• I.S. EN 61243-1:2005

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.

    Available format(s):  Hardcopy, PDF

    Superseded date:  13-07-2021

    Language(s):  English

    Published date:  01-01-2005

    Publisher:  National Standards Authority of Ireland

    For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
    Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

    Dates of withdrawal of national standards are available from NSAI.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    INTRODUCTION
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Requirements
      4.1 General requirements
      4.2 Functional requirements
      4.3 Electrical requirements
      4.4 Mechanical requirements
      4.5 Markings
      4.6 Instructions for use
    5 Specific requirements
      5.1 For insulating element of a voltage detector as a
          complete device
      5.2 For indicator casing of voltage detector as a separate
          device
    6 Tests
      6.1 General
      6.2 Function tests
      6.3 Dielectric tests
      6.4 Mechanical tests
    7 Specific tests
      7.1 Leakage current for voltage detector as a complete device
    8 Quality assurance plan and acceptance test
      8.1 General
      8.2 Records
    Annex A (normative) Suitable for live working; double triangle
    Annex B (normative) Instructions for use
    Annex C (normative) Chronology of tests
    Annex D (informative) Sampling procedure
          D.1 General
          D.2 Classification of defects
          D.3 General sampling plan
          D.4 Procedure when testing is carried out in a laboratory
              other than the manufacturer's
    Annex E (normative) Mechanical shock tests - Pendulum method
    Annex F (informative) Acceptance tests
    Annex G (informative) In-service care
          G.1 General
          G.2 Testing
    Annex ZA (normative) Normative references to international
                         publications with their corresponding
                         European publications
    Bibliography

    Abstract - (Show below) - (Hide below)

    Applies to portable voltage detectors, with or without built-in power sources, to be used on electrical systems for voltages of 1 kV to 765 kV a.c., and frequencies of 50 Hz and/or 60 Hz.

    General Product Information - (Show below) - (Hide below)

    Development Note For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
    Document Type Standard
    Publisher National Standards Authority of Ireland
    Status Superseded
    Superseded By

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 61477:2009 Live working - Minimum requirements for the utilization of tools, devices and equipment
    IEC 61672-2:2013+AMD1:2017 CSV Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests
    IEC 61936-1:2010+AMD1:2014 CSV Power installations exceeding 1 kV a.c. - Part 1: Common rules
    EN 20286-2 : 1993 ISO SYSTEM OF LIMITS AND FITS - TABLES OF STANDARD TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
    IEC TS 60479-1:2005+AMD1:2016 CSV Effects of current on human beings and livestock - Part 1: Generalaspects
    ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
    IEC 60855:1985 Insulating foam-filled tubes and solid rods for live working
    IEC 61235:1993 Live working - Insulating hollow tubes for electrical purposes
    IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
    IEC 60050-601:1985 International Electrotechnical Vocabulary (IEV) - Part 601: Generation, transmission and distribution of electricity - General
    IEC 60050-151:2001 International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
    IEC 60942:2003 Electroacoustics - Sound calibrators
    EN 60068-1:2014 Environmental testing - Part 1: General and guidance
    IEC 60743:2013 Live working - Terminology for tools, devices and equipment
    HD 588.1 : S1 AMD 1 HIGH VOLTAGE TEST TECHNIQUES - GENERAL DEFINITIONS AND TEST REQUIREMENTS
    EN 61318:2008 Live working - Conformity assessment applicable to tools, devices and equipment
    IEC 60050-101:1998 International Electrotechnical Vocabulary (IEV) - Part 101: Mathematics
    EN 20286-1 : 1993 ISO SYSTEM OF LIMITS AND FITS - BASES OF TOLERANCES, DEVIATIONS AND FITS
    EN 61672-1:2013 Electroacoustics - Sound level meters - Part 1: Specifications
    EN 61477:2009/corrigendum:2010 LIVE WORKING - MINIMUM REQUIREMENTS FOR THE UTILIZATION OF TOOLS, DEVICES AND EQUIPMENT
    EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
    ISO 286-1:2010 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits
    IEC 61318:2007 Live working - Conformity assessment applicable to tools, devices and equipment
    EN 60071-1:2006/A1:2010 INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES
    ISO 286-2:2010 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
    EN 60068-2-6:2008 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
    IEC 60050-651:2014 International Electrotechnical Vocabulary (IEV) - Part 651: Live working
    IEC 60060-1:2010 High-voltage test techniques - Part 1: General definitions and test requirements
    EN 60068-2-32:1993 Basic environmental testing procedures - Part 2: Tests - Test Ed: Free fall
    IEC 60071-1:2006+AMD1:2010 CSV Insulation co-ordination - Part 1: Definitions, principles and rules
    IEC 61260:1995 Electroacoustics - Octave-band and fractional-octave-band filters
    EN 60942:2003 Electroacoustics - Sound calibrators
    IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
    EN 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
    EN 61260:1995/A1:2001 ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective