I.S. EN 60335-2-77:2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS
Hardcopy , PDF
08-09-2021
English
01-01-2010
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Introduction
1 Scope
2 Normative references
3 Definitions
4 General requirement
5 General conditions for the tests
6 Classification
7 Marking and instructions
8 Protection against access to live parts
9 Starting of motor-operated appliances
10 Power input and current
11 Heating
13 Leakage current and electric strength at operating
temperature
14 Transient overvoltages
15 Moisture resistance
16 Leakage current and electric strength
17 Overload protection of transformers and associated
circuits
18 Endurance
19 Abnormal operation
20 Stability and mechanical hazards
21 Mechanical strength
22 Construction
23 Internal wiring
24 Components
25 Supply connection and external flexible cords
26 Terminals for external conductors
27 Provision for earthing
28 Screws and connections
29 Clearances, creepage distances and solid
insulation
30 Resistance to heat and fire
31 Resistance to rusting
32 Radiation, toxicity and similar hazards
Annexes
Annex B (normative) Appliances powered by rechargeable
batteries
Annex AA (normative) Safety signs and symbols
Annex BB (normative) Test enclosure target panels - Corrugated
fibreboard penetration test
Annex CC (normative) Target panel elevation areas and suggested
data sheet for thrown object
Annex DD (normative) Test enclosure
Annex EE (informative) Safety instructions for lawnmowers
Annex FF (normative) Vibration
Annex GG (normative) Noise test code - Engineering method
(grade 2)
Annex HH (informative) Example of a material and construction
fulfilling the requirements for an artificial surface
Annex ZZ (informative) Coverage of Essential Requirements of EC
Directives
Bibliography
Defines safety requirements and their verification for the design and construction of pedestrian controlled walk-behind electrically powered lawnmowers.
| DevelopmentNote |
Supersedes I.S. 205-3-1. (02/2004) Supersedes I.S. EN 50338. (10/2010) For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
195
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| EN 60335-2-77:2010 | Identical |
| NF EN 60335-2-77 : 2011 | Identical |
| DIN EN 60335-2-77 : 2011 | Identical |
| BS EN 60335-2.77 : 2010 | Identical |
| IEC 60335-2-77:2002 | Identical |
| UNE-EN 60335-2-77:2011 | Identical |
| SN EN 60335-2-77 : 2006 | Identical |
| ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
| ISO 20643:2005 | Mechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation of vibration emission |
| EN ISO 3767-1 : 2000 | TRACTORS, MACHINERY FOR AGRICULTURE AND FORESTRY, POWERED LAWN AND GARDEN EQUIPMENT - SYMBOLS FOR OPERATOR CONTROLS AND OTHER DISPLAYS - PART 1: COMMON SYMBOLS |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| ISO 3767-3:2016 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part 3: Symbols for powered lawn and garden equipment |
| ISO 3767-2:2016 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part 2: Symbols for agricultural tractors and machinery |
| ISO 500:1991 | Agricultural tractors Rear-mounted power take-off Types 1, 2 and 3 |
| IEC 60320-2-3:1998+AMD1:2004 CSV | Appliance couplers for household and similar general purposes - Part 2-3: Appliance couplers with a degree of protection higher than IPX0 |
| ISO 2758:2014 | Paper Determination of bursting strength |
| EN 60335-2-29:2004/A2:2010 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-29: PARTICULAR REQUIREMENTS FOR BATTERY CHARGERS |
| EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
| ISO 3305:1985 | Plain end welded precision steel tubes — Technical conditions for delivery |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| EN ISO 3767-3 : 1996 | TRACTORS, MACHINERY FOR AGRICULTURE AND FORESTRY, POWERED LAWN AND GARDEN EQUIPMENT - SYMBOLS FOR OPERATOR CONTROLS AND OTHER DISPLAYS - PART 3: SYMBOLS FOR POWERED LAWN AND GARDEN EQUIPMENT |
| EN ISO 3767-5 : 1995 | TRACTORS, MACHINERY FOR AGRICULTURE AND FORESTRY, POWERED LAWN AND GARDEN EQUIPMENT - SYMBOLS FOR OPERATOR CONTROLS AND OTHER DISPLAYS - PART 5: SYMBOLS FOR MANUAL PORTABLE FORESTRY MACHINERY |
| EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
| ISO 3767-1:2016 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part 1: Common symbols |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| ISO 4200:1991 | Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| ISO 4046:1978 | Paper, board, pulp and related terms — Vocabulary |
| ISO 3304:1985 | Plain end seamless precision steel tubes — Technical conditions for delivery |
| IEC 60335-2-29:2016 | Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| ISO 3864:1984 | Safety colours and safety signs |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| EN ISO 3767-2:1995/A2:2000 | TRACTORS, MACHINERY FOR AGRICULTURE AND FORESTRY, POWERED LAWN AND GARDEN EQUIPMENT - SYMBOLS FOR OPERATOR CONTROLS AND OTHER DISPLAYS - PART 2: SYMBOLS FOR AGRICULTURAL TRACTORS AND MACHINERY |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| ISO 3306:1985 | Plain end as-welded and sized precision steel tubes — Technical conditions for delivery |
| ISO 11684:1995 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Safety signs and hazard pictorials — General principles |
| EN 60320-2-3:1998/A1:2005 | APPLIANCE COUPLER FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 2-3: APPLIANCE COUPLER WITH A DEGREE OF PROTECTION HIGHER THAN IPX0 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.