683-2:2013	GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE CHANNEL SHAPED SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
I.S. EN 15287-2:2008	CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 2: CHIMNEYS FOR ROOMSEALED APPLIANCES
I.S. EN 15882-4:2012	EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 4: LINEAR JOINT SEALS
S.R. CEN/TS 45545-3:2009	RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS
PREN 845-2 : DRAFT 2012	SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
EN 81-58:2018	Safety rules for the construction and installation of lifts - Examination and tests - Part 58: Landing doors fire resistance test
15/30324901 DC : 0	BS EN 1504-3 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS
16/30343246 DC : 0	BS EN 1125 - BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
UNI EN 15254-7 : 2012	EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING CEILINGS - PART 7: METAL SANDWICH PANEL CONSTRUCTION
15/30327624 DC : 0	BS EN 15269-6 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 6: FIRE RESISTANCE OF SLIDING TIMBER DOORSETS
PREN 15254-5 : DRAFT 2016	EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 5: METAL SANDWICH PANEL CONSTRUCTION
PREN 12859 : DRAFT 2010	GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
EN 15254-7:2018	Extended application of results from fire resistance tests - Non-loadbearing ceilings - Part 7: Metal sandwich panel construction
I.S. EN 61936-1:2010	POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES
EN 13369:2018	Common rules for precast concrete products
I.S. CEN TR 12101-4:2006	SMOKE AND HEAT CONTROL SYSTEMS - PART 4: INSTALLED SHEVS SYSTEMS FOR SMOKE AND HEAT VENTILATION
I.S. EN 15882-3:2009	EXTENDED APPLICATIONS OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS
I.S. EN 81-58:2018	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATION AND TESTS - PART 58: LANDING DOORS FIRE RESISTANCE TEST
I.S. EN 13279-1:2008	GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
DIN EN 13063-1 E : 2007	CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 1: REQUIREMENTS AND TEST METHODS FOR SOOTFIRE RESISTANCE
DIN EN 14915 E : 2013	SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, REQUIREMENTS AND MARKING
DIN EN 14209:2016-02 (Draft)	PREFORMED PLASTERBOARD CORNICES - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 14190:2014-09	Gypsum board products from reprocessing - Definitions, requirements and test methods
DIN EN 14496 E : 2017	GYPSUM BASED ADHESIVES FOR THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS AND GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 14081-1:2016-06	TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 1: GENERAL REQUIREMENTS
DIN EN 14080:2013-09	TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS
DIN EN 1634-3:2005-01	FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR AND SHUTTER ASSEMBLIES, OPENABLE WINDOWS AND ELEMENTS OF BUILDING HARDWARE - PART 3: SMOKE CONTROL TEST FOR DOOR AND SHUTTER ASSEMBLIES
BS EN 1863-2:2004	GLASS IN BUILDING - HEAT STRENGTHENED SODA LIME SILICATE GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
BS EN 13658-1:2005	Metal lath and beads. Definitions, requirements and test methods Internal plastering
BS EN 13950:2014	Gypsum board thermal/acoustic insulation composite panels. Definitions, requirements and test methods
BS EN 13915:2017	Prefabricated gypsum plasterboard panels with a cellular paperboard core. Definitions, requirements and test methods
BS EN 13815:2006	FIBROUS GYPSUM PLASTER CASTS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
BS EN 14209:2017	Preformed plasterboard cornices. Definitions, requirements and test methods
EN 15269-1:2010	Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 1: General requirements
BS EN 1364-4:2014	Fire resistance tests for non-loadbearing elements Curtain walling. Part configuration
UNE-EN 16351:2016	Timber structures - Cross laminated timber - Requirements
BS EN 1366-3:2009	Fire resistance tests for service installations Penetration seals
11/30211394 DC : DRAFT MAR 2011	BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS
UNE-EN 14081-1:2016	Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements
DIN EN 15319:2007-10	General principles of design of fibrous (gypsum) plaster works
UNE-EN 14190:2014	Gypsum board products from reprocessing - Definitions, requirements and test methods
DIN EN 15318 E : 2008	DESIGN AND APPLICATION OF GYPSUM BLOCKS
BS EN 13063-1:2005	CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 1: REQUIREMENTS AND TEST METHODS FOR SOOTFIRE RESISTANCE
UNE-EN 12209:2017	Building hardware - Mechanically operated locks and locking plates - Requirements and test methods
UNE EN 15287-1 : 0	CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES
BS EN 13279-1:2008	GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
BS EN 14321-2:2005	GLASS IN BUILDING - THERMALLY TOUGHENED ALKALINE EARTH SILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
BS EN 15318:2007	DESIGN AND APPLICATION OF GYPSUM BLOCKS
BS EN 14250:2010	Timber structures. Product requirements for prefabricated structural members assembled with punched metal plate fasteners
UNE EN 16309 : 0	SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY
17/30326406 DC : 0	BS EN 17168 - RAILWAY APPLICATIONS - PLATFORM BARRIER SYSTEMS
BS EN 61936-1 : 2010	POWER INSTALLATIONS EXCEEDING 1 KV A.C - PART 1: COMMON RULES
BS EN 1364-3:2014	Fire resistance tests for non-loadbearing elements Curtain walling. Full configuration (complete assembly)
BS EN 12391-1:2003	Chimneys. Execution standard for metal chimneys Chimneys for non-roomsealed heating appliances
BS EN 14246:2006	Gypsum elements for suspended ceilings. Definitions, requirements and test methods
BS EN 13830:2015	Curtain walling. Product standard
BS EN 1748-1-2:2004	GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - BOROSILICATE GLASSES - PART 1-2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
BS EN 14080:2013	Timber structures. Glued laminated timber and glued solid timber. Requirements
UNE-EN 1364-4:2015	Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration
BS EN 14449:2005	Glass in building. Laminated glass and laminated safety glass. Evaluation of conformity/product standard
BS EN 12859:2011	GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNE-EN 14209:2017	Preformed plasterboard cornices - Definitions, requirements and test methods
BS EN 1748-2-2:2004	GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - PART 2-2: GLASS CERAMICS - EVALUATION OF CONFORMITY/PRODUCT STANDARD
EN 14190:2014	Gypsum board products from reprocessing - Definitions, requirements and test methods
EN 15269-10:2011	Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements of building hardware - Part 10: Fire resistance of steel rolling shutter assemblies
EN 15882-4:2012	Extended application of results from fire resistance tests for service installations - Part 4: Linear joint seals
EN 13950:2014	Gypsum board thermal/acoustic insulation composite panels - Definitions, requirements and test methods
EN 845-2:2013+A1:2016	SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
EN 15269-3:2012	Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows
EN 15283-2:2008+A1:2009	Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards
EN 14080:2013	Timber structures - Glued laminated timber and glued solid timber - Requirements
EN 15269-5:2014+A1:2016	Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 5: Fire resistance of hinged and pivoted metal framed glazed doorsets and openable windows
EN 16153:2013+A1:2015	Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
EN 14471:2013+A1:2015	CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
EN 16034:2014	Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics
EN 14963:2006	Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods
EN 13658-2:2005	Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering
UNI EN 1366-3 : 2009	FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS
EN 14178-2:2004	Glass in building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard
EN 520:2004+A1:2009