I.S. EN 16785-1:2015
Current
The latest, up-to-date edition.
BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS
Hardcopy , PDF
English
01-01-2015
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Principle
6 Rules for allocation of elements
7 Group I products
8 Group II products
Annex A (informative) - Standardized sampling methods
Annex B (informative) - Example of format for reporting
results for Group I products
Annex C (normative) - Calculation of the bio-based carbon
content and bio-based content for Group II products
Annex D (informative) - Example of format for reporting
results for Group II products
Bibliography
Defines a method of determining the bio-based content in products, based on the radiocarbon analysis and elemental analysis.
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 16785-1:2015 | Identical |
| ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
| ISO 10715:1997 | Natural gas — Sampling guidelines |
| ISO 8943:2007 | Refrigerated light hydrocarbon fluids Sampling of liquefied natural gas Continuous and intermittent methods |
| ISO 3170:2004 | Petroleum liquids — Manual sampling |
| EN ISO 4257:2001 | Liquefied petroleum gases - Method of sampling (ISO 4257:2001) |
| ISO 10210:2012 | Plastics — Methods for the preparation of samples for biodegradation testing of plastic materials |
| ASTM C 224 : 1978 | PRACTICE FOR SAMPLING GLASS CONTAINERS |
| ISO 13833:2013 | Stationary source emissions Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide Radiocarbon sampling and determination |
| EN ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2013) |
| EN 13137:2001 | Characterization of waste - Determination of total organic carbon (TOC) in waste, sludges and sediments |
| EN 15442:2011 | Solid recovered fuels - Methods for sampling |
| EN 14778:2011 | Solid biofuels - Sampling |
| ISO 8245:1999 | Water quality Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC) |
| EN 14780:2011 | Solid biofuels - Sample preparation |
| EN 15443:2011 | Solid recovered fuels - Methods for the preparation of the laboratory sample |
| EN ISO 13833:2013 | Stationary source emissions - Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide - Radiocarbon sampling and determination (ISO 13833:2013) |
| EN 16449:2014 | Wood and wood-based products - Calculation of the biogenic carbon content of wood and conversion to carbon dioxide |
| ASTM C 322 : 2009 | Standard Practice for Sampling Ceramic Whiteware Clays |
| ISO 1795:2017 | Rubber, raw natural and raw synthetic — Sampling and further preparative procedures |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| ISO 4257:2001 | Liquefied petroleum gases Method of sampling |
| ASTM D 6085 : 1997 | Standard Practice for Sampling in Rubber Testing--Terminology and Basic Concepts |
| ISO 186:2002 | Paper and board — Sampling to determine average quality |
| ASTM C 172/C172M : 2017 : REDLINE | Standard Practice for Sampling Freshly Mixed Concrete |
| CEN/TS 16640:2014 | Bio-based products - Determination of the bio based carbon content of products using the radiocarbon method |
| ASTM D 3437 : 2015 : REDLINE | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 7026 : 2013 | Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis (Withdrawn 2020) |
| ISO 15350:2000 | Steel and iron — Determination of total carbon and sulfur content — Infrared absorption method after combustion in an induction furnace (routine method) |
| EN ISO 186:2002 | Paper and board - Sampling to determine average quality (ISO 186:2002) |
| ISO 10694:1995 | Soil quality — Determination of organic and total carbon after dry combustion (elementary analysis) |
| EN 16575:2014 | Bio-based products - Vocabulary |
| ISO 20904:2006 | Hard coal Sampling of slurries |
| EN ISO 10715:2000 | Natural gas - Sampling guidelines (ISO 10715:1997) |
| ASTM D 5291 : 2016 : REDLINE | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants |
| ISO 18283:2006 | Hard coal and coke Manual sampling |
| ISO 17247:2013 | Coal Ultimate analysis |
| EN ISO 3170:2004 | Petroleum liquids - Manual sampling (ISO 3170:2004) |
| ASTM D 7718 : 2011 | Standard Practice for Obtaining In-Service Samples of Lubricating Grease |
| ASTM D 2915 : 2017 : REDLINE | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
| ISO 7213:1981 | Pulps Sampling for testing |
| EN ISO 3171:1999 | Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.