IEC 60038:2009

Current

Current The latest, up-to-date edition.

IEC standard voltages

Available format(s): Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

Language(s): English - French, Spanish, Castilian

Published date: 17-06-2009

Publisher: International Electrotechnical Committee

Abstract - (Show below) - (Hide below)

IEC 60038:2009 specifies standard voltage values which are intended to serve as preferential values for the nominal voltage of electrical supply systems, and as reference values for equipment and system design. This seventh edition supersedes the sixth edition (1993), its Amendment 1 (1994) and its Amendment 2 (1997). It constitutes a technical revision. The significant technical changes are:

- the addition of the values of 230 V (50 Hz) and 230/400 V (60 Hz) to Table 1;

- the replacement of the utilization voltage range at LV by a reference to the relevant standard and an informative annex;

- the addition of the value of 30 kV to Table 3;

- the replacement of the value of 1 050 kV by 1 100 kV in Table 5.

It has the status of a horizontal standard in accordance with IEC Guide 108

General Product Information - (Show below) - (Hide below)

Committee	TC 8
Development Note	Stability date: 2018. (09/2017)
Document Type	Standard
ISBN
Pages
Published
Publisher	International Electrotechnical Committee
Status	Current
Supersedes	IEC 60038:1983/AMD1:1994 IEC 60038:1983+AMD1:1994+AMD2:1997 CSV IEC 60038:1983/AMD2:1997 IEC 60038:1983

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NBN EN 60038 : 2011	Identical
DIN EN 60038 : 2012	Identical
NEN IEC 60038 : 2009	Identical
VDE 0175-1 : 2012	Identical
BS EN 60038:2011	Identical
EN 60038 : 2011	Identical
DIN IEC 60038 : 2002	Similar to
NEN 10038 : 1989	Similar to
HD 472 S1:1989/AC:2013	Identical
PN IEC 60038 : 1999	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

IEEE C57.12.10-2010 REDLINE	IEEE Standard Requirements for Liquid-Immersed Power Transformers
I.S. EN 12098-5:2017	ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 5: START-STOP SCHEDULERS FOR HEATING SYSTEMS - MODULES M3-5, 6, 7, 8
ISO 10054:1998	Internal combustion compression-ignition engines Measurement apparatus for smoke from engines operating under steady-state conditions Filter-type smokemeter
05/30134681 DC : DRAFT JUNE 2005	IEC 60364-7-708 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-708: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - CARAVANS PARKS, CAMPING PARKS AND SIMILAR LOCATIONS
CEI EN 60027-7 : 2011	LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 7: POWER GENERATION, TRANSMISSION AND DISTRIBUTION
12/30240603 DC : 0	BS EN 60320-1 ED 3.0 - APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS
03/320323 DC : DRAFT DEC 2003
14/30298051 DC : 0	BS EN 61069-1 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 1: TERMINOLOGY AND BASIC CONCEPTS
IEC TS 62786:2017	Distributed energy resources connection with the grid
DD CLC/TS 50535:2010	Railway applications. Onboard auxiliary power converter systems
14/30295243 DC : 0	BS EN 62909-1 ED 1.0 - BI-DIRECTIONAL GRID CONNECTED POWER CONVERTERS - PART 1: GENERAL REQUIREMENTS
I.S. EN 61000-4-25:2002	ELECTROMAGNETIC COMPATIBILITY (EMC) - TESTING AND MEASUREMENT TECHNIQUES - HEMP IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS (IEC 61000-4-25:2001 (EQV))
BS EN 50482:2008	Instrument transformers. Three-phase inductive voltage transformers having Um up to 52kV
BS EN 61606-1:2009	Audio and audiovisual equipment. Digital audio parts. Basic measurement methods of audio characteristics General
DIN V ENV 61400-1 : 1996	WIND TURBINE GENERATOR SYSTEMS - PART 1: SAFETY REQUIREMENTS
14/30300746 DC : 0	BS EN 60358-4 ED 1.0 - COUPLING CAPACITORS AND CAPACITOR DIVIDERS - PART 4: AC AND DC SINGLE-PHASE CAPACITOR-DIVIDER AND RC-DIVIDER
BS EN 62022:2007	Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles
BS 8431:2010	Electrical static meters for secondary metering and sub-metering. Specification
00/715261 DC : DRAFT DEC 2000	IEC 60325 - ALPHA, BETA AND ALPHA-BETA CONTAMINATION METERS AND MONITORS
CEI EN 50065-4-1 : 2002	SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 4-1: LOW-VOLTAGE DECOUPLING FILTERS - GENERIC SPECIFICATION
I.S. EN 12098-2:2001	CONTROLS FOR HEATING SYSTEMS - PART 2: OPTIMUM START-STOP CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS
IEC 61017:2016	Radiation protection instrumentation - Transportable, mobile or installed equipment to measure photon radiation for environmental monitoring
BS IEC 62855:2016	Nuclear power plants. Electrical power systems. Electrical power systems analysis
BS EN 61869-1:2009	Instrument transformers General requirements
00/244020 DC : DRAFT SEP 2000	IEC 61800-3 ED.2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS PRODUCT STANDARD INCLUDING SPECIFIC TEST METHODS
DIN EN 15500 E : 2008	CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT
BS 6288-3:1982	Magnetic tape sound recording and reproducing systems Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape
I.S. EN 12098-4:2005	CONTROLS FOR HEATING SYSTEMS - PART 4: OPTIMUM START-STOP CONTROL EQUIPMENT FOR ELECTRICAL SYSTEMS
BS IEC 62463:2010	Radiation protection instrumentation. X-ray systems for the screening of persons for security and the carrying of illicit items
12/30258455 DC : 0	FPREN 60065:2011+FPRAA - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
AHRI 580 : 2001	PERFORMANCE RATING OF NON - CONDENSABLE GAS PURGE EQUIPMENT FOR USE WITH LOW PRESSURE CENTRIFUGAL LIQUID CHILLERS
IEC TR 60909-2:2008	Short-circuit currents in three-phase a.c. systems - Part 2: Data of electrical equipment for short-circuit current calculations
I.S. HD 384-7-708:2005	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SECTION 708: ELECTRICAL INSTALLATIONS IN CARAVAN PARKS
BS EN 50588-1:2017	Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV General requirements
07/30143023 DC : DRAFT MAR 2007	BS 7835 - ELECTRIC CABLES - ARMOURED CABLES WITH THERMOSETTING INSULATION FOR RATED VOLTAGES FROM 3.8/6.6 KV TO 19/33 KV HAVING LOW EMISSION OF SMOKE AND CORROSIVE GASES WHEN AFFECTED BY FIRE - REQUIREMENTS AND TEST METHODS
BS EN 15500:2008	Control for heating, ventilating and air-conditioning applications. Electronic individual zone control equipment
17/30356403 DC : 0	BS EN 17116-3 - SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 3: CONTINUOUS TUNNEL WASHER
03/108075 DC : DRAFT JUNE 2003	IEC 62314 ED.1.0 - SOLID-STATE RELAYS
15/30331522 DC : 0	BS EN 12098-1 - CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS - MODULES M3-5, 6, 7, 8
CLC/TS 62603-1:2014	Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications
BS EN 60687:1993	Specification for alternating current static watt-hour meters for active energy (classes 0,2 S and 0,5 S)
13/30288591 DC : 0	BS EN 60974-1 - ARC WEDLING EQUIPMENT - PART 1: WELDING POWER SOURCE
S.R. HD 60364-5-534:2016	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - ISOLATION, SWITCHING AND CONTROL - CLAUSE 534: DEVICES FOR PROTECTION AGAINST TRANSIENT OVERVOLTAGES
BIS IS 15382-1 : 2014	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
09/30202852 DC : 0	BS 5733 - GENERAL REQUIREMENTS FOR ELECTRICAL ACCESSORIES - SPECIFICATION
BS 6840-7(1996) : 1996	SOUND SYSTEM EQUIPMENT - PART 7: HEADPHONES AND EARPHONES
13/30294866 DC : 0	BS EN 61058-1 - SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
I.S. EN 61810-1:2015	ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS
BS EN 61400-1 : 2005	WIND TURBINES - PART 1: DESIGN REQUIREMENTS
09/30214359 DC : 0	BS EN 50533 - RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
BS EN 45510-2-7:2002	Guide for the procurement of power station equipment. Electrical equipment Switchgear and controlgear
11/30233201 DC : 0	BS EN 61009-1 - RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES
I.S. EN 50125-3:2003	RAILWAY APPLICATION - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 3: EQUIPMENT FOR SIGNALLING AND TELECOMMUNICATIONS
BS EN 62484:2015	Radiation protection instrumentation. Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material
BS 5817-4:1983	Audio-visual, video and television equipment and systems Recommendations for preferred matching values for the interconnection of equipment in a system
05/30135633 DC : DRAFT JUN 2005	IEC 60269-1 ED 4 - LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS
02/207105 DC : DRAFT JUN 2002	IEC 61606-1. ED.1 - AUDIO AND AUDIOVISUAL EQUIPMENT - DIGITAL AUDIO PARTS - BASIC MEASUREMENT METHODS OF AUDIO CHARACTERISTICS - PART 1: GENERAL
03/306274 DC : 0
BS EN 61822:2009	Electrical installations for lighting and beaconing of aerodromes. Constant current regulators
BS EN 50065-4-1:2002	Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Low voltage decoupling filters Generic specification
13/30267662 DC : 0	BS EN ISO 17409 - ELECTRICALLY PROPELLED ROAD VEHICLES - CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY - SAFETY REQUIREMENTS
BS EN 61036:1997	Alternating current static watt-hour meters for active energy (classes 1 and 2)
BS EN 61000-2-12:2003	Electromagnetic compatibility (EMC). Environment Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems
HD 60364-7-708:2017	Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations
15/30331510 DC : 0	BS EN 12098-3 - CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS - MODULES M3-5, 6, 7, 8
I.S. CLC TR 50422:2005	GUIDE FOR THE APPLICATION OF THE EUROPEAN STANDARD EN 50160
BS EN 50533 : 2011	RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
08/30173482 DC : DRAFT JUNE 2008	BS EN 61606-1 - AUDIO AND AUDIOVISUAL EQUIPMENT - DIGITAL AUDIO PARTS - BASIC MEASUREMENT METHODS OF AUDIO CHARACTERISTICS - PART 1: GENERAL
BS EN 61096:1993	Methods of measuring the characteristics of reproducing equipment for digital audio compact discs
BS EN 60601-1-12:2015	Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment
BS IEC 60532:2010	Radiation protection instrumentation. Installed dose rate meters, warning assemblies and monitors. X and gamma radiation of energy between 50 keV and 7 MeV
IEC TR 61000-2-1:1990	Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Description of the environment - Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems
07/30150067 DC : 0	BS IEC 60846-1 - RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION - PART 1: PORTABLE WORKPLACE AND ENVIRONMENTAL METERS AND MONITORS
18/30368743 DC (published 2018-04)	BS EN 60947-6-2. Low-voltage switchgear and controlgear Part 6-2. Multiple function equipment. Control and protective switching devices (or equipment) (CPS)
CEI EN 61606-1 : 2011	AUDIO AND AUDIOVISUAL EQUIPMENT - DIGITAL AUDIO PARTS - BASIC MEASUREMENT METHODS OF AUDIO CHARACTERISTICS - PART 1: GENERAL
04/30115650 DC : DRAFT JUNE 2004	IEC 60364-7-720 ED 1 - ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-720: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - CARAVAN PARKS, CAMPING PARKS, MARINAS AND SIMILAR LOCATIONS
DIN IEC 60038 Beiblatt 1:1992-12
CEI EN 61534-1 : 2012	POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS
13/30281408 DC : 0	BS EN 61869-10 - INSTRUMENT TRANSFORMERS - PART 10: ADDITIONAL REQUIREMENTS FOR LOW-POWER, STAND-ALONE CURRENT SENSORS
PD IEC/TR 63042-100:2016	UHV AC transmission systems General information
14/30269872 DC : 0	BS EN 61017 ED 1.0 - RADIATION PROTECTION INSTRUMENTATION - TRANSPORTABLE, MOBILE OR INSTALLED EQUIPMENT TO MEASURE PHOTON RADIATION FOR ENVIRONMENTAL MONITORING
AHRI 610 : 2004	PERFORMANCE RATING OF CENTRAL SYSTEM HUMIDIFIERS
17/30309558 DC : 0	BS IEC 60772 ED 2.0 - NUCLEAR POWER PLANTS - INSTRUMENTATION SYSTEMS IMPORTANT TO SAFETY - ELECTRICAL PENETRATION ASSEMBLIES IN CONTAINMENT STRUCTURES
NF EN 62020 : 1999 AMD 1 2005	ELECTRICAL ACCESSORIES - RESIDUAL CURRENT MONITORS FOR HOUSEHOLD AND SIMILAR USES (RCMS)
NF EN 62271-1 : 2017	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
08/30183041 DC : DRAFT MAY 2008	BS EN 61000-3-12 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW VOLTAGE SYSTEMS WITH INPUT CURRENT $OG 16 A AND <= 75 A PER PHASE
BS EN 61606-4:2006	Audio and audiovisual equipment. Digital audio parts. Basic measurement methods of audio characteristics Personal computer
DD IEC/TS 60815-1:2008	Selection and dimensioning of high-voltage insulators intended for use in polluted conditions Definitions, information and general principles
98/202856 DC : 0	PREN 60044-1 - INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS
IEC 60898-1:2015	Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation
CSA C60044-5:2007	INSTRUMENT TRANSFORMERS - PART 5: CAPACITOR VOLTAGE TRANSFORMERS
UNE-EN 61534-1:2011	Powertrack systems -- Part 1: General requirements
BS EN 62271-203:2012	High-voltage switchgear and controlgear Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
CEI EN 50512 : 2014	ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS)
CSA CEI/IEC 61000.2.4 : 2004	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-4: ENVIRONMENT - COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES
BS EN 60871-1:2014	Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V General
CSA C22.4 No. 1 : 2009(R2018)	OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE
IEC 60884-2-5:2017	Plugs and socket-outlets for household and similar purposes - Part 2-5: Particular requirements for adaptors
BS EN 50341-2-4:2016	Overhead electrical lines exceeding AC 1 kV National Normative Aspects (NNA) for Germany (based on EN 50341-1:2012)
CEI 18-52 : 2013	ELECTRICAL INSTALLATIONS IN SHIPS - PART 354: SINGLE- AND THREE-CORE POWER CABLES WITH EXTRUDED SOLID INSULATION FOR RATED VOLTAGES 6 KV (U[M] = 7,2 KV) UP TO 30 KV (U[M] = 36 KV)
CSA C60044-5 : 2007 : R2011	INSTRUMENT TRANSFORMERS - PART 5: CAPACITOR VOLTAGE TRANSFORMERS
ANSI/PIMA IT7.406:1997	AUDIOVISUAL SYSTEMS - SOUND SYSTEM EQUIPMENT - PART 7: HEADPHONES AND EARPHONES
ARI 1010 : 2002	SELF-CONTAINED, MECHANICALLY REFRIGERATED DRINKING-WATER COOLERS
IEC 61225:2005	Nuclear power plants - Instrumentation and control systems important to safety - Requirements for electrical supplies
S.R. HD 60364-5-557:2013	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-557: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - AUXILIARY CIRCUITS
IEC 61851-21:2001	Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c./d.c. supply
IEC 60364-5-53:2001+AMD1:2002+AMD2:2015 CSV	Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control
CEI EN 61000-3-12 : 2012	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW-VOLTAGE SYSTEMS WITH INPUT CURRENT > 16 A AND <= 75 A PER PHASE
CAN/CSA-C22.2 NO. 80601-2-72:17	Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (Adopted ISO 80601-2-72:2015, first edition, 2015-09-01, with Canadian deviations)
CSA C60044-8 : 2007 : R2016	INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
IEC TR 62655:2013	Tutorial and application guide for high-voltage fuses
AHRI 310/380-2017/CSA C744-17	Packaged terminal air conditioners and heat pumps (Binational standard with AHRI 310/380)
EN 61800-9-2:2017	Adjustable speed electrical power drive systems - Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Energy efficiency indicators for power drive systems and motor starters
CEI EN 60761-1 : 2005	EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 1: GENERAL REQUIREMENTS
I.S. EN 60694:1999	COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
I.S. EN IEC 62933-2-1:2018	ELECTRICAL ENERGY STORAGE (EES) SYSTEMS - PART 2-1: UNIT PARAMETERS AND TESTING METHODS - GENERAL SPECIFICATION
EN 62488-2:2017	Power line communication systems for power utility applications - Part 2: Analogue power line carrier terminals or APLC
I.S. EN 60269-1:2007	LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS
CSA C61400-1 : 2014	WIND TURBINES - PART 1: DESIGN REQUIREMENTS
EN 62271-1:2017	High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
I.S. EN 61347-1:2015	LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS
BS EN 50341-1:2012	Overhead electrical lines exceeding AC 1 kV General requirements. Common specifications
AHRI 560 : 2000	ABSORPTION WATER CHILLING AND WATER HEATING PACKAGES
I.S. EN 61557-1:2007	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 1: GENERAL REQUIREMENTS
AHAM AC2 : 2006	METHOD FOR SOUND TESTING OF PORTABLE HOUSEHOLD ELECTRIC ROOM AIR CLEANERS STANDARD
CEI 36-41 : 2011	SELECTION AND DIMENSIONING OF HIGH-VOLTAGE INSULATORS INTENDED FOR USE IN POLLUTED CONDITIONS - PART 1: DEFINITIONS, INFORMATION AND GENERAL PRINCIPLES
BS EN 62040-3:2011	Uninterruptible power systems (UPS) Method of specifying the performance and test requirements
I.S. EN 62244:2011	RADIATION PROTECTION INSTRUMENTATION - INSTALLED RADIATION MONITORS FOR THE DETECTION OF RADIOACTIVE AND SPECIAL NUCLEAR MATERIALS AT NATIONAL BORDERS
IEC 60669-1 REDLINE : 4ED 2017	SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
CSA C61869-1 : 2014	INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
I.S. EN 61293:1995	MARKING OF ELECTRICAL EQUIPMENT WITH RATINGS RELATED TO ELECTRICAL SUPPLY - SAFETY REQUIREMENTS (IEC 1293:1994)
CEI EN 61557-1 : 2008	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 1: GENERAL REQUIREMENTS
I.S. EN 62488-2:2017	POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC
S.R. HD 60364-7-709:2009	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-709: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MARINAS AND SIMILAR LOCATIONS
NF EN 61557-1 : 2007	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 61058.1 : 2009 : R2014	SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
BS EN 62271-209:2007	High-voltage switchgear and controlgear Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV. Fluid-filled and extruded insulation cables. Fluid-filled and dry-type cable-terminations
I.S. EN 60495:1994	SINGLE SIDEBAND POWER-LINE CARRIER TERMINALS
NF EN 61851-21 : 2002	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21: ELECTRIC VEHICLE REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN A.C./D.C. SUPPLY
CEI EN 62693 : 2014	INDUSTRIAL ELECTROHEATING INSTALLATIONS - TEST METHODS FOR INFRARED ELECTROHEATING INSTALLATIONS
CSA C22.2 No. 61980-1 : 2016	ELECTRIC VEHICLE WIRELESS POWER TRANSFER (WPT) SYSTEMS - PART 1: GENERAL REQUIREMENTS
IEC 62244:2006	Radiation protection instrumentation - Installed radiation monitors for the detection of radioactive and special nuclear materials at national borders
I.S. EN 61000-2-12:2003	ELECTROMAGNETIC COMPATIBILITY (EMC) - ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC MEDIUM-VOLTAGE POWER SUPPLY SYSTEMS
I.S. EN 50512:2009	ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS)
IEC 60364-5-55:2011+AMD1:2012+AMD2:2016 CSV	Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment - Other equipment
IEC 61851-1:2017	Electric vehicle conductive charging system - Part 1: General requirements
IEC TR 60909-1:2002	Short-circuit currents in three-phase a.c. systems - Part 1: Factors for the calculation of short-circuit currents according to IEC 60909-0
IEC 60055-1:1997+AMD1:2005 CSV	Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories
BS 3535-1:1990	Isolating transformers and safety isolating transformers General requirements
BS EN 61558-1 : 2005	SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
BS EN 61851-21:2002	Electric vehicle conductive charging system Electric vehicle requirements for conductive connection to an a.c./d.c. supply
BS EN 12157:1999	Rotodynamic pumps. Coolant pump units for machine tools. Nominal flow rate, dimensions
06/30154990 DC : 0	BS EN 60204-32 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
BS EN 61347-1:2015	Lamp controlgear General and safety requirements
UNE-EN 61140:2017	Protection against electric shock - Common aspects for installation and equipment
UNE-EN 62271-203:2013	High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
IEC 60439-1:1999+AMD1:2004 CSV	Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
15/30286010 DC : 0	BS ISO 14990-1 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
13/30238229 DC : 0	BS EN 62052-31 - ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TEST AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS
IEC 60694:1996+AMD1:2000+AMD2:2001 CSV	Common specifications for high-voltage switchgear and controlgear standards
IEC 60687:1992	Alternating current static watt-hour meters for active energy (classes 0,2 S and 0,5 S)
CEI EN 61800-1 : 2000	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 1: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS
EN 61347-1:2015	Lamp controlgear - Part 1: General and safety requirements
EN 62052-31:2016	Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests
DIN ISO 3538:2003-07	ROAD VEHICLES - SAFETY GLAZING MATERIALS - TEST METHODS FOR OPTICAL PROPERTIES
EN 61000-2-4:2002/AC:2014	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-4: ENVIRONMENT - COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES
EN 60269-1:2007/A2:2014	LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS (IEC 60269-1:2006/A2:2014)
EN 61268:1996	Alternating current static var-hour meters for reactive energy (classes 2 and 3)
EN 62693:2013	Industrial electroheating installations - Test methods for infrared electroheating installations
EN 12098-4 : 2005	CONTROLS FOR HEATING SYSTEMS - PART 4: OPTIMUM START-STOP CONTROL EQUIPMENT FOR ELECTRICAL SYSTEMS
CLC/TS 50458 : 2006	Capacitance graded outdoor bushing 52 kV up to 420 kV for oil immersed transformers
EN 61058-1:2002/A2:2008	SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
EN 62271-209:2007	High-voltage switchgear and controlgear - Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled and dry-type cable-terminations
EN 61869-4:2014/AC:2014	INSTRUMENT TRANSFORMERS - PART 4: ADDITIONAL REQUIREMENTS FOR COMBINED TRANSFORMERS (IEC 61869-4:2013)
EN 60909-0:2016	Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents
EN 61293:1994	Marking of electrical equipment with ratings related to electrical supply - Safety requirements
EN 61400-2:2014	Wind turbines - Part 2: Small wind turbines
EN 60694:1996/A2:2001	COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
EN 61606-4 : 2006	AUDIO AND AUDIOVISUAL EQUIPMENT - DIGITAL AUDIO PARTS - BASIC MEASUREMENT METHODS OF AUDIO CHARACTERISTICS - PART 4: PERSONAL COMPUTER
EN 61558-1:2005/A1:2009	SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
HD 384.7.708 : 2005	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SECTION 708: ELECTRICAL INSTALLATIONS IN CARAVAN PARKS
DIN VDE 0641-11 : 1992	CIRCUIT-BREAKERS FOR OVER CURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS
EN 60704-1:2010/A11:2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE NOISE - PART 1: GENERAL REQUIREMENTS (IEC 60704-1:2010)
EN 60071-1:2006/A1:2010	INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES
IEC 61938:2018	Multimedia systems - Guide to the recommended characteristics of analogue interfaces to achieve interoperability (GMT)
EN 61000-3-12:2011	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW-VOLTAGE SYSTEMS WITH INPUT CURRENT > 16 A AND <= 75 A PER PHASE (IEC 61000-3-12:2011)
BS 7671(2008) : 2018	REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS
EN 50125-3 : 2003 COR 2010	RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 3: EQUIPMENT FOR SIGNALLING AND TELECOMMUNICATIONS
EN 61599:1999	Videodisk players - Methods of measurement
EN 12157:1999	Rotodynamic pumps - Coolant pumps units for machine tools - Nominal flow rate, dimensions
HD 384.4.41 S2:1996/A1:2002	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 4: PROTECTION FOR SAFETY - CHAPTER 41: PROTECTION AGAINST ELECTRIC SHOCK
EN 60730-1:2016	Automatic electrical controls - Part 1: General requirements
EN 60034-30-1:2014	Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code)
EN 62484:2015	Radiation protection instrumentation - Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material
HD 60364-5-534:2016	Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control - Clause 534: Devices for protection against transient overvoltages
EN 60687:1992/corrigendum:1993	ALTERNATING CURRENT STATIC WATT HOUR METERS FOR ACTIVE ENERGY (CLASSES 0.2S AND 0.5S)
EN 61131-2:2007	Programmable controllers - Part 2: Equipment requirements and tests
EN 61869-3 : 2011	INSTRUMENT TRANSFORMERS - PART 3: ADDITIONAL REQUIREMENTS FOR INDUCTIVE VOLTAGE TRANSFORMERS (IEC 61869-3:2011)
EN 61851-1:2011	Electric vehicle conductive charging system - Part 1: General requirements
CEI 18-64 : 2008	MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 4: CABLES
HD 538.1 S1:1992/AC:2011	THREE-PHASE DRY-TYPE DISTRIBUTION TRANSFORMERS 50 HZ, FROM 100 TO 2500 KVA, WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 1: GENERAL REQUIREMENTS AND REQUIREMENTS FOR TRANSFORMERS WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 24 KV
EN 62606:2013/A1:2017	GENERAL REQUIREMENTS FOR ARC FAULT DETECTION DEVICES (IEC 62606:2013/A1:2017)
HD 384.7.711 : 200S1	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-711: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXHIBITIONS, SHOWS AND STANDS
EN 61822:2009	ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - CONSTANT CURRENT REGULATORS
EN 61000-2-12:2003	Electromagnetic compatibility (EMC) - Part 2-12: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems
EN 61096:1993/A1:1996	METHODS OF MEASURING THE CHARACTERISTICS OF REPRODUCING EQUIPMENT FOR DIGITAL AUDIO COMPACT DISCS
EN 61400-3:2009	Wind turbines - Part 3: Design requirements for offshore wind turbines
EN 50482:2008	Instrument transformers - Three-phase inductive voltage transformers having Um up to 52 kV
HD 60364-5-557:2013/A11:2016	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-557: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - AUXILIARY CIRCUITS
EN 60044-5:2004	Instrument transformers - Part 5: Capacitor voltage transformers
EN 61000-2-2:2002/A1:2017	ELECTROMAGNETIC COMPATIBILITY (EMC) - ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC LOW-VOLTAGE POWER SUPPLY SYSTEMS (IEC 61000-2-2:2002/A1:2017)
EN 12098-2 : 2001	CONTROLS FOR HEATING SYSTEMS - PART 2: OPTIMUM START-STOP CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS
DIN EN 15500:2008-12	CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT
EN 60495:1994	Single sideband power-line carrier terminals
NF EN 62271-209 : 2008	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 209: CABLE CONNECTIONS FOR GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES ABOVE 52 KV - FLUID-FILLED AND EXTRUDED INSULATION CABLES - FLUID-FILLED AND DRY TYPE CABLE-TERMINATIONS
EN 300 132-1 : 2.0.1 DRAFT	ENVIRONMENTAL ENGINEERING (EE); POWER SUPPLY INTERFACE AT THE INPUT TO INFORMATION AND COMMUNICATION TECHNOLOGY (ICT) EQUIPMENT; PART 1: OPERATED BY ALTERNATING CURRENT (AC) SOURCE
06/30126000 DC : DRAFT MAY 2006	IEC 60815-1 - SELECTION AND DIMENSIONING OF HIGH-VOLTAGE INSULATORS FOR POLLUTED CONDITIONS - PART 1: DEFINITIONS, INFORMATION AND GENERAL PRINCIPLES
AHRI 270 : 2008	SOUND PERFORMANCE RATING OF OUTDOOR UNITARY EQUIPMENT
NF EN 61098 : 2008	RADIATION PROTECTION INSTRUMENTATION - INSTALLED PERSONNEL SURFACE CONTAMINATION MONITORING ASSEMBLIES
03/303446 DC : DRAFT MAR 2003	IEC 60071-1 ED. 8 - INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULE
CEI EN 61000-2-4 : 2003	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-4: ENVIRONMENT - COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES
BS 7674:1993	Nuclear power plants. Instrumentation and control systems important for safety. Requirements for electrical supplies
01/207421 DC : DRAFT OCT 2001	EN 50XX - CAPACITANCE GRADED OUTDOOR BUSHINGS 52 KV TO 420 KV FOR OIL IMMERSED TRANSFORMERS
BS IEC 60325:2002	Radiation protection instrumentation. Alpha, beta and alpha/beta (beta energy > 60 keV) contamination meters and monitors
BS EN 62693:2013	Industrial electroheating installations. Test methods for infrared electroheating installations
BS EN 60861:2008	Equipment for monitoring of radionuclides in liquid effluents and surface waters
I.S. EN 50482:2008	INSTRUMENT TRANSFORMERS - THREE-PHASE INDUCTIVE VOLTAGE TRANSFORMERS HAVING U[M] UP TO 52 KV
CSA C61000.2.2 : 2004 : R2014	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-2: ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC LOW-VOLTAGE POWER SUPPLY SYSTEMS
14/30279327 DC : 0	BS EN 61800-3 AMD2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS
AHRI 350 : 2000	SOUND PERFORMANCE RATING OF NON-DUCTED INDOOR AIR-CONDITIONING AND HEAT PUMP EQUIPMENT
10/30189547 DC : 0	BS EN 62603 ED 1 - INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR EVALUATING THE PERFORMANCES OF PROCESS CONTROL SYSTEMS
BS EN 60358-1:2012	Coupling capacitors and capacitor dividers General rules
00/716717 DC : DRAFT NOV 2000
CSA C61869-5 : 2015	INSTRUMENT TRANSFORMERS - PART 5: ADDITIONAL REQUIREMENTS FOR CAPACITOR VOLTAGE TRANSFORMERS
BS EN 60044-1:1999	Instrument transformers Current transformers
BS EN 60044-5:2004	Instrument transformers Capacitor voltage transformers
08/30180966 DC : DRAFT APR 2008	BS EN 50160 - VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC DISTRIBUTION NETWORKS
12/30248232 DC : DRAFT AUG 2012	BS EN 61400-2 - WIND TURBINES - PART 2: SMALL WIND TURBINES
DIN EN ISO 17409:2016-09 (Draft)	ELECTRICALLY PROPELLED ROAD VEHICLES - CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY - SAFETY REQUIREMENTS (ISO 17409:2015, CORRECTED VERSION 2015-12-15)
07/30167174 DC : 0	BS EN 61869-2 - INSTRUMENT TRANSFORMERS - PART 2: SPECIFIC REQUIREMENT FOR CURRENT TRANSFORMERS
BS EN 61400-3:2009	Wind turbines Design requirements for offshore wind turbines
BS IEC 61363-1:1998	Electrical installations of ships and mobile and fixed offshore units Procedures for calculating short-circuit currents in three-phase a.c.
EN 61851-21-1:2017/AC:2017-11	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21-1: ELECTRIC VEHICLE ON-BOARD CHARGER EMC REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN AC/DC SUPPLY (IEC 61851-21-1:2017)
DD CEN/TS 12977-5:2010	Thermal solar systems and components. Custom built systems Performance test methods for control equipment
BS IEC 62484 : 2010	RADIATION PROTECTION INSTRUMENTATION - SPECTROSCOPY-BASED PORTAL MONITORS USED FOR THE DETECTION AND IDENTIFICATION OF ILLICIT TRAFFICKING OF RADIOACTIVE MATERIAL
NF EN 60027-7 : 2011	LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 7: POWER GENERATION, TRANSMISSION AND DISTRIBUTION
CLC/TR 50422:2013	GUIDE FOR THE APPLICATION OF THE EUROPEAN STANDARD EN 50160
BS 7395:1991	Specification for circuit-breakers for equipment (CBE)
BS IEC 60761-1 : 2002 AMD 15427	EQUIPMENT FOR CONTINUOUS MONITORING OF RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 1: GENERAL REQUIREMENTS
BS ISO 17409 : 2015	ELECTRICALLY PROPELLED ROAD VEHICLES - CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY - SAFETY REQUIREMENTS
02/203604 DC : DRAFT MAR 2002	IEC 61810-1. ED.2 - ELEMENTARY RELAYS - PART 1: SAFETY-RELATED AND GENERAL REQUIREMENTS
DIN EN ISO 80601-2-72:2016-04	Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (ISO 80601-2-72:2015)
BS EN 61810-5:1999	Electromechanical non-specified time all-or-nothing relays Insulation coordination
15/30271483 DC : 0	BS EN 61851-21-1 ED 1.0 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM PART 21-1 ELECTRIC VEHICLE ONBOARD CHARGER EMC REQUIREMENTS FOR CONDUCTIVE CONNECTION TO A.C./D.C. SUPPLY
EN 61800-2:2015	Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable speed a.c. power drive systems
BS EN 61000-4-7 : 2002	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-7: TESTING AND MEASUREMENT TECHNIQUES - GENERAL GUIDE ON HARMONICS AND INTERHARMONICS MEASUREMENTS AND INSTRUMENTATION, FOR POWER SUPPLY SYSTEMS AND EQUIPMENT CONNECTED THERETO
PD CLC/TS 62603-1:2014	Industrial process control systems. Guideline for evaluating process control systems Specifications
CEI EN 61599 : 2000	VIDEODISK PLAYERS - METHODS OF MEASUREMENT
CEI EN 50308 : 2005	WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE
I.S. HD 60364-1:2008	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: FUNDAMENTAL PRINCIPLES, ASSESSMENT OF GENERAL CHARACTERISTICS, DEFINITIONS
03/307802 DC : DRAFT MAY 2003	EN 61008-1 - RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCB'S) - PART 1: GENERAL RULES
PREN 61008-1 : DRAFT 2011	RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES
07/30167396 DC : 0	BS EN 61869-4 - INSTRUMENT TRANSFORMERS - PART 4 - SPECIFIC REQUIREMENT FOR COMBINED TRANSFORMERS
BS 7729:1994	Specification for instrument transformers. Three-phase voltage transformers for voltage levels having U_m up to 52 kV
CEI CLC/TS 50458 : 2006	CAPACITANCE GRADED OUTDOOR BUSHING 52 KV UP TO 420 KV FOR OIL IMMERSED TRANSFORMERS
PD IEC/TS 62786:2017	Distributed energy resources connection with the grid
BS EN 62314:2006	Solid-state relays
BS IEC 60768:2009	Nuclear power plants. Instrumentation important to safety. Equipment for continuous in-line or on-line monitoring of radioactivity in process streams for normal and incident conditions
NF EN 61400-2 : 2014	WIND TURBINES - PART 2: SMALL WIND TURBINES
BS EN 61800-4:2003	Adjustable speed electrical power drive systems General requirements. Rating specifications for a.c. power drive systems above 1000 V a.c. and not exceeding 35 kV
BS EN 61481-2:2014	Live working. Phase comparators Resistive type to be used for voltages from 1 kV to 36 kV a.c.
07/30127452 DC : DRAFT AUG 2007	BS ISO 13628-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS
BS EN 60325:2004	Radiation protection instrumentation. Alpha, beta and alpha/beta (beta energy > 60 keV) contamination meters and monitors
BS EN 60664-1:2007	Insulation coordination for equipment within low-voltage systems Principles, requirements and tests
BS EN 62756-1:2015	Digital load side transmission lighting control Basic requirements
11/30233197 DC : 0	BS EN 61008-1 - RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES
UNI CEI EN 45510-2-5 : 2011	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS
15/30331519 DC : 0	BS EN 15500-1 - CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5
05/30134690 DC : DRAFT JUNE 2005	IEC 60364-7-709 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-709: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MARINAS AND SIMILAR LOCATIONS
16/30329820 DC : 0	BS EN 60364-7-708 ED 3.0 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-708: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - CARAVAN PARKS; CAMPING PARKS AND SIMILAR LOCATIONS
16/30329824 DC : 0	BS EN 60364-7-721 ED 2.0 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-721: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - ELECTRICAL INSTALLATIONS IN CARAVANS AND MOTOR CARAVANS
BS EN 61869-4:2014	Instrument transformers Additional requirements for combined transformers
BS DD8431(2005) : 2005	ELECTRICAL STATIC METERS FOR SECONDARY METERING AND SUB-METERING - SPECIFICATION
04/30112722 DC : DRAFT APR 2004	IEC 60044-5 ED.1 - INSTRUMENT TRANSFORMERS - PART 5: CAPACITOR VOLTAGE TRANSFORMERS
CEI EN 62271-209 : 2009	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 209: CABLE CONNECTIONS FOR GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES ABOVE 52 KV - FLUID-FILLED AND EXTRUDED INSULATION CABLES - FLUID-FILLED AND DRY-TYPE CABLE-TERMINATIONS
BS EN 61606:1997	Audio and audiovisual equipment. Digital audio parts. Basic methods of measurement of audio characteristics
AHRI 1230 : 2010 ADD 2 2014	PERFORMANCE RATING OF VARIABLE REFRIGERANT FLOW (VRF) MULTI-SPLIT AIR-CONDITIONING AND HEAT PUMP EQUIPMENT
CEI EN 61851-22 : 2003	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 22: AC ELECTRIC VEHICLE CHARGING STATION
CEI EN 60664-1 : 2008	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
API SPEC 17E : 2017	SPECIFICATION FOR SUBSEA UMBILICALS
CEI EN 62488-2 : 1ED 2018	POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC
IEC TS 62898-1:2017	Microgrids - Part 1: Guidelines for microgrid projects planning and specification
BS EN IEC 63044-3:2018	Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Electrical safety requirements
04/30125174 DC : DRAFT NOV 2004	IEC 61557-1 ED2 - ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. V D.C. EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 1: GENERAL REQUIREMENTS
I.S. HD 384-7-754:2005	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SECTION 754: ELECTRICAL INSTALLATIONS IN CARAVANS AND MOTOR-CARAVANS
06/30143016 DC : DRAFT SEP 2006	BS 6622 - SPECIFICATION FOR CABLES WITH THERMOSETTING INSULATION FOR RATED VOLTAGES FROM 3.8/6.6 KV TO 19/33 KV
CEI UNI EN 45510-2-7 : 2006	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
16/30328917 DC : DRAFT APR 2016	BS EN 62488-2 ED 1.0 - POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS (APLC)
04/30111859 DC : 0	IEC 62271-1 - HIGH-VOLTAGE SWITCHGEAR AND CONTROL GEAR - PART 1: COMMON SPECIFICATIONS
CEI EN 62689-1 : 1ED 2017	CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS
98/232755 DC : DRAFT DEC 1998	IEC 61936-1 - POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES
NF EN 15500 : 2008	CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT
BS EN 45510-2-5:2002	Guide for the procurement of power station equipment. Electrical equipment Motors
12/30270636 DC : 0	BS EN 60909-0 - SHORT-CIRCUIT CURRENTS IN THREE-PHASE A.C. SYSTEMS - PART 0: CALCULATION OF CURRENTS
02/207106 DC : DRAFT JUN 2002	IEC 61606-2. ED.1 - AUDIO AND AUDIOVISUAL EQUIPMENT - DIGITAL AUDIO PARTS - BASIC MEASUREMENT METHODS OF AUDIO CHARACTERISTICS - PART 2: CONSUMER USE
CEI EN 60034-1 : 2015	ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
CSA IEC 61000-4-7 : 2013	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-7: TESTING AND MEASUREMENT TECHNIQUES - GENERAL GUIDE ON HARMONICS AND INTERHARMONICS MEASUREMENTS AND INSTRUMENTATION, FOR POWER SUPPLY SYSTEMS AND EQUIPMENT CONNECTED THERETO
09/30202310 DC : 0	BS EN 12514-2 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 2: SAFETY REQUIREMENTS AND TESTS - FEED PUMPS, CONTROL AND SAFETY DEVICES, SERVICE VESSELS
CEI EN 62488-1 : 2013	POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 1: PLANNING OF ANALOGUE AND DIGITAL POWER LINE CARRIER SYSTEMS OPERATING OVER EHV/HV/MV ELECTRICITY GRIDS
BS EN 61204:1995	Low-voltage power supply devices, d.c. output. Performance characteristics and safety requirements
I.S. EN 62693:2013	INDUSTRIAL ELECTROHEATING INSTALLATIONS - TEST METHODS FOR INFRARED ELECTROHEATING INSTALLATIONS (IEC 62693:2013 (EQV))
CAN/CSA-IEC 61000-4-7:13 (R2017)	Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto (Adopted IEC 61000-4-7:2002, edition 2:2002 consolidated with amendment 1:2008) \| Compatibilité électromagnétique (CEM) - Partie 4-7: Techniques d\'essai et de mesure - Guide général relatif aux mesures d\'harmoniques et d\'interharmoniques, ainsi qu\'à l\'appareillage de mesure, applicable aux réseaux d\'alimentation et aux appareils qui y sont raccordés (norme CEI 61000-4-7:2002 adoptée, édition 2:2002 consolidée par l\'amendement 1:2008)
BS EN 60269-1 : 2007	LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS
DIN EN 15500-1:2016-01 (Draft)	ENERGY PERFORMANCE OF BUILDINGS - CONTROL FOR HEATING, VENTILATING AND AIR CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5
EN IEC 61058-1:2018	Switches for appliances - Part 1: General requirements
DIN EN 12977-5:2016-08 (Draft)	THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT
I.S. EN 62606:2013	GENERAL REQUIREMENTS FOR ARC FAULT DETECTION DEVICES
PREN 61009-1 : DRAFT 2011	RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES
DD IEC PAS 60044-5 : DRAFT SEP 2002	INSTRUMENT TRANSFORMERS - PART 5: CAPACITOR VOLTAGE TRANSFORMERS
S.R. HD 60364-7-708:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-708: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - CARAVAN PARKS, CAMPING PARKS AND SIMILAR LOCATIONS
CEI UNI EN 45510-2-4 : 2000	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-4: ELECTRICAL EQUIPMENT - HIGH POWER STATIC CONVERTORS
IEC TR 60664-2-1:2011	Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing
CSA C61000.2.12 : 2004	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-12: ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC MEDIUM-VOLTAGE POWER SUPPLY SYSTEMS
CSA E61558.1:2012	SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
CAN/CSA-E61558-1:12 (R2017)	Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests (Adopted IEC 61558- 1:1997 + A1:1998, edition 2.1, 2009-04 with Canadian deviations) \| Sécurité des transformateurs, alimentations, bobines d\'inductance et produits analogues - Partie 1: Exigences générales et essais (norme CEI 61558-1:1997 + A1:1998 adoptée, édition 2.1, 2009-04 avec exigences propres au Canada)
IEC 60364-7-709:2007+AMD1:2012 CSV	Low-voltage electrical installations - Part 7-709: Requirements for special installations or locations - Marinas and similar locations
CSA C60044-8 : 2007 : R2011	INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
CEI EN 61810-1 : 2016	ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS
I.S. EN 50588-1:2017	MEDIUM POWER TRANSFORMERS 50 HZ, WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 1: GENERAL REQUIREMENTS
CEI EN 61869-4 : 2014	INSTRUMENT TRANSFORMERS - PART 4: ADDITIONAL REQUIREMENTS FOR COMBINED TRANSFORMERS
I.S. EN 60325:2004	RADIATION PROTECTION INSTRUMENTATION - ALPHA, BETA AND ALPHA/BETA (BETA ENERGY > 60 KEV) CONTAMINATION METERS AND MONITORS
IEC TR 63042-100:2016	UHV AC transmission systems - Part 100: General information
BS EN 60044-8:2002	Instrument transformers Electronic current transformers
UNE-EN 61000-3-12:2012	Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and
IEC 60906-2:2011	IEC system of plugs and socket-outlets for household and similar purposes - Part 2: Plugs and socket-outlets 15 A 125 V a.c. and 20 A 125 V a.c.
I.S. EN ISO 17409:2017	ELECTRICALLY PROPELLED ROAD VEHICLES - CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY - SAFETY REQUIREMENTS (ISO 17409:2015, CORRECTED VERSION 2015-12-15)
AHRI 320 : 1998	WATER-SOURCE HEAT PUMPS
I.S. EN 12098-1:2017	ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS - MODULES M3-5, 6, 7, 8
IEC 60137:2017	Insulated bushings for alternating voltages above 1000 V
BS EN 60137:2017	Insulated bushings for alternating voltages above 1000 V
BS EN 61000-2-2 : 2002	ELECTROMAGNETIC COMPATIBILITY (EMC) - ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC LOW-VOLTAGE POWER SUPPLY SYSTEMS
I.S. EN 60094-3:1999	MAGNETIC TAPE SOUND RECORDING AND REPRODUCING SYSTEMS - PART 3: METHODS OF MEASURING THE CHARACTERISTICS OF RECORDING AND REPRODUCING EQUIPMENT FOR SOUND ON MAGNETIC TAPE
CSA C22.3 No. 61936-1 : 2008	POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES
CSA C22.3 No. 61936-1 : 2008 : R2015	POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES
EN 50588-1:2017	Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements
S.R. CEN TS 12977-5:2010	THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT
NF EN 50512 : 2009	ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS)
I.S. EN 60898-1:2003	ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION (IEC 60898-1:2002 (MOD))
BS EN 61058-1 : 2002	SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
I.S. EN 61058-1:2002	SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
CEI EN 62022 : 2008	INSTALLED MONITORS FOR THE CONTROL AND DETECTION OF GAMMA RADIATIONS CONTAINED IN RECYCLABLE OR NON RECYCLABLE MATERIALS TRANSPORTED BY VEHICLES
I.S. EN 61008-1:2012&A1:2014/ac&A2:2014...A12:2017	RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES
I.S. EN 60358-1:2012	COUPLING CAPACITORS AND CAPACITOR DIVIDERS - PART 1: GENERAL RULES (IEC 60358-1:2012 (EQV))
I.S. EN 50470-1:2006	ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C)
CSA C22.2 No. 80601-2-55 : 2014(R2019)	MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS
I.S. EN 61131-2:2007	PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
SAE ARP 1940 : 1993	SOLID-STATE FREQUENCY CONVERTER 400 HERTZ, 3-PHASE OUTPUT
CEI EN 61800-9-2 : 1ED 2017	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 9-2: ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS
I.S. HD 60364-7-721:2009	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-721: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - ELECTRICAL INSTALLATIONS IN CARAVANS AND MOTOR CARAVANS
I.S. EN 50341-1:2012	OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
I.S. EN 61481-2:2014	LIVE WORKING - PHASE COMPARATORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES FROM 1 KV TO 36 KV A.C.
S.R. CLC/TS 50535:2010	RAILWAY APPLICATIONS - ONBOARD AUXILIARY POWER CONVERTER SYSTEMS
CSA C61400-2:2008	WIND TURBINES - PART 2: DESIGN REQUIREMENTS FOR SMALL WIND TURBINES
AHRI 340/360 : 2007	PERFORMANCE RATING OF COMMERCIAL AND INDUSTRIAL UNITARY AIR-CONDITIONING AND HEAT PUMP EQUIPMENT
EN IEC 62909-1:2018	Bi-directional grid-connected power converters - Part 1: General requirements
IEC PAS 80005-3:2014	Utility connections in port - Part 3: Low Voltage Shore Connection (LVSC) Systems - General requirements
CSA C22.2 No. 61058.1 : 2009 : INC : UPD 1 : 2013	SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
CEI EN 62756-1 : 2016	DIGITAL LOAD SIDE TRANSMISSION LIGHTING CONTROL - PART 1: BASIC REQUIREMENTS
IEC 61892-4:2007	Mobile and fixed offshore units - Electrical installations - Part 4: Cables
I.S. EN 15500:2008	CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT
NF EN 61851-22 : 2002	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 22: A.C. ELECTRIC VEHICLE CHARGING STATION
EN 50341-1:2012	Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications
I.S. EN 61400-2:2014	WIND TURBINES - PART 2: SMALL WIND TURBINES
I.S. EN 61851-1:2011	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS
IEC 61008-1:2010+AMD1:2012+AMD2:2013 CSV	Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part1: General rules
I.S. EN 60204-32:2008	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
IEC 60502-2 REDLINE : 3ED 2014	POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESSORIES FOR RATED VOLTAGES FROM 1 KV (U[M] = 1,2 KV) UP TO 30 KV (U[M] = 36 KV) - PART 2: CABLES FOR RATED VOLTAGES FROM 6 KV (U[M] = 7,2 KV) UP TO 30 KV (U[M] = 36 KV)
IEC 61584:2001	Radiation protection instrumentation - Installed, portable or transportable assemblies - Measurement of air kerma direction and air kerma rate
IEC 61800-2:2015	Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable speed a.c. power drive systems
IEC 62271-1:2017	High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
IEC 60204-1:2016	Safety of machinery - Electrical equipment of machines - Part 1: General requirements
IEC 60605-3-6:1996	Equipment reliability testing - Part 3: Preferred test conditions - Section 6: Test cycle 6: Outdoor transportable equipment - Low degree of simulation
IEC 61936-1:2010+AMD1:2014 CSV	Power installations exceeding 1 kV a.c. - Part 1: Common rules
IEC 60092-376 REDLINE : 3ED 2017	ELECTRICAL INSTALLATIONS IN SHIPS - PART 376: CABLES FOR CONTROL AND INSTRUMENTATION CIRCUITS 150/250 V (300 V)
IEC 60092-354:2014	Electrical installations in ships - Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (U_m = 7,2 kV) up to 30 kV (U_m = 36 kV)
IEC 60364-1:2005	Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
I.S. EN 62040-3:2011	UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS
ISO 14625:2007	Space systems — Ground support equipment for use at launch, landing or retrieval sites — General requirements
IEC 60204-33:2009	Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment
IEC 60092-353:2016	Electrical installations in ships - Part 353: Power cables for rated voltages 1 kV and 3 kV
S.R. CLC/TS 50457-1:2008	CONDUCTIVE CHARGING FOR ELECTRIC VEHICLES - PART 1: D.C. CHARGING STATION
IEC 60092-503:2007	Electrical installations in ships - Part 503: Special features - AC supply systems with voltages in the range of above 1 kV up to and including 15 kV
IEC 62689-1:2016	Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 1: General principles and requirements
DIN 40108:2003-06	ELECTRIC POWER TECHNOLOGY - CURRENT SYSTEMS - CONCEPTS, QUANTITIES, LETTER SYMBOLS
IEC 60092-376:2017 RLV	Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V)
IEC 62756-1:2015	Digital load side transmission lighting control (DLT) - Part 1: Basic requirements
BS EN 61800-1:1998	Adjustable speed electrical power drive systems Rating specifications for low voltage adjustable speed d.c. power drive systems
04/30125642 DC : DRAFT NOV 2004	IEC 61643-12 ED.2 - LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 12: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER DISTRIBUTION SYSTEMS - SELECTION AND APPLICATION PRINCIPLES
ISO 19859:2016	Gas turbine applications Requirements for power generation
BS EN 61131-2:2007	Programmable controllers Equipment requirements and tests
IEC 60044-1:1996+AMD1:2000+AMD2:2002 CSV	Instrument transformers - Part 1: Current transformers
17/30354643 DC : 0	BS EN 62933-2-1 - ELECTRIC ENERGY STORAGE (ESS) SYSTEMS - PART 2-1: UNIT PARAMETERS AND TESTING METHODS - GENERAL SPECIFICATION
15/30326358 DC : 0	BS EN 60898-3 - ELECTRICAL ACCESSORIES - CIRCUIT-BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 3: CIRCUIT-BREAKERS FOR D.C. OPERATION
IEC 61400-2:2013	Wind turbines - Part 2: Small wind turbines
EN 60065:2014/AC:2017-01	AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016)
UL 60730-1:5ED 2016-08	Automatic Electrical Controls - Part 1: General Requirements
CEI 18-63 : 2013	MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 2: SYSTEM DESIGN
I.S. EN ISO 14224:2016	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016)
EN 62244 : 2011	RADIATION PROTECTION INSTRUMENTATION - INSTALLED RADIATION MONITORS FOR THE DETECTION OF RADIOACTIVE AND SPECIAL NUCLEAR MATERIALS AT NATIONAL BORDERS
EN 61800-1:1998	Adjustable speed electrical power drive systems - Part 1: General requirements - Rating specifications for low voltage adjustable speed d.c. power drive systems
DIN EN 12098-4:2005-12	CONTROLS FOR HEATING SYSTEMS - PART 4: OPTIMUM START-STOP CONTROL EQUIPMENT FOR ELECTRICAL SYSTEMS
IEC 60137:2017 RLV	Insulated bushings for alternating voltages above 1000 V
EN 61400-1:2005/A1:2010	WIND TURBINES - PART 1: DESIGN REQUIREMENTS
DIN EN 61800-1 : 1999-08	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 1: GENERAL REQUIREMENTS; RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS
VDE 0160-101 : 1999-08	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS
IEC 61058-1:2016 RLV	Switches for appliances - Part 1: General requirements
DIN EN 61557-1 : 2007	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 1: GENERAL REQUIREMENTS
BS 6622:2007	Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV. Requirements and test methods
VDE 0418-12 : 1995	CLASSES 0,5, 1 AND 2 ALTERNATING CURRENT WATT HOUR METERS
BS 161:1990	Specification for tungsten filament lamps for domestic and similar general lighting purposes. Performance requirements
BIS IS/IEC 61058-1 : 2000(R2007)	SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
BS 6883:1999	Elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods
BS 3535-1(1996) : 1996	ISOLATING TRANSFORMERS AND SAFETY ISOLATING TRANSFORMERS - REQUIREMENTS
BS 6840-15:1992	Sound system equipment Specification for matching values for the interconnection of sound system components
BS 6581:1995	Common clauses for high-voltage switchgear and controlgear standards
BS 6622:1999	Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV
VDE 0414-2 : 99 AMD 1 2001	INSTRUMENT TRANSFORMERS - PART 1: INDUCTIVE VOLTAGE TRANSFORMERS
VDE 0557-1 : 2001	LOW-VOLTAGE POWER SUPPLY DEVICES, DC OUTPUT - PERFORMANCE CHARACTERISTICS AND SAFETY REQUIREMENTS
VDE 0559-4 : 1988	POWER CONVERTERS FOR ROLLING STOCK - DIRECT D.C. CONVERTERS (D.C. CHOPPER CONVERTERS)
VDI 3805 Blatt 24:2017-02 (Draft)	Product data exchange in the building services - Actuators used in building services
BS 1363-1:2016+A1:2018	13 A plugs, socket-outlets, adaptors and connection units Specification for rewirable and non-rewirable 13 A fused plugs
VDE 0414-44-7 : 2000	INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS
VDE 0100-537 : 1999	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT; CHAPTER 53: SWITCH GEAR AND CONTROL GEAR; SECTION 537: DEVICES FOR ISOLATION AND SWITCHING
VDE 0551 : 1995	ISOLATING TRANSFORMERS AND SAFETY ISOLATING TRANSFORMERS - REQUIREMENTS
BIS IS/IEC 60898-1 : 2002	ELECTRICAL ACCESSORIES - CIRCUIT-BREAKERS FOR OVER CURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR AC OPERATION
NEMA IEC 60974-1 : 2008	ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES
BS 6622:1991	Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3800/6600 V up to 19000/33000 V
BS 6883:1991	Specification for elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units
DIN EN 60044-7 : 2000	INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS
BS 7835:2007	Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV having low emission of smoke and corrosive gases when affected by fire. Requirements and test methods
VDE 0805 : 2001	SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT
BS 5817-4:1989	Specification for audiovisual, video and television equipment and systems Specification for matching values for the interconnection of equipment in a system
DIN VDE 0100-537 : 1999	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - CHAPTER 53: SWITCHGEAR AND CONTROL GEAR - SECTION 537: DEVICES FOR ISOLATION AND SWITCHING
VDE 0435-140 : 1999	ELECTROMECHANICAL NON-SPECIFIED TIME ALL-OR-NOTHING ELECTRICAL RELAYS - INSULATION COORDINATION
UNE-IEC/TR 60909-2:2010 IN	Short-circuit currents in three-phase a.c. systems - Part 2: Data of electrical equipment for short-circuit current calculations
I.S. HD 538.1:1992	THREE-PHASE DRY-TYPE DISTRIBUTION TRANSFORMERS 50 HZ, FROM 100 TO 2500 KVA, WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 1: GENERAL REQUIREMENTS AND REQUIREMENTS FOR TRANSFORMERS WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 24 KV
07/30167498 DC : 0	BS EN 61822 - ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - CONSTANT CURRENT REGULATORS
CLC/TS 50535:2010	Railway applications - Onboard auxiliary power converter systems
NF EN 61869-5 : 2012	INSTRUMENT TRANSFORMERS - PART 5: ADDITIONAL REQUIREMENTS FOR CAPACITOR VOLTAGE TRANSFORMERS
CSA CEI/IEC 1000.2.1 : 1997(R2018)	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2: ENVIRONMENT - SECTION 1: DESCRIPTION OF THE ENVIRONMENT - ELECTROMAGNETIC ENVIRONMENT FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC POWER SUPPLY SYSTEMS
BS EN 60044-2:1999	Instrument transformers Inductive voltage transformers
BS EN 61851-21-1:2017	Electric vehicle conductive charging system Electric vehicle on-board charger EMC requirements for conductive connection to an AC/DC supply
12/30239877 DC : 0	BS EN 60065 ED 8.0 - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
BS 7400(1991) : 1991 AMD 7672	SPECIFICATION FOR ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
BS 4999-101:1987	General requirements for rotating electrical machines Specification for rating and performance
BS EN 62244:2011	Radiation protection instrumentation. Installed radiation monitors for the detection of radioactive and special nuclear materials at national borders
IEC 60898:1995	Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations
09/30197590 DC : 0	BS EN ISO 80601-2-55 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS
14/30296572 DC : 0	BS EN 60601-1-11 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT
BS 7404-2.1(1991) : 1991	TELECONTROL EQUIPMENT AND SYSTEMS - OPERATING CONDITIONS - SPECIFICATION FOR CLASSES OF ENVIRONMENTAL CONDITIONS AND POWER SUPPLIES
DIN EN ISO 17409 E : 2017	ELECTRICALLY PROPELLED ROAD VEHICLES - CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY - SAFETY REQUIREMENTS (ISO 17409:2015, CORRECTED VERSION 2015-12-15)
04/30095682 DC : DRAFT APR 2004	IEC 60974-1 ED.3 - ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES
15/30314548 DC : 0	BS EN 61800-9-2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 9-2: ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS
BS EN 50308:2004	Wind turbines. Protective measures. Requirements for design, operation and maintenance
BS IEC 61334-1.1 : 1995	DISTRIBUTION AUTOMATION USING DISTRIBUTION LINE CARRIER SYSTEMS - GENERAL CONSIDERATIONS - GUIDE TO DISTRIBUTION AUTOMATION SYSTEM ARCHITECTURE
BS EN 50512:2009	Electrical installations for lighting and beaconing of aerodromes. Advanced visual docking guidance systems (A-VDGS)
UNE-EN 50512:2011	Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS)
I.S. EN 60974-1:2012	ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES (IEC 60974-1:2012 (EQV))
15/30297234 DC : 0	BS 1363-2 - 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 2: SPECIFICATION FOR 13 A SWITCHED AND UNSWITCHED SOCKET-OUTLETS
BS EN 62488-1:2013	Power line communication systems for power utility applications Planning of analogue and digital power line carrier systems operating over EHV/HV/MV electricity grids
BS IEC 60951-1:2009	Nuclear power plants. Instrumentation important to safety. Radiation monitoring for accident and post-accident conditions General requirements
15/30297232 DC : 0	BS 1363-1 - 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 1: SPECIFICATION FOR REWIRABLE AND NON-REWIRABLE 13 A FUSED PLUGS
CEI EN 60044-7 : 2001	INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS
BS EN 61000-2-4:2002	Electromagnetic compatibility (EMC). Environment Compatibility levels in industrial plants for low-frequency conducted disturbances
CEI 109-5 : 2011	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 2-1: APPLICATION GUIDE - EXPLANATION OF THE APPLICATION OF THE IEC 60664 SERIES, DIMENSIONING EXAMPLES AND DIELECTRIC TESTING
DIN EN 60742 : 1995	ISOLATING TRANSFORMERS AND SAFETY ISOLATING TRANSFORMERS - REQUIREMENTS
17/30356406 DC : 0	BS EN 17116-2 - SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 2: BATCH DRYING TUMBLERS
DIN EN ISO 80601-2-72 E : 2016	MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS (ISO 80601-2-72:2015)
UNE-EN 61008-1:2013	Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules
08/30181001 DC : DRAFT APR 2008	BS EN 50512 - ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS)
BS IEC 61584:2001	Radiation protection instrumentation. Installed, portable or transportable assemblies. Measurement of air kerma direction and air kerma rate
BS EN 61000-4-25 : 2002	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-25: TESTING AND MEASUREMENT TECHNIQUES - HEMP IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS
11/30247849 DC : 0	BS EN 12977-5 - THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT
PD IEC/TR 60909-2:2008	Short-circuit currents in three-phase a.c. systems Data of electrical equipment for short-circuit current calculations
I.S. EN 62484:2015	RADIATION PROTECTION INSTRUMENTATION - SPECTROSCOPY-BASED PORTAL MONITORS USED FOR THE DETECTION AND IDENTIFICATION OF ILLICIT TRAFFICKING OF RADIOACTIVE MATERIAL
HD 60364-7-709:2009/A11:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-709: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MARINAS AND SIMILAR LOCATIONS
PREN 12098-3 : DRAFT 2015	CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS - MODULES M3-5, 6, 7, 8
UNE-EN 60137:2011	Insulated bushings for alternating voltages above 1 000 V
EN 61851-21:2002	Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply
BS EN 61851-22:2002	Electric vehicle conductive charging system A.C. electric vehicle charging station
UTEC 66 558 : 2006	CAPACITANCE GRADED OUTDOOR BUSHING 52 KV UP TO 420 KV FOR OIL IMMERSED TRANSFORMERS
CSA C61000.2.12 : 2004 : R2014	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-12: ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC MEDIUM-VOLTAGE POWER SUPPLY SYSTEMS
16/30338981 DC : 0	BS EN 60934 - CIRCUIT-BREAKERS FOR EQUIPMENT (CBE)
IEC 61869-11:2017	Instrument transformers - Part 11: Additional requirements for low power passive voltage transformers
14/30297921 DC : 0	BS EN 62040-5-3 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 5-3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS FOR D.C. UPS
UNE-EN 61938:2014	Multimedia systems - Guide to the recommended characteristics of analogue interfaces to achieve interoperability
BS EN 60268-7:2011	Sound system equipment Headphones and earphones
CEI EN 61400-3 : 2009	WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES
I.S. EN 61800-3:2005	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004 (EQV))
CEI 56-22 : 2000	EQUIPMENT RELIABILITY TESTING - PART 3: PREFERRED TEST CONDITIONS - SECTION 6: TEST CYCLE 6: OUTDOOR TRANSPORTABLE EQUIPMENT - LOW DEGREE OF SIMULATION
CEI EN 61293 : 1997	MARKING ELECTRICAL EQUIPMENT WITH RATINGS RELATED TO ELECTRICAL SUPPLY - SAFETY REQUIREMENTS
03/109124 DC : DRAFT JUNE 2003	IEC 61400-1 ED.3.0 - WIND TURBINES - PART 1: DESIGN REQUIREMENTS
BS 7626:1993	Specification for current transformers
NF EN 60044-1 : 2000 AMD 2 2003	INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS
03/307803 DC : DRAFT MAY 2003	EN 61009-1 - RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCB'S) - PART 1: GENERAL RULES
04/30112673 DC : DRAFT APR 2004	IEC 62314 ED.1 - SOLID-STATE RELAYS
AHRI 330 : 1998	GROUND SOURCE CLOSED-LOOP HEAT PUMPS
BS 7484:1991	Guide to electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems
IEC 61851-22:2001	Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station
BS 6581:1985	Specification for common requirements for high-voltage switchgear and controlgear standards
02/205451 DC : DRAFT MAY 2002	IEC 61472. ED.2.0 - LIVE WORKING - MINIMUM APPROACH DISTANCES FOR A.C. SYSTEM - METHOD OF CALCULATION
BS EN 50125-3:2003	Railway applications. Environmental conditions for equipment Equipment for signalling and telecommunications
13/30248785 DC : 0	BS EN 61800-2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 2: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE FREQUENCY A.C. POWER DRIVE SYSTEMS
UNE-EN 61400-2:2015	Wind turbines - Part 2: Small wind turbines
BS EN 61869-3:2011	Instrument transformers Additional requirements for inductive voltage transformers
07/30172925 DC : 0	BS IEC 60951-1 - NUCLEAR POWER PLANTS - INSTRUMENTATION IMPORTANT TO SAFETY - RADIATION MONITORING SYSTEM FOR ACCIDENT AND POST ACCIDENT CONDITIONS - PART 1: GENERAL REQUIREMENTS
04/30067001 DC : DRAFT AUG 2004
BS EN 60034-30-1:2014	Rotating electrical machines Efficiency classes of line operated AC motors (IE code)
DD ENV 61400-1:1995	Wind turbine generator systems Safety requirements
15/30265353 DC : 0	BS EN 62271-1 ED 2 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
BS EN 50463:2007	Railway applications. Energy measurement on board trains
UNE-IEC 60092-353:2017	Electrical installations in ships - Part 353: Power cables for rated voltages 1 kV and 3 kV
I.S. EN IEC 61869-11:2018	INSTRUMENT TRANSFORMERS - PART 11: ADDITIONAL REQUIREMENTS FOR LOW-POWER PASSIVE VOLTAGE TRANSFORMERS
IEC 60781:1989	Application guide for calculation of short-circuit currents in low-voltage radial systems
08/30191891 DC : DRAFT OCT 2008	BS EN 61936-1 - POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES
04/30111589 DC : 0
15/30331525 DC : 0	BS EN 12098-5 - CONTROLS FOR HEATING SYSTEMS - PART 5: START-STOP SCHEDULERS FOR HEATING SYSTEMS - MODULES M3-5, 6, 7, 8
BS EN 61534-1 : 2011	POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS
BS EN 60974-1:2012	Arc welding equipment Welding power sources
BS Z 100:1999	Space systems. Ground support equipment for use at launch, landing, or retrieval sites. General requirements
UNE-EN 60034-1:2011	Rotating electrical machines - Part 1: Rating and performance
BS EN 60704-1 : 2010	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE NOISE - PART 1: GENERAL REQUIREMENTS
EN 62040-3:2011	Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
08/30195564 DC : 0	BS EN 60974-1 - ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES
BIS IS 12640-2 : 2008	RESIDUAL CURRENT OPERATED CIRCUIT-BREAKING FOR HOUSEHOLD AND SIMILAR USES - PART 2: CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION (RCBOS)
EN 60044-7:2000	Instrument transformers - Part 7: Electronic voltage transformers
PREN 12098-1 : DRAFT 2015	CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS - MODULES M3-5, 6, 7, 8
EN 61534-1:2011/A1:2014	POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS (IEC 61534-1:2011/A1:2014)
NF EN 60861 : 2008	EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS
IEC 60669-1:2017 RLV	Switches for household and similar fixed-electrical installations - Part 1: General requirements
CSA C60044-2 : 2007	INSTRUMENT TRANSFORMERS - PART 2: INDUCTIVE VOLTAGE TRANSFORMERS
IEC TR 60909-4:2000	Short-circuit currents in three-phase a.c. systems - Part 4: Examples for the calculation of short-circuit currents
BS EN 61800-3 : 2004	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS
CSA C60044-8 :2007	INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
NF ISO 22188 : 2006	MONITORING FOR INADVERTENT MOVEMENT AND ILLICIT TRAFFICKING OF RADIOACTIVE MATERIAL
I.S. EN 60034-30-1:2014	ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE)
I.S. EN 61869-3:2011	INSTRUMENT TRANSFORMERS - PART 3: ADDITIONAL REQUIREMENTS FOR INDUCTIVE VOLTAGE TRANSFORMERS (IEC 61869-3:2011)
CSA C60044-2 : 2007 : R2011	INSTRUMENT TRANSFORMERS - PART 2: INDUCTIVE VOLTAGE TRANSFORMERS
DIN EN 61660-1 : 1998 COR 1 2010	SHORT-CIRCUIT CURRENTS - SHORT-CIRCUIT CURRENTS IN D.C. AUXILIARY INSTALLATIONS IN POWER PLANTS AND SUBSTATIONS - PART 1: CALCULATION OF SHORT-CIRCUIT CURRENTS
API 17E REDLINE : 2010	SPECIFICATION FOR SUBSEA UMBILICALS
NF EN 62052-11 : 2003 AMD 1 2017	ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT
BS 5760-13.6:1997	Reliability of systems, equipment and components. Guide to reliability test conditions for consumer equipment Outdoor transportable equipment. Low degree of simulation
EN IEC 62933-2-1:2018	Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification
API STD 541 : 2014	FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER
I.S. EN 60044-5:2004	INSTRUMENT TRANSFORMERS - PART 5: CAPACITOR VOLTAGE TRANSFORMERS
I.S. EN 50628:2016	ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES
PD CLC/TR 50422:2013	Guide for the application of the European Standard EN 50160
I.S. EN 15500-1:2017	ENERGY PERFORMANCE OF BUILDINGS - CONTROL FOR HEATING, VENTILATING AND AIR CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5
I.S. EN 61660-1:1999	SHORT-CIRCUIT CURRENTS IN D.C. AUXILIARY INSTALLATIONS IN POWER PLANTS AND SUBSTATIONS - CALCULATION OF SHORT-CIRCUIT CURRENTS
I.S. EN 61869-1:2009	INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
NF EN 60269-1 : 2007 AMD 2 2014	LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS
I.S. EN 61643-11:2012	LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TESTS METHODS
I.S. EN 60127-1:2006	MINIATURE FUSES - PART 1: DEFINITIONS FOR MINIATURE FUSES AND GENERAL REQUIREMENTS FOR MINIATURE FUSE-LINKS
I.S. EN 62022:2007	INSTALLED MONITORS FOR THE CONTROL AND DETECTION OF GAMMA RADIATIONS CONTAINED IN RECYCLABLE OR NON-RECYCLABLE MATERIALS TRANSPORTED BY VEHICLES
CSA C61400-2 : 2008 : R2013	WIND TURBINES - PART 2: DESIGN REQUIREMENTS FOR SMALL WIND TURBINES
BS EN 62271-1:2017	High-voltage switchgear and controlgear Common specifications for alternating current switchgear and controlgear
BS EN 60127-1 : 2006	MINIATURE FUSES - PART 1: DEFINITIONS FOR MINIATURE FUSES AND GENERAL REQUIREMENTS FOR MINIATURE FUSE-LINKS
I.S. EN 60601-1-12:2015	MEDICAL ELECTRICAL EQUIPMENT - PART 1-12: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS INTENDED FOR USE IN THE EMERGENCY MEDICAL SERVICES ENVIRONMENT
BS EN 60934 : 2001	CIRCUIT-BREAKERS FOR EQUIPMENT (CBE)
I.S. EN 61140:2016	PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT
I.S. EN 60846:2004	RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION
I.S. EN 12098-3:2017	ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS - MODULES M3-5, 6, 7, 8
NF EN 60071-1 : 2006 AMD 1 2010	INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES
I.S. EN 61606-1:2009	AUDIO AND AUDIOVISUAL EQUIPMENT - DIGITAL AUDIO PARTS - BASIC MEASUREMENT METHODS OF AUDIO CHARACTERISTICS - PART 1: GENERAL
I.S. EN 61439-1:2011	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
UNE-EN 61481-2:2015	Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c.
I.S. EN 50308:2005	WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE
IEC TR 61334-1-1:1995	Distribution automation using distribution line carrier systems - Part 1: General considerations - Section 1: Distribution automation system architecture
I.S. EN IEC 62909-1:2018	BI-DIRECTIONAL GRID-CONNECTED POWER CONVERTERS - PART 1: GENERAL REQUIREMENTS
IEC 61606-1:2009	Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics - Part 1: General
UNI EN 12977-5 : 2012	THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT
EN 12098-1:2017	Energy Performance of Buildings - Controls for heating systems - Part 1: Control equipment for hot water heating systems - Modules M3-5, 6, 7, 8
CLC/TS 50457-1:2008	Conductive charging for electric vehicles - Part 1: D.C. charging station
BS EN 60065 : 2014	AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014, MODIFIED)
CEI EN 61000-2-12 : 2004	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-12: ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC MEDIUM-VOLTAGE POWER SUPPLY SYSTEMS
BIS IS/IEC 62271-1 : 2007	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS
I.S. EN 61851-21-1:2017	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21-1: ELECTRIC VEHICLE ON-BOARD CHARGER EMC REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN AC/DC SUPPLY
I.S. EN 61098:2007	RADIATION PROTECTION INSTRUMENTATION - INSTALLED PERSONNEL SURFACE CONTAMINATION MONITORING ASSEMBLIES
UNE-HD 60364-4-443:2016	Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances - Clause 443: Protection against transient overvoltages of atmospheric origin or due to switching
EN 60137:2017	Insulated bushings for alternating voltages above 1 000 V
IEC 61347-1 REDLINE : 3ED 2015	LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS
I.S. EN 61036:1997	ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
CEI EN 50341-1 : 2013	OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
IEC TR 63036:2016	Electrical interface specification for phase-cut dimmer in phase-cut dimmed lighting systems
IEC 61363-1:1998	Electrical installations of ships and mobile and fixed offshore units - Part 1: Procedures for calculating short-circuit currents in three-phase a.c.
HD 62640:2015/A11:2016	RESIDUAL CURRENT DEVICES WITH OR WITHOUT OVERCURRENT PROTECTION FOR SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR USES (IEC 62640:2011, MODIFIED)
EN IEC 63044-3:2018	Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements
S.R. CLC/TS 61643-12:2009	LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 12: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER DISTRIBUTION SYSTEMS - SELECTION AND APPLICATION PRINCIPLES
IEEE C57.12.36-2007	IEEE Standard Requirements for Liquid-Immersed Distribution Substation Transformers
CEI EN 61660-1 : 1999	SHORT-CIRCUIT CURRENTS IN D.C. AUXILIARY INSTALLATIONS IN POWER PLANTS AND SUBSTATIONS - PART 1: CALCULATION OF SHORT-CIRCUIT CURRENTS
I.S. EN 62488-1:2013	POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 1: PLANNING OF ANALOGUE AND DIGITAL POWER LINE CARRIER SYSTEMS OPERATING OVER EHV/HV/MV ELECTRICITY GRIDS (IEC 62488-1:2012 (EQV))
I.S. HD 384.7.711:2003	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-711: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXHIBITIONS, SHOWS AND STANDS
ES 203 215 : 1.2.1	ENVIRONMENTAL ENGINEERING (EE); MEASUREMENT METHODS AND LIMITS FOR POWER CONSUMPTION IN BROADBAND TELECOMMUNICATION NETWORKS EQUIPMENT
EN 61936-1 : 2010 AMD 1 2014	POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES (IEC 61936-1:2010/A1:2014)
NF EN 61534-1 : 2011 AMD 1 2014	POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS
IEC 61009-1:2010+AMD1:2012+AMD2:2013 CSV	Residual current operated circuit-breakers with integral overcurrentprotection for household and similar uses (RCBOs) - Part 1: General rules
EN ISO 80601-2-55:2018	Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors (ISO 80601-2-55:2018)
CSA C61869-4 : 2014	INSTRUMENT TRANSFORMERS - PART 4: ADDITIONAL REQUIREMENTS FOR COMBINED TRANSFORMERS
EN 15500-1:2017	Energy Performance of Buildings - Control for heating, ventilating and air conditioning applications - Part 1: Electronic individual zone control equipment - Modules M3-5, M4-5, M5-5
ISO 80601-2-55:2018	Medical electrical equipment — Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors
IEC 60730-2-17:1997+AMD1:2000+AMD2:2007 CSV	Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements
IEC 60909:1988	Short-circuit current calculation in three-phase a.c. systems
IEC 60974-1:2017	Arc welding equipment - Part 1: Welding power sources
IEC 61643-12:2008	Low-voltage surge protective devices - Part 12: Surge protective devices connected to low-voltage power distribution systems - Selection and application principles
I.S. EN 50463:2007	RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS
IEC 61558-1:2017	Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
IEC 62022:2004	Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles
IEC 60092-353 REDLINE : 4ED 2016	ELECTRICAL INSTALLATIONS IN SHIPS - PART 353: POWER CABLES FOR RATED VOLTAGES 1 KV AND 3 KV
IEC 60755:2017	General safety requirements for residual current operated protective devices
IEC 61727:2004	Photovoltaic (PV) systems - Characteristics of the utility interface
IEC 61800-9-2:2017	Adjustable speed electrical power drive systems - Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Energy efficiency indicators for power drive systems and motor starters
IEC 61058-1 REDLINE : 4ED 2016	SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
I.S. EN 61204:1996	LOW-VOLTAGE POWER SUPPLY DEVICES, D.C. OUTPUT - PERFORMANCE CHARACTERISTICS
IEC 60768:2009	Nuclear power plants - Instrumentation important to safety - Equipment for continuous in-line or on-line monitoring of radioactivity in process streams for normal and incident conditions
I.S. EN 60204-1:2006	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
IEC 60951-1:2009	Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post-accident conditions - Part 1: General requirements
IEC 62933-2-1:2017	Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification
IEC 60532:2010	Radiation protection instrumentation - Installed dose rate meters, warning assemblies and monitors - X and gamma radiation of energy between 50 keV and 7 MeV
NF EN 61810-1 : 2015	ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS
NF EN 61851-1 : 2012	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS
UNE-EN 61347-1:2016	Lamp controlgear - Part 1: General and safety requirements
08/30186704 DC : DRAFT JULY 2008	BS EN 61851-1 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS
BS EN 12098-4:2005	Controls for heating systems Optimum start-stop control equipment for electrical systems
IEC 60044-8:2002	Instrument transformers - Part 8: Electronic current transformers
18/30375223 DC	BS EN 60947-4-3. Low-voltage switchgear and controlgear Part 4-3. Contactors and motor-starters. Semiconductor controllers and semiconductor contactors for non-motor loads
IEC 60730-2-2:2001+AMD1:2005 CSV	Automatic electrical controls for household and similar use - Part 2-2: Particular requirements for thermal motor protectors
DD CLC/TS 61643-12:2009	Low-voltage surge protective devices Surge protective devices connected to low-voltage power distribution systems. Selection and application principles
IEC 60044-5:2004	Instrument transformers - Part 5: Capacitor voltage transformers
IEC 61869-3:2011	Instrument transformers - Part 3: Additional requirements for inductive voltage transformers
IEC 61800-4:2002	Adjustable speed electrical power drive systems - Part 4: General requirements - Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV
ISO 14224:2016	Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment
IEC 61810-1:2015	Electromechanical elementary relays - Part 1: General and safety requirements
UNE-EN 61869-1:2010	Instrument transformers -- Part 1: General requirements
UNE-EN 50160:2011	Voltage characteristics of electricity supplied by public electricity networks
EN 60268-7:2011	Sound system equipment - Part 7: Headphones and earphones
EN 60664-1:2007	Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
EN 60898-1:2003/A13:2012	ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION (IEC 60898-1:2002, MODIFIED)
IEC 60092-353:2016 RLV	Electrical installations in ships - Part 353: Power cables for rated voltages 1 kV and 3 kV
UNE-EN ISO 17409:2017	Electrically propelled road vehicles - Connection to an external electric power supply - Safety requirements (ISO 17409:2015, Corrected version 2015-12-15)
UNE-EN 60730-1:2013	Automatic electrical controls for household and similar use - Part 1: General requirements
EN 60601-1-12:2015	Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment
UNE-EN 60204-1:2007	Safety of machinery - Electrical equipment of machines - Part 1: General requirements
UNI EN 12098-1 : 2013	CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS
EN 60898-1:2003/A13:2012	ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION (IEC 60898-1:2002, MODIFIED)
UNI EN 12098-3 : 2013	CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS
BS 6480:1988	Specification for impregnated paper-insulated lead or lead alloy sheathed electric cables of rated voltages up to and including 33000 V
UNE-EN 61869-5:2012	Instrument transformers - Part 5: Additional requirements for capacitor voltage transformers
CSA E60974.1 : 2012	ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES
UNE-EN 61000-4-7:2004	Electromagnetic compatibility (EMC) -- Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
ISO 7724-1:1984	Paints and varnishes Colorimetry Part 1: Principles
I.S. HD 428.1:1992	THREE PHASE OIL-IMMERSED DISTRIBUTION TRANSFORMERS, 50 HZ, FROM 50 TO 2500 KVA WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 1: GENERAL REQUIREMENTS AND REQUIREMENTS FOR TRANSFORMERS WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 24 KV
BIS IS/IEC 60034-1 : 2004 AMD 1 2015	ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
ANSI/AAMI HA60601-1-11:2015	MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT
IEC GUIDE 111:2004	Electrical high-voltage equipment in high-voltage substations - Common recommendations for product standards
CAN/CSA-C61000-2-2-04 (R2018)	Electromagnetic Compatibility (EMC) - Part 2-2: Environment - Compatibility Levels for Low-Frequency Conducted Disturbances and Signalling in Public Low-Voltage Power Supply Systems (Adopted CEI/IEC 61000-2-2:2002, second edition, 2002-03, with Canadian deviations) \| Compatibilité électromagnétique (CEM) - Partie 2-2: Environnement - Niveaux de compatibilité pour les perturbations conduites à basse fréquence et la transmission des signaux sur les réseaux publics d\'alimentation basse tension (norme CEI/IEC 61000-2-2:2002 adoptée, deuxième édition, 2002-03, avec exigences propres au Canada)
DIN VDE 0559-4 : 1988	POWER CONVERTERS FOR ROLLING STOCK - DIRECT D.C. CONVERTERS (D.C. CHOPPER CONVERTERS)
PREN 12098-5 : DRAFT 2015	CONTROLS FOR HEATING SYSTEMS - PART 5: START-STOP SCHEDULERS FOR HEATING SYSTEMS - MODULES M3-5, 6, 7, 8
PREN 13487 : DRAFT 2017	HEAT EXCHANGER - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS AND DRY COOLERS - SOUND MEASUREMENT
BS EN 61660-1:1997	Short-circuit currents in d.c auxiliary installations in power plants and substations Calculation of short-circuit currents
BS 5992-3:1980	Electrical relays Specification for the insulation testing of electrical relays
IEC TS 60815-1:2008	Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 1: Definitions, information and general principles
BS EN 60870-2-1:1996	Telecontrol equipment and systems. Operating conditions Power supply and electromagnetic compatibility
CEI EN 60974-1 : 2013	ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES
CEI EN 60044-8 : 2004	INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRASFORMERS
I.S. EN 62756-1:2015	DIGITAL LOAD SIDE TRANSMISSION LIGHTING CONTROL - PART 1: BASIC REQUIREMENTS
BS EN 61098:2007	Radiation protection instrumentation. Installed personnel surface contamination monitoring assemblies
BS EN ISO 80601-2-72:2015	Medical electrical equipment Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients
08/30178754 DC : DRAFT MAR 2008	BS EN 60268-7 - SOUND SYSTEM EQUIPMENT - PART 7 - HEADPHONES AND EARPHONES (GMT)
BS EN 61800-9-2:2017	Adjustable speed electrical power drive systems Ecodesign for power drive systems, motor starters, power electronics and their driven applications. Energy efficiency indicators for power drive systems and motor starters
CSA C22.4 PACKAGE : 2009	CONSISTS OF C22.4 NO. 1-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE AND C22.4 NO. 2-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE - SAFETY MANAGEMENT SYSTEM REQUIREMENTS
BS 5760-13.2:1993	Reliability of systems, equipment and components. Guide to reliability test conditions for consumer equipment Conditions providing a high degree of simulation for equipment for stationary use in weatherprotected locations
CEI EN 60034-30-1 : 2015	ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE)
05/30136690 DC : DRAFT JUL 2005	CLC/TS 50458 - CAPACITANCE GRADED OUTDOOR BUSHING 52 KV UP TO 420 KV FOR OIL IMMERSED TRANSFORMERS
BIS IS/IEC 60044-1 : 2003	INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS
CEI EN 62244 : 2012	RADIATION PROTECTION INSTRUMENTATION - INSTALLED RADIATION MONITORS FOR THE DETECTION OF RADIOACTIVE AND SPECIAL NUCLEAR MATERIALS AT NATIONAL BORDERS
CEI CLC/TR 50422 : 2015	GUIDE FOR THE APPLICATION OF THE EUROPEAN STANDARD EN 50160
CEI CLC/TS 50535 : 2011	RAILWAY APPLICATIONS - ONBOARD AUXILIARY POWER CONVERTER SYSTEMS
04/30125628 DC : DRAFT NOV 2004	IEC 60364-7-721 ED 1 - ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-721: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - INSTALLATIONS IN CARAVANS AND MOTOR CARAVANS
BS EN 61869-5:2011	Instrument transformers Additional requirements for capacitor voltage transformers
HD 553 : 200S2	CURRENT TRANSFORMERS
CEI CLC/TS 50534 : 2011	RAILWAY APPLICATIONS - GENERIC SYSTEM ARCHITECTURES FOR ONBOARD ELECTRIC AUXILIARY POWER SYSTEMS
PD IEC/TR 62655:2013	Tutorial and application guide for high-voltage fuses
13/30264413 DC : 0	BS EN ISO 80601-2-72 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS
UNI EN ISO 13628-5 : 2010	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS
DD CLC/TS 50534:2010	Railway applications. Generic system architectures for onboard electric auxiliary power systems
PD IEC/TS 62898-1:2017	Microgrids Guidelines for microgrid projects planning and specification
13/30267625 DC : 0	BS EN 61481-2 ED 1.0 - LIVE WORKING - PHASE COMPARATORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES FROM 1 KV TO 36 KV A.C
EN 62689-1:2016	Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 1: General principles and requirements
CEI EN 61869-3 : 2012	INSTRUMENT TRANSFORMERS - PART 3: ADDITIONAL REQUIREMENTS FOR INDUCTIVE VOLTAGE TRANSFORMERS
BS IEC 61559-1:2009	Radiation protection instrumentation in nuclear facilities. Centralized systems for continuous monitoring of radiation and/or levels of radioactivity General requirements
NF EN 50533 : 2012 AMD 1 2018	RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
97/703042 DC : DRAFT FEB 1997	PREN 50275-1 - CONDUCTIVE CHARGING FOR ELECTRIC VEHICLES - PART 1: GENERAL CONSIDERATIONS
BS IEC 61017:2016	Radiation protection instrumentation. Transportable, mobile or installed equipment to measure photon radiation for environmental monitoring
BS EN 60044-7:2000	Instrument transformers Electronic voltage transformers
16/30349357 DC : 0	PD IEC/TS 62898-1 ED1.0 - MICROGRIDS - GUIDELINES FOR MICROGRID PROJECTS PLANNING AND SPECIFICATION
12/30245174 DC : 0	BS EN 60601-1-12 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-12: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS INTENDED FOR USE IN THE EMERGENCY MEDICAL SERVICES ENVIRONMENT
BS IEC 60092-503:2007	Electrical installations in ships Special features. AC supply systems with voltages in the range of above 1 kV up to and including 15 kV
CEI EN 60325 : 2005	RADIATION PROTECTION INSTRUMENTATION - ALPHA, BETA AND ALPHA/BETA (BETA ENERGY > 60 KEV) CONTAMINATION METERS AND MONITORS
BS IEC 60861 : 2006	EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS
I.S. EN 61400-1:2005	WIND TURBINES - PART 1: DESIGN REQUIREMENTS
AHRI 430 : 1999	PERFORMANCE RATING OF CENTRAL STATION AIR-HANDLING UNITS
CEI EN 50125-3 : 2004	RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 3: EQUIPMENT FOR SIGNALLING AND TELECOMMUNICATIONS
TR 103 820 : 1.1.1	FIXED RADIO SYSTEMS; ENERGY EFFICIENCY METRICS AND TEST PROCEDURES FOR POINT-TO-POINT FIXED RADIO SYSTEMS
PD IEC/PAS 80005-3:2014	Utility connections in port Low Voltage Shore Connection (LVSC) Systems. General requirements
DIN EN 60521 : 1995	CLASSES 0,5, 1 AND 2 ALTERNATING-CURRENT WATTHOUR METERS
10/30227237 DC : 0	BS EN 62488-1 - PLANNING OF ANALOGUE AND DIGITAL POWER LINE CARRIER SYSTEMS - PART 1: OPERATING OVER EHV/HV/MV ELECTRICITY GRIDS
DIN EN 61268 : 1996	ALTERNATING CURRENT STATIC VAR-HOUR METERS FOR REACTIVE ENERGY (CLASSES 2 AND 3)
UNE-EN 61869-4:2017	Instrument transformers - Part 4: Additional requirements for combined transformers
S.R. CLC/TS 62603-1:2014	INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINE FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
CSA C61869-3 : 2014	INSTRUMENT TRANSFORMERS - PART 3: ADDITIONAL REQUIREMENTS FOR INDUCTIVE VOLTAGE TRANSFORMERS
CEI EN 62314 : 2007	SOLID-STATE RELAYS
09/30155521 DC : 0	BS EN 60601-1-11 ED.1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT
HD 60364-1:2008/A11:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: FUNDAMENTAL PRINCIPLES, ASSESSMENT OF GENERAL CHARACTERISTICS, DEFINITIONS
04/30115723 DC : DRAFT JUN 2004
BS EN 61000-3-12:2011	Electromagnetic compatibility (EMC) Limits. Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and ≤ 75 A per phase
IEC 60909-0:2016	Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents
UNE-EN 61869-3:2012	Instrument transformers - Part 3: Additional requirements for inductive voltage transformers
04/30113789 DC : DRAFT MAY 2004	EN 60846 - RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION
13/30280187 DC : 0	BS EN 50598-2 - ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 2: ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS
UNE-EN 60065:2015	Audio, video and similar electronic apparatus - Safety requirements
BS ISO 14625:2007	Space systems. Ground support equipment for use at launch, landing or retrieval sites. General requirements
CEI EN 61098 : 2008	RADIATION PROTECTION INSTRUMENTATION - INSTALLED PERSONNEL SURFACE CONTAMINATION MONITORING ASSEMBLIES
08/30183914 DC : DRAFT JUNE 2008	BS EN 60358-1 - COUPLING CAPACITORS AND CAPACITOR DIVIDERS - PART 1: COMMON CLAUSES
BS EN 60742:1996	Isolating transformers and safety isolating transformers. Requirements
CEI EN 60268-7 : 2012	SOUND SYSTEM EQUIPMENT - PART 7: HEADPHONES AND EARPHONES
CEI EN 61334-3-21 : 1997	DISTRIBUTION AUTOMATION USING DISTRIBUTION LINE CARRIER SYSTEMS - PART 3: MAINS SIGNALLING REQUIREMENTS - SECTION 21: MV PHASE-TO-PHASE ISOLATED CAPACITIVE COUPLING DEVICE
BS EN ISO 17409:2017	Electrically propelled road vehicles. Connection to an external electric power supply. Safety requirements
04/30039291 DC : DRAFT NOV 2004
BS EN 62689-1:2016	Current and voltage sensors or detectors, to be used for fault passage indication purposes General principles and requirements
BS IEC 62244 : 2006	RADIATION PROTECTION INSTRUMENTATION - INSTALLED RADIATION MONITORS FOR THE DETECTION OF RADIOACTIVE AND SPECIAL NUCLEAR MATERIALS AT NATIONAL BORDERS
PREN ISO 80601-2-55 : DRAFT 2009	MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS
03/306957 DC : DRAFT APR 2003	BS IEC 62022 - DETECTION OF GAMMA RADIATIONS CONTAINED IN RECYCLABLE OR NON-RECYCLABLE MATERIALS TRANSPORTED BY VEHICLES
GOST R ISO 8528-4 : 2005	RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 4: CONTROLGEAR AND SWITCHGEAR
CEI UNI EN 45510-2-5 : 2006	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS
BS PD IEC/TS 62603-1 : 2014	INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
01/202703 DC : DRAFT APRIL 2001	IEC 60092-354 ED.2 - ELECTRICAL INSULATION IN SHIPS - PART 354: SINGLE AND THREE CORE POWER CABLES WITH EXTRUDED SOLID INSULATION FOR RATED VOLTAGES 6 KV (UM EQUALS 7.2 KV) UP TO 30 KV (UM EQUALS 36 KV)
01/206938 DC : DRAFT OCT 2001	IEC 60255-27 ED.1.0 - MEASURING RELAYS AND EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS FOR MEASURING RELAYS AND PROTECTION EQUIPMENT
DD CLC/TS 50457-1:2008	Conductive charging for electric vehicles D.C. charging station
16/30318517 DC : 0	BS EN 60137 ED. 7.0 - INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V
I.S. EN 12977-5:2012	THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT
BS EN 60034-1:2010	Rotating electrical machines Rating and performance
I.S. HD 60364-7-722:2012	LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-722: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SUPPLY OF ELECTRIC VEHICLE
NF EN 60325 : 2004	RADIATION PROTECTION INSTRUMENTATION - ALPHA, BETA AND ALPHA/BETA (BETA ENERGY > 60 KEV) CONTAMINATION METERS AND MONITORS
BS EN 61599:2000	Videodisk players. Methods of measurement
BS EN 61268:1996	Alternating current static var-hour meters for reactive energy (classes 2 and 3)
03/316889 DC : DRAFT OCT 2003	EN 12098-5 - CONTROLS FOR HEATING SYSTEMS - PART 5: START-STOP SCHEDULERS FOR HEATING SYSTEMS
VDE 0414-1 : 2001	INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS
09/30150998 DC : 0
00/716716 DC : DRAFT NOV 2000
CSA C60044-7 : 2007 : R2011	INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS
BS EN 60909-0:2016	Short-circuit currents in three-phase a.c. systems Calculation of currents
UNI CEI EN 45510-2-7 : 2011	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
CSA C60044-7 : 2007	INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS
CSA C60044-1 : 2007 : R2011	INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS
CSA C60044-1 : 2007	INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS
I.S. EN 50533:2011	RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
CEI EN 61938 : 2014	MULTIMEDIA SYSTEMS - GUIDE TO THE RECOMMENDED CHARACTERISTICS OF ANALOGUE INTERFACES TO ACHIEVE INTEROPERABILITY
CSA C22.2 No. 60065 : 2016	AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
API 546 : 2008	BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER
PREN 50598-2 : DRAFT 2013	ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 2: ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS
CEI EN 61643-11 : 2014	LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS
I.S. EN 61869-4:2014	INSTRUMENT TRANSFORMERS - PART 4: ADDITIONAL REQUIREMENTS FOR COMBINED TRANSFORMERS
I.S. EN 50160:2010	VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS
ISO 14990-1:2016	Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 1: General requirements
EN 61810-1:2015/AC:2018-04	ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS (IEC 61810-1:2015/COR1:2018)
EN IEC 61869-11:2018	Instrument transformers - Part 11: Additional requirements for low-power passive voltage transformers
I.S. EN 60027-7:2010	LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 7: POWER GENERATION, TRANSMISSION AND DISTRIBUTION
CSA C61400-2 : 2008 : R2018	WIND TURBINES - PART 2: DESIGN REQUIREMENTS FOR SMALL WIND TURBINES
I.S. EN IEC 61938:2018	MULTIMEDIA SYSTEMS - GUIDE TO THE RECOMMENDED CHARACTERISTICS OF ANALOGUE INTERFACES TO ACHIEVE INTEROPERABILITY
BS EN 50470-1 : 2006	ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C)
UNE-EN 61822:2011	Electrical installations for lighting and beaconing of aerodromes - Constant current regulators
I.S. EN 60065:2014	AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
I.S. EN ISO 13628-5:2009	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS
EN 60204-1 : 2006 COR 2010	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
IEC TR 60092-370:2009	Electrical installations in ships - Part 370: Guidance on the selection of cables for telecommunication and data transfer including radio-frequency cables
I.S. EN ISO 80601-2-72:2015	MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS (ISO 80601-2-72:2015)
DIN EN 12098-1:2016-01 (Draft)	ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS - MODULES M3-5, 6, 7, 8
I.S. EN 62689-1:2016	CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS
I.S. HD 60364-5-534:2008	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - ISOLATION, SWITCHING AND CONTROL - CLAUSE 534: DEVICES FOR PROTECTION AGAINST OVERVOLTAGES
BIS IS/IEC 60730-1 : 1999(R2006)	AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 1: GENERAL REQUIREMENTS
UNE-IEC 60092-376:2017	Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V)
EN 50341-2-4:2016	Overhead electrical lines exceeding AC 1 kV - Part 2-4: National Normative Aspects (NNA) for Germany (based on EN 50341-1:2012)
CSA C22.2 No. 60601-1-12 : 2015	MEDICAL ELECTRICAL EQUIPMENT - PART 1-12: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS INTENDED FOR USE IN THE EMERGENCY MEDICAL SERVICES ENVIRONMENT
I.S. EN 60601-1-11:2015	MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT
BS EN 12977-5:2012	Thermal solar systems and components. Custom built systems Performance test methods for control equipment
IEC 61000-2-2:2002+AMD1:2017 CSV	Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
UNI EN ISO 80601-2-55 : 2012	MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS
I.S. EN 60761-1:2004	EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 1: GENERAL REQUIREMENTS
IEC TR 60755:2008	General requirements for residual current operated protective devices
17/30361327 DC : 0	BS EN 13487 - HEAT EXCHANGER - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS AND DRY COOLERS - SOUND MEASUREMENT
EN IEC 61938:2018	Multimedia systems - Guide to the recommended characteristics of analogue interfaces to achieve interoperability
CSA C22.2 No. 61058.1 : 2009	SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
CEI UNI EN 45510-2-3 : 2000	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-3: ELECTRICAL EQUIPMENT - STATIONARY BATTERIES AND CHARGERS
IEC 60669-1:2017	Switches for household and similar fixed-electrical installations - Part 1: General requirements
CEI EN 50533 : 2012	RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
IEC 60364-7-740:2000	Electrical installations of buildings - Part 7-740: Requirements for special installations or locations - Temporary electrical installations for structures, amusement devices and booths at fairgrounds, amusement parks and circuses
I.S. EN 61936-1:2010	POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES
IEC 61800-3:2017	Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
EN 12977-5:2018	Thermal solar systems and components - Custom built systems - Part 5: Performance test methods for control equipment
EN 12098-5:2017	Energy Performance of Buildings - Controls for heating systems - Part 5: Start-stop schedulers for heating systems - Modules M3-5,6,7,8
IEC 61892-2:2012	Mobile and fixed offshore units - Electrical installations - Part 2: System design
IEC 61810-5:1998	Electromechanical non-specified time all-or-nothing relays - Part 5: Insulation coordination
I.S. HD 60364-7-740:2006	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-740: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - TEMPORARY ELECTRICAL INSTALLATIONS FOR STRUCTURES, AMUSEMENT DEVICES AND BOOTHS AT FAIRGROUNDS, AMUSEMENT PARKS AND CIRCUSES
I.S. EN 60730-1:2016	AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS
IEC 60364-4-44:2007+AMD1:2015+AMD2:2018 CSV	Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances
IEC 61000-4-25:2001+AMD1:2012 CSV	Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems
I.S. EN 61069-1:2016	INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 1: TERMINOLOGY AND BASIC CONCEPTS
IEC TS 62749:2015	Assessment of power quality - Characteristics of electricity supplied by public networks
I.S. EN 61606-4:2007	AUDIO AND AUDIOVISUAL EQUIPMENT - DIGITAL AUDIO PARTS - BASIC MEASUREMENT METHODS OF AUDIO CHARACTERISTICS - PART 4: PERSONAL COMPUTER
I.S. EN 61822:2009	ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - CONSTANT CURRENT REGULATORS
IEC 61559-1:2009	Radiation protection instrumentation in nuclear facilities - Centralized systems for continuous monitoring of radiation and/or levels of radioactivity - Part 1: General requirements
IEC 62855:2016	Nuclear power plants - Electrical power systems - Electrical power systems analysis
I.S. EN 62020:1999	ELECTRICAL ACCESSORIES - RESIDUAL CURRENT MONITORS FOR HOUSEHOLD AND SIMILAR USES (RCMS)
I.S. HD 60364-7-708:2009	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-708: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - CARAVAN PARKS, CAMPING PARKS AND SIMILAR LOCATIONS
I.S. EN 60664-1:2007	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
I.S. EN 60398:2015	INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - GENERAL PERFORMANCE TEST METHODS
I.S. EN 61534-1:2011	POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS
IEC 62955:2018	Residual direct current detecting device (RDC-DD) to be used for mode 3 charging of electric vehicles
IEC 61131-2:2017	Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests
I.S. EN 60909-0:2016	SHORT-CIRCUIT CURRENTS IN THREE-PHASE A.C. SYSTEMS - PART 0: CALCULATION OF CURRENTS
I.S. EN 60439-1:2000	LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES
IEC 60364-7-721:2017	Low-voltage electrical installations - Part 7-721: Requirements for special installations or locations - Electrical installations in caravans and motor caravans
I.S. EN 60071-1:2006	INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES
IEC 60502-2:2014 RLV	Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U_m = 1,2 kV) up to 30 kV (U_m = 36 kV) – Part 2: Cables for rated voltages from 6 kV (U_m = 7,2 kV) up to 30 kV (U_m = 36 kV)
I.S. CLC/TS 50458:2006	CAPACITANCE GRADED OUTDOOR BUSHING 52 KV UP TO 420 KV FOR OIL IMMERSED TRANSFORMERS
IEC 61851-21-1:2017	Electric vehicle conductive charging system - Part 21-1 Electric vehicle on-board charger EMC requirements for conductive connection to AC/DC supply
I.S. EN 60268-7:2011	SOUND SYSTEM EQUIPMENT - PART 7: HEADPHONES AND EARPHONES
IEC 62640:2011+AMD1:2015 CSV	Residual current devices with or without overcurrent protection forsocket-outlets for household and similar uses
IEC 61558-1 REDLINE : 3ED 2017	SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 1: GENERAL REQUIREMENTS AND TESTS
IEC 60861:2006	Equipment for monitoring of radionuclides in liquid effluents and surface waters
EN 60358-1:2012	COUPLING CAPACITORS AND CAPACITOR DIVIDERS - PART 1: GENERAL RULES (IEC 60358-1:2012)
IEEE 45.3-2015	IEEE Recommended Practice for Shipboard Electrical Installations -- Systems Engineering
BS EN 50628:2016	Erection of electrical installations in underground mines
UNE-HD 62640:2016	Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses
IEC 60071-1:2006+AMD1:2010 CSV	Insulation co-ordination - Part 1: Definitions, principles and rules
IEC 62052-31:2015	Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests
95/204309 DC : DRAFT APRIL 1995	RESIDUAL CURRENT DEVICES WITHOUT INTEGRAL OVERCURRENT PROTECTION INCORPORATED IN OR ASSOCIATED WITH FIXED SOCKET-OUTLETS (SRCDS)
IEC 61534-1:2011+AMD1:2014 CSV	Powertrack systems - Part 1: General requirements
04/30123347 DC : DRAFT OCT 2004	IEC 61439-1 - LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
BS EN 60730-1:2011	Automatic electrical controls for household and similar use General requirements
IEC 60871-1:2014	Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General
IEC 62052-11:2003+AMD1:2016 CSV	Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment
15/30297990 DC : 0	BS EN 62840-2 ED 1.0 - ELECTRIC VEHICLE BATTERY SWAP SYSTEM - PART 2: SAFETY REQUIREMENTS
IEC 61439-1:2011	Low-voltage switchgear and controlgear assemblies - Part 1: General rules
IEC 60268-7:2010	Sound system equipment - Part 7: Headphones and earphones
BS EN 61851-1:2011	Electric vehicle conductive charging system General requirements
EN 60669-1:2018	Switches for household and similar fixed electrical installations - Part 1: General requirements
14/30238347 DC : 0	BS EN 60204-1 ED 6.0 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
ISO 80601-2-72:2015	Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients
00/246907 DC : DRAFT DEC 2000	BS EN 61980-1 - ELECTRICAL - ELECTRIC VEHICLE INDUCTIVE CHARGING SYSTEMS - PART 1: GENERAL REQUIREMENTS
UNE-EN 61009-1:2013	Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules
IEC 61293:1994	Marking of electrical equipment with ratings related to electrical supply - Safety requirements
UNE-HD 60364-5-534:2016	Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control - Clause 534: Devices for protection against transient overvoltages
IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV	Low-voltage fuses - Part 1: General requirements
BS EN 60898:1991	Specification for circuit-breakers for overcurrent protection for household and similar installations
DIN EN 12098-1:2013-10	ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS - MODULES M3-5, 6, 7, 8
IEC 61058-2-4:1995+AMD1:2003 CSV	Switches for appliances - Part 2-4: Particular requirements for independently mounted switches
03/100155 DC : DRAFT JAN 2003	IEC 60439-4 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 4: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR CONSTRUCTION SITES (ACS)
BS EN 61140 : 2002	PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT
IEC 62271-209:2007	High-voltage switchgear and controlgear - Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled and dry-type cable-terminations
EN 61000-4-25 : 2002 AMD 1 2012	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-25: TESTING AND MEASUREMENT TECHNIQUES - HEMP IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS (IEC 61000-4-25:2001/A1:2012)
IEC 60398:2015	Installations for electroheating and electromagnetic processing - General performance test methods
IEC TS 62840-1:2016	Electric vehicle battery swap system - Part 1: General and guidance
09/30204029 DC : 0	BS EN 61439-1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
IEC 62314:2006	Solid-state relays
IEC 61069-1:2016	Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts
IEC 62693:2013	Industrial electroheating installations - Test methods for infrared electroheating installations
IEC 61869-5:2011	Instrument transformers - Part 5: Additional requirements for capacitor voltage transformers
ISO 22188:2004	Monitoring for inadvertent movement and illicit trafficking of radioactive material
IEC 60704-1:2010	Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 1: General requirements
IEC 61268:1995	Alternating current static var-hour meters for reactive energy (classes 2 and 3)
IEC 61000-3-12:2011	Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase
IEC 60358-1:2012	Coupling capacitors and capacitor dividers - Part 1: General rules
15/30328159 DC : 0	BS EN 61558-1 - SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
BS ISO 19859:2016	Gas turbine applications. Requirements for power generation
IEC 60730-2-8:2000+AMD1:2002+AMD2:2015 CSV	Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated watervalves, including mechanical requirements
IEC 61400-1:2005+AMD1:2010 CSV	Wind turbines - Part 1: Design requirements
IEC 61000-2-4:2002	Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances
IEC 62040-3:2011	Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
IEC 61400-3:2009	Wind turbines - Part 3: Design requirements for offshore wind turbines
IEC 61000-2-12:2003	Electromagnetic compatibility (EMC) - Part 2-12: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems
IEC 62484:2010	Radiation protection instrumentation - Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material
ISO 13628-5:2009	Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals
IEC 60730-2-19:1997+AMD1:2000+AMD2:2007 CSV	Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements
BS EN 60898-1 : 2003	ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION
IEC 61000-4-7:2002+AMD1:2008 CSV	Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
IEC 60664-1:2007	Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
IEC 61606-4:2005	Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics - Part 4: Personal computer
11/30233799 DC : 0	BS EN 60730-1 ED5 - AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 1: GENERAL REQUIREMENTS
UNE-EN 60268-7:2013	Sound system equipment -- Part 7: Headphones and earphones
BS ISO 14990-1:2016	Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems General requirements
BS EN 60439-1:1999	Low-voltage switchgear and controlgear assemblies Type-tested and partially type-tested assemblies
IEC 61800-1:1997	Adjustable speed electrical power drive systems - Part 1: General requirments - Rating specifications for low voltage adjustables speed d.c. power drive systems
IEC 61439-1:2020	Low-voltage switchgear and controlgear assemblies - Part 1: General rules
BS EN 61936-1 : 2010	POWER INSTALLATIONS EXCEEDING 1 KV A.C - PART 1: COMMON RULES
IEC 61606:1997	Audio and audiovisual equipment - Digital audio parts - Basic methods of measurement of audio characteristics
IEC 60127-1:2006+AMD1:2011+AMD2:2015 CSV	Miniature fuses - Part 1: Definitions for miniature fuses andgeneral requirements for miniature fuse-links
BS EN 60204-33:2011	Safety of machinery. Electrical equipment of machines Requirements for semiconductor fabrication equipment
IEC 62488-1:2012	Power line communication systems for power utility applications - Part 1: Planning of analogue and digital power line carrier systems operating over EHV/HV/MV electricity grids
IEC 60846:2002	Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation
BS EN 61009-1 : 2012	RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES
15/30269927 DC : 0	BS EN 61851-1 ED 3.0 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM PART 1: GENERAL REQUIREMENTS
BS EN 28654:1993	Colours of gold alloys. Definition, range of colours and designation
BS EN 12098-2:2001	Controls for heating systems Optimum start-stop control equipment for hot water heating systems
UNE-EN 61936-1:2012	Power installations exceeding 1 kV a.c. -- Part 1: Common rules
IEC 61481-2:2014	Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1kV to 36 kV a.c.
IEC 60044-7:1999	Instrument transformers - Part 7: Electronic voltage transformers
IEC 61557-1:2007	Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements
IEC 60064:1993+AMD1:2000+AMD2:2002+AMD3:2005 CSV	Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements
16/30301661 DC : 0	BS EN 61439-1 ED3.0 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
BS 7822-1:1995	Insulation coordination for equipment within low-voltage systems Principles, requirements and tests
IEC 61347-1:2015 RLV	Lamp controlgear - Part 1: General and safety requirements
IEC 60870-2-1:1995	Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility
IEC 60325:2002	Radiation protection instrumentation - Alpha, beta and alpha/beta (beta energy >60 keV) contamination meters and monitors
UNE-HD 60364-7-721:2011	Low-voltage electrical installations - Part 7-721: Requirements for special installations or locations - Electrical installations in caravans and motor caravans
IEC 60027-7:2010	Letter symbols to be used in electrical technology - Part 7: Power generation, transmission and distribution
EN 61009-1:2012/A12:2016	RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES
IEC 61334-3-21:1996	Distribution automation using distribution line carrier systems - Part 3: Mains signalling requirements - Section 21: MV phase-to-phase isolated capacitive coupling device
UNE-IEC 61892-4:2016	Mobile and fixed offshore units - Electrical installations - Part 4: Cables
IEC 60761-1:2002	Equipment for continuous monitoring of radioactivity in gaseous effluents - Part 1: General requirements
AHRI 1060 (I-P) : 2014	PERFORMANCE RATING OF AIR-TO-AIR EXCHANGERS FOR ENERGY RECOVERY VENTILATION EQUIPMENT
EN 15500:2008	Control for heating, ventilating and air-conditioning applications - Electronic individual zone control equipment
EN ISO 80601-2-72:2015	Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (ISO 80601-2-72:2015)
EN ISO 13628-5:2009	Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals (ISO 13628-5:2009)
EN 45510-2-5:2002	Guide for procurement of power station equipment - Part 2-5: Electrical equipment - Motors
EN 45510-2-7:2002	Guide for procurement of power station equipment - Part 2-7: Electrical equipment - Switchgear and controlgear
I.S. EN 60871-1:2014	SHUNT CAPACITORS FOR A.C. POWER SYSTEMS HAVING A RATED VOLTAGE ABOVE 1000 V - PART 1: GENERAL
I.S. EN 62271-209:2007	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 209: CABLE CONNECTIONS FOR GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES ABOVE 52 KV - FLUID-FILLED AND EXTRUDED INSULATION CABLES - FLUID-FILLED AND DRY-TYPE CABLE-TERMINATIONS
AHRI 640 : 2005	PERFORMANCE RATING OF COMMERCIAL AND INDUSTRIAL HUMIDIFIERS
PREN 50341-1 : DRAFT 2012	OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
BS EN 61800-2:2015	Adjustable speed electrical power drive systems General requirements. Rating specifications for low voltage adjustable speed a.c. power drive systems
UNE-EN 61400-1:2006	Wind turbines - Part 1: Design requirements
BS EN 60601-1-11:2015	Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
UNE-EN 50533:2012	Railway applications - Three-phase train line voltage characteristics.
I.S. EN 60704-1:2010	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE NOISE - PART 1: GENERAL REQUIREMENTS (IEC 60704-1:2010 (EQV))
01/205932 DC : DRAFT AUG 2001	BS 8431 - CODE OF PRACTICE FOR ELECTRICAL STATIC METERING FOR SECONDARY OR SUB-METERING
PD IEC/TS 62840-1:2016	Electric vehicle battery swap system General and guidance
PD IEC/TR 60664-2-1:2011	Insulation coordination for equipment within low-voltage systems Application guide. Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing
02/124462 DC : DRAFT DEC 2002	BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
BIS IS/IEC 60071-1 : 2006	INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES
12/30260570 DC : 0	BS EN 50341-1 - OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
BS EN 12098-1:2017	Energy Performance of Buildings. Controls for heating systems Control equipment for hot water heating systems. Modules M3-5, 6, 7, 8
BS EN 50598-2 : 2014	ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 2: ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS
UNE-HD 60364-7-709:2011	Low-voltage electrical installations -- Part 7-709: Requirements for special installations or locations - Marinas and similar locations
BS EN 62488-2:2017	Power line communication systems for power utility applications Analogue power line carrier terminals or APLC
EN 61851-22:2002	Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station
CEI EN 62271-203 : 2013	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 203: GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES ABOVE 52 KV
AHRI 365 : 2002	COMMERCIAL AND INDUSTRIAL UNITARY AIR-CONDITIONING CONDENSING UNITS
EN 62020:1998/A1:2005	ELECTRICAL ACCESSORIES - RESIDUAL CURRENT MONITORS FOR HOUSEHOLD AND SIMILAR USES (RCMS)
CSA ISO/IEC 14762 : 2010	INFORMATION TECHNOLOGY - FUNCTIONAL SAFETY REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES)
CEI EN 61606-4 : 2007	AUDIO AND AUDIOVISUAL EQUIPMENT - DIGITAL AUDIO PARTS - BASIC MEASUREMENT METHODS OF AUDIO CHARACTERISTICS - PART 4: PERSONAL COMPUTER
13/30277696 DC : 0	BS EN 60398 - INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - GENERAL TEST METHODS
BS EN 15500-1:2017	Energy Performance of Buildings. Control for heating, ventilating and air conditioning applications Electronic individual zone control equipment. Modules M3-5, M4-5, M5-5
CSA C61000.2.2 : 2004	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-2: ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC LOW-VOLTAGE POWER SUPPLY SYSTEMS
11/30252941 DC : DRAFT SEP 2011	BS EN 60364-7-722 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-722: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SUPPLY OF ELECTRIC VEHICLE
BS EN 60398:2015	Installations for electroheating and electromagnetic processing. General performance test methods
BS EN 60694:1997	Common specifications for high-voltage switchgear and controlgear standards
IEC 60502:1994	Extruded solid dielectric insulated power cables for rated voltages from 1 kV up to 30 kV
PIMA IT7.402 : 0	AUDIOVISUAL SYSTEMS - SOUND SYSTEM EQUIPMENT - PART 15: PREFERRED MATCHING VALUES FOR THE INTERCONNECTION OF SOUND COMPONENTS
16/30345685 DC : 0	BS EN 60358-4 - COUPLING CAPACITORS AND CAPACITOR DIVIDERS - PART 4: DC AND AC SINGLE-PHASE CAPACITOR DIVIDERS
CSA C22.2 No. 60601-1-11 : 2015	MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT
IEC 60850:2014	Railway applications - Supply voltages of traction systems
PREN 50533 : DRAFT 2009	RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
PREN 17116-2 : DRAFT 2017	SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 2: BATCH DRYING TUMBLERS
DIN EN 61810-5 : 1999	ELECTROMECHANICAL NON-SPECIFIED TIME ALL-OR-NOTHING RELAYS - PART 5: INSULATION COORDINATION
BS EN 60027-7:2010	Letter symbols to be used in electrical technology Power generation, transmission and distribution
16/30269922 DC : 0	BS EN 61851-21-2 ED 1.0 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21-1: EMC REQUIRMENTS FOR OFF BOARD ELECTRIC VEHICLE CHARGING SYSTEMS
CSA C71.1 : 1999	INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES
UNI EN 15500 : 2008	CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT
07/30126760 DC : 0	IEC 61559-1 - RADIATION PROTECTION INSTRUMENTATION - INSTRUMENTATION AND CONTROL OF NUCLEAR FACILITIES - PART 1: CENTRALIZED SYSTEM FOR CONTINUOUS MONITORING OF RADIATION AND/OR LEVELS OF RADIOACTIVITY
VDE 0102-10 : 1998 COR 1 2010	SHORT-CIRCUIT CURRENTS - SHORT-CIRCUIT CURRENTS IN D.C. AUXILIARY INSTALLATIONS IN POWER PLANTS AND SUBSTATIONS - PART 1: CALCULATION OF SHORT-CIRCUIT CURRENTS
PD IEC TR 60909-1:2002	Short-circuit currents in three-phase a.c. systems Factors for the calculation of short-circuit currents according to IEC 60909-0
09/30203506 DC : 0	BS EN 61534-1 - POWER TRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS
BS EN 60846:2004	Radiation protection instrumentation. Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation
AHRI 620 : 2004	PERFORMANCE RATING OF SELF-CONTAINED HUMIDIFIERS FOR RESIDENTIAL APPLICATIONS
15/30323478 DC : 0	BS CISPR 15 - LIMITS AND METHOD OF MEAUREMENT OF RADIO DISTURBANCE CHARACTERISTICS OF ELECTRICAL LIGHTING AND SIMILAR EQUIPMENT
BS EN 62020:1999	Electrical accessories. Residual current monitors for household and similar uses (RCMs)
03/318201 DC : DRAFT NOV 2003	IEC 60502-2, ED.2 - POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESSORIES FOR RATED VOLTAGES FROM 1 KV (UM = 1,2 KV) UP TO 30 KV (UM = 36 KV) - PART 2: CABLES FOR RATED VOLTAGES FROM 6 KV (UM = 7,2 KV) UP TO 30 KV (UM = 36 KV)
BS EN 61557-1:2007	Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures General requirements
BS EN 12098-3:2013	Controls for heating systems Control equipment for electrical heating systems
BS EN 61643-11 : 2012	LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS
CSA C60044-7 : 2007 : R2016	INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS
BS EN 12098-5:2017	Energy Performance of Buildings. Controls for heating systems Start-stop schedulers for heating systems. Modules M3-5,6,7,8
08/30182672 DC : DRAFT MAY 2008	BS EN 60034-1 - ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
BS EN ISO 13628-5:2009	Petroleum and natural gas industries. Design and operation of subsea production systems Subsea umbilicals
BS EN 60094-3:1997	Magnetic tape sound recording and reproducing systems Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape
98/203654 DC : DRAFT JULY 1998
BS EN 60071-1 : 2006	INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES
PRHD 62640 : DRAFT 2014	RESIDUAL CURRENT DEVICES WITH OR WITHOUT OVERCURRENT PROTECTION FOR SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR USES (IEC 62640:2011, MODIFIED)
CSA E61131.2 :2006	PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
94/712993 DC : DRAFT NOV 1994	PREN 45511 - GUIDE FOR PROCUREMENT - ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
01/208953 DC : DRAFT DEC 2001	IEC 61936-3 ED.1 - POWER INSTALLATIONS EXCEEDING 1 KV AC - PART 3: PARTICULAR REQUIREMENTS FOR POWER GENERATION AND INDUSTRIAL INSTALLATIONS
16/30312315 DC : 0	BS EN ISO 80601-2-55 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS
CEI EN 61869-5 : 2012	INSTRUMENT TRANSFORMERS - PART 5: ADDITIONAL REQUIREMENTS FOR CAPACITOR VOLTAGE TRANSFORMERS
IEC 61938 : 3.0	MULTIMEDIA SYSTEMS - GUIDE TO THE RECOMMENDED CHARACTERISTICS OF ANALOGUE INTERFACES TO ACHIEVE INTEROPERABILITY
UNE-EN 50598-2:2015	Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 2: Energy efficiency indicators for power drive systems and motor starters
I.S. EN 60861:2008	EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS
BS EN 60761-1:2004	Equipment for continuous monitoring radioactivity in gaseous effluents General requirements
CEI EN 62052-11 : 2003	ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT
BS EN 61938:2013	Multimedia systems. Guide to the recommended characteristics of analogue interfaces to achieve interoperability
07/30174056 DC : 0	BS EN 60065 - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
HD 60364-7-721:2009/corrigendum:2010	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-721: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - ELECTRICAL INSTALLATIONS IN CARAVANS AND MOTOR CARAVANS
AHRI 300 : 2000	SOUND RATING AND SOUND TRANSMISSION LOSS OF PACKAGED TERMINAL EQUIPMENT
NF EN 50598-2 : 2015 AMD 1 2017	ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 2: ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS
I.S. EN 61000-3-12:2011	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW-VOLTAGE SYSTEMS WITH INPUT CURRENT > 16 A AND <= 75 A PER PHASE (IEC 61000-3-12:2011 (EQV))
08/30146763 DC : 0	IEC 62463 - RADIATION PROTECTION INSTRUMENTATION - X-RAY SYSTEMS FOR THE SCREENING OF PERSONS FOR SECURITY AND THE CARRYING OF ILLICIT ITEMS
EN 300 132-3 : 1.2.1	ENVIRONMENTAL ENGINEERING (EE); POWER SUPPLY INTERFACE AT THE INPUT TO TELECOMMUNICATIONS EQUIPMENT; PART 3: OPERATED BY RECTIFIED CURRENT SOURCE, ALTERNATING CURRENT SOURCE OR DIRECT CURRENT SOURCE UP TO 400 V
IEC 61938:2018 RLV	Multimedia systems - Guide to the recommended characteristics of analogue interfaces to achieve interoperability (GMT)
BIS IS 12640-1 : 2008	RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS FOR HOUSEHOLD AND SIMILAR USES - PART 1: CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION (RCCBS)
S.R. CLC/TR 50422:2013	GUIDE FOR THE APPLICATION OF THE EUROPEAN STANDARD EN 50160
CSA E61558.1 : 2012 : INC : UPD 1 : 2014	SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
CSA E61131.2 : 2006 : R2016	PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
DIN VDE 0636-10 : 1992	LOW-VOLTAGES FUSES; GENERAL REQUIREMENTS
I.S. EN 61800-9-2:2017	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 9-2: ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS
BS EN 61810-1:2015	Electromechanical elementary relays General and safety requirements
CLC/TS 50534:2010	Railway applications - Generic system architectures for onboard electric auxiliary power systems
DIN EN 15500-1 E : 2017	ENERGY PERFORMANCE OF BUILDINGS - CONTROL FOR HEATING, VENTILATING AND AIR CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5
NF EN 62022 : 2008	INSTALLED MONITORS FOR THE CONTROL AND DETECTION OF GAMMA RADIATIONS CONTAINED IN RECYCLABLE OR NON RECYCLABLE MATERIALS TRANSPORTED BY VEHICLES
NF EN 60761-1 : 2005	EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 1: GENERAL REQUIREMENTS
AHRI 325 : 1998	GROUND WATER-SOURCE HEAT PUMPS
CEI EN 61869-1 : 2010	INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
I.S. EN 60044-8:2002	INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
I.S. EN 60034-1:2010	ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
I.S. HD 60364-7-709:2009	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-709: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MARINAS AND SIMILAR LOCATIONS (IEC 60364-7-709:2007 (MOD))
EN 60601-1-11:2015	Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
I.S. EN 50341-2-4:2016	OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 2-4: NATIONAL NORMATIVE ASPECTS (NNA) FOR GERMANY (BASED ON EN 50341-1:2012)
S.R. HD 60364-1:2008	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: FUNDAMENTAL PRINCIPLES, ASSESSMENT OF GENERAL CHARACTERISTICS, DEFINITIONS
I.S. EN 60934:2001	CIRCUIT BREAKERS FOR EQUIPMENT (CBE) (IEC 60934:2000 (EQV))
EN 50470-1:2006	Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C)
I.S. EN 61000-2-4:2002	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-4: ENVIRONMENT - COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES
I.S. EN ISO 80601-2-55:2018	MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS (ISO 80601-2-55:2018)
IEEE 1826-2012	IEEE Standard for Power Electronics Open System Interfaces in Zonal Electrical Distribution Systems Rated Above 100 kW
S.R. HD 60364-4-443:2016	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-44: PROTECTION FOR SAFETY - PROTECTION AGAINST VOLTAGE DISTURBANCES AND ELECTROMAGNETIC DISTURBANCES - CLAUSE 443: PROTECTION AGAINST TRANSIENT OVERVOLTAGES OF ATMOSPHERIC ORIGIN OR DUE TO SWITCHING
IEEE 551 : 2006	CALCULATING SHORT-CIRCUIT CURRENTS IN INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
UNE-HD 60364-7-708:2018	Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations
S.R. HD 60364-7-740:2006	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-740: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - TEMPORARY ELECTRICAL INSTALLATIONS FOR STRUCTURES, AMUSEMENT DEVICES AND BOOTHS AT FAIRGROUNDS, AMUSEMENT PARKS AND CIRCUSES
I.S. EN 60137:2017	INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V
EN 12098-3:2017	Energy Performance of Buildings - Controls for heating systems - Part 3: Control equipment for electrical heating systems - Modules M3-5,6,7,8
I.S. EN IEC 63044-3:2018	HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 3: ELECTRICAL SAFETY REQUIREMENTS
BS IEC 61225:2005	Nuclear power plants. Instrumentation and control systems important to safety. Requirements for electrical supplies
CEI UNI EN 45510-2-2 : 1999	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-2: ELECTRICAL EQUIPMENT - UNINTERRUPTIBLE POWER SUPPLIES
UNE-IEC 60092-354:2015	Electrical installations in ships - Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (U_m = 7,2 kV) up to 30 kV (U_m = 36 kV)
BS EN 62052-11 : 2003	ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TEST AND TEST CONDITIONS - PART 11: METERING EQUIPMENT (IEC 62052-11:2003)
I.S. EN 50598-2:2014	ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 2: ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS
I.S. EN 61000-4-7:2002	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-7: TESTING AND MEASUREMENT TECHNIQUES - GENERAL GUIDE ON HARMONICS AND INTERHARMONICS MEASUREMENTS AND INSTRUMENTATION, FOR POWER SUPPLY SYSTEMS AND EQUIPMENT CONNECTED THERETO
I.S. EN 62052-31:2016	ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS AND TESTS
TR 103 352 : 1.1.1	SATELLITE EARTH STATIONS AND SYSTEMS (SES); ENERGY EFFICIENCY OF SATELLITE BROADBAND NETWORK
ISO/IEC 14762:2009	Information technology Functional safety requirements for Home and Building Electronic Systems (HBES)
BS EN 50160 : 2010	VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS
CEI EN 60137 : 2009	INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V
IEC 62463:2010	Radiation protection instrumentation - X-ray systems for the screening of persons for security and the carrying of illicit items
IEC 62909-1:2017	Bi-directional grid connected power converters - Part 1: General requirements
UNE-EN 60974-1:2013	Arc welding equipment - Part 1: Welding power sources
IEC 60364-7-708:2017	Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations
I.S. EN 61869-5:2011	INSTRUMENT TRANSFORMERS - PART 5: ADDITIONAL REQUIREMENTS FOR CAPACITOR VOLTAGE TRANSFORMERS (IEC 61869-5:2011)
BS IEC 61892-2:2012	Mobile and fixed offshore units. Electrical installations System design
17/30356400 DC : 0	BS EN 17116-4 - SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 4: WASHER-EXTRACTORS
CSA E1008.1 : 0	RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES
I.S. EN 61096:1993	METHODS OF MEASURING THE CHARACTERISTICS OF REPRODUCING EQUIPMENT FOR DIGITAL AUDIO COMPACT DISCS
I.S. EN 61400-3:2009	WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES
NF EN 62244 : 2011	RADIATION PROTECTION INSTRUMENTATION - INSTALLED RADIATION MONITORS FOR THE DETECTION OF RADIOACTIVE AND SPECIAL NUCLEAR MATERIALS AT NATIONAL BORDERS
NF EN 60065 : 2015 AMD 11 2018	AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
NF EN 60034-1 : 2011	ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
I.S. HD 62640:2015	RESIDUAL CURRENT DEVICES WITH OR WITHOUT OVERCURRENT PROTECTION FOR SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR USES
CEI EN 61800-4 : 2003	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 4: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR A/C/ POWER DRIVE SYSTEMS ABOVE 1000 V A.C. AND NOT EXCEEDING 35 KV
IEC 60502-1:2004+AMD1:2009 CSV	Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U_m = 1,2 kV) up to 30 kV(U_m = 36 kV) - Part 1: Cables for rated voltages of 1 kV (U_m = 1,2 kV) and 3 kV (U_m = 3,6 kV)
EN 50160 : 2010 AMD 1 2015	VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS
IEC 60034-1:2017	Rotating electrical machines - Part 1: Rating and performance
I.S. TR 50422:2004	GUIDE FOR THE APPLICATION OF THE EUROPEAN STANDARD EN 50160
IEC 62840-2:2016	Electric vehicle battery swap system - Part 2: Safety requirements
IEC 60092-376:2017	Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V)
IEC 60730-1:2013+AMD1:2015 CSV	Automatic electrical controls - Part 1: General requirements
I.S. EN 61009-1:2012	RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES
IEC 61058-1:2016	Switches for appliances - Part 1: General requirements
I.S. EN 60204-33:2011	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
I.S. EN 62314:2006	SOLID-STATE RELAYS
S.R. CLC/TS 50534:2010	RAILWAY APPLICATIONS - GENERIC SYSTEM ARCHITECTURES FOR ONBOARD ELECTRIC AUXILIARY POWER SYSTEMS
IEC 61643-11:2011	Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods
I.S. EN 62271-203:2012	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 203: GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES ABOVE 52 KV (IEC 62271-203:2011 (EQV))
I.S. EN 62271-1:2017	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
I.S. EN 61800-2:2015	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 2: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED A.C. POWER DRIVE SYSTEMS
I.S. EN 61800-4:2003	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 4: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR A.C. POWER DRIVE SYSTEMS ABOVE 1000 V A.C. AND NOT EXCEEDING 35 KV
IEC 61822:2009	Electrical installations for lighting and beaconing of aerodromes - Constant current regulators
IEC 61204:1993+AMD1:2001 CSV	Low-voltage power supply devices, d.c. output - Performance characteristics
I.S. HD 384.4.41:1998	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 4: PROTECTION FOR SAFETY - CHAPTER 41: PROTECTION AGAINST ELECTRIC SHOCK
IEC PAS 60044-5:2002	Instrument transformers - Part 5: Capacitor voltage transformers
IEC 61869-1:2007	Instrument transformers - Part 1: General requirements
IEC 60137 REDLINE : 7ED 2017	INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V
I.S. EN 61938:2013	MULTIMEDIA SYSTEMS - GUIDE TO THE RECOMMENDED CHARACTERISTICS OF ANALOGUE INTERFACES TO ACHIEVE INTEROPERABILITY (IEC 61938:2013 (EQV))
IEC TS 62603-1:2014	Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications
EN 61800-3 : 2004 AMD 1 2012	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004/A1:2011)
ISO 17409:2015	Electrically propelled road vehicles Connection to an external electric power supply Safety requirements
UNE-EN 61439-1:2012	Low-voltage switchgear and controlgear assemblies - Part 1: General rules
IEC 61660-1:1997	Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents
IEC 61140:2016	Protection against electric shock - Common aspects for installation and equipment
IEC 60204-32:2008	Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
BS EN 45510-2-2:1999	Guide for the procurement of power station equipment. Electrical equipment Uninterruptible power supplies - Uninterruptible power supplies for power plants
EN ISO 17409:2017	Electrically propelled road vehicles - Connection to an external electric power supply - Safety requirements (ISO 17409:2015, Corrected version 2015-12-15)
IEC 61599:1999	Videodisk players - Methods of measurement
14/30244780 DC : 0	BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
IEC 60934:2000+AMD1:2007+AMD2:2013 CSV	Circuit-breakers for equipment (CBE)
IEC 62020:1998+AMD1:2003 CSV	Electrical accessories - Residual current monitors for household and similar uses (RCMs)
BS EN 60204-1 : 2006	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
BS EN ISO 14224:2016	Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment
BS EN 60204-32:2008	Safety of machinery. Electrical equipment of machines Requirements for hoisting machines
DIN EN 12514-1:2009-06 (Draft)	INSTALLATIONS FOR OIL SUPPLY SYSTEMS FOR OIL BURNERS - PART 1: SAFETY REQUIREMENTS AND TESTS - PARTS, OIL FEED PUMPS, CONTROL AND SAFETY DEVICES, SUPPLY TANKS
IEC 60044-2:1997+AMD1:2000+AMD2:2002 CSV	Instrument transformers - Part 2 : Inductive voltage transformers
IEC 62271-203:2011	High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
DIN VDE 0805 : 1990 AMD 1 1991	SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT INCLUDING ELECTRICAL BUSINESS EQUIPMENT
EN 62488-1:2013	Power line communication systems for power utility applications - Part 1: Planning of analogue and digital power line carrier systems operating over EHV/HV/MV electricity grids
EN 61334-3-21:1996	Distribution automation using distribution line carrier systems - Part 3: Mains signaling requirements - Section 21: MV phase-to-phase isolated capacitive coupling device
EN 61140:2016	Protection against electric shock - Common aspects for installation and equipment
EN 61810-5 : 1998	ELECTROMECHANICAL NON-SPECIFIED TIME ALL-OR-NOTHING RELAYS - INSULATION COORDINATION
HD 428.1 S1:1992/AC:2011	THREE PHASE OIL-IMMERSED DISTRIBUTION TRANSFORMERS, 50 HZ, FROM 50 TO 2500 KVA WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 1: GENERAL REQUIREMENTS AND REQUIREMENTS FOR TRANSFORMERS WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 24 KV
EN 61036:1996/A1:2000	ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
EN 60870-2-1 : 1996	Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility
BS 5733(2010) : 2010	GENERAL REQUIREMENTS FOR ELECTRICAL ACCESSORIES - SPECIFICATION
EN 61606-1:2009	Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics - Part 1: General
EN 61606 : 1997	AUDIO AND AUDIOVISUAL EQUIPMENT - DIGITAL AUDIO PARTS - BASIC METHODS OF MEASUREMENT OF AUDIO CHARACTERISTICS
EN 50308 : 2004 COR 2005	WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE
EN 61069-1:2016	Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts
HD 60364-4-443:2016	Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances - Clause 443: Protection against transient overvoltages of atmospheric origin or due to switching
BS 7671(2008) : 2008	REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS
EN 60934:2001/A2:2013	CIRCUIT BREAKERS FOR EQUIPMENT (CBE) (IEC 60934:2000/A2:2013)
EN 60044-1:1999/A2:2003	INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS
EN 60742:1995	Isolating transformers and safety isolating transformers - Requirements
EN 61869-1:2009	Instrument transformers - Part 1: General requirements
EN 60027-7:2010	Letter symbols to be used in electrical technology - Part 7: Power generation, transmission and distribution
DIN EN 12157:1999-08	ROTODYNAMIC PUMPS - COOLANT PUMPS UNITS FOR MACHINE TOOLS - NOMINAL FLOW RATE, DIMENSIONS
OVE/ONORM EN 62020 : AMD 1 2006	ELECTRICAL ACCESSORIES - RESIDUAL CURRENT MONITORS FOR HOUSEHOLD AND SIMILAR USES (RCMS)
EN 61481-2:2014	Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c.
DIN EN 12977-5:2012-06	THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT
EN 60325:2004	Radiation protection instrumentation - Alpha, beta and alpha/beta (beta energy > 60 keV) contamination meters and monitors
HD 60364-7-740:2006/A11:2017	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-740: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - TEMPORARY ELECTRICAL INSTALLATIONS FOR STRUCTURES, AMUSEMENT DEVICES AND BOOTHS AT FAIRGROUNDS, AMUSEMENT PARKS AND CIRCUSES
EN 60204-32:2008	Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
EN 60127-1:2006/A2:2015	MINIATURE FUSES - PART 1: DEFINITIONS FOR MINIATURE FUSES AND GENERAL REQUIREMENTS FOR MINIATURE FUSE-LINKS
EN 62052-11:2003/A1:2017/AC:2018-04	ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT (IEC 62052-11:2003/A1:2016/COR1:2018)
EN 62022 : 2007	INSTALLED MONITORS FOR THE CONTROL AND DETECTION OF GAMMA RADIATIONS CONTAINED IN RECYCLABLE OR NON-RECYCLABLE MATERIALS TRANSPORTED BY VEHICLES
CEN/TS 12977-5:2010	Thermal solar systems and components - Custom built systems - Part 5: Performance test methods for control equipment
EN 50512:2009	Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS)
EN 61800-4:2003	Adjustable speed electrical power drive systems - Part 4: General requirements - Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV
EN 60846:2004	Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation
EN 60439-1:1999/A1:2004	LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES
EN 61869-5:2011	Instrument transformers - Part 5: Additional requirements for capacitor voltage transformers
EN 50065-4-1:2001	Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-1: Low voltage decoupling filters - Generic specification
EN 60034-1:2010/corrigendum Oct. 2010	ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
EN 62271-203:2012	High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
EN 60204-33:2011	Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment
EN 60861:2008	Equipment for monitoring of radionuclides in liquid effluents and surface waters
EN 60398:2015	Installations for electroheating and electromagnetic processing - General performance test methods
EN 50628:2016	Erection of electrical installations in underground mines
EN 50598-2:2014/A1:2016	ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 2: ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS
EN 50533 : 2011 AMD 1 2016	RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
EN 60974-1:2012	Arc welding equipment - Part 1: Welding power sources
EN 60044-8:2002	Instrument transformers - Part 8: Electronic current transformers
EN 61557-1:2007	Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements
EN 50463:2007	Railway applications - Energy measurement on board trains
EN 60871-1:2014	Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General
CLC/TS 61643-12 : 2009	LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 12: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER DISTRIBUTION SYSTEMS - SELECTION AND APPLICATION PRINCIPLES
EN 61204:1995/A1:2001	LOW-VOLTAGE POWER SUPPLY DEVICES, D.C. OUTPUT - PERFORMANCE CHARACTERISTICS (IEC 61204:1993, MODIFIED + A1:2001)
EN 61098:2007	Radiation protection instrumentation - Installed personnel surface contamination monitoring assemblies
EN 60044-2:1999/A2:2003	INSTRUMENT TRANSFORMERS - PART 2: INDUCTIVE VOLTAGE TRANSFORMERS
EN 61000-4-7:2002/A1:2009	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-7: TESTING AND MEASUREMENT TECHNIQUES - GENERAL GUIDE ON HARMONICS AND INTERHARMONICS MEASUREMENTS AND INSTRUMENTATION, FOR POWER SUPPLY SYSTEMS AND EQUIPMENT CONNECTED THERETO (IEC 61000-4-7:2002/A1:2008)
EN 62756-1:2015	Digital load side transmission lighting control (DLT) - Part 1: Basic requirements
DIN VDE 0110-1 : 1997	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
HD 384.7.754 : 2005	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SECTION 754: ELECTRICAL INSTALLATIONS IN CARAVANS AND MOTOR-CARAVANS
EN 61660-1:1997	Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents
EN 62314 : 2006	SOLID-STATE RELAYS
EN 60761-1:2004	Equipment for continuous monitoring radioactivity in gaseous effluents - Part 1: General requirements
EN 60094-3:1996/A3:1996	MAGNETIC TAPE SOUND RECORDING AND REPRODUCING SYSTEMS - PART 3: METHODS OF MEASURING THE CHARACTERISTICS OF RECORDING AND REPRODUCING EQUIPMENT FOR SOUND ON MAGNETIC TAPE
HD 60364-4-442:2012	Low-voltage electrical installations - Part 4-442: Protection for safety - Protection of low-voltage installations against temporary overvoltages due to earth faults in the high-voltage system and due to faults in the low voltage system
DIN VDE 0660-501 : 1992	SWITCHGEAR AND CONTROLGEAR; LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 4: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR CONSTRUCTION SITES (ACS)
BS 415(1998) : 1998	AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
UNE-HD 60364-5-557:2014	Low-voltage electrical installations - Part 5-557: Selection and erection of electrical equipment - Auxiliary circuits
BS 6288-3(1990) : 1990 AMD 9286	MAGNETIC TAPE SOUND RECORDING AND REPRODUCING SYSTEMS - METHODS OF MEASURING THE CHARACTERISTICS OF RECORDING AND REPRODUCING EQUIPMENT FOR SOUND ON MAGNETIC TAPE
API RP 17Z:2024	Medium Voltage Equipment Used on Subsea Production Systems
BS 88-1(2007) : 2007	LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS

Standards Referencing This Book - (Show below) - (Hide below)

AS 61869.4:2021	Instrument transformers Additional requirements for combined transformers (IEC 61869-4:2013 (ED.1.0) MOD)
IEC 60050-601:1985	International Electrotechnical Vocabulary (IEV) - Part 601: Generation, transmission and distribution of electricity - General
AS/NZS IEC 60092.376:2020	Electrical installations in ships Cables for control and instrumentation circuits 150/250 V (300 V)
AS 61869.11:2021	Instrument transformers Additional requirements for low-power passive voltage transformers (IEC 61869-11:2017 (ED 1.0) MOD)
AS 61869.5:2021	Instrument transformers Additional requirements for capacitor voltage transformers (IEC 61869-5:2011 (ED 1.0) MOD)
AS/NZS 60092.354:2020	Electrical installations in ships Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) (IEC 60092-354:2014 (ED.3.0) MOD)
AS 61869.3:2021	Instrument transformers Additional requirements for inductive voltage transformers (IEC 61869-3:2011 (ED.1.0) MOD)
AS/NZS IEC 60092.353:2020	Electrical installations in ships Power cables for rated voltages 1 kV and 3 kV
IEC 60364-5-52:2009	Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Add To Cart

Product Format

Quantity

Buy now

Add to cart

Create account