I.S. EN 1918-3:2016
Current
The latest, up-to-date edition.
GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 3: FUNCTIONAL RECOMMENDATIONS FOR STORAGE IN SOLUTIONMINED SALT CAVERNS
Hardcopy , PDF
English
01-01-2016
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
National Foreword
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements for underground gas storage
5 Design
6 Construction
7 Testing and commissioning
8 Operation, monitoring and maintenance
9 Abandonment
Annex A (informative) - Non-exhaustive list of
relevant standards
Annex B (informative) - Significant technical changes
between this European Standard and the
previous version EN 1918-3:2008
Gives the functional recommendations for design, construction, testing, commissioning, operation, maintenance and abandonment of underground gas storage (UGS) facilities in solution-mined salt caverns up to and including the wellhead.
| DocumentType |
Standard
|
| Pages |
44
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS EN 1918-3:1998 | Identical |
| EN 1918-3:2016 | Identical |
| NF EN 1918-3 : 1998 | Identical |
| NBN EN 1918-3 : 2016 | Identical |
| NEN EN 1918-3 : 2016 | Identical |
| NS EN 1918-3 : 1998 | Identical |
| DIN EN 1918-3:2014-06 (Draft) | Identical |
| DIN EN 1918-3:2016-11 | Equivalent |
| BS EN 1918-3:2016 | Equivalent |
| UNE-EN 1918-3:2016 | Identical |
| DIN EN 1918-3:1998-07 | Identical |
| EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| ISO 5596:1999 | Hydraulic fluid power — Gas-loaded accumulators with separator — Ranges of pressures and volumes and characteristic quantities |
| EN ISO 11960:2014 | Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014) |
| EN ISO 10423:2009 | Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2009) |
| EN ISO 16070:2005 | Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005) |
| EN 14505:2005 | Cathodic protection of complex structures |
| ISO 10416:2008 | Petroleum and natural gas industries — Drilling fluids — Laboratory testing |
| EN 12954:2001 | Cathodic protection of buried or immersed metallic structures - General principles and application for pipelines |
| EN ISO 10432:2004 | Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004) |
| ISO 17824:2009 | Petroleum and natural gas industries — Downhole equipment — Sand screens |
| EN ISO 10417:2004 | Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress (ISO 10417:2004) |
| EN ISO 10424-2:2007 | Petroleum and natural gas industries - Rotary drilling equipment - Part 2: Threading and gauging of rotary shouldered thread connections (ISO 10424-2:2007) |
| ISO 13535:2000 | Petroleum and natural gas industries — Drilling and production equipment — Hoisting equipment |
| ISO 10870:2012 | Water quality — Guidelines for the selection of sampling methods and devices for benthic macroinvertebrates in fresh waters |
| EN ISO 14310:2008 | Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2008) |
| ISO 28781:2010 | Petroleum and natural gas industries — Drilling and production equipment —Subsurface barrier valves and related equipment |
| EN ISO 13534:2000 | Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and remanufacture of hoisting equipment (ISO 13534:2000) |
| EN ISO 10427-2:2004 | Petroleum and natural gas industries - Equipment for well cementing - Part 2: Centralizer placement and stop-collar testing (ISO 10427-2:2004) |
| CEN/TR 13737-1:2012 | Implementation Guide for functional standards prepared by CEN/TC 234 Gas infrastructure - Part 1: General |
| EN 13509:2003 | Cathodic protection measurement techniques |
| CEN/TR 13737-2:2014 | Gas infrastructure - Implementation Guide for Functional Standards prepared by CEN/TC 234 - Part 2: National Pages related to CEN/TC 234 standards |
| ISO/TR 10400:2007 | Petroleum and natural gas industries — Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing |
| ISO 10946:1999 | Hydraulic fluid power — Gas-loaded accumulators with separator — Selection of preferred hydraulic ports |
| EN ISO 10870:2012 | Water quality - Guidelines for the selection of sampling methods and devices for benthic macroinvertebrates in fresh waters (ISO 10870:2012) |
| ISO 13501:2011 | Petroleum and natural gas industries — Drilling fluids — Processing equipment evaluation |
| EN 1918-5:2016 | Gas infrastructure - Underground gas storage - Part 5: Functional recommendations for surface facilities |
| EN ISO 10424-1:2004 | Petroleum and natural gas industries - Rotary drilling equipment - Part 1: Rotary drill stem elements (ISO 10424-1:2004) |
| ISO 10945:1994 | Hydraulic fluid power — Gas-loaded accumulators — Dimensions of gas ports |
| EN 15112:2006 | External cathodic protection of well casings |
| EN ISO 10405:2006 | Petroleum and natural gas industries - Care and use of casing and tubing (ISO 10405:2006) |
| EN ISO 10427-1:2001 | Petroleum and natural gas industries - Casing centralizers - Part 1: Bow-spring casing centralizers (ISO 10427-1:2001) |
| ISO 10414-1:2008 | Petroleum and natural gas industries — Field testing of drilling fluids — Part 1: Water-based fluids |
| EN ISO 10427-3:2004 | Petroleum and natural gas industries - Equipment for well cementing - Part 3: Performance testing of cementing float equipment (ISO 10427-3:2003) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.