I.S. EN 15651-1:2017
Current
The latest, up-to-date edition.
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 1: SEALANTS FOR FACADE ELEMENTS
Hardcopy , PDF
English
01-01-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
National Foreword
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Durability
6 Sampling
7 Assessment and verification of constancy of
performance
8 Marking and labelling
Annex A (informative) - Example on the frequency
of tests for factory production control
Annex ZA (informative) Relationship of this European
Standard with Regulation (EU) No.305/2011
Bibliography
Describes definitions and requirements for non-structural facade sealants intended for sealing exterior wall joints, window and door perimeter joints in building construction, including the interior face.
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 15651-1:2017 | Identical |
| DIN EN 15651-1:2017-07 | Equivalent |
| BS EN 15651-1:2017 | Equivalent |
| ISO 2811-1:2016 | Paints and varnishes — Determination of density — Part 1: Pycnometer method |
| ISO 9047:2001 | Building construction — Jointing products — Determination of adhesion/cohesion properties of sealants at variable temperatures |
| ISO 6927:2012 | Buildings and civil engineering works — Sealants — Vocabulary |
| EN ISO 7389:2003 | Building construction - Jointing products - Determination of elastic recovery of sealants (ISO 7389:2002) |
| EN ISO 7390:2003 | Building construction - Jointing products - Determination of resistance to flow of sealants (ISO 7390:2003) |
| EN ISO 9046:2004 | Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature (ISO 9046:2002) |
| ISO 7389:2002 | Building construction — Jointing products — Determination of elastic recovery of sealants |
| ISO 11925-2:2010 | Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Single-flame source test |
| ISO 10590:2005 | Building construction — Sealants —- Determination of tensile properties of sealants at maintained extension after immersion in water |
| ISO 11600:2002 | Building construction — Jointing products — Classification and requirements for sealants |
| ISO 7390:2002 | Building construction — Jointing products — Determination of resistance to flow of sealants |
| EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| EN ISO 10591:2005 | Building construction - Sealants - Determination of adhesion/cohesion properties of sealants after immersion in water (ISO 10591:2005) |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN ISO 2811-1:2016 | Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
| ISO 10563:2017 | Buildings and civil engineering works — Sealants — Determination of change in mass and volume |
| EN ISO 10590:2005 | Building construction - Sealants - Determination of tensile properties of sealants at maintained extension after immersion in water (ISO 10590:2005) |
| EN 15651-5:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 5: Assessment and verification of constancy of performance, marking and labelling |
| ISO 10591:2005 | Building construction — Sealants — Determination of adhesion/cohesion properties of sealants after immersion in water |
| ISO 8340:2005 | Building construction — Sealants — Determination of tensile properties at maintained extension |
| ISO 13640:1999 | Building construction — Jointing products — Specifications for test substrates |
| EN ISO 6927:2012 | Buildings and civil engineering works - Sealants - Vocabulary (ISO 6927:2012) |
| ISO 9046:2002 | Building construction — Jointing products — Determination of adhesion/cohesion properties of sealants at constant temperature |
| EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| EN ISO 8339:2005 | Building construction - Sealants - Determination of tensile properties (Extension to break) (ISO 8339:2005) |
| EN ISO 10563:2017 | Buildings and civil engineering works - Sealants - Determination of change in mass and volume (ISO 10563:2017) |
| ISO 8339:2005 | Building construction — Sealants — Determination of tensile properties (Extension to break) |
| EN ISO 8340:2005 | Building construction - Sealants - Determination of tensile properties at maintained extension (ISO 8340:2005) |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
| ISO 3507:1999 | Laboratory glassware — Pyknometers |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.