I.S. EN 50341-2-22:2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 2-22: NATIONAL NORMATIVE ASPECTS (NNA) FOR POLAND (BASED ON EN 50341-1:2012)
Hardcopy , PDF
15-04-2022
English
01-01-2016
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National Foreword
European foreword
1 Scope
2 Normative references, definitions and symbols
3 Basis of design
4 Action on lines
5 Electrical requirements
6 Earthing systems
7 Supports
8 Foundations
9 Conductors and earth-wires
10 Insulators
11 Hardware
12 Quality assurance, checks and taking-over
Annex G (normative) - Calculation methods for
earthing systems
Annex H (informative) - Installation and measurements
of earthing systems
Annex J (normative) - Angles in lattice steel towers
Annex K (normative) - Steel poles
Annex M (informative) - Geotechnical and structural
design of foundations
Provides the requirements which shall be fulfilled while designing and constructing of new overhead lines with nominal system voltages exceeding 1 kV AC.
| DocumentType |
Standard
|
| Pages |
76
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| EN 50341-2-22:2016 | Identical |
| PN EN 10020 : 2003 | DEFINITION AND CLASSIFICATION OF GRADES OF STEEL |
| PN EN ISO 14688-2 : 2006 AMD 1 2014 | GEOTECHNICAL INVESTIGATION AND TESTING - IDENTIFICATION AND CLASSIFICATION OF SOIL - PART 2: PRINCIPLES FOR A CLASSIFICATION (ISO 14688-2:2004/AMD 1:2013) |
| PN EN 14229 : 2010 | STRUCTURAL TIMBER - WOOD POLES FOR OVERHEAD LINES |
| PN EN 1991-1-4 : 2008 AMD 1 2010 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS |
| PN EN ISO 1461 : 2011 | HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
| PN EN 1993-1-8 : 2006 NA 2011 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS |
| PN EN 1997-2 : 2009 AC 2010 | EUROCODE 7 - GEOTECHNICAL DESIGN - PART 2: GROUND INVESTIGATION AND TESTING |
| PN E-06303 : 1998 | EXPOSURE OF OUTDOOR INSULATION TO POLLUTION AND SELECTION OF INSULATORS UNDER POLLUTED CONDITIONS |
| PN EN 61284 : 2002 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| PN EN 1991-1-6 : 2007 AC 2013 | EUROCODE 1 - ACTIONS ON STRUCTURES PART 1-6: GENERAL ACTIONS - ACTIONS DURING EXECUTION |
| PN EN 1995-1-1 : 2010 AMD 2 2014 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
| PN EN 1993-1-5 : 2008 AMD 1 2017 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-5: PLATED STRUCTURAL ELEMENTS |
| PN EN 10025-2 : 2007 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| PN EN 1090-1 : 2010 + A1 2012 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS |
| PN EN ISO 14713 : 2000 | PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - ZINC AND ALUMINIUM COATINGS - GUIDELINES |
| PN 80/B-03322 : 1980 | ELECTRIC OVERHEAD LINES - FOUNDATIONS OF SUPPORTING STRUCTURES - STATIC CALCULATIONS AND DESIGN |
| PN 78/B-02483 : 1978 | LARGE DIAMETER BORED PILES - SPECIFICATIONS AND TESTS |
| PN EN 12843 : 2008 | PRECAST CONCRETE PRODUCTS - MASTS AND POLES |
| PN EN 1993-1-11 : 2008 NA 2010 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-11: DESIGN OF STRUCTURES WITH TENSION COMPONENTS |
| PN EN 1990 : 2004 NA 2010 | EUROCODE - BASIS OF STRUCTURAL DESIGN |
| PN EN ISO 14688-1 : 2006 AMD 1 2014 | GEOTECHNICAL INVESTIGATION AND TESTING - IDENTIFICATION AND CLASSIFICATION OF SOIL - PART 1: IDENTIFICATION AND DESCRIPTION (ISO 14688-1:2002/AMD 1:2013) |
| PN EN 1993-1-1 : 2006 AMD 1 2014 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| PN EN 1090-2 : 2009 + A1 2012 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| PN EN 1992-1-1 : 2008 AMD 1 2015 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| PN EN 1997-1 : 2008 AMD 1 2014 | EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES |
| PN EN 10025-1 : 2007 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| PN 83/B-02482 : 1983 | BUILDING FOUNDATIONS - CAPACITY OF PILES AND PILE FOUNDATIONS |
| PN EN 61395 : 2002 | OVERHEAD ELECTRICAL CONDUCTORS - CREEP TEST PROCEDURES FOR STRANDED CONDUCTORS |
| PN EN 1993-1-3 : 2008 NA 2010 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING |
| PN EN 1993-3-1 : 2008 NA 2010 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 3-1: TOWERS, MASTS AND CHIMNEYS - TOWERS AND MASTS |
| PN E-05115 : 2002 | POWER INSTALLATIONS EXCEEDING 1 KV A.C. |
| PN EN 60305 : 2007 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1 KV - CERAMIC OR GLASS INSULATOR UNITS FOR A.C. SYSTEMS - CHARACTERISTICS OF INSULATOR UNITS OF THE CAP AND PIN TYPE |
| PN EN 60652 : 2006 | LOADING TESTS ON OVERHEAD LINE STRUCTURES |
| PN EN 1998-6 : 2005 | EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 6: TOWERS, MASTS AND CHIMNEYS |
| PN EN 1993-1-6 : 2009 AMD 1 2017 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES |
| PN EN 61109 : 2010 | INSULATORS FOR OVERHEAD LINES - COMPOSITE SUSPENSION AND TENSION INSULATORS FOR A.C. SYSTEMS WITH A NOMINAL VOLTAGE GREATER THAN 1000 V - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.