Skip to content
Please enter a keyword to search

  • ISO 21003-5:2008

    Current The latest, up-to-date edition.

    Multilayer piping systems for hot and cold water installations inside buildings — Part 5: Fitness for purpose of the system

    Available format(s):  Hardcopy, PDF

    Language(s):  English, French, Russian

    Published date:  30-06-2008

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 21003-5:2008 specifies the characteristics for the fitness for purpose of multilayer piping systems intended to be used for hot and cold water installations inside buildings for the conveyance of water — whether or not the water is intended for human consumption (domestic systems) or for heating systems — under specified design pressures and temperatures appropriate to the class of application.

    It also specifies the test parameters for the test methods referred to in this part of ISO 21003.

    ISO 21003 is a reference product standard. It is applicable to multilayer pipes, fittings, their joints, and also to joints with components made of other plastics and non-plastics materials intended to be used for hot and cold water installations. ISO 21003-5 is intended for use only in conjunction with all the other parts of ISO 21003.

    General Product Information - (Show below) - (Hide below)

    Committee ISO/TC 138/SC 2
    Development Note Supersedes ISO/DIS 21003-5. (07/2008)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    ISO 21003-1:2008 Multilayer piping systems for hot and cold water installations inside buildings — Part 1: General
    I.S. EN 1254-6:2012 COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 6: FITTINGS WITH PUSH-FIT ENDS
    UNI EN 1254-6 : 2012 COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 6: FITTINGS WITH PUSH-FIT ENDS
    EN ISO 21003-2:2008/A1:2011 Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes - Amendment 1 (ISO 21003-2:2008/Amd 1:2011)
    CEN ISO/TS 21003-7:2008/A1:2010 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    BS EN ISO 21003-2 : 2008 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 2: PIPES
    ISO 15874-1:2013 Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General
    DD CEN ISO/TS 21003-7 : 2008 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    I.S. EN 1264-4:2009 WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION
    ISO 21003-2:2008 Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes
    ONORM EN 1264-4 : 2009 WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION
    DIN EN ISO 21003-2:2011-07 Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes (ISO 21003-2:2008 + Amd 1:2011) (includes Amendment A1:2011)
    DIN EN 1264-4:2009-11 Water based surface embedded heating and cooling systems - Part 4: Installation
    DIN EN 1254-6:2012-12 Copper and copper alloys - Plumbing fittings - Part 6: Fittings with push-fit ends
    UNI EN ISO 15874-1 : 2013 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 1: GENERAL
    ONORM EN ISO 21003-1 : 2012 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL (ISO 21003-1:2008)
    S.R. CEN ISO TS 21003-7:2008 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    EN 1264-4:2009 Water based surface embedded heating and cooling systems - Part 4: Installation
    UNE-EN 1254-6:2013 Copper and copper alloys - Plumbing fittings - Part 6: Fittings with push-fit ends
    UNE-EN 1264-4:2010 Water based surface embedded heating and cooling systems - Part 4: Installation
    DIN EN ISO 15874-2:2004-03 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP)
    DIN EN ISO 15874-1:2004-03 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP)
    DIN EN ISO 21003-1:2008-11 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL
    ONORM EN ISO 21003-3 : 2008 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 3: FITTINGS
    UNI EN ISO 21003-2 : 2011 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 2: PIPES
    UNI EN ISO 21003-1 : 2009 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL
    BS EN ISO 21003-1:2008 Multilayer piping systems for hot and cold water installations inside buildings General
    UNI CEN ISO/TS 21003-7 : 2010 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    I.S. EN ISO 15874-1:2013 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 1: GENERAL (ISO 15874-1:2013)
    BS EN 1254-6:2012 Copper and copper alloys. Plumbing fittings Fittings with push-fit ends
    ISO 21003-3:2008 Multilayer piping systems for hot and cold water installations inside buildings — Part 3: Fittings
    UNI EN 1264-4 : 2009 WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION
    UNE-EN ISO 15874-1:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2013)
    EN ISO 15874-1:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2013)
    EN ISO 21003-1:2008 Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General (ISO 21003-1:2008)
    BS EN ISO 21003-3:2008 Multilayer piping systems for hot and cold water installations inside buildings Fittings
    BS EN ISO 15874-1:2013 Plastics piping systems for hot and cold water installations. Polypropylene (PP) General
    EN 1254-6:2012 Copper and copper alloys - Plumbing fittings - Part 6: Fittings with push-fit ends
    ISO/TS 21003-7:2008 Multilayer piping systems for hot and cold water installations inside buildings Part 7: Guidance for the assessment of conformity
    UNI EN ISO 21003-3 : 2009 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 3: FITTINGS
    EN ISO 21003-3:2008 Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings (ISO 21003-3:2008)
    BS EN 1264-4:2009 Water based surface embedded heating and cooling systems Installation
    DIN EN ISO 21003-3:2008-11 Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings (ISO 21003-3:2008)
    I.S. EN ISO 21003-3:2008 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 3: FITTINGS

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 12293:1999 Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling
    ISO 1167-2:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces
    ISO 15875-5:2003 Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system
    ISO 1167-4:2007 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 4: Preparation of assemblies
    ISO 17456:2006 Plastics piping systems Multilayer pipes Determination of long-term strength
    ISO 22391-5:2009 Plastics piping systems for hot and cold water installations Polyethylene of raised temperature resistance (PE-RT) Part 5: Fitness for purpose of the system
    ISO 15877-5:2009 Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 5: Fitness for purpose of the system
    EN 713:1993 Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
    ENV 12108:2001 Plastics piping systems - Guidance for the installation inside buildings of pressure piping systems for hot and cold water intended for human consumption
    ISO 1167-3:2007 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 3: Preparation of components
    ISO 21003-2:2008 Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes
    ISO 21003-1:2008 Multilayer piping systems for hot and cold water installations inside buildings — Part 1: General
    EN 12295:1999 Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test method for resistance of joints to pressure cycling
    ISO/TS 21003-7:2008 Multilayer piping systems for hot and cold water installations inside buildings Part 7: Guidance for the assessment of conformity
    ISO 21003-3:2008 Multilayer piping systems for hot and cold water installations inside buildings — Part 3: Fittings
    ISO 13760:1998 Plastics pipes for the conveyance of fluids under pressure — Miner's rule — Calculation method for cumulative damage
    EN 12294:1999 Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum
    ISO 15874-5:2013 Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system
    ISO 15876-5:2017 Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 5: Fitness for purpose of the system
    EN 712:1993 Thermoplastics piping systems - End-load bearing mechanical joints between pressure pipes and fittings - Test method for resistance to pull-out under constant longitudinal force
    ISO 1167-1:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 1: General method
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective