I.S. EN ISO 10472-4:2008
Current
The latest, up-to-date edition.
SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 4: AIR DRYERS
Hardcopy , PDF
English
01-01-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Definitions
4 Hazards
5 Safety requirements and/or measures for the hazards
identified in clause
5.1 General
5.2 Mechanical hazards
5.2.1 Tumble dryers
5.2.2 Tunnel finishers
5.3 Electrical hazards
5.4 Thermal hazards
5.4.1 Hot surfaces
5.4.2 Loading and unloading areas of the tunnel finisher
5.4.3 Steam spray in tunnel finishers
5.5 Hazards generated by noise
5.6 Hazards associated with materials and substances
5.6.1 Fire and explosion
5.6.2 Chemicals
5.7 Failure of control systems
6 Verification of safety requirements and/or measures
7 Information concerning machine use
7.1 Instruction handbook
7.2 Warning signs
Annex ZA (informative) - Relationship between this
European Standard and the
Essential Requirements of
EU Directive 98/37/EC
Annex ZB (informative) - Relationship between this
European Standard and the
Essential Requirements of
EU Directive 2006/42/EC
Specifies the most significant hazards associated with air dryers, and in particular with tumble dryers having a net usable cage volume > 160 l and tunnel finishers including associated conveyors and cabinet dryers.
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN EN ISO 10472-4 : 2008 | Identical |
| UNE-EN ISO 10472-4:2009 | Identical |
| NF EN ISO 10472-4 : 2009 | Identical |
| EN ISO 10472-4:2008 | Identical |
| BS EN ISO 10472-4:2008 | Identical |
| DIN EN ISO 10472-4:2009-09 | Identical |
| NS EN ISO 10472-4 : 2ED 2008 | Identical |
| UNI EN ISO 10472-4 : 2009 | Identical |
| ISO 10472-4:1997 | Identical |
| SN EN ISO 10472-4 : 2009 | Identical |
| NBN EN ISO 10472-4 : 2009 | Identical |
| IEC 60335-2-11:2008+AMD1:2012+AMD2:2015 CSV | Household and similar electrical appliances - Safety - Part 2-11:Particular requirements for tumble dryers |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| ISO 14119:2013 | Safety of machinery — Interlocking devices associated with guards — Principles for design and selection |
| EN 746-2:2010 | Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
| ISO 6182-1:2014 | Fire protection Automatic sprinkler systems Part 1: Requirements and test methods for sprinklers |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN 1760-1:1997+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| ISO 10472-1:1997 | Safety requirements for industrial laundry machinery Part 1: Common requirements |
| ISO 13853:1998 | Safety of machinery Safety distances to prevent danger zones being reached by the lower limbs |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN 1760-2:2001+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| EN ISO 10472-1:2008 | Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.