I.S. EN ISO 16923:2018
Current
The latest, up-to-date edition.
NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES (ISO 16923:2016)
Hardcopy , PDF
English
23-04-2018
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Risk management
6 General design requirements
7 Fuel supply to the fuelling station
8 Dryer
9 Compressors
10 Buffer storage
11 Dispensers
12 Gas odorization
13 Pipework
14 Electrical
15 Instrumentation and control system
16 Emergency shutdown
17 Indoor fuelling
18 Testing and commissioning
19 Operation
20 Inspection and maintenance
Annex A (informative) Examples of hazardous zone classification
Annex B (normative) Separation distances
Annex C (informative) Fuelling procedures
Annex D (informative) Emergency instructions example
Annex E (informative) Example of fuelling station periodic inspection and maintenance
Bibliography
Describes the design, construction, operation, inspection and maintenance of stations for fuelling compressed natural gas (CNG) to vehicles, including equipment, safety and control devices.
| Committee |
TMBG
|
| DocumentType |
Standard
|
| Pages |
62
|
| ProductNote |
The date of any NSAI previous adoption may not match the date of its original CEN/CENELEC document. THIS STANDARD ALSO REFERS TO ISO 15403-2
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| ISO 16923:2016 | Identical |
| EN ISO 16923:2018 | Identical |
| IEC 60079-1:2014 RLV | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| ISO 15649:2001 | Petroleum and natural gas industries — Piping |
| ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
| ISO 11119-2:2012 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners |
| ISO 15500-17:2012 | Road vehicles Compressed natural gas (CNG) fuel system components Part 17: Flexible fuel line |
| ISO 4126-1:2013 | Safety devices for protection against excessive pressure — Part 1: Safety valves |
| ISO 14120:2015 | Safety of machinery Guards General requirements for the design and construction of fixed and movable guards |
| IEC 61340-4-4:2012+AMD1:2014 CSV | Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediatebulk containers (FIBC) |
| IEC/ISO 31010:2009 | Risk management - Risk assessment techniques |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| ISO 15500-2:2016 | Road vehicles — Compressed natural gas (CNG) fuel system components — Part 2: Performance and general test methods |
| IEC 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
| ISO 13734:2013 | Natural gas — Organic components used as odorants — Requirements and test methods |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| ISO 13686:2013 | Natural gas Quality designation |
| ISO/TR 14121-2:2012 | Safety of machinery — Risk assessment — Part 2: Practical guidance and examples of methods |
| ISO 11119-4:2016 | Gas cylinders Refillable composite gas cylinders Design, construction and testing Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners |
| ISO 15403-1:2006 | Natural gas Natural gas for use as a compressed fuel for vehicles Part 1: Designation of the quality |
| ISO 13847:2013 | Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines |
| IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| ISO 15589-1:2015 | Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline systems — Part 1: On-land pipelines |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| ISO 11925-3:1997 | Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 3: Multi-source test |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 8580:1987 | Rubber and plastics hoses Determination of ultra-violet resistance under static conditions |
| IEC 60079-29-2:2015 RLV | Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
| IEC 60079-25:2010 | Explosive atmospheres - Part 25: Intrinsically safe electrical systems |
| ISO 11623:2015 | Gas cylinders — Composite construction — Periodic inspection and testing |
| ISO 14469:2017 | Road vehicles Compressed natural gas (CNG) refuelling connector |
| ISO 9809-2:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| ISO 10461:2005 | Gas cylinders Seamless aluminium-alloy gas cylinders Periodic inspection and testing |
| ISO 11119-1:2012 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l |
| ISO 6406:2005 | Gas cylinders Seamless steel gas cylinders Periodic inspection and testing |
| ISO 834-1:1999 | Fire-resistance tests Elements of building construction Part 1: General requirements |
| ISO 9809-1:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
| ISO 11119-3:2013 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners |
| ISO 11439:2013 | Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.