I.S. EN ISO 11681-2:2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 2: CHAIN-SAWS FOR TREE SERVICE (ISO 11681-2:2011)
Hardcopy , PDF
24-06-2022
English
01-01-2011
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
National Foreword
European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements and/or protective measures
5 Information for use
Annex A (informative) - Working with tree service
chain-saws from rope and harness
Annex B (informative) - List of significant hazards
Bibliography
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 2006/42/EC
Defines all significant hazards, hazardous situations and hazardous events relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
DocumentType |
Standard
|
Pages |
56
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
ISO 11681-2:2011 | Identical |
UNI EN ISO 11681-2 : 2012 | Identical |
NS EN ISO 11681-2 : 2011 AMD 1 2017 | Identical |
NBN EN ISO 11681-2 : 2012 | Identical |
BS EN ISO 11681-2 : 2011 | Identical |
NEN EN ISO 11681-2 : 2011 AMD 1 2017 | Identical |
NF EN ISO 11681-2 : 2012 AMD 1 2017 | Identical |
UNE-EN ISO 11681-2:2012 | Identical |
ONORM EN ISO 11681-2 : 2017 | Identical |
DIN EN ISO 11681-2:2012-04 | Identical |
ISO/TR 22520:2005 | Portable hand-held forestry machines A-weighted emission sound pressure levels at the operator's station Comparative data in 2002 |
ISO 22867:2011 | Forestry and gardening machinery Vibration test code for portable hand-held machines with internal combustion engine Vibration at the handles |
ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
ISO/TR 22521:2005 | Portable hand-held forestry machines Vibration emission values at the handles Comparative data in 2002 |
ISO 8334:2007 | Forestry machinery Portable chain-saws Determination of balance and maximum holding moment |
ISO 6535:2015 | Portable chain-saws Chain brake performance |
ISO 7293:1997 | Forestry machinery Portable chain saws Engine performance and fuel consumption |
ISO 7914:2002 | Forestry machinery — Portable chain-saws — Minimum handle clearance and sizes |
ISO 17080:2005 | Manually portable agricultural and forestry machines and powered lawn and garden equipment — Design principles for single-panel product safety labels |
ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
CR 1030-1:1995 | Hand-arm vibration - Guidelines for vibration hazards reduction - Part 1: Engineering methods by design of machinery |
ISO 6533:2012 | Forestry machinery Portable chain-saw front hand-guard Dimensions and clearances |
ISO 11820:1996 | Acoustics — Measurements on silencers in situ |
ISO 14982:1998 | Agricultural and forestry machinery Electromagnetic compatibility Test methods and acceptance criteria |
ISO 6531:2017 | Machinery for forestry — Portable chain-saws — Vocabulary |
ISO 9518:1998 | Forestry machinery Portable chain-saws Kickback test |
ISO 6534:2007 | Forestry machinery — Portable chain-saw hand-guards — Mechanical strength |
ISO 13849-2:2012 | Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
ISO 3767-5:2016 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 5: Symbols for manual portable forestry machines |
IEC 60745-1:2006 | Hand-held motor-operated electric tools - Safety - Part 1: General requirements |
ISO 14163:1998 | Acoustics — Guidelines for noise control by silencers |
ISO 22868:2011 | Forestry and gardening machinery Noise test code for portable hand-held machines with internal combustion engine Engineering method (Grade 2 accuracy) |
ISO 10726:1992 | Portable chain saws Chain catcher Dimensions and mechanical strength |
ISO 7915:1991 | Forestry machinery Portable chain-saws Determination of handle strength |
ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
ISO/TR 11688-2:1998 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
ISO 11691:1995 | Acoustics Measurement of insertion loss of ducted silencers without flow Laboratory survey method |
ISO 11684:1995 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Safety signs and hazard pictorials — General principles |
ISO 13772:2009 | Forestry machinery Portable chain-saws Non-manually actuated chain brake performance |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.