I.S. EN 15649-1:2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
Hardcopy , PDF
29-10-2017
English
01-01-2009
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
0 Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and criteria to distinguish floating
leisure articles from aquatic toys
5 General safety requirements and test methods
related to all classes
6 Material requirements and test methods
7 Durability of warnings and markings
Annex A (normative) - Templates
Annex B (informative) - Examples of openings
Bibliography
Defines safety requirements and test methods related to materials, safety, performance for classified floating leisure articles for use on and in water.
| DevelopmentNote |
2009 Edition Re-Issued in December 2013 & incorporates AMD 2 2013. (01/2014)
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| Standards | Relationship |
| EN 15649-1:2009+A2:2013 | Identical |
| EN ISO 6185-1:2001 | Inflatable boats - Part 1: Boats with a maximum motor power rating of 4,5 kW (ISO 6185-1:2001) |
| EN 13138-3:2014 | Buoyant aids for swimming instruction - Part 3: Safety requirements and test methods for swim seats to be worn |
| ISO 7619-1:2010 | Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness) |
| EN ISO 6185-2:2001 | Inflatable boats - Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive (ISO 6185-2:2001) |
| ISO 105-E04:2013 | Textiles — Tests for colour fastness — Part E04: Colour fastness to perspiration |
| ISO 4675:2017 | Rubber- or plastics-coated fabrics — Low-temperature bend test |
| ISO 105-A03:1993 | Textiles Tests for colour fastness Part A03: Grey scale for assessing staining |
| 89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
| EN 16051-1:2012 | Inflation devices and accessories for inflatable consumer products - Part 1: Compatibility of valves and valve adapters |
| EN 12402:1999 | Lead and lead alloys - Methods of sampling for analysis |
| EN ISO 105-E04:2013 | Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (ISO 105-E04:2013) |
| ISO 6185-1:2001 | Inflatable boats Part 1: Boats with a maximum motor power rating of 4,5 kW |
| ISO 2411:2017 | Rubber- or plastics-coated fabrics — Determination of coating adhesion |
| EN 15649-2:2009+A2:2013 | Floating leisure articles for use on and in the water - Part 2: Consumer information |
| 1994/25/EC : 1994 | DIRECTIVE 94/25/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 16 JUNE 1994 ON THE APPROXIMATION OF THE LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO RECREATIONAL CRAFT |
| EN 13138-2:2014 | Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held |
| EN ISO 105-E03:2010 | Textiles - Tests for colour fastness - Part E03: Colour fastness to chlorinated water (swimming-pool water) (ISO 105-E03:2010) |
| ISO 105-E03:2010 | Textiles Tests for colour fastness Part E03: Colour fastness to chlorinated water (swimming-pool water) |
| ISO 6185-3:2014 | Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater |
| EN 71-1:2014 | Safety of toys - Part 1: Mechanical and physical properties |
| EN ISO 2411:2017 | Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2017) |
| EN 16051-2:2012 | Inflation devices and accessories for inflatable consumer products - Part 2: Safety requirements, durability, performance, compatibility and test methods of inflators |
| EN 14960:2013 | Inflatable play equipment - Safety requirements and test methods |
| EN ISO 6185-3:2014 | Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
| ISO 105-X12:2016 | Textiles Tests for colour fastness Part X12: Colour fastness to rubbing |
| EN 20105-A03:1994 | Textiles - Tests of colour fastness - Part A03: Grey scale for assessing staining (ISO 105-A03:1993) |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| EN ISO 3696:1995 | Water for analytical laboratory use - Specification and test methods (ISO 3696:1987) |
| EN 20105-A02:1994 | Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993) |
| EN ISO 105-X12:2016 | Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing (ISO 105-X12:2016) |
| ISO 554:1976 | Standard atmospheres for conditioning and/or testing — Specifications |
| ISO 105-A02:1993 | Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour |
| EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| ISO 6185-2:2001 | Inflatable boats Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive |
| ISO 3011:1997 | Rubber- or plastics-coated fabrics Determination of resistance to ozone cracking under static conditions |
| EN 13138-1:2014 | Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.