I.S. EN 16723-2:2017
Current
Current
The latest, up-to-date edition.
NATURAL GAS AND BIOMETHANE FOR USE IN TRANSPORT AND BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK - PART 2: AUTOMOTIVE FUELS SPECIFICATION
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
25-06-2017
Publisher
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Parameters and test methods
5 Sampling
6 Marking, labelling and packaging
Annex A (informative) - Parameters
Annex B (informative) - Odorization and sulfur
Annex C (informative) - Properties of gases at the
extremities of the Wobbe index ranges of
the gas groups for gases of the second family
Annex D (informative) - Voluntary dedicated grades
Bibliography
Defines the requirements and test methods for natural gas (group L and H, as in EN 437), biomethane and blends of both at the point of use as automotive fuels.
| Committee |
TC 408
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 16723-2:2017 | Identical |
| ISO 10715:1997 | Natural gas — Sampling guidelines |
| EN ISO 6974-6:2005 | Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns (ISO 6974-6:2002) |
| EN ISO 6326-1:2009 | Natural gas - Determination of sulfur compounds - Part 1: General introduction (ISO 6326-1:2007) |
| EN ISO 13443:2005 | Natural gas - Standard reference conditions (ISO 13443:1996 including Corrigendum 1:1997) |
| ISO 6974-6:2002 | Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns |
| ISO 6976:2016 | Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition |
| ISO 15971:2008 | Natural gas Measurement of properties Calorific value and Wobbe index |
| ISO 6327:1981 | Gas analysis — Determination of the water dew point of natural gas — Cooled surface condensation hygrometers |
| EN ISO 6327:2008 | Gas analysis - Determination of the water dew point of natural gas - Cooled surface condensation hygrometers (ISO 6327:1981) |
| EN ISO 18453:2005 | Natural gas - Correlation between water content and water dew point (ISO 18453:2004) |
| ISO 6974-2:2012 | Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 2: Uncertainty calculations |
| ISO 6974-4:2000 | Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns |
| EN ISO 6326-5:1997 | Natural gas - Determination of sulfur compounds - Part 5: Lingener combustion method (ISO 6326-5:1989) |
| EN ISO 6974-5:2014 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+ hydrocarbons (ISO 6974-5:2014) |
| ISO/TR 12148:2009 | Natural gas — Calibration of chilled mirror type instruments for hydrocarbon dewpoint (liquid formation) |
| EN 16726:2015 | Gas infrastructure - Quality of gas - Group H |
| ISO 15713:2006 | Stationary source emissions Sampling and determination of gaseous fluoride content |
| ISO/TR 11150:2007 | Natural gas - Hydrocarbon dew point and hydrocarbon content |
| ISO 6975:1997 | Natural gas — Extended analysis — Gas-chromatographic method |
| ISO 6974-3:2000 | Natural gas Determination of composition with defined uncertainty by gas chromatography Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns |
| ISO 15403-1:2006 | Natural gas Natural gas for use as a compressed fuel for vehicles Part 1: Designation of the quality |
| EN ISO 15971:2014 | Natural gas - Measurement of properties - Calorific value and Wobbe index (ISO 15971:2008) |
| EN 437:2003+A1:2009 | Test gases - Test pressures - Appliance categories |
| ISO 14532:2014 | Natural gas — Vocabulary |
| EN ISO 6974-2:2012 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012) |
| ISO 13443:1996 | Natural gas Standard reference conditions |
| ISO 10101-3:1993 | Natural gas — Determination of water by the Karl Fischer method — Part 3: Coulometric procedure |
| EN ISO 6326-3:1997 | Natural gas - Determination of sulfur compounds - Part 3: Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry (ISO 6326-3:1989) |
| ISO 6326-1:2007 | Natural gas Determination of sulfur compounds Part 1: General introduction |
| EN ISO 14532:2017 | Natural gas - Vocabulary (ISO 14532:2014) |
| ISO 23874:2006 | Natural gas Gas chromatographic requirements for hydrocarbon dewpoint calculation |
| EN ISO 6975:2005 | Natural gas - Extended analysis - Gas-chromatographic method (ISO 6975:1997) |
| ISO 6974-1:2012 | Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 1: General guidelines and calculation of composition |
| EN 16942:2016 | Fuels - Identification of vehicle compatibility - Graphical expression for consumer information |
| EN ISO 6974-4:2001 | Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns (ISO 6974-4:2000) |
| ISO 6326-5:1989 | Natural gas Determination of sulfur compounds Part 5: Lingener combustion method |
| EN ISO 6976:2016 | Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016) |
| EN ISO 10715:2000 | Natural gas - Sampling guidelines (ISO 10715:1997) |
| ISO 6326-3:1989 | Natural gas Determination of sulfur compounds Part 3: Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry |
| ISO 19739:2004 | Natural gas — Determination of sulfur compounds using gas chromatography |
| ISO 18453:2004 | Natural gas — Correlation between water content and water dew point |
| EN ISO 15403-1:2008 | Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality (ISO 15403-1:2006) |
| ISO 6974-5:2014 | Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+ hydrocarbons |
| EN ISO 10101-3:1998 | Natural gas - Determination of water by the Karl Fischer method - Part 3: Coulometric procedure (ISO 10101-3:1993) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.