I.S. EN ISO 21003-2:2008
Current
The latest, up-to-date edition.
MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 2: PIPES
Hardcopy , PDF
English
01-01-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Material
5.1 General
5.2 Processable materials
5.3 Influence on water intended for human consumption
6 General characteristics
6.1 Appearance
6.2 Opacity
7 Construction
8 Geometrical characteristics
8.1 General
8.2 Dimensions of pipes
9 Pressure strength
9.1 Long-term pressure strength (p[LPL])
9.2 Design pressure strength (p[D])
10 Thermal durability
10.1 Thermal durability of P-pipes
10.2 Thermal durability of M-pipes
11 Strength of the weld line of M-pipes
12 Delamination
12.1 Multilayer P-pipes
12.2 Multilayer M-pipes
13 Oxygen permeability
14 Physical and chemical characteristics
15 Performance requirements
16 Marking
16.1 General requirements
16.2 Minimum required marking
Annex A (normative) - List of reference product standards
Annex B (normative) - Design coefficients for multilayer pipes
Annex C (normative) - Determination of the thermal durability of
the outer layer of M-pipes from resistance
to cracking after oven ageing
Annex D (normative) - Determination of the thermal durability of
the outer layer of M-pipes from the
elongation at break after 50 years
Annex E (normative) - Multilayer M-pipes - Choice of p[D] and the
use of Miner's rule
Bibliography
Defines the characteristics of pipes for multilayer piping systems intended to be used for hot and cold water installations inside buildings for the conveyance of water - whether or not the water is intended for human consumption (domestic systems) or heating systems - under specified design pressures and temperatures appropriate to the class of application.
| DocumentType |
Standard
|
| Pages |
43
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| ISO 21003-2:2008 | Identical |
| ISO 2578:1993 | Plastics Determination of time-temperature limits after prolonged exposure to heat |
| EN 12293:1999 | Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling |
| ISO 161-1:1996 | Thermoplastics pipes for the conveyance of fluids Nominal outside diameters and nominal pressures Part 1: Metric series |
| ISO 9080:2012 | Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation |
| ISO 17456:2006 | Plastics piping systems Multilayer pipes Determination of long-term strength |
| ISO 15877-2:2009 | Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes |
| ISO 15875-2:2003 | Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| ISO 15874-2:2013 | Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes |
| ISO 6259-1:2015 | Thermoplastics pipes Determination of tensile properties Part 1: General test method |
| ISO 3126:2005 | Plastics piping systems Plastics components Determination of dimensions |
| ISO 22391-2:2009 | Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes |
| EN 713:1993 | Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending |
| ISO 17455:2005 | Plastics piping systems Multilayer pipes Determination of the oxygen permeability of the barrier pipe |
| ISO 10508:2006 | Plastics piping systems for hot and cold water installations — Guidance for classification and design |
| ISO 15876-2:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes |
| ISO 21003-1:2008 | Multilayer piping systems for hot and cold water installations inside buildings — Part 1: General |
| ISO/TS 21003-7:2008 | Multilayer piping systems for hot and cold water installations inside buildings Part 7: Guidance for the assessment of conformity |
| ISO 21003-3:2008 | Multilayer piping systems for hot and cold water installations inside buildings — Part 3: Fittings |
| ISO 13760:1998 | Plastics pipes for the conveyance of fluids under pressure — Miner's rule — Calculation method for cumulative damage |
| ISO 17454:2006 | Plastics piping systems Multilayer pipes Test method for the adhesion of the different layers using a pulling rig |
| ISO 7686:2005 | Plastics pipes and fittings — Determination of opacity |
| ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.