I.S. EN 1915-4:2005
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS AND REDUCTION
Hardcopy , PDF
04-06-2009
English
11-02-2005
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Noise reduction
5 Test conditions
6 Emission sound pressure level - Operation during
standstill test
7 Emission sound pressure level - Driving test
8 Sound power determination
9 Information to be reported
10 Declaration of noise emission
11 Verification
12 Instructions and technical documentation
Annex A (informative) Overview of typical requirements
for measurement of sound pressure levels
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC, amended by Directive 98/79/EC
Annex ZB (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
Specifies noise reduction as a safety requirement. It also specifies the methods for determining the sound pressure level at workstations, other specified positions and the sound power level of GSE during intended use.
| DevelopmentNote |
2005 Edition Re-issued in June 2009 & incorporates AMD 1 2009. (06/2009)
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| NF EN 1915-4 : 2005 + A1 2010 | Identical |
| BS EN 1915-4 : 2004 | Identical |
| DIN EN 1915-4:2009-06 | Identical |
| EN 1915-4:2004+A1:2009 | Identical |
| NBN EN 1915-4 : 2005 + A1 2009 | Identical |
| SN EN 1915-4 : 2005 + A1 2009 | Identical |
| UNI EN 1915-4 : 2012 | Identical |
| NEN EN 1915-4 : 2004 + A1 2009 | Identical |
| NS EN 1915-4 : 2004 + A1 2009 | Identical |
| EN 1915-3:2004+A1:2009 | Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| EN 12312-12:2017 | Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipment |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| EN 12312-4:2014 | Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| ISO 9614-1:1993 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points |
| EN 414 : 2000 | SAFETY OF MACHINERY - RULES FOR THE DRAFTING AND PRESENTATION OF SAFETY STANDARDS |
| EN 12312-13:2017 | Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment |
| ISO 9614-2:1996 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning |
| EN ISO 11688-2:2000 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998) |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| SAE ARP 1801 : 2012 | MEASUREMENT OF EXTERIOR SOUND LEVEL OF SPECIALIZED AIRCRAFT GROUND SUPPORT EQUIPMENT |
| PREN 12312-14 : DRAFT 2011 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 14: DISABLED/INCAPACITATED PASSENGER BOARDING VEHICLES |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| EN 12312-3:2017 | Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles |
| EN 12312-2:2014 | Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles |
| EN 12312-1:2013 | Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| PREN 12312-16 : DRAFT 99 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 16: AIR START EQUIPMENT |
| EN ISO 9614-2:1996 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996) |
| PREN 12312-15 : DRAFT 2017 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 15: BAGGAGE AND EQUIPMENT TRACTORS |
| PREN 12312-9 : DRAFT 2010 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 9: CONTAINER/PALLET LOADERS |
| EN 12312-17:2004+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN 1915-1:2013 | Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| EN 12312-6:2017 | Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment |
| PREN 12312-18 : DRAFT 1999 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 18: OXYGEN/NITROGEN UNITS |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| ISO/TR 11688-2:1998 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
| EN ISO 9614-1:2009 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| PREN 12312-19 : DRAFT 1999 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 19: AIRCRAFT JACKS AND HYDRAULIC TAIL STANCHIONS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.