I.S. EN ISO 13791:2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
THERMAL PERFORMANCE OF BUILDINGS - CALCULATION OF INTERNAL TEMPERATURES OF A ROOM IN SUMMER WITHOUT MECHANICAL COOLING - GENERAL CRITERIA AND VALIDATION PROCEDURES (ISO 13791:2012)
Hardcopy , PDF
06-08-2017
English
01-01-2012
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols and units
4 Determination of internal temperatures
5 Determination of internal humidity
6 Procedure for carrying out calculations
7 Report of the calculation
8 Validation procedures
Annex A (informative) - Example of solution
technique
Annex B (informative) - Convective heat transfer
through ventilated air layer
Annex C (informative) - Shading due to overhangs
and side fins
Annex D (informative) - Design climatic data in
the warm season
Annex E (informative) - Calculation of the internal
long-wave radiation exchanges in buildings
Annex F (informative) - External radiative long-wave
heat transfer coefficients
Annex G (informative) - Solar factors
Annex H (informative) - Internal gains
Annex I (informative) - Air ventilation
Annex J (informative) - Detailed results of the
validation tests considered in the 'whole
model' procedure
Annex K (informative) - Calculation method for internal
humidity without moisture absorption into
or desorption from walls and other structures
Annex L (informative) - Normative references to
international publications with their
corresponding European publications
Bibliography
Defines the assumptions, boundary conditions, equations and validation tests for a calculation procedure, under transient hourly conditions, of the internal temperatures (air and operative) during warm periods, of a single room without any cooling/heating equipment in operation.
| DocumentType |
Standard
|
| Pages |
113
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN EN ISO 13791 : 2012 | Identical |
| NBN EN ISO 13791 : 2012 | Identical |
| UNI EN ISO 13791 : 2005 | Identical |
| NF EN ISO 13791 : 2012 | Identical |
| EN ISO 13791:2012 | Identical |
| NS EN ISO 13791 : 2012 | Identical |
| ISO 13791:2012 | Identical |
| SN EN ISO 13791 : 2012 | Identical |
| BS EN ISO 13791:2004 | Identical |
| DIN EN ISO 13791:2012-08 | Identical |
| EN 673:2011 | Glass in building - Determination of thermal transmittance (U value) - Calculation method |
| ISO 9346:2007 | Hygrothermal performance of buildings and building materials — Physical quantities for mass transfer — Vocabulary |
| EN 410:2011 | Glass in building - Determination of luminous and solar characteristics of glazing |
| ISO 15099:2003 | Thermal performance of windows, doors and shading devices — Detailed calculations |
| EN ISO 9346:2007 | Hygrothermal performance of buildings and building materials - Physical quantities for mass transfer - Vocabulary (ISO 9346:2007) |
| ISO 10077-2:2017 | Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 2: Numerical method for frames |
| EN ISO 9251:1995 | Thermal insulation - Heat transfer conditions and properties of materials - Vocabulary (ISO 9251:1987) |
| EN ISO 10077-2:2017 | Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames (ISO 10077-2:2017) |
| EN ISO 6946:2017 | Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods (ISO 6946:2017, Corrected version 2021-12) |
| EN ISO 9288:1996 | Thermal insulation - Heat transfer by radiation - Physical quantities and definitions (ISO 9288:1989) |
| ISO 9288:1989 | Thermal insulation — Heat transfer by radiation — Physical quantities and definitions |
| ISO 9050:2003 | Glass in building — Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors |
| ISO 13370:2017 | Thermal performance of buildings — Heat transfer via the ground — Calculation methods |
| EN ISO 15927-2:2009 | Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 2: Hourly data for design cooling load (ISO 15927-2:2009) |
| EN ISO 13370:2017 | Thermal performance of buildings - Heat transfer via the ground - Calculation methods (ISO 13370:2017) |
| ISO 15927-2:2009 | Hygrothermal performance of buildings Calculation and presentation of climatic data Part 2: Hourly data for design cooling load |
| ISO 6946:2017 | Building components and building elements — Thermal resistance and thermal transmittance — Calculation methods |
| ISO 10077-1:2017 | Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 1: General |
| ISO 9251:1987 | Thermal insulation Heat transfer conditions and properties of materials Vocabulary |
| ISO 7345:1987 | Thermal insulation Physical quantities and definitions |
| ISO 10292:1994 | Glass in building — Calculation of steady-state U values (thermal transmittance) of multiple glazing |
| EN ISO 10077-1:2017 | Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General (ISO 10077-1:2017, Corrected version 2020-02) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.