I.S. EN ISO 12215-3:2002
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 3: MATERIALS: STEEL, ALUMINIUM ALLOYS, WOOD, OTHER MATERIALS
Hardcopy , PDF
English
01-01-2002
07-02-2019
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements for metal
5 Requirements for wood
6 Requirements for other materials
7 Documentation
8 Owner's manual
Annex A (normative) Information to be provided
in the owner's manual
Bibliography
Specifies requirements for materials intended for use in the construction of the hull, superstructure and appendages.
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| DIN EN ISO 12215-3:2002-09 | Identical |
| EN ISO 12215-3:2002 | Identical |
| ONORM EN ISO 12215-3 : 2002 | Identical |
| ISO 12215-3:2002 | Identical |
| NF EN ISO 12215-3 : 2002 | Identical |
| BS EN ISO 12215-3:2002 | Identical |
| NS EN ISO 12215-3 : 1ED 2002 | Identical |
| NEN EN ISO 12215-3 : 2002 | Identical |
| UNE-EN ISO 12215-3:2003 | Identical |
| ISO 209-1:1989 | Wrought aluminium and aluminium alloys — Chemical composition and forms of products — Part 1: Chemical composition |
| ISO 3348:1975 | Wood — Determination of impact bending strength |
| ISO 2300:1973 | Sawn timber of broadleaved species — Defects — Terms and definitions |
| ISO 6362-2:2014 | Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties |
| ISO 8905:1988 | Sawn timber — Test methods — Determination of ultimate strength in shearing parallel to grain |
| ISO 2299:1973 | Sawn timber of broadleaved species — Defects — Classification |
| ISO 8666:2016 | Small craft — Principal data |
| ISO 3130:1975 | Wood — Determination of moisture content for physical and mechanical tests |
| ISO 1031:1974 | Coniferous sawn timber — Defects — Terms and definitions |
| ISO 4476:1983 | Coniferous and broadleaved sawlogs — Sizes — Vocabulary |
| ISO 3346:1975 | Wood — Determination of ultimate tensile stress perpendicular to grain |
| ISO 4948-1:1982 | Steels — Classification — Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition |
| ISO 3132:1975 | Wood — Testing in compression perpendicular to grain |
| ISO 2301:1973 | Sawn timber of broadleaved species — Defects — Measurement |
| ISO 8906:1988 | Sawn timber — Test methods — Determination of resistance to local transverse compression |
| ISO 8375:2017 | Timber structures — Glued laminated timber — Test methods for determination of physical and mechanical properties |
| ISO 3133:1975 | Wood — Determination of ultimate strength in static bending |
| ISO 6361-2:2014 | Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 2: Mechanical properties |
| ISO 1098:1975 | Veneer plywood for general use — General requirements |
| ISO 12215-4:2002 | Small craft — Hull construction and scantlings — Part 4: Workshop and manufacturing |
| ISO 3347:1976 | Wood — Determination of ultimate shearing stress parallel to grain |
| ISO 3349:1975 | Wood — Determination of modulus of elasticity in static bending |
| ISO 4948-2:1981 | Steels — Classification — Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
| ISO 3131:1975 | Wood — Determination of density for physical and mechanical tests |
| ISO 1032:1974 | Coniferous sawn timber — Sizes — Terms and definitions |
| ISO 1029:1974 | Coniferous sawn timber — Defects — Classification |
| ISO 4474:1989 | Coniferous and broadleaved tree sawlogs — Visible defects — Terms and definitions |
| ISO 2074:2007 | Plywood — Vocabulary |
| ISO 1096:2014 | Plywood — Classification |
| ISO 3129:2012 | Wood — Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens |
| ISO 3345:1975 | Wood — Determination of ultimate tensile stress parallel to grain |
| ISO 9086-1:1987 | Wood — Methods of physical and mechanical testing — Vocabulary — Part 1: General concepts and macrostructure |
| ISO 3787:1976 | Wood — Test methods — Determination of ultimate stress in compression parallel to grain |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.