• IEC 60079-15:2010

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    Explosive atmospheres - Part 15: Equipment protection by type of protection "n"

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Superseded date:  31-12-2021

    Language(s):  English - French, Spanish, Castilian

    Published date:  28-01-2010

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Abstract - (Show below) - (Hide below)

    IEC 60079-15:2010 specifies requirements for the construction, testing and marking for Group II electrical equipment with type of protection, "n" intended for use in explosive gas atmospheres. This standard applies to electrical equipment where the rated voltage does not exceed 15 kV r.m.s. a.c. or d.c. This standard supplements and modifies the general requirements of IEC 60079-0, except as indicated in Table 1. Where a requirement of this standard conflicts with a requirement of IEC 60079-0, the requirement of this standard takes precedence. The significant technical changes with respect to the previous edition are as follows:
    - addition of equipment protection levels;
    - removal of the requirements for energy-limited "nL" and associated energy limited apparatus "[nL]";
    - removal of the requirements for encapsulated Devices "nC";
    - requirements for electrical connections expanded and clarified;
    - requirements for electrical connections expanded and clarified;
    - requirements for luminaire ballasts expanded and clarified;
    - requirements for evaluation and testing of motor rotors clarified;
    - 15 kV limit for equipment protection by type of protection "n" added;
    - spacing requirement for voltages above 10 kV modified;
    - requirements for restricted breathing enclosures modified;
    - modification to requirements for motor rotors and stators;
    - addition of Annex A (informative);
    - and undated references to IEC 60079-0 included.

    This publication is to be read in conjunction with IEC 60079-0:2007.The contents of the Interpretation sheet 1 of September 2016 have been included in this copy.

    General Product Information - (Show below) - (Hide below)

    Committee TC 31
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    GOST R 52350.27 : 2005 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO) AND FIELDBUS NON-INCENDIVE CONCEPT (FNICO)
    BS EN ISO 15970 : 2014 NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR
    UNE-EN 60079-17:2014 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
    05/30106456 DC : DRAFT AUG 2005 IEC 62282-6 - FUEL CELL TECHNOLOGIES - PART 6-1: MICRO FUEL CELL POWER SYSTEMS - SAFETY
    04/30113665 DC : DRAFT MAY 2004 IEC 60079-19 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 19: REPAIR AND OVERHAUL FOR APPARATUS USED IN EXPLOSIVE ATMOSPHERES (OTHER THAN EXPLOSIVES)
    04/30105027 DC : DRAFT JUNE 2004 ISO 21789 - GAS TURBINES - SAFETY
    BS IEC 60079-19 : 1993 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - REPAIR AND OVERHAUL FOR APPARATUS USED IN EXPLOSIVE ATMOSPHERES (OTHER THAN MINES OR EXPLOSIVES)
    09/30182356 DC : 0 BS EN 12581:2005/A1 - COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
    UNE-EN 60079-30-2:2017 Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance
    I.S. EN 60079-0:2012 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD))
    CSA C22.4 PACKAGE : 2009 CONSISTS OF C22.4 NO. 1-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE AND C22.4 NO. 2-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE - SAFETY MANAGEMENT SYSTEM REQUIREMENTS
    BS PD CEN/TR 16787 : 2014 INDUSTRIAL GAS INSTALLATION - GUIDELINE
    06/30149421 DC : DRAFT APR 2006
    13/30257895 DC : 0 BS EN 1755 - SAFETY OF INDUSTRIAL TRUCKS - OPERATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES - USE IN FLAMMABLE GAS, VAPOUR, MIST AND DUST
    BS EN 16299 : 2013 CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS
    BS EN 62282-5-1:2012 (published 2013-01) Fuel cell technologies Portable fuel cell power systems. Safety
    I.S. EN 13616-2:2016 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - PART 2: OVERFILL PREVENTION DEVICES WITHOUT A CLOSURE DEVICE
    I.S. EN 60079-25:2010 EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS (IEC 60079-25:2010 (EQV))
    IEC 60335-2-108:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-108: PARTICULAR REQUIREMENTS FOR ELECTROLYSERS
    PREN 14236 : DRAFT 2017 ULTRASONIC DOMESTIC GAS METERS
    10/30214970 DC : 0 BS EN 13616 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
    PREN 14678-1 : DRAFT 2010 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
    BS EN 62282-6-100 : 2010 FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY
    PREN 1473 : DRAFT 2018 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
    PREN 13617-1 : DRAFT 2010 PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
    13/30277660 DC : 0 BS EN 60335-2-89:2010/AA - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR COMMERCIAL REFRIGERATING APPLIANCES WITH AN INCORPORATED OR REMOTE REFRIGERANT CONDENSING UNIT OR COMPRESSOR
    03/300201 DC : DRAFT FEB 2003 IEC 60079-0 ED.4.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
    NF EN 60079-19 : 2011 AMD 1 2015 EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION
    UNE-EN 60079-28:2016 Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation
    BS EN 60079-25:2010 Explosive atmospheres Intrinsically safe electrical systems
    DD IEC PAS 62282-6-150 : 2011 FUEL CELL TECHNOLOGIES - PART 6-150: MICRO FUEL CELL POWER SYSTEMS - SAFETY - WATER REACTIVE (UN DIVISION 4.3) COMPOUNDS IN INDIRECT PEM FUEL CELLS
    13/30279151 DC : 0 BS EN 6101-2-011 ED.1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-011: PARTICULAR REQUIREMENTS FOR REFRIGERATED EQUIPMENT
    I.S. EN 60079-2:2014 EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P'
    EN 60079-29-1:2016 EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES
    CEN/TR 16787 : 2014 INDUSTRIAL GAS INSTALLATION - GUIDELINE
    I.S. EN 16299:2013 CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS
    BS EN 60335-2-108 : 2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-108: PARTICULAR REQUIREMENTS FOR ELECTROLYSERS
    00/241099 DC : DRAFT MAR 2000 IEC 60079-17 EDITION 3 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 17: INSPECTION AND MAINTENANCE OF ELECTRICAL INSTALLATIONS IN HAZARDOUS AREAS (OTHER THAN MINES)
    BS EN 60079-17:2014 EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE
    I.S. EN 61810-1:2015 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS
    CSA C22.4 No. 1 : 2009(R2018) OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE
    12/30268608 DC : 0 BS EN 60079-17/ED 5 - EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE
    10/30219405 DC : 0 BS EN 13617-1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
    13/30286135 DC : 0 BS EN 13616-1 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - REQUIREMENTS AND TEST/ASSESSMENT METHODS - PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE
    08/30180312 DC : DRAFT MAR 2008 BS EN 50223 - STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS
    CEI EN 60335-2-24 : 2011 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-24: PARTICULAR REQUIREMENTS FOR REFRIGERATING APPLIANCES, ICE-CREAM APPLIANCES AND ICE MAKERS
    I.S. EN 60079-27:2008 EXPLOSIVE ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO)
    BS EN 60079-27:2008 EXPLOSIVE ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO)
    09/30198043 DC : 0 BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
    13/30267536 DC : 0 BS EN 60079-29-1 ED 2.0 - EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES
    PREN 1755 : DRAFT 2013 SAFETY OF INDUSTRIAL TRUCKS - OPERATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES - USE IN FLAMMABLE GAS, VAPOUR, MIST AND DUST
    EN 1473:2016 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
    NF EN 60335-2-108 : 2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-108: PARTICULAR REQUIREMENTS FOR ELECTROLYSERS
    CEI EN 60079-27 : 2010 EXPLOSIVE ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO)
    BS 5000-16(1997) : 1997 ROTATING ELECTRICAL MACHINES OF PARTICULAR TYPES OR FOR PARTICULAR APPLICATIONS - ROTATING ELECTRICAL MACHINES WITH TYPE OF PROTECTION 'N'
    CEI EN 60079-17 : 2015 EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE
    13/30291774 DC : 0 BS EN 378-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
    09/30209043 DC : 0 BS EN 13922 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - OVERFILL PREVENTION SYSTEMS FOR LIQUID FUELS
    09/30182350 DC : 0 BS EN 12757-1:2005/A1 - MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
    DIN EN 15268 E : 2008 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES
    05/30128234 DC : DRAFT FEB 2005 EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
    13/30248785 DC : 0 BS EN 61800-2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 2: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE FREQUENCY A.C. POWER DRIVE SYSTEMS
    UNI CEI EN 45510-2-5 : 2011 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS
    05/30128501 DC : DRAFT JAN 2005 IEC 60079-6 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 6: OIL-IMMERSION 'O'
    CSA E60079.6 : 2002 : R2011 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 6: OIL-IMMERSION "O"
    UNE-EN 13616-2:2016 Overfill prevention devices for static tanks for liquid fuels - Part 2: Overfill prevention devices without a closure device
    CEI UNI EN 45510-2-5 : 2006 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS
    IEC 60335-2-40:2018 Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
    DIN EN 15268:2008-11 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP
    04/30112677 DC : 0 IEC 61779-1 ED.2 - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
    06/30160085 DC : 0 BS ISO 15970 - NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR
    BS IEC 60092-502 : 1999 ELECTRICAL INSTALLATIONS IN SHIPS - PART 502: TANKERS - SPECIAL FEATURES
    BS EN 15268 : 2008 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES
    12/30270980 DC : 0 BS EN 1127-2 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
    12/30260078 DC : 0 BS EN 60092-502 IEC 60092-502 - ELECTRICAL INSTALLATIONS IN SHIPS - PART 502: TANKERS - SPECIAL FEATURES
    10/30227671 DC : 0 BS EN 14678-1 - LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
    08/30186475 DC : 0 BS EN 13617-1 AMD1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
    11/30247086 DC : 0 BS EN 60079-1 ED. 7.0 - EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES "D"
    14/30297213 DC : 0 BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
    BS EN 60079-28:2015 (published 2015-10) Explosive atmospheres Protection of equipment and transmission systems using optical radiation
    BS EN 13616-1 : 2016 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE
    09/30182347 DC : 0 BS EN 12621:2006/A1 - MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
    12/30258783 DC : 0 BS EN 60335-2-11 A1 ED 7.0 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-11: PARTICULAR REQUIREMENTS FOR TUMBLE DRYERS
    BS 7535(1992) : 1992 GUIDE TO THE USE OF ELECTRICAL APPARATUS COMPLYING WITH BS 5501 OR BS 6941 IN THE PRESENCE OF COMBUSTIBLE DUSTS
    BS EN 60335-2-89 : 2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR COMMERCIAL REFRIGERATING APPLIANCES WITH AN INCORPORATED OR REMOTE REFRIGERANT CONDENSING UNIT OR COMPRESSOR
    BS EN 50015 : 1998 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - OIL IMMERSION 'O'
    EN 60079-30-2:2017 EXPLOSIVE ATMOSPHERES - PART 30-2: ELECTRICAL RESISTANCE TRACE HEATING - APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE (IEC/IEEE 60079-30-2:2015, MODIFIED)
    CEI EN 60079-18 : 2016 EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
    CSA PLUS 2203 : 2001 HAZARDOUS LOCATIONS - GUIDE FOR THE DESIGN, TESTING, CONSTRUCTION, AND INSTALLATION OF EQUIPMENT IN EXPLOSIVE ATMOSPHERES
    05/30127970 DC : DRAFT JAN 2005 EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
    03/313403 DC : DRAFT SEP 2003 IEC 60079-27 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO) AND FIELDBUS NON-INCENDIVE CONCEPT (FNICO)
    BIS IS/IEC 60079-25 : 2010 EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS
    I.S. EN 60079-14:2014 EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION
    BIS IS/IEC 60079-1 : 2007 EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
    NF EN 50015 : 1999 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - OIL IMMERSION 'O'
    BS EN 60079-2:2014 (published 2018-04) Explosive atmospheres Equipment protection by pressurized enclosure \'p\'
    CSA E60079.6 : 2002 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 6: OIL-IMMERSION "O"
    I.S. EN 60079-28:2015 EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION
    BS EN 45510-2-5 : 2002 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS
    CEI EN 60335-2-108 : 2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-108: PARTICULAR REQUIREMENTS FOR ELECTROLYSERS
    CSA C22.2 No. 60079.0 : 2015 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
    NF EN 15268 : 2008 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION AND SUBMERSIBLE PUMP ASSEMBLIES
    NF EN 61010-2-012 : 2016 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
    BS EN 61779-1 : 2000 ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
    CSA C22.2 NO. 60079-29-1:17 EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES
    BS EN 61010-2-012:2016 (published 2016-12) Safety requirements for electrical equipment for measurement, control and laboratory use Particular requirements for climatic and environmental testing and other temperature conditioning equipment
    06/30149534 DC : DRAFT APR 2006 IEC 60079-27 - EXPLOSIVE ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO)
    IEC 60079-1 REDLINE : 7ED 2014 EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
    UNE-EN 60079-25:2017 Explosive atmospheres -- Part 25: Intrinsically safe electrical systems
    PREN 378-2 : DRAFT 2013 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
    BS ISO 15970 : 2008 NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR
    SAE J 2578 : 2014 RECOMMENDED PRACTICE FOR GENERAL FUEL CELL VEHICLE SAFETY
    UNI EN 1127-1 : 2011 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
    UNE-EN 16299:2013 Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations
    IEC 61779-6:1999 Electrical apparatus for the detection and measurement of flammable gases - Part 6: Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
    BS EN 60335-2-24:2010+A2:2019 (published 2019-03) Household and similar electrical appliances. Safety Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
    I.S. EN 60079-1:2014 EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
    BS EN 60335-2-11:2010+A2:2018 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-11: PARTICULAR REQUIREMENTS FOR TUMBLE DRYERS
    NF EN 50381 : 2004 TRANSPORTABLE VENTILATED ROOMS WITH OR WITHOUT AN INTERNAL SOURCE OF RELEASE
    BS EN 61810-1:2015 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS
    CEI EN 61810-1 : 2016 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS
    IEC PAS 62282-6-1:2006 Fuel cell technologies - Part 6-1: Micro fuel cell power systems - Safety
    BS EN 50570 : 2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
    UNI EN ISO 15970 : 2014 NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR
    CSA C22.2 No. 60335-2-89 : 2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR COMMERCIAL REFRIGERATING APPLIANCES WITH AN INCORPORATED OR REMOTE REFRIGERANT UNIT OR COMPRESSOR
    IEC 60079-33:2012 Explosive atmospheres - Part 33: Equipment protection by special protection 's'
    18/30369304 DC : DRAFT APR 2018 BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
    I.S. EN 60079-30-2:2017 EXPLOSIVE ATMOSPHERES - PART 30-2: ELECTRICAL RESISTANCE TRACE HEATING - APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE
    EN 60335-2-89:2010/A2:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR COMMERCIAL REFRIGERATING APPLIANCES WITH AN INCORPORATED OR REMOTE REFRIGERANT CONDENSING UNIT OR COMPRESSOR (IEC 60335-2-89:2010/A2:2015, MODIFIED)
    UNE-EN 60079-29-1:2017 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases
    I.S. EN 1127-1:2011 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
    I.S. EN 378-2:2016 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
    I.S. EN 62282-5-1:2012 FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012 (EQV))
    CAN/CSA-C22.2 NO. 60335-2-34:17 Household and similar electrical appliances Safety Part 2-34: Particular requirements for motor-compressors (Binational standard with UL 60335-2-34)
    I.S. EN 60079-29-1:2016 EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES
    CSA E60335.2.7 : 2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-7: PARTICULAR REQUIREMENTS FOR WASHING MACHINES
    IEEE 1349 : 2011 GUIDE FOR THE APPLICATION OF ELECTRIC MOTORS IN CLASS 1, DIVISION 2 AND CLASS 1, ZONE 2 HAZARDOUS (CLASSIFIED) LOCATIONS
    I.S. EN 61010-2-012:2016 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
    EN 61810-1:2015/AC:2018-04 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS (IEC 61810-1:2015/COR1:2018)
    CSA E60079.0 : 2002 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - GENERAL REQUIREMENTS
    I.S. EN 60079-17:2014 EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE
    NF EN 60079-25 : 2011 EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS
    BS EN 60079-29-1:2007 EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES
    UNI EN 15268 : 2009 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES
    I.S. EN 60335-2-108:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-108: PARTICULAR REQUIREMENTS FOR ELECTROLYSERS
    BS EN 60079-19 : 2011 EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION
    I.S. EN 50570:2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
    I.S. EN 60335-2-89:2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR COMMERCIAL REFRIGERATING APPLIANCES WITH AN INCORPORATED OR REMOTE REFRIGERANT CONDENSING UNIT OR COMPRESSOR
    I.S. EN 60335-2-24:2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-24: PARTICULAR REQUIREMENTS FOR REFRIGERATING APPLIANCES, ICE-CREAM APPLIANCES AND ICE MAKERS
    S.R. CEN/TR 16787:2014 INDUSTRIAL GAS INSTALLATION - GUIDELINE
    I.S. EN 62282-6-100:2010 FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-6-100:2010 (EQV))
    PREN 1127-2 : DRAFT 2012 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
    EN 60079-18:2015/A1:2017 EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M' (IEC 60079-18:2014/A1:2017)
    I.S. EN 14236:2007 ULTRASONIC DOMESTIC GAS METERS
    CEI EN 60079-25 : 2012 EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS
    BS EN 60335-2-24:2010+A2:2019 (published 2019-06) Household and similar electrical appliances. Safety Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
    CSA E60335-2-11:13 (R2019) Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers (Adopted IEC 60335-2-11:2008 + A1:2012, edition 7:2008 consolidated with amendment 1:2012, with Canadian deviations) | Appareils lectrodomestiques et analogues - Scurit - Partie 2-11: Rgles particulires pour les sche-linge tambour. (norme CEI 60335- 2-11:2008 + A1:2012 adopte, dition 7:2008 consolide par l\'amendement 1:2012, avec exigences propres au Canada)
    NBR 5418 : 1995 INSTALACOES ELETRICAS EM ATMOSFERAS EXPLOSIVAS
    BS EN 60079-0 : 2012 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
    UNE-EN 60079-19:2011 Explosive atmospheres -- Part 19: Equipment repair, overhaul and reclamation
    I.S. EN 60079-18:2015 EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
    NF EN 61010-2-011 : 2017 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-011: PARTICULAR REQUIREMENTS FOR REFRIGERATED EQUIPMENT
    CEI EN 61010-2-012 : 1ED 2017 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
    IEC 60079-0:2017 Explosive atmospheres - Part 0: Equipment - General requirements
    EN 378-2:2016 (edition 2) Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
    CEI EN 60079-30-2 : 2008 EXPLOSIVE ATMOSPHERES - PART 30-2: ELECTRICAL RESISTANCE TRACE HEATING - APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE
    CEI EN 50381 : 2006 TRANSPORTABLE VENTILATED ROOMS WITH OR WITHOUT AN INTERNAL SOURCE OF RELEASE
    I.S. EN 60335-2- 11:2010&A11:2012&A1:2015&A2:2018 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-11: PARTICULAR REQUIREMENTS FOR TUMBLE DRYERS
    I.S. EN 13616-1:2016 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS -PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE
    CSA C22.2 No. 60079-25 : 2014 EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS
    17/30356734 DC : 0 BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS
    I.S. EN 61779-1:2003 ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
    DIN EN 14236 E : 2008 ULTRASONIC DOMESTIC GAS METERS
    CEI EN 60079-28 : 2016 EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION
    BS EN 1127-1:2019 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
    BS EN 1127-1:2011 Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology
    UNI EN 16299 : 2013 CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS
    EN 60079-19:2011/A1:2015 EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION (IEC 60079-19:2010)
    DIN EN 12753:2011-02 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements (includes Amendment A1:2010)
    BS EN 13616-2 : 2016 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - OVERFILL PREVENTION DEVICES WITHOUT A CLOSURE DEVICE
    I.S. EN 45510-2-5:2002 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS
    S.R. CLC/TR 60079-33:2015 EXPLOSIVE ATMOSPHERES - PART 33: EQUIPMENT PROTECTION BY SPECIAL PROTECTION 'S'
    NFC 01 426 : 2008 AMD 1 2015 ELECTROTECHNICAL VOCABULARY - PART 426: EQUIPMENT FOR EXPLOSIVE ATMOSPHERES
    IEC 60335-2-40 REDLINE : 6.0 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS
    UNE-EN 13616-1:2016 Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device
    I.S. EN 60335-2-7:2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-7: PARTICULAR REQUIREMENTS FOR WASHING MACHINES
    UNE-EN 60079-1:2015 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
    IEC 60079-11:2011 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
    DIN EN 12757-1:2011-02 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010)
    EN 14236 : 2007 ULTRASONIC DOMESTIC GAS METERS
    EN 13617-1:2012 PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
    IEC 60079-18 : 2014 REDLINE EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
    ISO 5149-2:2014 Refrigerating systems and heat pumps Safety and environmental requirements Part 2: Design, construction, testing, marking and documentation
    IEC 60079-0 REDLINE : 7.0 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
    IEC 60050-426:2008 International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres
    IEC 61892-7:2014 Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas
    IEC 60092-502:1999 Electrical installations in ships - Part 502: Tankers - Special features
    IEC 60079-18:2014 RLV Explosive atmospheres - Part 18: Equipment protection by encapsulation m
    IEC PAS 62282-6-150:2011 Fuel cell technologies - Part 6-150: Micro fuel cell power systems - Safety - Water reactive (UN Devision 4.3) compounds in indirect PEM fuel cells
    IEC 60079-1:2014 RLV Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
    I.S. EN 15268:2008 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES
    BS PD 60079-14 : 2000 GUIDE TO APPLICATION OF BS EN 60079-14
    CSA C22.2 No. 60079-11 : 2014 EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY 'I'
    EN 62282-6-100:2010/A1:2012 FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-6-100:2010/A1:2012)
    EN 13922:2011 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - OVERFILL PREVENTION SYSTEMS FOR LIQUID FUELS
    NF EN 61810-1 : 2015 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS
    EEMUA 186 : 2016 A PRACTITIONER'S HANDBOOK FOR POTENTIALLY EXPLOSIVE ATMOSPHERES
    DIN EN 12312-5 E : 2009 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT
    DIN EN 12215:2010-06 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
    CSA C22.2 No. 60335.2.24 : 2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-24: PARTICULAR REQUIREMENTS FOR REFRIGERATING APPLIANCES, ICE-CREAM APPLIANCES AND ICE-MAKERS
    DIN EN 12621:2011-07 Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010)
    DIN EN 12581:2011-02 Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements (includes Amendment A1:2010)
    DIN EN 13617-1:2012-08 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
    NF EN 60335-2-89 : 2010 AMD 1 2016 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR COMMERCIAL REFRIGERATING APPLIANCES WITH AN INCORPORATED OR REMOTE REFRIGERANT CONDENSING UNIT OR COMPRESSOR
    DIN EN 13355:2010-06 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
    DIN EN 1473:2016-10 Installation and equipment for liquefied natural gas - Design of onshore installations
    DIN EN 14678-1:2013-06 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
    DIN EN 12921-3:2010-02 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids (includes Amendment A1:2008)
    DIN EN 13852-1:2014-01 Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
    IEC 60079-11:2011 RLV Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
    DIN EN 14236:2008-06 ULTRASONIC DOMESTIC GAS METERS
    UNE-EN 378-2:2017 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
    BS EN 1755:2015 Industrial Trucks. Safety requirements and verification. Supplementary requirements for operation in potentially explosive atmospheres
    UNE-EN 1127-1:2012 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
    BS ISO 26142 : 2010 HYDROGEN DETECTION APPARATUS - STATIONARY APPLICATIONS
    BS ISO 5149-2:2014 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
    BS EN 13852-2 : 2004 CRANES - OFFSHORE CRANES - PART 2: FLOATING CRANES
    IEC 60079-17:2013 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
    12/30269297 DC : 0 BS EN 60079-14/ED 5 - EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION
    BS EN 12581 : 2005 COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
    13/30286778 DC : 0 BS EN 60079-1 - EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
    BS EN 14678-1 : 2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
    UNE-EN 12621:2006 Machinery for the supply and circulation of coating materials under pressure - Safety requirements
    BS EN 60079-11:2012 EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY 'I'
    UNE-EN 60079-14:2016 Explosive atmospheres - Part 14: Electrical installations design, selection and erection
    UNE-EN 1755:2016 Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres
    IEC 60335-2-89:2010+AMD1:2012+AMD2:2015 CSV Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor
    08/30190078 DC : DRAFT SEP 2008 BS ISO 26142 - HYDROGEN DETECTOR
    BS EN 1473:2016 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
    BS EN 12921-3 : 2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS
    BS EN 12312-5 : 2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT
    IEC 60079-11 REDLINE : 6.0 EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY 'I'
    BS EN 12215 : 2004 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
    BS EN 13355 : 2004 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
    09/30206527 DC : 0 BS EN 60079-0 ED 6.0 - EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
    BS EN 12757-1 : 2005 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
    IEC 61779-1:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 1: General requirements and test methods
    BS EN 61010-2-011:2017 (published 2017-09) Safety requirements for electrical equipment for measurement, control, and laboratory use Particular requirements for refrigerating equipment
    BS EN 60079-18 : 2015 EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
    16/30354067 DC : 0 BS EN 62282-5-100 - FUEL CELL TECHNOLOGIES - PART 5-100: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY
    BS IEC 61892-7:2014 MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 7: HAZARDOUS AREAS
    BS EN 13852-1 : 2013 CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES
    IEC 60079-0:2017 RLV Explosive atmospheres - Part 0: Equipment - General requirements
    IEC 61010-2-011:2016 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment
    IEC 60079-27:2008 EXPLOSIVE ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO)
    ISO 26142:2010 Hydrogen detection apparatus Stationary applications
    IEC 60079-25:2010 Explosive atmospheres - Part 25: Intrinsically safe electrical systems
    BS EN 60335-2-40 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS
    BS EN 14236:2007 ULTRASONIC DOMESTIC GAS METERS
    BS EN 13617-1:2012 PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
    05/30138005 DC : DRAFT AUG 2005 IEC 60079-14 ED 4 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS IN HAZARDOUS AREAS (OTHER THAN MINES)
    BS EN 12621 : 2006 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
    UNE-EN 60079-0:2013 Explosive atmospheres - Part 0: Equipment - General requirements
    12/30276304 DC : 0 BS EN 61892-7 ED 3.0 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 7: HAZARDOUS AREAS
    08/30175787 DC : DRAFT JAN 2008 BS EN 60079-11 - EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY "I"
    IEC 62282-6-100:2010+AMD1:2012 CSV Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety
    UNE-EN 62282-5-1:2013 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
    IEC 60335-2-34:2012+AMD1:2015+AMD2:2016 CSV Household and similar electrical appliances - Safety - Part 2-34:Particular requirements for motor-compressors
    UNE-EN 13617-1:2012 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
    05/30134569 DC : DRAFT JUN 2005 IEC 60079-0. ED. 5.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
    10/30173705 DC : DRAFT SEP 2010 BS EN 62282-5-1 - FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY
    BS EN 378-2:2016 Refrigerating systems and heat pumps. Safety and environmental requirements Design, construction, testing, marking and documentation
    04/30089617 DC : DRAFT MARCH 2004
    BS PD CLC/TR 60079-33 : 2015 EXPLOSIVE ATMOSPHERES - PART 33: EQUIPMENT PROTECTION BY SPECIAL PROTECTION 'S'
    BS IEC 60079-33 : 2012 EXPLOSIVE ATMOSPHERES - PART 33: EQUIPMENT PROTECTION BY SPECIAL PROTECTION 'S'
    12/30218781 DC : DRAFT JAN 2012 BS EN 60335-2-40 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS
    IEC 60079-19:2010+AMD1:2015 CSV Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation
    13/30271432 DC : 0 BS EN 60079-18 ED 4.0 - EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
    BS EN 13922:2011 (published 2011-09) Tanks for transport of dangerous goods. Service equipment for tanks. Overfill prevention systems for liquid fuels
    UNE-EN 50570:2014 Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers
    UNE-EN 60079-2:2015 Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"
    UNE-EN 13922:2012 Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels
    UNE-EN 13852-1:2014 Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
    ISO 15970:2008 Natural gas Measurement of properties Volumetric properties: density, pressure, temperature and compression factor
    IEC 60335-2-11:2008+AMD1:2012+AMD2:2015 CSV Household and similar electrical appliances - Safety - Part 2-11:Particular requirements for tumble dryers
    UNE-EN 14678-1:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
    UNE-EN 61010-2-011:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment
    I.S. EN 13922:2011 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - OVERFILL PREVENTION SYSTEMS FOR LIQUID FUELS
    BS EN 12753 : 2005 THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
    BS EN 60079-14:2014 (published 2016-04) Explosive atmospheres Electrical installations design, selection and erection
    UNE-EN 60079-11:2013 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
    IEC 61810-1:2015 Electromechanical elementary relays - Part 1: General and safety requirements
    IEC 62282-5-1:2012 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
    UL 60335-2-89 : 1 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR COMMERCIAL REFRIGERATING APPLIANCES WITH AN INCORPORATED OR REMOTE REFRIGERANT UNIT OR COMPRESSOR
    CSA C22.2 No. 60335-2-40 : 2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS
    UL 60335-2-40 : 2 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS
    EEMUA 181 : 1995 GUIDE TO RISK BASED ASSESSMENTS OF IN-SITU LARGE EX 'E' AND EX 'N' MACHINES
    EN 60335-2-24:2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-24: PARTICULAR REQUIREMENTS FOR REFRIGERATING APPLIANCES, ICE-CREAM APPLIANCES AND ICE MAKERS
    BIS IS/IEC 60079-0 : 2011 EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
    I.S. EN 14678-1:2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
    DIN EN 1755:2016-02 Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres
    DIN EN 1473:1997-11 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
    I.S. EN 12757-1:2005 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
    I.S. EN 12215:2004 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
    I.S. EN 60079-11:2012 EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY 'I'
    DIN EN 1127-1:2011-10 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
    I.S. EN 13852-1:2013 CRANES - OFFSHORE CRANES - PART 1: GENERAL - PURPOSE OFFSHORE CRANES
    I.S. EN 12921-3:2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS
    I.S. EN 12621:2006 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
    DIN EN 13852-2:2005-03 Cranes - Offshore cranes - Part 2: Floating cranes
    I.S. EN 13355:2005 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
    I.S. EN 1755:2015 INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - SUPPLEMENTARY REQUIREMENTS FOR OPERATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES
    I.S. EN 12312-5:2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT
    I.S. EN 13617-1:2012 PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
    I.S. EN 1473:2016 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
    EN 12312-5:2005+A1:2009 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT
    EN 60079-14:2014/AC:2016 EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016)
    I.S. EN 12753:2005 THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
    I.S. EN 12581:2006 COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
    EN 12753:2005+A1:2010 THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
    IEC 60335-2-40:2018 RLV Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
    EN 60079-25:2010/AC:2013 EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS (IEC 60079-25:2010)
    CLC/TR 60079-33 : 2015 EXPLOSIVE ATMOSPHERES - PART 33: EQUIPMENT PROTECTION BY SPECIAL PROTECTION 'S' (IEC 60079-33:2012)
    DIN EN 13922:2011-11 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - OVERFILL PREVENTION SYSTEMS FOR LIQUID FUELS
    EN 61010-2-012 : 2016 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT (IEC 61010-2-012:2016)
    DIN EN 12312-5:2009-08 Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment (includes Amendment A1:2009)
    NF EN 60335-2-24 : 2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-24: PARTICULAR REQUIREMENTS FOR REFRIGERATING APPLIANCES, ICE-CREAM APPLIANCES AND ICE MAKERS
    EN 12621:2006+A1:2010 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
    EN 60079-28:2015 EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION (IEC 60079-28:2015)
    EN 60335-2-108 : 2008 Household and similar electrical appliances - Safety - Part 2-108: Particular requirements for electrolysers
    EN 12215:2004+A1:2009 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
    EN 12757-1:2005+A1:2010 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
    EN 13355:2004+A1:2009 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
    EN 60079-27:2008 EXPLOSIVE ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO)
    EN 60079-2:2014/AC:2015 EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014)
    I.S. EN 61010-2-011:2017 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-011: PARTICULAR REQUIREMENTS FOR REFRIGERATING EQUIPMENT
    EN 60079-0:2012/A11:2013 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
    EN 50570:2013/A1:2018 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
    EN 12921-3:2005+A1:2008 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS
    EN 62282-5-1:2012 FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012)
    EN 60079-17:2014 EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE (IEC 60079-17:2013)
    EN 60335-2-7:2010/A11:2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-7: PARTICULAR REQUIREMENTS FOR WASHING MACHINES
    EN 61779-1 : 2000 AMD 11 2004 ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
    EN 1127-1:2011 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
    EN 60079-1:2014 EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' (IEC 60079-1:2014)
    EN 60079-11:2012 EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY "I" (IEC 60079-11:2011)
    EN 61010-2-011 : 2017 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-011: PARTICULAR REQUIREMENTS FOR REFRIGERATING EQUIPMENT (IEC 61010-2-011:2016)
    DIN EN 16299:2013-06 CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS
    EN 50015:1998 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - OIL IMMERSION "O"
    EN 60335-2-7:2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-7: PARTICULAR REQUIREMENTS FOR WASHING MACHINES
    EN 60335-2-40:2003/A13:2012/AC:2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS
    EI Model code of safe practice Part 15:2015 MODEL CODE OF SAFE PRACTICE - PART 15: AREA CLASSIFICATION FOR INSTALLATIONS HANDLING FLAMMABLE FLUIDS
    EN 1755:2015 INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - SUPPLEMENTARY REQUIREMENTS FOR OPERATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES
    EN 15268 : 2008 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES
    EN 12581:2005+A1:2010 COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
    EN 13616-1 : 2016-06 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE
    EN 45510-2-5 : 2002 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS
    EN 13852-1:2013 CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES
    EN 13852-2 : 2004 CRANES - OFFSHORE CRANES - PART 2: FLOATING CRANES
    UNI EN 13617-1 : 2012 PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
    EN 14678-1:2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
    EN 16299 : 2013 CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective