I.S. EN 60335-2-79:2012
Current
The latest, up-to-date edition.
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-79: PARTICULAR REQUIREMENTS FOR HIGH PRESSURE CLEANERS AND STEAM CLEANERS (IEC 60335-2-79:2012 (MOD))
Hardcopy , PDF
English
01-01-2012
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General requirement
5 General conditions for the tests
6 Classification
7 Marking and instructions
8 Protection against access to live parts
9 Starting of motor-operated appliances
10 Power input and current
11 Heating
12 Void
13 Leakage current and electric strength at operating
temperature
14 Transient overvoltages
15 Moisture resistance
16 Leakage current and electric strength
17 Overload protection of transformers and associated
circuits
18 Endurance
19 Abnormal operation
20 Stability and mechanical hazards
21 Mechanical strength
22 Construction
23 Internal wiring
24 Components
25 Supply connection and external flexible cords
26 Terminals for external conductors
27 Provision for earthing
28 Screws and connections
29 Clearances, creepage distances and solid insulation
30 Resistance to heat and fire
31 Resistance to rusting
32 Radiation, toxicity and similar hazards
Annexes
Annex AA (normative) - Requirements to avoid backsiphonage
Annex BB (normative) - Analysis method for determining the
necessary safety device to prevent backsiphonage
Annex CC (normative) - Emission of acoustical noise
Annex DD (normative) - Emission of vibration
Annex EE (informative) - Model test report for vibration
emission at handles of high-pressure cleaners
Bibliography
Annex ZC (normative) - Normative references to international
publications with their corresponding European
publications
Annex ZE (informative) - Specific additional requirements for
appliances and machines intended for commercial use
Annex ZZ (informative) - Coverage of Essential Requirements
of Directive 2006/42/EC
Describes the safety of high-pressure cleaners without traction drive, intended for household and commercial indoor or outdoor use, having a rated pressure not less than 2.5 MPa and not exceeding 35 MPa.
| DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
74
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| NF EN 60335-2-79 : 2005 AMD 1 2007 | Identical |
| DIN EN 60335-2-79 : 2015 | Identical |
| SN EN 60335-2-79 : 2004 AMD 1 2006 | Identical |
| UNE-EN 60335-2-79:2013 | Identical |
| BS EN 60335-2-79:2012 | Identical |
| EN 60335-2-79:2012 | Identical |
| EN 12096:1997 | Mechanical vibration - Declaration and verification of vibration emission values |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| IEC 61558-2-3:2010 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners |
| ISO 20643:2005 | Mechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation of vibration emission |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| IEC 60364-1:2005 | Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions |
| HD 60364-1:2008/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: FUNDAMENTAL PRINCIPLES, ASSESSMENT OF GENERAL CHARACTERISTICS, DEFINITIONS |
| EN 907 : 1997 | AGRICULTURAL AND FORESTRY MACHINERY - SPRAYERS AND LIQUID FERTILIZER DISTRIBUTORS - SAFETY |
| EN 61558-2-3:2010 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners |
| EN 1829-1:2010 | High pressure water jet machines - Safety requirements - Part 1: Machines |
| ISO 11203:1995 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
| ISO 3864-1:2011 | Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings |
| ISO 5349-1:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements |
| IEC 61770:2008+AMD1:2015 CSV | Electric appliances connected to the water mains - Avoidance ofbacksiphonage and failure of hose-sets |
| IEC 60335-2-54:2008+AMD1:2015 CSV | Household and similar electrical appliances - Safety - Part 2-54:Particular requirements for surface-cleaning appliances for household use employing liquids or steam |
| ISO 15230:2007 | Mechanical vibration and shock Coupling forces at the manmachine interface for hand-transmitted vibration |
| ISO 3743-1:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.