I.S. EN 16516:2017
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
CONSTRUCTION PRODUCTS: ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR
Hardcopy , PDF
31-01-2021
English
01-01-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Intended conditions of use, emission
scenarios and European reference room
5 Product sampling and transport to the
laboratory
6 Handling of product samples in the
laboratory
7 Test chamber conditions
8 Determination of vapour-phase organic
compounds in test chamber air
9 Calculation of specific emission rates and
expression of results at the reference room
10 Reporting for the horizontal reference method
11 Indirect methods
Annex A (informative) - Repeatability and reproducibility
Annex B (informative) - Examples of indirect methods
(also called simplified, screening, secondary, derived
or alternative methods)
Annex C (informative) - Information on very volatile organic
compound (VVOC) testing
Annex D (informative) - Example of a form for the sampling
report
Annex E (informative) - Example form for a chain of custody
report
Annex F (informative) - Benzene artefact generation on Tenax
Annex G (normative) - List of non-carcinogenic VOCs
Annex H (informative) - List of carcinogenic VOCs
Bibliography
Defines a horizontal reference method for the determination of emissions of regulated dangerous substances from construction products into indoor air.
| DevelopmentNote |
Supersedes SR CEN/TS 16516. (10/2017)
|
| DocumentType |
Standard
|
| Pages |
68
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| EN 16516:2017 | Identical |
| ASTM D 7706 : 2017 : REDLINE | Standard Practice for Rapid Screening of VOC Emissions from Products Using Micro-Scale Chambers |
| CEN/TS 16516:2013 | Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air |
| ISO 11074:2015 | Soil quality — Vocabulary |
| EN ISO 12460-5:2015 | Wood-based panels - Determination of formaldehyde release - Part 5: Extraction method (called the perforator method) (ISO 12460-5:2015) |
| EN ISO 12460-4:2016 | Wood-based panels - Determination of formaldehyde release - Part 4: Desiccator method (ISO 12460-4:2016) |
| EN ISO 11890-2:2013 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2013) |
| VDA 278 : 2011 | THERMAL DESORPTION ANALYSIS OF ORGANIC EMISSIONS FOR THE CHARACTERIZATION OF NON-METALLIC MATERIALS FOR AUTOMOBILES |
| EN 717-1:2004 | Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
| ISO 12219-3:2012 | Interior air of road vehicles — Part 3: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Micro-scale chamber method |
| EN ISO 16017-1:2000 | Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling (ISO 16017-1:2000) |
| EN ISO 12460-3:2015 | Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO 12460-3:2015) |
| ISO 13137:2013 | Workplace atmospheres — Pumps for personal sampling of chemical and biological agents — Requirements and test methods |
| EN 717-3:1996 | Wood-based panels - Determination of formaldehyde release - Part 3: Formaldehyde release by the flask method |
| EN 14662-1:2005 | Ambient air quality - Standard method for measurement of benzene concentrations - Part 1 : Pumped sampling followed by thermal desorption and gas chromatography |
| ISO 16017-1:2000 | Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography — Part 1: Pumped sampling |
| ASTM D 5582 : 2014 : REDLINE | Standard Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator |
| EN ISO 13137:2013 | Workplace atmospheres - Pumps for personal sampling of chemical and biological agents - Requirements and test methods (ISO 13137:2013) |
| VDA 277 : 1995 | NICHTMETALLISCHE WERKSTOFFE DER KFZ-INNENAUSSTATTUNG - BESTIMMUNG DER EMISSION ORGANISCHER VERBINDUNGEN |
| EN ISO 16000-11:2006 | Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006) |
| ISO 11890-1:2007 | Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method |
| CEN/TR 16220:2011 | Construction products - Assessment of release of dangerous substances - Complement to sampling |
| ISO 12460-4:2016 | Wood-based panels Determination of formaldehyde release Part 4: Desiccator method |
| EN 16687:2015 | Construction products - Assessment of release of dangerous substances - Terminology |
| ISO 16000-9:2006 | Indoor air — Part 9: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test chamber method |
| EN ISO 17895:2005 | Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) (ISO 17895:2005) |
| CEN/TR 16496:2013 | Construction Products - Assessment of release of dangerous substances - Use of harmonised horizontal assessment methods |
| ISO 12460-3:2015 | Wood-based panels Determination of formaldehyde release Part 3: Gas analysis method |
| EN ISO 11890-1:2007 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) |
| ISO 16000-3:2011 | Indoor air — Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air — Active sampling method |
| ISO 12460-1:2007 | Wood-based panels Determination of formaldehyde release Part 1: Formaldehyde emission by the 1-cubic-metre chamber method |
| VDI 2083 Blatt 17:2013-06 | Cleanroom technology - Compatibility of materials with the required cleanliness |
| ISO 12460-5:2015 | Wood-based panels Determination of formaldehyde release Part 5: Extraction method (called the perforator method) |
| ISO 554:1976 | Standard atmospheres for conditioning and/or testing — Specifications |
| ISO 11890-2:2013 | Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method |
| ISO 16000-11:2006 | Indoor air — Part 11: Determination of the emission of volatile organic compounds from building products and furnishing — Sampling, storage of samples and preparation of test specimens |
| ISO 16000-6:2011 | Indoor air Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID |
| ISO 17895:2005 | Paints and varnishes — Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.