• EN 60038 : 2011

    Current The latest, up-to-date edition.

    CENELEC STANDARD VOLTAGES (IEC 60038:2009, MODIFIED)

    Available format(s): 

    Language(s): 

    Published date:  07-10-2011

    Publisher:  European Committee for Standards - Electrical

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Standard voltages
    Annex ZB (informative) - A-deviations
    Bibliography

    Abstract - (Show below) - (Hide below)

    Defines standard voltage values, which are intended to serve as preferential values for the nominal voltage of electrical supply systems, and as reference values for equipment and system design.

    General Product Information - (Show below) - (Hide below)

    Committee TC 8X
    Development Note Supersedes HD 472. (10/2011)
    Document Type Standard
    Publisher European Committee for Standards - Electrical
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS EN 60601-1-11:2015 (published 2015-06) Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
    17/30356403 DC : 0 BS EN 17116-3 - SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 3: CONTINUOUS TUNNEL WASHER
    PREN 12098-5 : DRAFT 2015 CONTROLS FOR HEATING SYSTEMS - PART 5: START-STOP SCHEDULERS FOR HEATING SYSTEMS - MODULES M3-5, 6, 7, 8
    PREN 13487 : DRAFT 2017 HEAT EXCHANGER - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS AND DRY COOLERS - SOUND MEASUREMENT
    BS EN 61851-21-1:2017 Electric vehicle conductive charging system Electric vehicle on-board charger EMC requirements for conductive connection to an AC/DC supply
    UNE-EN 50341-1:2017 Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications
    BS EN 61800-2:2015 (published 2015-10) Adjustable speed electrical power drive systems General requirements. Rating specifications for low voltage adjustable speed a.c. power drive systems
    DIN EN 16479 E : 2014 WATER QUALITY - PERFORMANCE REQUIREMENTS AND CONFORMITY TEST PROCEDURES FOR WATER MONITORING EQUIPMENT - AUTOMATED SAMPLING DEVICES (SAMPLERS) FOR WATER AND WASTE WATER
    I.S. EN 62756-1:2015 DIGITAL LOAD SIDE TRANSMISSION LIGHTING CONTROL - PART 1: BASIC REQUIREMENTS
    EN 61008-1:2012/A12:2017 RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES (IEC 61008-1:2010, MODIFIED)
    BS EN 60358-1:2012 (published 2014-03) Coupling capacitors and capacitor dividers General rules
    I.S. EN 60358-1:2012 COUPLING CAPACITORS AND CAPACITOR DIVIDERS - PART 1: GENERAL RULES (IEC 60358-1:2012 (EQV))
    TS 102 121 : 1.3.1 ENVIRONMENTAL ENGINEERING (EE); POWER DISTRIBUTION TO TELECOMMUNICATIONS AND DATACOM (ICT) EQUIPMENT
    CEI EN 60034-30-1 : 2015 ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE)
    CEI EN 62244 : 2012 RADIATION PROTECTION INSTRUMENTATION - INSTALLED RADIATION MONITORS FOR THE DETECTION OF RADIOACTIVE AND SPECIAL NUCLEAR MATERIALS AT NATIONAL BORDERS
    CEI CLC/TR 50422 : 2015 GUIDE FOR THE APPLICATION OF THE EUROPEAN STANDARD EN 50160
    BS EN 61869-5 : 2011 INSTRUMENT TRANSFORMERS - PART 5: ADDITIONAL REQUIREMENTS FOR CAPACITOR VOLTAGE TRANSFORMERS
    BS EN 15500-1:2017 Energy Performance of Buildings. Control for heating, ventilating and air conditioning applications Electronic individual zone control equipment. Modules M3-5, M4-5, M5-5
    BS EN 62689-1:2016 (published 2017-01) Current and voltage sensors or detectors, to be used for fault passage indication purposes General principles and requirements
    BS EN 50588-1 : 2017 MEDIUM POWER TRANSFORMERS 50 HZ, WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 1: GENERAL REQUIREMENTS
    EN 12098-3:2017 ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS - MODULES M3-5, 6, 7, 8
    EN 62689-1 : 2016 CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS (IEC 62689-1:2016)
    CEI EN 61869-3 : 2012 INSTRUMENT TRANSFORMERS - PART 3: ADDITIONAL REQUIREMENTS FOR INDUCTIVE VOLTAGE TRANSFORMERS
    17/30356406 DC : 0 BS EN 17116-2 - SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 2: BATCH DRYING TUMBLERS
    UNE-EN 61008-1:2013 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules
    BS EN 61000-4-25 : 2002 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-25: TESTING AND MEASUREMENT TECHNIQUES - HEMP IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS
    VDI 3805-24 : DRAFT 2017 PRODUCT DATA EXCHANGE IN THE BUILDING SERVICES - ACTUATORS USED IN BUILDING SERVICES
    EN 61851-21-1:2017/AC:2017-11 ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21-1: ELECTRIC VEHICLE ON-BOARD CHARGER EMC REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN AC/DC SUPPLY (IEC 61851-21-1:2017)
    15/30331522 DC : 0 BS EN 12098-1 - CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS - MODULES M3-5, 6, 7, 8
    CLC/TS 62603-1 : 2014 Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications
    16/30342855 DC : 0 BS EN 17038-2 - PUMPS - METHODS OF QUALIFICATION AND VERIFICATION OF THE ENERGY EFFICIENCY INDEX FOR ROTODYNAMIC PUMP UNITS - PART 2: TESTING AND CALCULATION OF ENERGY EFFICIENCY INDEX (EEI) OF SINGLE PUMP UNITS
    PREN 12098-3 : DRAFT 2015 CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS - MODULES M3-5, 6, 7, 8
    BS EN 16479:2014 (published 2014-07) Water quality. Performance requirements and conformity test procedures for water monitoring equipment. Automated sampling devices (samplers) for water and waste water
    CLC/TR 50422:2013 GUIDE FOR THE APPLICATION OF THE EUROPEAN STANDARD EN 50160
    EN 61800-2:2015 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 2: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED A.C. POWER DRIVE SYSTEMS (IEC 61800-2:2015)
    S.R. HD 60364-5-534:2016 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - ISOLATION, SWITCHING AND CONTROL - CLAUSE 534: DEVICES FOR PROTECTION AGAINST TRANSIENT OVERVOLTAGES
    I.S. EN 61810-1:2015 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS
    14/30316181 DC : 0 BS EN 50628 - ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES
    11/30246864 DC : 0 BS EN 12098-3 - CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS
    BS PD CLC/TS 62603-1 : 2014 INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
    I.S. EN 12977-5:2012 THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT
    BS EN 60398:2015 Installations for electroheating and electromagnetic processing. General performance test methods
    11/30235383 DC : 0 BS EN 12098-1 - CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS
    S.R. CLC/TS 62603-1:2014 INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINE FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
    UNE-EN 61869-4:2017 Instrument transformers - Part 4: Additional requirements for combined transformers
    I.S. EN 61869-3:2011 INSTRUMENT TRANSFORMERS - PART 3: ADDITIONAL REQUIREMENTS FOR INDUCTIVE VOLTAGE TRANSFORMERS (IEC 61869-3:2011)
    BS EN 61000-3-12 : 2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW-VOLTAGE SYSTEMS WITH INPUT CURRENT > 16 A AND <= 75 A PER PHASE
    EN IEC 61058-1 : 2018 SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS (IEC 61058-1:2016)
    BS EN 61534-1 : 2011 POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS
    BS EN 61481-2:2014 LIVE WORKING - PHASE COMPARATORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES FROM 1 KV TO 36 KV A.C.
    S.R. CLC/TR 50422:2013 GUIDE FOR THE APPLICATION OF THE EUROPEAN STANDARD EN 50160
    HD 60364-7-708:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-708: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - CARAVAN PARKS, CAMPING PARKS AND SIMILAR LOCATIONS (IEC 60364-7-708:2017)
    15/30331510 DC : 0 BS EN 12098-3 - CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS - MODULES M3-5, 6, 7, 8
    I.S. EN 61869-5:2011 INSTRUMENT TRANSFORMERS - PART 5: ADDITIONAL REQUIREMENTS FOR CAPACITOR VOLTAGE TRANSFORMERS (IEC 61869-5:2011)
    S.R. HD 60364-7-708:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-708: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - CARAVAN PARKS, CAMPING PARKS AND SIMILAR LOCATIONS
    PREN 17116-2 : DRAFT 2017 SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 2: BATCH DRYING TUMBLERS
    UNE-EN 61869-3:2012 Instrument transformers - Part 3: Additional requirements for inductive voltage transformers
    13/30280187 DC : 0 BS EN 50598-2 - ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 2: ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS
    UNE-EN 60065:2015 Audio, video and similar electronic apparatus - Safety requirements
    I.S. EN 50588-1:2017 MEDIUM POWER TRANSFORMERS 50 HZ, WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 1: GENERAL REQUIREMENTS
    I.S. EN 61008-1:2012&A1:2014/ac&A2:2014...A12:2017 RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES
    I.S. EN 60034-30-1:2014 ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE)
    15/30331519 DC : 0 BS EN 15500-1 - CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5
    BS EN 62756-1:2015 (published 2015-08) Digital load side transmission lighting control Basic requirements
    BS EN 60601-1-12:2015 (published 2015-06) Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment
    CEI EN 62488-2 : 1ED 2018 POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC
    DIN EN 16479:2014-09 WATER QUALITY - PERFORMANCE REQUIREMENTS AND CONFORMITY TEST PROCEDURES FOR WATER MONITORING EQUIPMENT - AUTOMATED SAMPLING DEVICES (SAMPLERS) FOR WATER AND WASTE WATER
    PREN 17038-3 : DRAFT 2017 PUMPS - ROTODYNAMIC PUMPS - ENERGY EFFICIENCY INDEX - METHODS OF QUALIFICATION AND VERIFICATION - PART 3: TESTING AND CALCULATION OF ENERGY EFFICIENCY INDEX (EEI) OF BOOSTER SETS
    PREN 50171 : DRAFT 2013 CENTRAL SAFETY POWER SUPPLY SYSTEMS
    BS EN 61869-3 : 2011 INSTRUMENT TRANSFORMERS - PART 3: ADDITIONAL REQUIREMENTS FOR INDUCTIVE VOLTAGE TRANSFORMERS
    13/30251809 DC : 0 BS EN 50171 - CENTRAL SAFETY POWER SUPPLY SYSTEMS
    UNE-EN 61400-2:2015 Wind turbines - Part 2: Small wind turbines
    BS EN 60034-30-1 : 2014 ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE)
    BS EN 61869-4:2014 Instrument transformers Additional requirements for combined transformers
    CEI EN 61534-1 : 2012 POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS
    BS EN 12098-3:2013 ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS - MODULES M3-5, 6, 7, 8
    BS EN 12098-5:2017 Energy Performance of Buildings. Controls for heating systems Start-stop schedulers for heating systems. Modules M3-5,6,7,8
    15/30331525 DC : 0 BS EN 12098-5 - CONTROLS FOR HEATING SYSTEMS - PART 5: START-STOP SCHEDULERS FOR HEATING SYSTEMS - MODULES M3-5, 6, 7, 8
    BS EN IEC 63044-3:2018 Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Electrical safety requirements
    I.S. EN 50628:2016 ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES
    CEI EN 62689-1 : 1ED 2017 CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS
    BS EN 60065 : 2014 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014, MODIFIED)
    CEI EN 61869-5 : 2012 INSTRUMENT TRANSFORMERS - PART 5: ADDITIONAL REQUIREMENTS FOR CAPACITOR VOLTAGE TRANSFORMERS
    UNE-EN 61534-1:2011 Powertrack systems -- Part 1: General requirements
    BS EN 61938 : 2013 MULTIMEDIA SYSTEMS - GUIDE TO THE RECOMMENDED CHARACTERISTICS OF ANALOGUE INTERFACES TO ACHIEVE INTEROPERABILITY
    I.S. EN 12098-3:2017 ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS - MODULES M3-5, 6, 7, 8
    I.S. EN 61000-3-12:2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW-VOLTAGE SYSTEMS WITH INPUT CURRENT > 16 A AND <= 75 A PER PHASE (IEC 61000-3-12:2011 (EQV))
    I.S. EN 61140:2016 PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT
    BS EN 60909-0:2016 SHORT-CIRCUIT CURRENTS IN THREE-PHASE A.C. SYSTEMS - PART 0: CALCULATION OF CURRENTS
    PREN 12098-1 : DRAFT 2015 CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS - MODULES M3-5, 6, 7, 8
    BS EN 12098-1:2017 Energy Performance of Buildings. Controls for heating systems Control equipment for hot water heating systems. Modules M3-5, 6, 7, 8
    S.R. HD 60364-5-557:2013 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-557: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - AUXILIARY CIRCUITS
    EN 61439-1:2011 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
    I.S. EN 61800-9-2:2017 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 9-2: ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS
    DIN EN 15500-1 E : 2017 ENERGY PERFORMANCE OF BUILDINGS - CONTROL FOR HEATING, VENTILATING AND AIR CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5
    I.S. EN 12098-1:2017 ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS - MODULES M3-5, 6, 7, 8
    17/30325894 DC : 0 BS EN 17075 - WATER QUALITY - GENERAL REQUIREMENTS AND PERFORMANCE TEST PROCEDURES FOR WATER MONITORING EQUIPMENT - MEASURING DEVICES
    BS EN 61008-1 : 2012 RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES (IEC 61008-1:2010, MODIFIED)
    CEI EN 61810-1 : 2016 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS
    CEI EN 61869-4 : 2014 INSTRUMENT TRANSFORMERS - PART 4: ADDITIONAL REQUIREMENTS FOR COMBINED TRANSFORMERS
    I.S. EN 61000-4-25:2002 ELECTROMAGNETIC COMPATIBILITY (EMC) - TESTING AND MEASUREMENT TECHNIQUES - HEMP IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS (IEC 61000-4-25:2001 (EQV))
    CEI EN 61000-3-12 : 2012 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW-VOLTAGE SYSTEMS WITH INPUT CURRENT > 16 A AND <= 75 A PER PHASE
    CEI EN 61938 : 2014 MULTIMEDIA SYSTEMS - GUIDE TO THE RECOMMENDED CHARACTERISTICS OF ANALOGUE INTERFACES TO ACHIEVE INTEROPERABILITY
    PREN 50598-2 : DRAFT 2013 ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 2: ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS
    BS EN 61810-1:2015 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS
    EN 50588-1:2017 MEDIUM POWER TRANSFORMERS 50 HZ, WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 1: GENERAL REQUIREMENTS
    BS PD CLC/TR 50422 : 2013 GUIDE FOR THE APPLICATION OF THE EUROPEAN STANDARD EN 50160
    UNE-EN 61000-3-12:2012 Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and
    BS EN 60137 : 2017 INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V
    EN 61800-9-2 : 2017 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 9-2: ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS (IEC 61800-9-2:2017)
    EN 60601-1-11:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT (IEC 60601-1-11:2015)
    I.S. EN 62271-1:2017 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
    I.S. EN IEC 61938:2018 MULTIMEDIA SYSTEMS - GUIDE TO THE RECOMMENDED CHARACTERISTICS OF ANALOGUE INTERFACES TO ACHIEVE INTEROPERABILITY
    I.S. EN 61869-4:2014 INSTRUMENT TRANSFORMERS - PART 4: ADDITIONAL REQUIREMENTS FOR COMBINED TRANSFORMERS
    I.S. EN 60065:2014 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
    EN 61810-1:2015/AC:2018-04 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS (IEC 61810-1:2015/COR1:2018)
    EN 62488-2:2017 POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC (IEC 62488-2:2017)
    I.S. EN 15500-1:2017 ENERGY PERFORMANCE OF BUILDINGS - CONTROL FOR HEATING, VENTILATING AND AIR CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5
    BS EN 62271-1:2017 High-voltage switchgear and controlgear Common specifications for alternating current switchgear and controlgear
    I.S. EN 16479:2014 WATER QUALITY - PERFORMANCE REQUIREMENTS AND CONFORMITY TEST PROCEDURES FOR WATER MONITORING EQUIPMENT - AUTOMATED SAMPLING DEVICES (SAMPLERS) FOR WATER AND WASTE WATER
    EN 62271-1:2017 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR (IEC 62271-1:2017)
    I.S. EN IEC 63044-3:2018 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 3: ELECTRICAL SAFETY REQUIREMENTS
    I.S. EN 60137:2017 INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V
    BS EN 50341-1 : 2012 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
    I.S. EN IEC 62909-1:2018 BI-DIRECTIONAL GRID-CONNECTED POWER CONVERTERS - PART 1: GENERAL REQUIREMENTS
    UNI EN 12977-5 : 2012 THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT
    CEI EN 61800-9-2 : 1ED 2017 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 9-2: ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS
    PREN 50628 : DRAFT 2014 ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES
    EN 12098-1:2017 ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS - MODULES M3-5, 6, 7, 8
    I.S. EN 50341-1:2012 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
    17/30356400 DC : 0 BS EN 17116-4 - SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 4: WASHER-EXTRACTORS
    EN IEC 61938 : 2018 MULTIMEDIA SYSTEMS - GUIDE TO THE RECOMMENDED CHARACTERISTICS OF ANALOGUE INTERFACES TO ACHIEVE INTEROPERABILITY (IEC 61938:2018)
    I.S. EN 62488-2:2017 POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC
    BS EN 61400-2:2014 (published 2014-10) Wind turbines Small wind turbines
    BS EN 12977-5:2012 (published 2012-04) Thermal solar systems and components. Custom built systems Performance test methods for control equipment
    17/30367208 DC : 0 BS EN 17038-3 - PUMPS - ROTODYNAMIC PUMPS - ENERGY EFFICIENCY INDEX - METHODS OF QUALIFICATION AND VERIFICATION - PART 3: TESTING AND CALCULATION OF ENERGY EFFICIENCY INDEX (EEI) OF BOOSTER SETS
    17/30361327 DC : 0 BS EN 13487 - HEAT EXCHANGER - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS AND DRY COOLERS - SOUND MEASUREMENT
    CEI EN 50341-1 : 2013 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
    EN IEC 63044-3 : 2018 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 3: ELECTRICAL SAFETY REQUIREMENTS (IEC 63044-3:2017)
    UNE-EN 16479:2014 Water quality - Performance requirements and conformity test procedures for water monitoring equipment - Automated sampling devices (samplers) for water and waste water
    EN 60137:2017 INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V (IEC 60137:2017)
    I.S. EN 61400-2:2014 WIND TURBINES - PART 2: SMALL WIND TURBINES
    EN 50341-1:2012 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
    BS EN 61800-9-2:2017 (published 2017-12) Adjustable speed electrical power drive systems Ecodesign for power drive systems, motor starters, power electronics and their driven applications. Energy efficiency indicators for power drive systems and motor starters
    BS EN 62488-2:2017 POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC (IEC 62488-2:2017)
    I.S. EN 62689-1:2016 CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS
    I.S. EN 61851-21-1:2017 ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21-1: ELECTRIC VEHICLE ON-BOARD CHARGER EMC REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN AC/DC SUPPLY
    EN IEC 62909-1 : 2018 BI-DIRECTIONAL GRID-CONNECTED POWER CONVERTERS - PART 1: GENERAL REQUIREMENTS (IEC 62909-1:2017)
    CEI EN 62756-1 : 2016 DIGITAL LOAD SIDE TRANSMISSION LIGHTING CONTROL - PART 1: BASIC REQUIREMENTS
    UNE-EN 61869-5:2012 Instrument transformers - Part 5: Additional requirements for capacitor voltage transformers
    I.S. EN 12098-5:2017 ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 5: START-STOP SCHEDULERS FOR HEATING SYSTEMS - MODULES M3-5, 6, 7, 8
    EN 12977-5:2018 THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT
    EN 12098-5:2017 ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 5: START-STOP SCHEDULERS FOR HEATING SYSTEMS - MODULES M3-5, 6, 7, 8
    EN 15500-1 : 2017 ENERGY PERFORMANCE OF BUILDINGS - CONTROL FOR HEATING, VENTILATING AND AIR CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5
    I.S. EN 61800-2:2015 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 2: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED A.C. POWER DRIVE SYSTEMS
    I.S. EN 61938:2013 MULTIMEDIA SYSTEMS - GUIDE TO THE RECOMMENDED CHARACTERISTICS OF ANALOGUE INTERFACES TO ACHIEVE INTEROPERABILITY (IEC 61938:2013 (EQV))
    I.S. EN 60730-1:2016 AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS
    I.S. EN 60909-0:2016 SHORT-CIRCUIT CURRENTS IN THREE-PHASE A.C. SYSTEMS - PART 0: CALCULATION OF CURRENTS
    EN 60358-1 : 2012 COUPLING CAPACITORS AND CAPACITOR DIVIDERS - PART 1: GENERAL RULES (IEC 60358-1:2012)
    UNE-EN 61439-1:2012 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
    BS EN 50628 : 2016 ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES
    UNE-EN 61140:2017 Protection against electric shock - Common aspects for installation and equipment
    BS EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies General rules
    BS EN 60730-1:2011 Automatic electrical controls for household and similar use General requirements
    EN 60669-1:2018 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS (IEC 60669-1:2017, MODIFIED)
    DIN EN 12098-1:2013-10 ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS - MODULES M3-5, 6, 7, 8
    BS EN 61140 : 2002 PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT
    EN 61000-4-25 : 2002 AMD 1 2012 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-25: TESTING AND MEASUREMENT TECHNIQUES - HEMP IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS (IEC 61000-4-25:2001/A1:2012)
    UNE-EN 60730-1:2013 Automatic electrical controls for household and similar use - Part 1: General requirements
    EN 60601-1-12:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-12: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS INTENDED FOR USE IN THE EMERGENCY MEDICAL SERVICES ENVIRONMENT (IEC 60601-1-12:2014)
    EN 60065:2014/AC:2017-01 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016)
    EN 302 099 : 2.1.1 ENVIRONMENTAL ENGINEERING (EE); POWERING OF EQUIPMENT IN ACCESS NETWORK
    EN 61400-2:2014 WIND TURBINES - PART 2: SMALL WIND TURBINES (IEC 61400-2:2013)
    EN 61869-4:2014/AC:2014 INSTRUMENT TRANSFORMERS - PART 4: ADDITIONAL REQUIREMENTS FOR COMBINED TRANSFORMERS (IEC 61869-4:2013)
    EN 60909-0:2016 SHORT-CIRCUIT CURRENTS IN THREE-PHASE A.C. SYSTEMS - PART 0: CALCULATION OF CURRENTS (IEC 60909-0:2016)
    EN 60730-1:2016 AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS (IEC 60730-1:2013, MODIFIED + COR1:2014)
    EN 61000-3-12:2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW-VOLTAGE SYSTEMS WITH INPUT CURRENT > 16 A AND <= 75 A PER PHASE (IEC 61000-3-12:2011)
    EN 60034-30-1 : 2014 ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE) (IEC 60034-30-1:2014)
    HD 60364-5-534:2016 (edition 2) Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control - Clause 534: Devices for protection against transient overvoltages
    EN 61869-3 : 2011 INSTRUMENT TRANSFORMERS - PART 3: ADDITIONAL REQUIREMENTS FOR INDUCTIVE VOLTAGE TRANSFORMERS (IEC 61869-3:2011)
    HD 60364-5-557:2013/A11:2016 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-557: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - AUXILIARY CIRCUITS
    EN 61140:2016 PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT (IEC 61140:2016)
    EN 61481-2 : 2014 LIVE WORKING - PHASE COMPARATORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES FROM 1 KV TO 36 KV A.C. (IEC 61481-2:2014)
    DIN EN 12977-5:2012-06 THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT
    EN 61869-5 : 2011 INSTRUMENT TRANSFORMERS - PART 5: ADDITIONAL REQUIREMENTS FOR CAPACITOR VOLTAGE TRANSFORMERS (IEC 61869-5:2011)
    EN 60398:2015 INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - GENERAL PERFORMANCE TEST METHODS (IEC 60398:2015)
    EN 50628:2016 ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES
    EN 62756-1 : 2015 DIGITAL LOAD SIDE TRANSMISSION LIGHTING CONTROL - PART 1: BASIC REQUIREMENTS (IEC 62756-1:2015)
    EN 16479 : 2014 WATER QUALITY - PERFORMANCE REQUIREMENTS AND CONFORMITY TEST PROCEDURES FOR WATER MONITORING EQUIPMENT - AUTOMATED SAMPLING DEVICES (SAMPLERS) FOR WATER AND WASTE WATER
    UNI EN 12098-1 : 2013 CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS
    UNI EN 12098-3 : 2013 CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 62271-1:2017 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR (IEC 62271-1:2017)
    IEC 60050-601:1985 International Electrotechnical Vocabulary (IEV) - Part 601: Generation, transmission and distribution of electricity - General
    IEC 62271-1:2017 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
    EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
    IEC 60364-5-52:2009 Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective