I.S. EN 16723-1:2016
Current
The latest, up-to-date edition.
NATURAL GAS AND BIOMETHANE FOR USE IN TRANSPORT AND BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK - PART 1: SPECIFICATIONS FOR BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK
Hardcopy , PDF
English
01-01-2016
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Parameters and test methods
5 Sampling
Annex A (informative) - Parameters
Annex B (informative) - Odorization and sulfur
Annex C (informative) - Examples of different
compliance schemes
Annex D (informative) - A-deviations
Bibliography
Describes the requirements and test methods for biomethane at the point of entry into natural gas networks.
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 16723-1:2016 | Identical |
| ISO 10715:1997 | Natural gas — Sampling guidelines |
| EN ISO 6326-1:2009 | Natural gas - Determination of sulfur compounds - Part 1: General introduction (ISO 6326-1:2007) |
| EN ISO 13443:2005 | Natural gas - Standard reference conditions (ISO 13443:1996 including Corrigendum 1:1997) |
| ISO 6976:2016 | Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition |
| ISO 6327:1981 | Gas analysis — Determination of the water dew point of natural gas — Cooled surface condensation hygrometers |
| EN ISO 6327:2008 | Gas analysis - Determination of the water dew point of natural gas - Cooled surface condensation hygrometers (ISO 6327:1981) |
| EN ISO 18453:2005 | Natural gas - Correlation between water content and water dew point (ISO 18453:2004) |
| EN ISO 10101-1:1998 | Natural gas - Determination of water by the Karl Fischer method - Part 1: Introduction (ISO 10101-1:1993) |
| EN ISO 6326-5:1997 | Natural gas - Determination of sulfur compounds - Part 5: Lingener combustion method (ISO 6326-5:1989) |
| ISO/TR 12148:2009 | Natural gas — Calibration of chilled mirror type instruments for hydrocarbon dewpoint (liquid formation) |
| EN 16726:2015 | Gas infrastructure - Quality of gas - Group H |
| NEN 2826 : 1999 | AIR QUALITY - STATIONARY SOURCES EMISSIONS - SAMPLING AND DETERMINATION OF GASEOUS AMMONIA CONTENT |
| ISO 15713:2006 | Stationary source emissions Sampling and determination of gaseous fluoride content |
| EN ISO 16017-1:2000 | Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling (ISO 16017-1:2000) |
| ISO/TR 11150:2007 | Natural gas - Hydrocarbon dew point and hydrocarbon content |
| ISO 6975:1997 | Natural gas — Extended analysis — Gas-chromatographic method |
| ISO 8573-2:2007 | Compressed air Part 2: Test methods for oil aerosol content |
| ISO 16017-1:2000 | Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography — Part 1: Pumped sampling |
| ISO 10101-1:1993 | Natural gas — Determination of water by the Karl Fischer method — Part 1: Introduction |
| ISO 15403-1:2006 | Natural gas Natural gas for use as a compressed fuel for vehicles Part 1: Designation of the quality |
| EN ISO 10101-2:1998 | Natural gas - Determination of water by the Karl Fischer method - Part 2: Titration procedure (ISO 10101-2:1993) |
| ISO 14532:2014 | Natural gas — Vocabulary |
| EN 1911:2010 | Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method |
| ISO 10101-2:1993 | Natural gas — Determination of water by the Karl Fischer method — Part 2: Titration procedure |
| ISO 13443:1996 | Natural gas Standard reference conditions |
| ISO 10101-3:1993 | Natural gas — Determination of water by the Karl Fischer method — Part 3: Coulometric procedure |
| EN ISO 6326-3:1997 | Natural gas - Determination of sulfur compounds - Part 3: Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry (ISO 6326-3:1989) |
| ISO 6326-1:2007 | Natural gas Determination of sulfur compounds Part 1: General introduction |
| NFX 43 303 : 2011 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF AMMONIA (NH3) |
| EN ISO 14532:2017 | Natural gas - Vocabulary (ISO 14532:2014) |
| ISO 23874:2006 | Natural gas Gas chromatographic requirements for hydrocarbon dewpoint calculation |
| NFX 43 304 : 2007 | STATIONARY SOURCE EMISSIONS - MEASUREMENT OF THE CONCENTRATION OF FLUORINATED COMPOUNDS, EXPRESSED IN HYDROFLUORIC ACID (HF) - MANUAL METHOD |
| EN ISO 6975:2005 | Natural gas - Extended analysis - Gas-chromatographic method (ISO 6975:1997) |
| ISO 6326-5:1989 | Natural gas Determination of sulfur compounds Part 5: Lingener combustion method |
| EN ISO 6976:2016 | Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016) |
| EN ISO 10715:2000 | Natural gas - Sampling guidelines (ISO 10715:1997) |
| ISO 6326-3:1989 | Natural gas Determination of sulfur compounds Part 3: Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry |
| ISO 8573-4:2001 | Compressed air Part 4: Test methods for solid particle content |
| ISO 19739:2004 | Natural gas — Determination of sulfur compounds using gas chromatography |
| ISO 18453:2004 | Natural gas — Correlation between water content and water dew point |
| EN ISO 15403-1:2008 | Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality (ISO 15403-1:2006) |
| EN ISO 10101-3:1998 | Natural gas - Determination of water by the Karl Fischer method - Part 3: Coulometric procedure (ISO 10101-3:1993) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.