I.S. EN ISO 7599:2018
Current
The latest, up-to-date edition.
ANODIZING OF ALUMINIUM AND ITS ALLOYS - METHOD FOR SPECIFYING DECORATIVE AND PROTECTIVE ANODIC OXIDATION COATINGS ON ALUMINIUM (ISO 7599:2018)
Hardcopy , PDF
English
01-01-2018
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
National Foreword
European foreword
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Information supplied by the customer to the anodizer
5 Tests
6 Coating thickness
7 Quality of sealing
8 Appearance and colour
9 Corrosion resistance
10 Abrasion (wear) resistance
11 Resistance to cracking by deformation
12 Fastness to light and ultraviolet radiation
13 Light reflection properties
14 Electrical breakdown potential
15 Continuity of coating
16 Mass per unit area (surface density) of coating
Annex A (informative) - Guide to grades of aluminium
for anodizing
Annex B (informative) - Guidance on surface preparation
Annex C (normative) - Interpretation of average and
local thickness requirements
Annex D (informative) - Calibration standards for
eddy-current apparatus used to measure
the thickness of anodic oxidation coatings on aluminium
Annex E (informative) - Guidance on cleaning
materials for external architectural applications
Annex F (informative) - Summary of information to be
supplied by the customer to the anodizer
Bibliography
Defines a method for specifying decorative and protective anodic oxidation coatings on aluminium (including aluminium-based alloys).
DevelopmentNote |
Supersedes I.S. EN 12373-1. (07/2010)
|
DocumentType |
Standard
|
Pages |
38
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Supersedes |
Standards | Relationship |
ISO 7599:2010 | Identical |
EN ISO 7599:2018 | Identical |
ISO 7599:2018 | Identical |
ISO 3210:2017 | Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) |
ISO 8993:2010 | Anodizing of aluminium and its alloys Rating system for the evaluation of pitting corrosion Chart method |
ISO 10215:2010 | Anodizing of aluminium and its alloys Visual determination of image clarity of anodic oxidation coatings Chart scale method |
ISO 7759:2010 | Anodizing of aluminium and its alloys — Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer |
ISO 3211:2010 | Anodizing of aluminium and its alloys Assessment of resistance of anodic oxidation coatings to cracking by deformation |
ISO 7668:2010 | Anodizing of aluminium and its alloys Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees |
ISO 2106:2011 | Anodizing of aluminium and its alloys Determination of mass per unit area (surface density) of anodic oxidation coatings Gravimetric method |
ISO 9220:1988 | Metallic coatings Measurement of coating thickness Scanning electron microscope method |
ISO 8994:2011 | Anodizing of aluminium and its alloys Rating system for the evaluation of pitting corrosion Grid method |
ISO 10074:2010 | Anodizing of aluminium and its alloys Specification for hard anodic oxidation coatings on aluminium and its alloys |
ISO 8251:2011 | Anodizing of aluminium and its alloys Measurement of abrasion resistance of anodic oxidation coatings |
ISO 2376:2010 | Anodizing of aluminium and its alloys Determination of electric breakdown potential |
ISO 1463:2003 | Metallic and oxide coatings Measurement of coating thickness Microscopical method |
ISO 2128:2010 | Anodizing of aluminium and its alloys — Determination of thickness of anodic oxidation coatings — Non-destructive measurement by split-beam microscope |
ISO 10216:2017 | Anodizing of aluminium and its alloys — Instrumental determination of image clarity of anodic oxidation coatings — Instrumental method |
ISO 2143:2017 | Anodizing of aluminium and its alloys — Estimation of loss of absorptive power of anodic oxidation coatings after sealing — Dye-spot test with prior acid treatment |
ISO 7583:2013 | Anodizing of aluminium and its alloys — Terms and definitions |
ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
ISO 2085:2010 | Anodizing of aluminium and its alloys Check for continuity of thin anodic oxidation coatings Copper sulfate test |
ISO 6719:2010 | Anodizing of aluminium and its alloys — Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments |
ISO 2931:2010 | Anodizing of aluminium and its alloys Assessment of quality of sealed anodic oxidation coatings by measurement of admittance |
ISO 6581:2010 | Anodizing of aluminium and its alloys Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings |
ISO 2107:2007 | Aluminium and aluminium alloys — Wrought products — Temper designations |
ISO 2135:2017 | Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.