I.S. EN ISO 11553-1:2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 1: GENERAL SAFETY REQUIREMENTS
Hardcopy , PDF
13-05-2020
English
01-01-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Hazards
5 Safety requirements and measures
6 Verification of safety requirements and measures
7 Information for user
8 Labelling
Annex A (informative) - Potential hazards
Annex B (informative) - Protection against other hazards
Annex ZA (informative) Clauses of this European Standard
addressing essential requirements or other
provisions of EU directives 98/37/EC
Annex ZB (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
Specifies hazards generated by laser processing machines and specifies the safety requirements relating to radiation hazards and hazards generated by materials and substances. It also specifies the information to be supplied by the manufacturers of such equipment.
DevelopmentNote |
Supersedes I.S. EN 12626 (05/2005)
|
DocumentType |
Standard
|
Pages |
32
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
ONORM EN ISO 11553-1 : 2009 | Identical |
EN ISO 11553-1:2008 | Identical |
ISO 11553-1:2005 | Identical |
UNI EN ISO 11553-1 : 2009 | Identical |
DIN EN ISO 11553-1:2009-03 | Identical |
NF EN ISO 11553-1 : 2009 | Identical |
NEN EN ISO 11553-1 : 2009 | Identical |
SN EN ISO 11553-1 : 2010 | Identical |
UNE-EN ISO 11553-1:2009 | Identical |
BS EN ISO 11553-1:2008 | Identical |
NS EN ISO 11553-1 : 2ED 2008 | Identical |
NBN EN ISO 11553-1 : 2009 | Identical |
EN 208 : 1998 | PERSONAL EYE-PROTECTION - EYE-PROTECTORS FOR ADJUSTMENT WORK ON LASERS AND LASER SYSTEMS (LASER ADJUSTMENT EYE-PROTECTORS) |
ISO 14119:2013 | Safety of machinery — Interlocking devices associated with guards — Principles for design and selection |
ISO 11252:2013 | Lasers and laser-related equipment — Laser device — Minimum requirements for documentation |
EN 168:2001 | Personal eye-protection - Non-optical test methods |
IEC 60825-4:2006+AMD1:2008+AMD2:2011 CSV | Safety of laser products - Part 4: Laser guards |
IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
ISO 14118:2000 | Safety of machinery Prevention of unexpected start-up |
EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
IEC 60601-2-22:2007+AMD1:2012 CSV | Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment |
EN 207:2017 | Personal eye-protection equipment - Filters and eye-protectors against laser radiation (laser eye-protectors) |
EN 563:1994/A1:1999/AC:2000 | SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES |
EN 165:2005 | Personal eye-protection - Vocabulary |
EN 166:2001 | Personal eye-protection - Specifications |
EN 169:2002 | Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended use |
EN 167:2001 | Personal eye-protection - Optical test methods |
ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
EN 171:2002 | Personal eye-protection - Infrared filters - Transmittance requirements and recommended use |
ISO 2631-1:1997 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements |
EN 170:2002 | Personal eye-protection - Ultraviolet filters - Transmittance requirements and recommended use |
ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
ISO 11145:2016 | Optics and photonics Lasers and laser-related equipment Vocabulary and symbols |
ISO 3864:1984 | Safety colours and safety signs |
ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
EN 1070 : 1998 | SAFETY OF MACHINERY - TERMINOLOGY |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.