I.S. EN 55035:2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ELECTROMAGNETIC COMPATIBILITY OF MULTIMEDIA EQUIPMENT - IMMUNITY REQUIREMENTS
Hardcopy , PDF
28-11-2019
English
01-01-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National Foreword
European foreword
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Requirements
5 Immunity requirements
6 Documentation
7 Test configuration
8 General performance criteria
9 Compliance with this document
10 Test uncertainty
Annex A (normative) - Broadcast reception function
Annex B (normative) - Print function
Annex C (normative) - Scan function
Annex D (normative) - Display and display output
Functions
Annex E (normative) - Musical tone generating function
Annex F (normative) - Networking functions
Annex G (normative) - Audio output function
Annex H (normative) - Telephony function
Annex I (informative) - Immunity to specific radio technologies
operating at frequencies of 800 MHz and above
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Annex ZZA (informative) - Relationship between this
European Standard and the essential
requirements of Directive 2014/30/EU [2014 OJ L96]
aimed to be covered
Annex ZZB (informative) - Relationship between this
European Standard and the essential
requirements of Directive 2014/53/EU [2014 OJ L153]
aimed to be covered
Pertains to multimedia equipment (MME) as defined in 3.1.24 and having a rated AC or DC supply voltage not exceeding 600 V.
| DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (09/2017)
|
| DocumentType |
Standard
|
| Pages |
186
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| EN 55035:2017 | Identical |
| EN 300 386 : 1.6.1 | TELECOMMUNICATION NETWORK EQUIPMENT; ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF THE DIRECTIVE 2014/30/EU |
| CISPR 20:2006+AMD1:2013 CSV | Sound and television broadcast receivers and associated equipment -Immunity characteristics - Limits and methods of measurement |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| CISPR TR 29:2004 | Television broadcast receivers and associated equipment - Immunity characteristics - Methods of objective picture assessment |
| EN 29241-3:1993/A1:2000 | ERGONOMIC REQUIREMENTS FOR OFFICE WORK WITH VISUAL DISPLAY TERMINALS (VDTS) - PART 3: VISUAL DISPLAY REQUIREMENTS |
| EN 303 340 : 1.1.2 | DIGITAL TERRESTRIAL TV BROADCAST RECEIVERS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF DIRECTIVE 2014/53/EU |
| EN 300 744 : 1.6.2 | DIGITAL VIDEO BROADCASTING (DVB); FRAMING STRUCTURE, CHANNEL CODING AND MODULATION FOR DIGITAL TERRESTRIAL TELEVISION |
| EN 61000-4-21:2011 | Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test methods |
| EN 300 421 : 1.1.2 | DIGITAL VIDEO BROADCASTING (DVB): FRAMING STRUCTURE, CHANNEL CODING AND MODULATION FOR 11/12 GHZ SATELLITE SERVICES |
| EN 61000-4-11:2004/A1:2017 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS (IEC 61000-4-11:2004/A1:2017) |
| ES 201 488 : 1.1.1 | DATA-OVER-CABLE SERVICE INTERFACE SPECIFICATIONS RADIO FREQUENCY INTERFACE SPECIFICATION |
| IEC 60942:2003 | Electroacoustics - Sound calibrators |
| IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
| IEEE 802.3-2012 | IEEE Standard for Ethernet |
| CISPR 16-2-1:2014 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements |
| IEC 61000-4-8:2009 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| EN 300 429 : 1.2.1 | DIGITAL VIDEO BROADCASTING (DVB): FRAMING STRUCTURE, CHANNEL CODING AND MODULATION FOR CABLE SYSTEMS |
| EN 61000-4-2:2009 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| CISPR 32:2015 RLV | Electromagnetic compatibility of multimedia equipment - Emission requirements |
| IEC TR 61000-2-5:2017 | Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments |
| TR 101 154 : 1.4.1 | DIGITAL VIDEO BROADCASTING (DVB); IMPLEMENTATION GUIDELINES FOR THE USE OF MPEG-2 SYSTEMS, VIDEO AND AUDIO IN SATELLITE, CABLE AND TERRESTRIAL BROADCASTING APPLICATIONS |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| EN 61000-4-3 : 2006 AMD 2 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
| ES 202 488-1 : 1.1.1 | ACCESS AND TERMINALS (AT); SECOND GENERATION TRANSMISSION SYSTEMS FOR INTERACTIVE CABLE TELEVISION SERVICES - IP CABLE MODEMS; PART 1: GENERAL |
| EN 61000-4-8:2010 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
| IEC 61000-4-20:2010 | Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| SCTE 07 : 2013 | DIGITAL TRANSMISSION STANDARD FOR CABLE TELEVISION |
| EN 61000-4-4:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012) |
| EN 61000-4-6:2014/AC:2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013) |
| CISPR 24:2010+AMD1:2015 CSV | Information technology equipment - Immunity characteristics - Limitsand methods of measurement |
| IEC 61000-4-21:2011 | Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test methods |
| EN 61000-4-20:2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.