ICC IPC Code and Commentary : 2018
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
IPC® Code and Commentary
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2018
Publisher
Superseded date
03-02-2025
Superseded by
€116.67
Excluding VAT
The provisions of this code shall apply to the erection, installation, alteration, repairs, relocation, replacement, addition to, use or maintenance of plumbing systems within this jurisdiction.
| DocumentType |
Standard
|
| ISBN |
978-1-60983-774-7
|
| Pages |
630
|
| ProductNote |
THIS STANDARD ALSO REFERS TO ASSE 1002—2015/ASME A112.1002—2015/CSA B125.12—15,ASSE 1016—2017/ASME A112.1016—2017/CSA B125.16—2017,ASSE 1037—2015/ASME A112.1037—2015/CSA B125.37,ASSE 1070—2015/ASME A112.1070—2015/CSA B125.1070—15,ASPE 45-2013,ASSE 5013-2015,ASSE 5015-2015,ASSE 5020-2015,ASSE 5047-2015,ASSE 5048-2015,ASSE 5052-1998,ASSE 5056-2015,CISPI 301-12,CISPI 310-12,CSA A257.1M—14,CSA A257.2M—14,CSA A257.3M—14,ASSE 1070—2015/ASME A112.1070—2015/CSA B125.1070—2015,CSA B137.1—16,B137.2—16,B137.3—16,B137.5—16,B137.6—16,B137.9—16,B137.10—16,B137.11—16,B137.18—13,B181.1—15,B181.2—15,B181.3—15,B182.4—15,B182.6—15,B182.8—15,B481.1—12,B481.3—12,IEBC—18: International Existing Building Code,IECC—18: International Energy Conservation Code,IFGC—18: International Fuel Gas Code,ANSI/ISEA Z358.1—2014,ANSI/NGWA 01-14,PDI G101 (2012),PDI G102 (2009),PSAI/ANSI Z4.3—16,
|
| PublisherName |
International Code Council (ICC)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM B 88 : 2014 | Standard Specification for Seamless Copper Water Tube |
| ASTM C 700 : 2013 | Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated |
| ASTM F 877 : 2011 : REV A | Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems |
| ASTM F 2389 : 2015 | Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems |
| ASTM B 43 : 2015 | Standard Specification for Seamless Red Brass Pipe, Standard Sizes |
| CSA B64.7 : 2011 | VACUUM BREAKERS, LABORATORY FAUCET TYPE (LFVB) |
| ASTM A 888 : 2015 | Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications |
| ASME A112.1.3 : 2000 : R2015 | AIR GAP FITTINGS FOR USE WITH PLUMBING FIXTURES, APPLIANCES, AND APPURTENANCES |
| ASTM D 2949 : 2010 | Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings |
| ASTM F 2098 : 2008 | Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings |
| ASTM F 437 : 2015 | Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 |
| ICC IPSDC International PVT. Sewage Disposal Code : 2018 | International Private Sewage Disposal Code |
| ASTM C 1053 : 2000 : R2010 | Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications |
| ASTM B 813 : 2010 | Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube |
| ASTM F 477 : 2014 | Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
| ASTM D 3138 : 2004 : R2011 | Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components |
| ASTM F 2736 : 2013 : EDT 1 | Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe (Withdrawn 2018) |
| ASTM F 714 : 2013 | Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter |
| ASTM F 876 : 2015 : REV A | Standard Specification for Crosslinked Polyethylene (PEX) Tubing |
| NSF 50 : 2015 | EQUIPMENT FOR SWIMMING POOLS, SPAS, HOT TUBS AND OTHER RECREATIONAL WATER FACILITIES |
| ASTM C 1173 : 2010 : R2014 | Standard Specification for Flexible Transition Couplings for Underground Piping Systems |
| ASTM F 891 : 2010 | Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core |
| CSA B64.4 : 2011 | BACKFLOW PREVENTERS, REDUCED PRESSURE PRINCIPLE TYPE (RP) |
| ASME B16.26 : 2013 | CAST COPPER ALLOY FITTINGS FOR FLARED COPPER TUBES |
| ASTM C 564 : 2014 | Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings |
| ASTM C 14 : 2015 : REV A | Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe |
| AWWA C151/A21.51 : 2009 | DUCTILE-IRON PIPE, CENTRIFUGALLY CAST |
| ASTM F 2159 : 2014 | Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing |
| CSA B64.3 : 2011 | BACKFLOW PREVENTERS, DUAL CHECK VALVE TYPE WITH ATMOSPHERIC PORT (DCAP) |
| ASME A112.6.9 : 2005 : R2015 | SIPHONIC ROOF DRAINS |
| ASTM C 4 : 2004 : R2014 | Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile |
| ASTM F 2262 : 2009 | Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9 (Withdrawn 2018) |
| AWWA C504 : 2010 | RUBBER-SEATED BUTTERFLY VALVES |
| ASME A112.4.3 : 1999 : R2010 | PLASTIC FITTINGS FOR CONNECTING WATER CLOSETS TO THE SANITARY DRAINAGE SYSTEM |
| ASME A112.18.2 : 2015 | PLUMBING WASTE FITTINGS |
| ASTM C 1277 : 2015 | Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings |
| ASTM F 2769 : 2014 | Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems |
| ASTM F 441/F441M : 2015 | Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 |
| ASTM D 3035 : 2015 | Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter |
| ASTM C 76 : 2015 : REV A | Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe |
| ASTM A 74 : 2015 | Standard Specification for Cast Iron Soil Pipe and Fittings |
| ASTM F 2855 : 2012 | Standard Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing |
| ASTM F 1281 : 2011 | Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe |
| NSF 14 : 2015 | PLASTICS PIPING SYSTEM COMPONENTS AND RELATED MATERIALS |
| ASTM D 3212 : 2007 : R2013 | Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals |
| ASTM F 1282 : 2010 | Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe |
| ASTM F 2831 : 2012 | Standard Practice for Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems |
| ASTM F 2648/F2648M : 2013 | Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications |
| NSF 359 : 2011 | VALVES FOR CROSSLINKED POLYETHYLENE (PEX) WATER DISTRIBUTION TUBING SYSTEMS |
| NSF 53 : 2015 | DRINKING WATER TREATMENT UNITS - HEALTH EFFECTS |
| ASTM B 75/B75M : 2011 | Standard Specification for Seamless Copper Tube |
| ASTM B 828 : 2002 : R2010 | Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings |
| CSA B64.1.2 : 2011 | VACUUM BREAKERS, PRESSURE TYPE (PVB) |
| ASTM F 656 : 2015 | Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings |
| ASTM F 1986 : 2001 : R2011 | Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems (Withdrawn 2020) |
| ICC A117.1 : 2009 | ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES |
| ASTM D 3261 : 2012 : EDT 1 | Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing |
| ASME A112.19.2 : 2013 | CERAMIC PLUMBING FIXTURES |
| NSF 372 : 2011 | DRINKING WATER SYSTEM COMPONENTS - LEAD CONTENT |
| ASTM B 306 : 2013 | Standard Specification for Copper Drainage Tube (DWV) |
| ASTM F 2434 : 2014 | Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing |
| ASTM D 2855 : 1996 : R2010 | Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings |
| ASTM D 4068 : 2015 | Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane |
| ASTM A 778/A778M : 2015 | Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products |
| ASTM F 1974 : 2009 : R2015 | Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe |
| ASTM A 53/A53M : 2012 | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
| ASTM B 302 : 2012 | Standard Specification for Threadless Copper Pipe, Standard Sizes |
| ASTM F 409 : 2012 | Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings |
| NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
| ASTM B 32 : 2008 : R2014 | Standard Specification for Solder Metal |
| ASTM D 4551 : 2012 | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane |
| ASTM F 442/F442M : 2013 : EDT 1 | Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR) |
| AWWA C901 : 2017 | POLYETHYLENE (PE) PRESSURE PIPE AND TUBING, 3/4 IN. (19 MM) THROUGH 3 IN. (76 MM), FOR WATER SERVICE |
| ASTM B 447 : 2012 : REV A | Standard Specification for Welded Copper Tube |
| NSF 58 : 2015 | REVERSE OSMOSIS DRINKING WATER TREATMENT SYSTEMS |
| ASTM B 152/B152M : 2013 | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar |
| NFPA 99 : 2018 | HEALTH CARE FACILITIES CODE |
| ASTM F 667 : 2012 | Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| AWWA C110/A21.10 : 2012 | DUCTILE-IRON AND GRAY-IRON FITTINGS |
| ASME B16.34 : 2013 | VALVES - FLANGED, THREADED, AND WELDING END |
| NFPA 51 : 2018 | DESIGN AND INSTALLATION OF OXYGEN-FUEL GAS SYSTEMS FOR WELDING, CUTTING, AND ALLIED PROCESSES |
| ASTM F 1807 : 2015 | Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing |
| ASTM F 2764/F2764M : 2011 : REV A : EDT 2 | Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications |
| ASTM A 733 : 2015 | Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples |
| ASTM D 2846/D2846M : 2014 | Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems |
| ASME A112.4.2 : 2015 | PERSONAL HYGIENE DEVICES FOR WATER CLOSETS |
| ASTM F 493 : 2014 | Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings |
| ASTM F 1970 : 2012 : EDT 1 | Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems |
| AWWA C510 : 2007 | DOUBLE CHECK-VALVE BACKFLOW PREVENTION ASSEMBLY |
| ASTM F 1055 : 2013 | Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing |
| ASTM C 1440 : 2008 : R2013 | Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems |
| CSA B64.2.2 : 2011 | VACUUM BREAKERS, HOSE CONNECTION TYPE (HCVB) WITH AUTOMATIC DRAINING FEATURE |
| ASME A112.18.1 : 2018/CSA B125.1 : 2018 | Plumbing supply fittings |
| ASTM F 405 : 2005 | Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings |
| ASTM D 3034 : 2014 : REV A | Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings |
| ASTM F 2306/F2306M : 2014 : EDT 1 | Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications |
| ASTM F 439 : 2013 | Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 |
| ASTM D 3139 : 1998 : R2011 | Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals |
| ASTM F 1960 : 2015 | Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing |
| ASME A112.6.7 : 2010 : R2015 | SANITARY FLOOR SINKS |
| ASTM B 42 : 2015 : REV A | Standard Specification for Seamless Copper Pipe, Standard Sizes |
| ASTM C 425 : 2004 : R2013 | Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings |
| ASME A112.19.7-2012/CSA B45.10-12 (R2017) | Hydromassage bathtub systems |
| ASTM B 251 : 2010 | Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube |
| ASTM E 2635 : 2014 | Standard Practice for Water Conservation in Buildings Through In-Situ Water Reclamation |
| NSF 184 : 2014 | RESIDENTIAL DISHWASHERS |
| ASTM F 438 : 2015 | Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 |
| ASTM B 687 : 1999 : R2011 | Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples |
| ASTM F 1476 : 2007 : R2013 | Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications |
| ASTM F 628 : 2012 : EDT 1 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core |
| ASME A112.6.4 : 2003 : R2012 | ROOF, DECK, AND BALCONY DRAINS |
| ASTM E 2727 : 2010 : EDT 1 | Standard Practice for Assessment of Rainwater Quality |
| ASTM F 1412 : 2009 | Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems |
| ASTM A 312/A312M : 2015 : REV A | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| AWWA C651 : 2014 | DISINFECTING WATER MAINS |
| CSA B64.4.1 : 2011 | BACKFLOW PREVENTERS, REDUCED PRESSURE PRINCIPLE TYPE FOR FIRE SYSTEMS (RPF) |
| ASTM F 1548 : 2001 : R2012 | Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.