I.S. EN 45510-4-5:2002
Current
The latest, up-to-date edition.
GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-5: BOILER AUXILIARIES - COAL HANDLING AND BULK STORAGE PLANT
Hardcopy , PDF
English
01-01-2002
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
3.1 Organisational terms
3.2 Technical terms
3.3 General terms
4 Brief overall project description
4.1 Role and organisation of purchaser
4.2 Site location
4.3 Equipment task
4.4 Equipment to be purchased
4.5 Control and instrumentation
4.6 Electrical supplies and other services
4.7 Other interfaces
4.8 Project programme
4.9 Equipment identification systems
5 Extent of supply
6 Terminal points
7 Operational requirements
7.1 Operating environment
7.2 Manning levels
7.3 Normal operation
7.4 Operating hours
7.5 Start-up and shut-down
7.6 Abnormal conditions
7.7 Further operational requirements
8 Life expectancy
8.1 Design life
8.2 Components requiring periodic maintenance
9 Performance requirements
9.1 Duty
9.2 Performance
9.3 Equipment margins
9.4 Availability
9.5 Levels of component redundancy
9.6 Further performance requirements
10 Design and fabrication
10.1 Specific equipment features
10.2 Design justification
10.3 Material selection
10.4 Safety
10.5 Interchangeability
10.6 Fabrication methods
11 Maintenance requirements
11.1 Planned maintenance
11.2 Personnel safety
11.3 Requirement for access
11.4 Lifting requirements
11.5 Special tools
11.6 Test equipment
11.7 Spare parts strategy
11.8 Special precautions
12 Technical documentation requirements
12.1 Tender documentation
12.2 Contract documentation
13 Applicable legislation, regulations, standards and further
requirements
13.1 Legislation and regulations
13.2 Standards
13.3 Further requirements
14 Evaluation criteria
14.1 General
14.2 Technical criteria
15 Quality measures
15.1 General
15.2 Approvals procedure
15.3 Inspection requirements
15.4 Non-conformity
16 Site factors
16.1 Access
16.2 Facilities
16.3 Site specific requirements
17 Verification of specified performance
17.1 General
17.2 Work tests
17.3 Test during installation and commissioning
17.4 Technical conditions for trial run
17.5 Functional and performance tests
Bibliography
Gives guidance on writing the technical specification for the procurement of coal handling and bulk storage plant for use in electricity generating stations (power stations).
DocumentType |
Standard
|
Pages |
44
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Standards | Relationship |
SN EN 45510-4-5 : 2002 | Identical |
NEN EN 45510-4-5 : 2002 | Identical |
NS EN 45510-4-5 : 1ED 2002 | Identical |
BS EN 45510-4-5:2002 | Identical |
EN 45510-4-5:2002 | Identical |
UNE-EN 45510-4-5:2004 | Identical |
NF EN 45510-4-5 : 2002 | Identical |
DIN EN 45510-4-5:2002-11 | Identical |
ISO 7190:1981 | Continuous mechanical handling equipment — Bucket elevators — Classification |
ISO 5048:1989 | Continuous mechanical handling equipment — Belt conveyors with carrying idlers — Calculation of operating power and tensile forces |
ISO 3265:1974 | Continuous mechanical handling equipment for loose bulk materials — Wagon tipplers handling rail-borne wagons (rotary, side discharge and end discharge) — Safety code |
ISO 3435:1977 | Continuous mechanical handling equipment — Classification and symbolization of bulk materials |
EN 617:2001+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers |
ISO 10326-1:2016 | Mechanical vibration Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements |
ISO 4649:2017 | Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device |
ISO 3740:2000 | Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards |
ISO 7149:1982 | Continuous handling equipment — Safety code — Special rules |
EN 45510-8-1:1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 8-1: CONTROL AND INSTRUMENTATION |
ISO 5293:2004 | Conveyor belts — Determination of minimum transition distance on three idler rollers |
ISO 8456:1985 | Storage equipment for loose bulk materials — Safety code |
ISO 361:1975 | Basic ionizing radiation symbol |
ISO 1535:1975 | Continuous mechanical handling equipment for loose bulk materials — Troughed belt conveyors (other than portable conveyors) — Belts |
ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
ISO 3684:1990 | Conveyor belts — Determination of minimum pulley diameters |
ISO/TR 8435:1984 | Continuous mechanical handling equipment Safety code for belt conveyors Examples for protection of pinch points on idlers |
ISO 1996-1:2016 | Acoustics Description, measurement and assessment of environmental noise Part 1: Basic quantities and assessment procedures |
ISO 1536:1975 | Continuous mechanical handling equipment for loose bulk materials — Troughed belt conveyors (other than portable conveyors) — Belt pulleys |
ISO 2631-1:1997 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements |
ISO 5049-1:1994 | Mobile equipment for continuous handling of bulk materials — Part 1: Rules for the design of steel structures |
ISO 4123:1979 | Belt conveyors — Impact rings for carrying idlers and discs for return idlers — Main dimensions |
ISO 1816:1975 | Continuous mechanical handling equipment for loose bulk materials and unit loads — Belt conveyors — Basic characteristics of motorized driving pulleys |
ISO 2406:1974 | Continuous mechanical handling equipment — Mobile and portable conveyors — Constructional specifications |
ISO/TR 5045:1979 | Continuous mechanical handling equipment Safety code for belt conveyors Examples for guarding of nip points |
ISO 3870:1976 | Conveyor belts (fabric carcass), with length between pulley centres up to 300 m, for loose bulk materials — Adjustment of take-up device |
ISO 2109:1975 | Continuous mechanical handling equipment — Light duty belt conveyors for loose bulk materials |
ISO 1819:1977 | Continuous mechanical handling equipment — Safety code — General rules |
ISO 2148:1974 | Continuous handling equipment — Nomenclature |
EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
ISO 1537:1975 | Continuous mechanical handling equipment for loose bulk materials — Troughed belt conveyors (other than portable conveyors) — Idlers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.