I.S. EN 818-5:1999
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS - GRADE 4
Hardcopy , PDF
25-06-2008
English
24-09-1999
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Hazards
5 Safety requirements
5.1 Components of a chain sling
5.1.1 Chain
5.1.2 Links
5.1.3 Hooks
5.2 Design and construction
5.2.1 Assembly of chain slings
5.2.2 Endless chain slings
5.2.3 Tolerance on length of the chain sling
5.3 Working load rating
5.3.1 Single-leg chain slings
5.3.2 Multi-leg chain slings
5.3.3 Endless chain slings
6 Verification of safety requirements
6.1 Qualification of personnel
6.2 Components of a chain sling
6.3 Manufacturing proof force test for the chain sling
6.3.1 General
6.3.2 Manufacturing proof force factors
6.3.3 Post-test examination
7 Marking, labelling and packaging
7.1 General
7.2 Single-leg chain slings
7.3 Multi-leg chain slings rated for a range of angles from
0 degree to 45 degree to the vertical
8 Manufacturer's certificate
9 Information for use
Annex A (normative) Alternative method of rating and marking a
chain sling for a specific lifting application and not
for use in general lifting purposes
A.1 General
A.2 Alternative method of rating
A.3 Manufacturing proof force
A.4 Marking of chain slings rated by the alternative method
of rating
Annex B (informative) Bases for calculation of values for the
working load limits
B.1 Calculated values of working load limit (WLL) for
single-leg chain slings
B.2 Calculated values of working load limits (WLL) for
multi-leg chain slings
Annex C (informative) Designation system for chain slings - Grade 4
Annex D (informative) Identification tags for chain slings
D.1 General
D.2 Tags for chain slings
Annex ZA (informative) Relationship between this European Standard
and the Essential Requirements of EU Directive 98/37/EC
Annex ZB (informative) Relationship between this European Standard
and the Essential Requirements of EU Directive 2006/42/EC
Bibliography
Defines the requirements related to safety, methods of rating and testing single-, two-, three-, four-leg and endless chain slings, assembled by welding, using short link grade 4 medium tolerance chain conforming to EN 818-3:1999+A1 together with the appropriate range of components of the same grade in accordance with EN 1677-5:2001+A1 and EN 1677-6:2001+A1.
| DevelopmentNote |
1999 Edition Re-Issued in June 2008 & incorporates AMD 1 2008. (07/2008)
|
| DocumentType |
Standard
|
| Pages |
27
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| Standards | Relationship |
| NBN EN 818-5 : 1999 + A1 2008 | Identical |
| NF EN 818-5 : 1999 + A1 2008 | Identical |
| NS EN 818-5 : 1999 + A1 2008 | Identical |
| BS EN 818-5 : 1999 | Identical |
| EN 818-5:1999+A1:2008 | Identical |
| SN EN 818-5 : 1999 + A1 2008 | Identical |
| UNI EN 818-5 : 2008 | Identical |
| NEN EN 818-5 : 1999 + A1 2008 | Identical |
| UNE-EN 818-5:2000 | Identical |
| DIN EN 818-5:2008-12 | Identical |
| EN 1677-5:2001+A1:2008 | Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4 |
| EN 818-3:1999+A1:2008 | Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4 |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| EN 1677-6:2001+A1:2008 | Components for slings - Safety - Part 6: Links - Grade 4 |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 497:1973 | Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN 818-6:2000+A1:2008 | Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer |
| EN 818-1:1996+A1:2008 | Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance |
Important note : Users cannot be edited or removed once added to your Multi user PDF.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.