I.S. EN ISO 15630-2:2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC
Available format(s)
Hardcopy , PDF
Superseded date
04-04-2019
Superseded by
Language(s)
English
Published date
01-01-2010
Publisher
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Symbols
4 General provisions concerning test pieces
5 Tensile test
6 Bend test on welded intersection
7 Determination of the weld shear force (F[s])
8 Axial force fatigue test
9 Chemical analysis
10 Measurement of the geometrical characteristics of
the fabric
11 Test report
Bibliography
Defines test methods applicable to welded fabric for the reinforcement of concrete.
| DevelopmentNote |
Supersedes I.S. ENV 10080. (10/2005)
|
| DocumentType |
Standard
|
| Pages |
31
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| SN EN ISO 15630-2 : 2010 | Identical |
| NBN EN ISO 15630-2 : 2010 | Identical |
| UNE-EN ISO 15630-2:2003 | Identical |
| EN ISO 15630-2:2010 | Identical |
| BS EN ISO 15630-2:2010 | Identical |
| NEN EN ISO 15630-2 : 2010 | Identical |
| ISO 15630-2:2010 | Identical |
| NS EN ISO 15630-2 : 2010 | Identical |
| NF EN ISO 15630-2 : 2010 | Identical |
| UNI EN ISO 15630-2 : 2010 | Identical |
| DIN EN ISO 15630-2:2011-02 | Identical |
| ONORM EN ISO 15630-2 : 2011 | Identical |
| ISO 4945:1977 | Steel Determination of nitrogen content Spectrophotometric method |
| ISO 10701:1994 | Steel and iron — Determination of sulfur content — Methylene blue spectrophotometric method |
| ISO 13898-2:1997 | Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 2: Determination of nickel content |
| ISO 671:1982 | Steel and cast iron Determination of sulphur content Combustion titrimetric method |
| ISO 4947:1986 | Steel and cast iron Determination of vanadium content Potentiometric titration method |
| ISO 10697-1:1992 | Steel — Determination of calcium content by flame atomic absorption spectrometry — Part 1: Determination of acid-soluble calcium content |
| ISO 15353:2001 | Steel and iron — Determination of tin content — Flame atomic absorption spectrometric method (extraction as Sn-SCN) |
| ISO 4946:2016 | Steel and cast iron Determination of copper 2,2'-Biquinoline spectrophotometric method |
| ISO/TR 17055:2002 | Steel Determination of silicon content Inductively coupled plasma atomic emission spectrometric method |
| ISO 11652:1997 | Steel and iron Determination of cobalt content Flame atomic absorption spectrometric method |
| ISO 17053:2005 | Steel and iron — Determination of oxygen — Infrared method after fusion under inert gas |
| ISO 10702:1993 | Steel and iron — Determination of nitrogen content — Titrimetric method after distillation |
| ISO 13898-3:1997 | Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 3: Determination of copper content |
| ISO 4829-1:1986 | Steel and cast iron Determination of total silicon content Reduced molybdosilicate spectrophotometric method Part 1: Silicon contents between 0,05 and 1,0 % |
| ISO 4941:1994 | Steel and iron — Determination of molybdenum content — Thiocyanate spectrophotometric method |
| ISO 13900:1997 | Steel — Determination of boron content — Curcumin spectrophotometric method after distillation |
| ISO 10278:1995 | Steel — Determination of manganese content — Inductively coupled plasma atomic emission spectrometric method |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 4937:1986 | Steel and iron — Determination of chromium content — Potentiometric or visual titration method |
| ISO 13902:1997 | Steel and iron — Determination of high sulfur content — Infrared absorption method after combustion in an induction furnace |
| ISO 4943:1985 | Steel and cast iron — Determination of copper content — Flame atomic absorption spectrometric method |
| ISO 629:1982 | Steel and cast iron — Determination of manganese content — Spectrophotometric method |
| ISO 4939:2016 | Steel Determination of nickel Dimethylglyoxime spectrophotometric method |
| ISO 4935:1989 | Steel and iron — Determination of sulfur content — Infrared absorption method after combustion in an induction furnace |
| ISO 17058:2004 | Steel and iron — Determination of arsenic content — Spectrophotometric method |
| ISO/TR 15349-3:1998 | Unalloyed steel Determination of low carbon content Part 3: Infrared absorption method after combustion in an electric resistance furnace (with preheating) |
| ISO 13898-4:1997 | Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 4: Determination of cobalt content |
| ISO/TS 13899-3:2005 | Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 3: Determination of W content |
| ISO 10280:1991 | Steel and iron — Determination of titanium content — Diantipyrylmethane spectrometric method |
| ISO 4938:2016 | Steel and iron Determination of nickel content Gravimetric or titrimetric method |
| ISO 9513:2012 | Metallic materials — Calibration of extensometer systems used in uniaxial testing |
| ISO/TR 10719:1994 | Steel and iron Determination of non-combined carbon content Infrared absorption method after combustion in an induction furnace |
| ISO 439:1994 | Steel and iron Determination of total silicon content Gravimetric method |
| ISO 7438:2016 | Metallic materials Bend test |
| ISO 11653:1997 | Steel — Determination of high cobalt content — Potentiometric titration method after separation by ion exchange |
| ISO 4942:2016 | Steels and irons Determination of vanadium content N-BPHA spectrophotometric method |
| ISO/TR 4830-4:1978 | Steel Determination of low carbon contents Part 4: Coulometric method after combustion |
| ISO 437:1982 | Steel and cast iron Determination of total carbon content Combustion gravimetric method |
| ISO 9658:1990 | Steel — Determination of aluminium content — Flame atomic absorption spectrometric method |
| ISO/TS 13899-1:2004 | Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 1: Determination of Mo content |
| ISO 4940:1985 | Steel and cast iron — Determination of nickel content — Flame atomic absorption spectrometric method |
| ISO 10700:1994 | Steel and iron — Determination of manganese content — Flame atomic absorption spectrometric method |
| ISO 15351:1999 | Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas (Routine method) |
| ISO 10714:1992 | Steel and iron — Determination of phosphorus content — Phosphovanadomolybdate spectrophotometric method |
| ISO 4829-2:2016 | Steels Determination of total silicon contents Reduced molybdosilicate spectrophotometric method Part 2: Silicon contents between 0,01 % and 0,05 % |
| ISO 15349-2:1999 | Unalloyed steel Determination of low carbon content Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) |
| ISO 17054:2010 | Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near-by technique |
| ISO 9647:1989 | Steel and iron Determination of vanadium content Flame atomic absorption spectrometric method |
| ISO 13899-2:2005 | Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 2: Determination of Nb content |
| ISO 9441:1988 | Steel — Determination of niobium content — PAR spectrophotometric method |
| ISO 15350:2000 | Steel and iron — Determination of total carbon and sulfur content — Infrared absorption method after combustion in an induction furnace (routine method) |
| ISO 13898-1:1997 | Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 1: General requirements and sample dissolution |
| ISO 9556:1989 | Steel and iron — Determination of total carbon content — Infrared absorption method after combustion in an induction furnace |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| ISO 4934:2003 | Steel and iron Determination of sulfur content Gravimetric method |
| ISO 16918-1:2009 | Steel and iron — Determination of nine elements by the inductively coupled plasma mass spectrometric method — Part 1: Determination of tin, antimony, cerium, lead and bismuth |
| ISO 10720:1997 | Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas |
| ISO 10153:1997 | Steel — Determination of boron content — Curcumin spectrophotometric method |
| ISO 10698:1994 | Steel — Determination of antimony content — Electrothermal atomic absorption spectrometric method |
| ISO 10138:1991 | Steel and iron — Determination of chromium content — Flame atomic absorption spectrometric method |
| ISO 10697-2:1994 | Steel — Determination of calcium content by flame atomic absorption spectrometry — Part 2: Determination of total calcium content |
| ISO/TR 15349-1:1998 | Unalloyed steel Determination of low carbon content Part 1: Infrared absorption method after combustion in an electric resistance furnace (by peak separation) |
| ISO 15355:1999 | Steel and iron — Determination of chromium content — Indirect titration method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.