I.S. EN 378-3:2016
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 3: INSTALLATION SITE AND PERSONAL PROTECTION
Hardcopy , PDF
30-04-2021
English
01-01-2016
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
4 Location of refrigerating equipment
5 Machinery rooms
6 Requirements for alternative provisions
7 Electrical installations
8 Safety alarms
9 Detectors
10 Instruction manuals, notices and inspections
11 Heat sources and temporary high temperatures
at the site
Anhang A (informative) - Personal protective
equipment
Bibliography
Defines the requirements for the safety of persons and property, provides guidance for the protection of the environment and establishes procedures for the operation, maintenance and repair of refrigerating systems and the recovery of refrigerants.
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| UNE-EN 378-3:2008 | Identical |
| NF EN 378-3 : 2017 | Identical |
| BS EN 378-3:2016 | Identical |
| NBN EN 378-3 : 2008 + A1 2012 | Identical |
| EN 378-3:2016 | Identical |
| UNI EN 378-3 : 2012 | Identical |
| DIN EN 378-3:2014-02 (Draft) | Identical |
| SN EN 378-3 : 2017 | Identical |
| NEN EN 378-3 : 2016 | Identical |
| NS EN 378-3 : 2016 | Identical |
| ONORM EN 378-3 : 2017 | Identical |
| DIN EN 378-3:2012-08 | Identical |
| UNE-EN 378-3:2017 | Identical |
| EN 14387:2004+A1:2008 | Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking |
| EN 1507:2006 | Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage |
| EN 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
| EN 378-4:2016 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| EN 378-1:2016 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| EN 132:1998 | Respiratory protective devices - Definitions of terms and pictograms |
| IEC 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
| EN 134:1998 | Respiratory protective devices - Nomenclature of components |
| EN 1366-1:2014 | Fire resistance tests for service installations - Part 1: Ventilation ducts |
| EN 133:2001 | Respiratory protective devices - Classification |
| IEC TR 61200-52:2013 | Electrical installation guide - Part 52: Selection and erection of electrical equipment - Wiring systems |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 12236:2002 | Ventilation for buildings - Ductwork hangers and supports - Requirements for strength |
| IEC 60079-29-2:2015 RLV | Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
| EN ISO 14122-2:2016 | Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016) |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| ISO 13043:2011 | Road vehicles Refrigerant systems used in mobile air conditioning systems (MAC) Safety requirements |
| EN 137:2006 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with full face mask - Requirements, testing, marking |
| EN 135:1998 | Respiratory protective devices - List of equivalent terms |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| EN 1366-2:2015 | Fire resistance tests for service installations - Part 2: Fire dampers |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| ISO 14122-2:2016 | Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways |
| ISO 817:2014 | Refrigerants — Designation and safety classification |
| EN 60079-29-2:2015 | Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
| EN 378-2:2016 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
| EN 14593-2:2005 | Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 2: Apparatus with a half mask at positive pressure - Requirements, testing, marking |
| EN 14624:2012 | Performance of portable leak detectors and of room monitors for halogenated refrigerants |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.