I.S. EN 15863:2015
Current
The latest, up-to-date edition.
CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERIZATION - DYNAMIC MONOLITHIC LEACHING TEST WITH PERIODIC LEACHANT RENEWAL, UNDER FIXED CONDITIONS
Hardcopy , PDF
English
01-01-2015
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Reagents
6 Equipment
7 Sample preparation
8 Procedure
9 Calculations
10 Performance characteristics
11 Documentation and test report
Annex A (informative) - Identification of release mechanisms and use
of test results
Annex B (informative) - Assessment of release mechanisms (if required)
Annex C (informative) - Examples of data about the L/A ratio
Annex D (informative) - Process map for EN 15863
Annex E (informative) - Repeatability and reproducibility data
Bibliography
Pertains for determining the leaching behaviour of monolithic wastes under dynamic conditions.
| DevelopmentNote |
Supersedes SR CEN/TS 15863. (04/2015)
|
| DocumentType |
Standard
|
| Pages |
66
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 15863:2015 | Identical |
| EN 12457-2:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction) |
| CEN/TS 16637-2:2014 | Construction products - Assessment of release of dangerous substances - Part 2: Horizontal dynamic surface leaching test |
| ENV 12920 : 1997 | CHARACTERIZATION OF WASTE - METHODOLOGY FOR THE DETERMINATION OF THE LEACHING BEHAVIOUR OF WASTE UNDER SPECIFIED CONDITIONS |
| EN 14997:2015 | Characterization of waste - Leaching behaviour test - Influence of pH on leaching with continuous pH control |
| NEN 7345 : 1995 | LEACHING CHARACTERISTICS OF SOLID EARTHY AND STONY BUILDING AND WASTE MATERIALS - LEACHING TESTS - DETERMINATION OF THE LEACHING OF INORGANIC COMPONENTS FROM BUILDINGS AND MONOLITIC WASTE MATERIALS WITH THE DIFFUSION TEST |
| EN 12457-4:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction) |
| EN 14346:2006 | Characterization of waste - Calculation of dry matter by determination of dry residue or water content |
| ISO 5667-3:2012 | Water quality Sampling Part 3: Preservation and handling of water samples |
| CEN/TS 15864:2015 | Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s) |
| EN 12457-1:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| EN 16192:2011 | Characterization of waste - Analysis of eluates |
| EN ISO 5667-3:2012 | Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012) |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| EN 12920:2006+A1:2008 | Characterization of waste - Methodology for the determination of the leaching behaviour of waste under specified conditions |
| EN ISO 3696:1995 | Water for analytical laboratory use - Specification and test methods (ISO 3696:1987) |
| EN 15002:2015 | Characterization of waste - Preparation of test portions from the laboratory sample |
| EN 12457-3:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
| CEN/TS 14405 : 2004 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TESTS - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS) |
| CEN/TS 15862:2012 | Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions |
| EN 14899:2005 | Characterization of waste - Sampling of waste materials - Framework for the preparation and application of a Sampling Plan |
| EN 14429:2015 | Characterization of waste - Leaching behaviour test - Influence of pH on leaching with initial acid/base addition |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.