Skip to content
Please enter a keyword to search

  • IEC 60512-1-1:2002

    Current The latest, up-to-date edition.

    Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English - French, Spanish, Castilian

    Published date:  21-02-2002

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope and object
    2 General
    3 Features to be examined
    4 Method of visual examination
    5 Details to be specified

    Abstract - (Show below) - (Hide below)

    Defines a standard test method for the visual examination of electromechanical components (essentially connectors). The visual examination checks the identification, appearance, workmanship and finish of an item against the relevant specification.

    General Product Information - (Show below) - (Hide below)

    Committee TC 48/SC 48B
    Development Note Stability Date: 2017. (10/2012)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    I.S. EN 60512-16-8:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-8: MECHANICAL TESTS ON CONNECTIONS AND TERMINATIONS - TEST 16H: INSULATING GRIP EFFECTIVENESS (CRIMPED CONNECTIONS)
    I.S. EN 60512-16-13:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-13: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16M: UN-WRAPPING, SOLDERLESS WRAPPED CONNECTIONS
    NF EN 60512-16-13 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-13: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16M: UN-WRAPPING, SOLDERLESS WRAPPED CONNECTIONS
    BS EN IEC 60512-15-2:2018 Connectors for electrical and electronic equipment. Tests and measurements Connector tests (mechanical). Test 15b: Insert retention in housing (axial)
    08/30178258 DC : DRAFT FEB 2008 BS EN 60512-8-3 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 8-3: STATIC LOAD TESTS (FIXED COMPONENTS) - TEST 8C: ROBUSTNESS OF ACTUATING LEVER
    CEI EN 60512-17-4 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-4: CABLE CLAMPING TESTS - TEST 17D: CABLE CLAMP RESISTANCE TO CABLE TORSION
    CEI EN 60512-14-2 : 2007 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 14-2: SEALING TESTS - TEST 14B: SEALING - FINE AIR LEAKAGE
    BS EN 60512-16-9:2008 Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16i. Grounding contact spring holding force
    NF EN 60512-15-2 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-2: CONNECTOR TESTS (MECHANICAL) - TEST 15B: INSERT RETENTION IN HOUSING (AXIAL)
    CEI EN 60512-11-3 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-3: CLIMATIC TESTS TEST 11C: DAMP HEAT, STEADY STATE
    14/30295302 DC : 0 BS EN 61587-1 ED. 4.0 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITIONS
    BS ISO/IEC 11801-1:2017 Information technology. Generic cabling for customer premises General requirements
    I.S. EN 60512-9-1:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-1: ENDURANCE TESTS - TEST 9A: MECHANICAL OPERATION
    CEI EN 60512-11-9 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-9: CLIMATIC TESTS TEST 11I: DRY HEAT
    09/30208429 DC : 0 BS EN 50467 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
    02/209663 DC : DRAFT OCT 2002 IEC 60512-13-1, ED. 2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - BASIC TESTING AND MEASUREMENTS - PART 13-1 - TEST 13A: ENGAGING AND SEPARATING FORCES
    BS EN 60512-14-2:2006 Connectors for electronic equipment. Tests and measurements Sealing tests - Test 14b. Sealing. Fine air leakage
    15/30330884 DC : 0 BS EN 60512-15-2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-2: CONNECTOR TESTS (MECHANICAL) - TEST 15B: INSERT RETENTION IN HOUSING (AXIAL)
    CEI EN 60512-99-001 : 2013 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 99-001: TEST SCHEDULE FOR ENGAGING AND SEPARATING CONNECTORS UNDER ELECTRICAL LOAD - TEST 99A: CONNECTORS USED IN TWISTED PAIR COMMUNICATION CABLING WITH REMOTE POWER
    BS EN 60512-8-3:2011 Connectors for electronic equipment. Tests and measurements Static load tests (fixed connectors). Test 8c. Robustness of actuating lever
    I.S. EN 60512-11-10:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-10: CLIMATIC TESTS - TEST 11J: COLD
    NF EN 60512-16-7 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-7: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16G: MEASUREMENT OF CONTACT DEFORMATION AFTER CRIMPING
    CEI EN 60512-11-11 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-11: CLIMATIC TESTS - TEST 11K: LOW AIR PRESSURE
    BS EN 60512-15-5:2008 Connectors for electronic equipment. Tests and measurements Connector tests (mechanical). Test 15e. Contact retention in insert, cable nutation
    I.S. EN 60512-16-5:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-5: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16E: GAUGE RETENTION FORCE (RESILIENT CONTACTS)
    08/30178254 DC : DRAFT FEB 2008 BS EN 60512-8-2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 8-2: STATIC LOAD TESTS (FIXED COMPONENTS) - TEST 8B: STATIC LOAD, AXIAL
    BS EN 60512-12-5:2006 Connectors for electronic equipment. Tests and measurements Soldering tests. Test 12e. Resistance to soldering heat, soldering iron method
    08/30178418 DC : DRAFT FEB 2008 BS EN 60512-17-3 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-3: CABLE CLAMPING TESTS - TEST 17C: CABLE CLAMP RESISTANCE TO CABLE PULL (TENSILE)
    BS EN 60512-15-3:2008 Connectors for electronic equipment. Tests and measurements Connector tests (mechanical). Test 15c. Insert retention in housing (torsional)
    BS EN 60512-16-13:2008 Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16m. Un-wrapping, solderless wrapped connections
    04/30112330 DC : 0 IEC 61076-3-113 ED.1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-113: SCREENED, SERIAL MULTI-CONDUCTOR CABLE TO BOARD CONNECTORS SUITABLE FOR 10 GBIT/SEC DATA RATES
    BS EN 60512-15-4:2008 Connectors for electronic equipment. Tests and measurements Connector tests (mechanical). Test 15d. Contact insertion, release and extraction force
    I.S. EN 60512-6-1:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 6-1: DYNAMIC STRESS TESTS - TEST 6A: ACCELERATION, STEADY STATE
    NF EN 60512-15-7 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-7: CONNECTOR TESTS (MECHANICAL) - TEST 15G: ROBUSTNESS OF PROTECTIVE COVER ATTACHMENT
    CEI EN 60512-6-1 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 6-1: DYNAMIC STRESS TESTS - TEST 6A: ACCELERATION, STEADY STATE
    BS EN 60130-9:2011 Connectors for frequencies below 3 MHz Circular connectors for radio and associated sound equipment
    BS EN 60512-13-2:2006 Connectors for electronic equipment. Tests and measurements Mechanical operation tests. Test 13b. Insertion and withdrawal forces
    03/100395 DC : DRAFT APR 2003 EN 175101-809 - DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY
    15/30327728 DC : 0 BS EN 60512-99-002 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 99-002: ENDURANCE TEST SCHEDULES - TEST 99B: TEST SCHEDULE FOR ENGAGING AND SEPARATING CONNECTORS UNDER ELECTRICAL LOAD CONNECTORS
    BS EN 60512-6-3:2002 Connectors for electronic equipment. Tests and measurements. Dynamic stress tests Test 6c. Shock
    BS EN 60512-11-12:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11m. Damp heat, cyclic
    CEI EN 60512-16-4 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS PART 16-4: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16D: TENSILE STRENGTH (CRIMPED CONNECTIONS)
    NF EN 60512-15-4 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-4: CONNECTOR TESTS (MECHANICAL) - TEST 15D: CONTACT INSERTION, RELEASE AND EXTRACTION FORCE
    CEI EN 60512-5-1 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 5-1: CURRENT-CARRYING CAPACITY TESTS - TEST 5A: TEMPERATURE RISE
    UNE-EN 50467:2012 Railway applications - Rolling stock - Electrical connectors, requirements and test methods
    I.S. EN 60512-8-2:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 8-2: STATIC LOAD TESTS (FIXED CONNECTORS) - TEST 8B: STATIC LOAD, AXIAL
    I.S. EN 60512-16-11:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-11: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16K: STRIPPING FORCE, SOLDERLESS WRAPPED CONNECTIONS
    I.S. EN 60130-9:2011 CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 9: CIRCULAR CONNECTORS FOR RADIO AND ASSOCIATED SOUND EQUIPMENT
    CEI EN 60512-12-5 : 2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-5: SOLDERING TESTS - TEST 12E: RESISTANCE TO SOLDERING HEAT, IRON METHOD
    CEI EN 60512-15-2 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-2: CONNECTOR TESTS (MECHANICAL) - TEST 15B: INSERT RETENTION IN HOUSING (AXIAL)
    I.S. EN 60512-15-2:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-2: CONNECTOR TESTS (MECHANICAL) - TEST 15B: INSERT RETENTION IN HOUSING (AXIAL)
    I.S. EN IEC 60512-15-2:2018 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-2: CONNECTOR TESTS (MECHANICAL) - TEST 15B: INSERT RETENTION IN HOUSING (AXIAL)
    I.S. EN 60512-7-2:2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 7-2: IMPACT TESTS (FREE CONNECTORS) - TEST 7B: MECHANICAL STRENGTH IMPACT (IEC 60512-7-2:2011 (EQV))
    I.S. EN 60512-6-4:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 6-4: DYNAMIC STRESS TESTS - TEST 6D: VIBRATION (SINUSOIDAL)
    I.S. EN 60512-8-1:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 8-1: STATIC LOAD TESTS (FIXED CONNECTORS) - TEST 8A: STATIC LOAD, TRANSVERSE
    I.S. EN 50467:2011 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
    CEI EN 60512-15-7 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-7: CONNECTOR TESTS (MECHANICAL) - TEST 15G: ROBUSTNESS OF PROTECTIVE COVER ATTACHMENT
    CEI EN 60512-14-5 : 2007 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 14-5: SEALING TESTS - TEST 14E: IMMERSION - LOW (AIR) PRESSURE
    CEI EN 60512-16-16 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-16: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16P: TORSIONAL STRENGTH, FIXED MALE TABS
    I.S. EN 60512-12-3:2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-3: SOLDERING TESTS - TEST 12C: SOLDERABILITY, DE-WETTING
    I.S. EN 60512-11-12:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-12: CLIMATIC TESTS - TEST 11M: DAMP HEAT, CYCLIC
    I.S. EN 60512-16-3:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-3: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16C: CONTACT-BENDING STRENGTH
    CEI EN 60512-14-4 : 2007 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 14-4: SEALING TESTS - TEST 14D: IMMERSION - WATERPROOF
    CEI EN 60512-16-18 : 2009 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-18: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16R: DEFLECTION OF CONTACTS, SIMULATION
    CEI EN 60512-16-9 : 2009 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-9: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16I: GROUNDING CONTACT SPRING HOLDING FORCE
    NF EN 60512-17-3 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-3: CABLE CLAMPING TESTS - TEST 17C: CABLE CLAMP RESISTANCE TO CABLE PULL (TENSILE)
    NF EN 60512-15-3 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-3: CONNECTOR TESTS (MECHANICAL) - TEST 15C: INSERT RETENTION IN HOUSING (TORSIONAL)
    IEC 60512-11-7:2003 Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test
    NF EN 60512-7-1 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 7-1: IMPACT TESTS (FREE CONNECTORS) - TEST 7A: FREE FALL (REPEATED)
    CEI EN 60512-16-13 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-13: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16M: UNWRAPPING, SOLDERLESS WRAPPED CONNECTIONS
    I.S. EN 60512-12-2:2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-2: SOLDERING TESTS - TEST 12B: SOLDERABILITY, WETTING, SOLDERING IRON METHOD
    I.S. EN 60512-6-2:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 6-2: DYNAMIC STRESS TESTS - TEST 6B: BUMP
    I.S. EN 60512-17-4:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-4: CABLE CLAMPING TESTS - TEST 17D: CABLE CLAMP RESISTANCE TO CABLE TORSION
    I.S. EN 60512-14-4:2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 14-4: SEALING TESTS - TEST 14D: IMMERSION - WATERPROOF
    IEC 60512-11-6:2002 Connectors for electronic equipment - Tests and measurements - Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist
    EN 60512-5-1 : 2002 Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise
    EN 60512-9-3:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-3: ENDURANCE TESTS - TEST 9C: MECHANICAL OPERATION (ENGAGING/SEPARATING) WITH ELECTRICAL LOAD
    EN 60512-15-3:2008 Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional)
    EN 60512-14-4:2006 Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof
    EN 60512-13-1:2006/corrigendum Dec. 2006 Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces
    EN 60512-15-4:2008 Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force
    EN 60512-17-3 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-3: CABLE CLAMPING TESTS - TEST 17C: CABLE CLAMP RESISTANCE TO CABLE PULL (TENSILE)
    EN 60512-15-2 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-2: CONNECTOR TESTS (MECHANICAL) - TEST 15B: INSERT RETENTION IN HOUSING (AXIAL)
    EN 60512-16-6:2008 Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations
    EN 60512-11-12 : 2002 Connectors for electronic equipment - Tests and measurements - Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic
    EN 60512-8-2:2011 Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial
    EN 60512-15-7:2008 Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment
    EN 60512-16-18 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-18: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16R: DEFLECTION OF CONTACTS, SIMULATION
    EN 60512-13-5:2006/corrigendum Dec. 2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 13-5: MECHANICAL OPERATION TESTS - TEST 13E: POLARIZING AND KEYING METHOD
    EN 60512-16-4:2008 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)
    EN 60512-17-1:2010 Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness
    EN 60512-11-7:2003 Connectors for electronic equipment - Tests and measurements - Part 11- 7: Climatic tests - Test 11g: Flowing mixed gas corrosion test
    EN 60512-11-9:2002 Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat
    EN 60512-16-1 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-1: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16A: PROBE DAMAGE
    EN 60512-11-10:2002 Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold
    EN 60512-16-11 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-11: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16K: STRIPPING FORCE, SOLDERLESS WRAPPED CONNECTIONS
    EN 60512-15-1 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-1: CONNECTOR TESTS (MECHANICAL) - TEST 15A: CONTACT RETENTION IN INSERT
    EN 60512-16-13 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-13: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16M: UN-WRAPPING, SOLDERLESS WRAPPED CONNECTIONS
    EN 60512-13-2 : 2006 COR 2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 13-2: MECHANICAL OPERATION TESTS - TEST 13B: INSERTION AND WITHDRAWAL FORCES
    CEI EN 60512-12-3 : 2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-3: SOLDERING TESTS - TEST 12C: SOLDERABILITY, DE-WETTING
    NF EN 60512-15-1 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-1: CONNECTOR TESTS (MECHANICAL) - TEST 15A: CONTACT RETENTION IN INSERT
    02/209660 DC : DRAFT OCT 2002 IEC 60512-12-3, ED. 1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT BASIC TESTING AND MEASUREMENTS - PART 12-3 - TEST 12C: SOLDERABILITY, DE-WETTING
    I.S. EN IEC 60512-8-3:2018 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 8-3: STATIC LOAD TESTS (FIXED CONNECTORS) - TEST 8C: ROBUSTNESS OF ACTUATING LEVER
    NF EN 60512-9-1 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-1: ENDURANCE TESTS - TEST 9A: MECHANICAL OPERATION
    17/30361901 DC : 0 BS EN 61076-3-125 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - DETAIL SPECIFICATION FOR 2-WAY, SHIELDED AND UNSHIELDED, FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION UP TO 600 MHZ WITH CURRENT CARRYING CAPACITY
    BS EN 60512-17-1:2010 Connectors for electronic equipment. Tests and measurements Cable clamping tests. Test 17a. Cable clamp robustness
    BS EN 60512-8-1:2010 Connectors for electronic equipment. Tests and measurements Static load tests (fixed connectors). Test 8a. Static load, transverse
    BS EN 60512-11-10:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11j. Cold
    BS EN 60512-12-1:2006 Connectors for electronic equipment. Tests and measurements Soldering tests - Test 12a. Solderability, wetting, solder bath method
    18/30372805 DC : DRAFT APR 2018 BS EN 60512-11-1 - ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT - BASIC TESTING PROCEDURES AND MEASURING METHODS - PART 11: CLIMATIC TESTS - SECTION 1: TEST 11A - CLIMATIC SEQUENCE
    NF EN 60512-16-14 : 2009 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-14: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16N: BENDING STRENGTH, FIXED MALE TABS
    NF EN 60512 11-7 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-7: CLIMATIC TESTS - TEST 11G: FLOWING MIXED GAS CORROSION TEST
    BS EN 60512-9-5:2010 Connectors for electronic equipment. Tests and measurements Endurance tests. Test 9e. Current loading, cyclic
    PD IEC/TS 62282-7-2:2014 Fuel cell technologies Test methods. Single cell and stack performance tests for solid oxide fuel cells (SOFC)
    I.S. EN 60512-15-5:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-5: CONNECTOR TESTS (MECHANICAL) - TEST 15E: CONTACT RETENTION IN INSERT, CABLE NUTATION
    I.S. EN 60512-13-2:2006/AC:2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 13-2: MECHANICAL OPERATION TESTS - TEST 13B: INSERTION AND WITHDRAWAL FORCES
    NF EN 60512-17-4 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-4: CABLE CLAMPING TESTS - TEST 17D: CABLE CLAMP RESISTANCE TO CABLE TORSION
    BS EN 60512-15-6:2008 Connectors for electronic equipment. Tests and measurements Connector tests (mechanical). Test 15f. Effectiveness of connector coupling devices
    CEI EN 50467 : 2013 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
    03/100167 DC : DRAFT JAN 2003 IEC 60603-3-105 ED.1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-105: DETAIL SPECIFICATION FOR 4 PAIR BALANCED, INDIVIDUALLY SHIELDED, FIXED AND FREE CONNECTORS WITH CHARACTERISTIC IMPEDENCE OF 100 OHMS, COVERING A FREQUENCY RANGE FROM DC TO 1500 MHZ
    BS EN 60512-16-4:2008 Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16d. Tensile strength (crimped connections)
    BS EN 60512-11-6:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11f. Corrosion, salt mist
    17/30340055 DC : 0 BS EN 60512-8-3 - CONNECTORS FOR ELECTRONIC EQUIPMENT-TESTS AND MEASUREMENTS - PART 8-3: STATIC LOAD TESTS (FIXED CONNECTORS) TEST 8C: ROBUSTNESS OF ACTUATING LEVER
    CEI EN 60512-9-1 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-1: ENDURANCE TESTS - TEST 9A: MECHANICAL OPERATION
    EN IEC 60512-8-3:2018 Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever
    PREN 50467 : DRAFT 2009 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
    BS EN 60512-16-3:2008 Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16c. Contact-bending strength
    CEI EN 60512-16-5 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-5: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16E: GAUGE RETENTION FORCE (RESILIENT CONTACTS)
    CEI EN 60512-7-2 : 2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 7-2: IMPACT TESTS (FREE COMPONENTS) - TEST 7B: MECHANICAL STRENGTH IMPACT
    I.S. EN 60512-11-7:2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-7: CLIMATIC TESTS - TEST 11G: FLOWING MIXED GAS CORROSION TEST
    NF EN 60512-16-1 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-1: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16A: PROBE DAMAGE
    I.S. EN 60512-5-1:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 5-1: CURRENT-CARRYING CAPACITY TESTS - TEST 5A: TEMPERATURE RISE
    CEI EN 60512-12-1 : 2007 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-1: SOLDERING TESTS - TEST 12A: SOLDERABILITY, WETTING, SOLDER BATH METHOD
    I.S. EN 60512-13-1:2007 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 13-1: MECHANICAL OPERATION TESTS - TEST 13A: ENGAGING AND SEPARATING FORCES
    I.S. EN 60512-6-3:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 6-3: DYNAMIC STRESS TESTS - TEST 6C: SHOCK
    CEI EN 60512-16-8 : 2009 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-8: MECHANICAL TESTS ON CONNECTIONS AND TERMINATIONS - TEST 16H: INSULATING GRIP EFFECTIVENESS (CRIMPED CONNECTIONS)
    I.S. EN 60512-11-6:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-6: CLIMATIC TESTS - TEST 11F: CORROSION, SALT MIST
    I.S. EN 60512-17-2:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-2: CABLE CLAMPING TESTS - TEST 17B: CABLE CLAMP RESISTANCE TO CABLE ROTATION
    CEI EN 60512-9-3 : 2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-3: ENDURANCE TESTS - TEST 9C: MECHANICAL OPERATION (ENGAGING/SEPARATING) WITH ELECTRICAL LOAD
    I.S. EN 60512-16-17:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-17: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16Q: TENSILE AND COMPRESSIVE STRENGTH, FIXED MALE TABS
    BS EN 61587-1:2017 Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297 series Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation
    NF EN 60512-16-17 : 2009 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-17: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16Q: TENSILE AND COMPRESSIVE STRENGTH, FIXED MALE TABS
    I.S. EN 60512-12-4:2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-4: SOLDERING TESTS - TEST 12D: RESISTANCE TO SOLDERING HEAT, SOLDER BATH METHOD
    ISO/IEC 24739-1:2009 Information technology AT Attachment with Packet Interface - 7 Part 1: Register Delivered Command Set, Logical Register Set (ATA/ATAPI-7 V1)
    EN IEC 60512-15-2:2018 Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial)
    IEC 61076-3-104:2017 Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz
    CEI EN 60512-9-2 : 2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-2: ENDURANCE TESTS - TEST 9B: ELECTRICAL LOAD AND TEMPERATURE
    NF EN 60512-15-5 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-5: CONNECTOR TESTS (MECHANICAL) - TEST 15E: CONTACT RETENTION IN INSERT, CABLE NUTATION
    CEI EN 60512-8-2 : 2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 8-2: STATIC LOAD TESTS (FIXED CONNECTORS) - TEST 8B: STATIC LOAD, AXIAL
    IEC 62946-01:2018 Connectors for electrical and electronic equipment - Part 01: Rectangular connectors - Detail specification for 8-way, shielded, free and fixed high density connectors for data transmission with frequencies up to 100 MHz and with current carring capacity up to 1A
    I.S. EN 60512-9-3:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-3: ENDURANCE TESTS - TEST 9C: MECHANICAL OPERATION (ENGAGING/SEPARATING) WITH ELECTRICAL LOAD
    IEC PAS 61076-3-126:2018 Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5 pole power connector for industrial environments with push-pull locking
    I.S. EN 60512-11-11:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-11: CLIMATIC TESTS - TEST 11K: LOW AIR PRESSURE
    IEC 60512-15-1:2008 Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert
    IEC 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength
    IEC 60512-17-1:2010 Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness
    IEC 60512-13-5:2006 Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method
    IEC 60512-19-1:2010 Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels
    02/209659 DC : DRAFT OCT 2001 IEC 60512-12-2, ED. 1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - BASIC TESTING AND MEASUREMENTS - PART 12-2 - TEST 12B: SOLDERABILITY, WETTING, IRON METHOD
    EN 61076-3-122:2017 Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments
    08/30178414 DC : DRAFT FEB 2008 BS EN 60512-17-2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-2: CABLE CLAMPING TESTS - TEST 17B: CABLE CLAMP RESISTANCE TO CABLE ROTATION
    CEI EN 60512-11-13 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENT - PART 11-13: CLIMATIC TESTS - TEST 11N: GAS TIGHTNESS, SOLDERLESS WRAPPED CONNECTIONS
    08/30178299 DC : DRAFT FEB 2008 BS EN 60512-9-4 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-4: ENDURANCE TESTS - TEST 9D: DURABILITY OF CONTACT RETENTION SYSTEM AND SEALS (MAINTENANCE, AGEING)
    BS EN 60512-13-5:2006 Connectors for electronic equipment. Tests and measurements Mechanical operation tests. Test 13e. Polarizing and keying method
    CEI EN 60512-8-3 : 2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS PART 8-3: STATIC LOAD TESTS (FIXED CONNECTORS) - TEST 8C: ROBUSTNESS OF ACTUATING LEVER
    NF EN 60512-16-8 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-8: MECHANICAL TESTS ON CONNECTIONS AND TERMINATIONS - TEST 16H: INSULATING GRIP EFFECTIVENESS (CRIMPED CONNECTIONS)
    08/30178250 DC : DRAFT FEB 2008 BS EN 60512-8-1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 8-1: STATIC LOAD TESTS (FIXED COMPONENTS) - TEST 8A: STATIC LOAD, TRANSVERSE
    BS EN 60512-11-3:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11c. Damp heat, steady state
    BS EN 60512-19-1:2010 Connectors for electronic equipment. Tests and measurements Chemical resistance tests. Test 19a. Fluid resistance of pre-insulated crimp barrels
    BS EN 60512-16-6:2008 Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16f. Robustness of terminations
    02/209662 DC : DRAFT OCT 2002 IEC 60512-12-5, ED. 1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - BASIC TESTING AND MEASUREMENTS - PART 12-5 - TEST 12E: RESISTANCE TO SOLDERING HEAT, IRON METHOD
    02/209661 DC : DRAFT OCT 2002 IEC 60512-12-4, ED. 1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - BASIC TESTING AND MEASUREMENTS - PART 12-4 - TEST 12D: RESISTANCE TO SOLDERING HEAT, SOLDER BATH METHOD
    NF EN 60512-15-6 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-6: CONNECTOR TESTS (MECHANICAL) - TEST 15F: EFFECTIVENESS OF CONNECTOR COUPLING DEVICES
    BS EN 60512-16-17:2008 Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16q. Tensile and compressive strength, fixed male tabs
    BS EN 60512-16-11:2008 Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16k. Stripping force, solderless wrapped connections
    NF EN 60512-16-9 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-9: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16I: GROUNDING CONTACT SPRING HOLDING FORCE
    BS EN 60512-6-1:2002 Connectors for electronic equipment. Tests and measurements. Dynamic stress tests Test 6a. Acceleration, steady state
    BS EN 60512-5-1:2002 Connectors for electronic equipment. Tests and measurements. Current-carrying capacity tests Test 5a. Temperature rise
    DD CLC/TS 50467:2008 Railway applications. Rolling stock. Electrical connectors, requirements and test methods
    BS EN 60512-11-11:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11k. Low air pressure
    BS EN 60512-11-13:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11n. Gas tightness, solderless wrapped connections
    08/30178233 DC : DRAFT FEB 2008 BS EN 60512-7-1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 7-1: IMPACT TESTS (FREE COMPONENTS) - TEST 7A: FREE FALL (REPEATED)
    04/30124126 DC : DRAFT OCT 2004 IEC 61076-2-104 ED.1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-104: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M8 CONNECTORS WITH SCREW OR SNAP-LOCKING FOR LOW VOLTAGE APPLICATIONS
    BS EN 60512-7-2:2012 Connectors for electronic equipment. Tests and measurements Impact tests (free connectors). Test 7b. Mechanical strength impact
    BS EN 60512-14-4:2006 Connectors for electronic equipment. Tests and measurements Sealing tests - Test 14d. Immersion. Waterproof
    CEI EN 61587-1 : 2012 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITION USE AND TRANSPORTATION
    CEI EN 60512-17-2 : 2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-2: CABLE CLAMPING TESTS - TEST 17B: CABLE CLAMP RESISTANCE TO CABLE ROTATION
    BS EN 60512-12-3:2006 Connectors for electronic equipment. Tests and measurements Soldering tests - Solderability, de-wetting
    BS EN 60512-7-1:2010 Connectors for electronic equipment. Tests and measurements Impact tests (free connectors). Test 7a. Free fall (repeated)
    BS EN 60512-11-7:2003 Connectors for electronic equipment. Tests and measurements Flowing mixed gas corrosion test
    BS EN 60512-9-3:2011 Connectors for electronic equipment. Tests and measurements Endurance tests. Test 9c. Mechanical operation (engaging/separating) with electrical load
    NF EN 60512-16-3 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-3: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16C: CONTACT-BENDING STRENGTH
    EN IEC 61076-2-111:2018 Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking
    I.S. EN 60512-16-18:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-18: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16R: DEFLECTION OF CONTACTS, SIMULATION
    I.S. EN 60512-16-9:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-9: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16I: GROUNDING CONTACT SPRING HOLDING FORCE
    I.S. EN 60512-15-4:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-4: CONNECTOR TESTS (MECHANICAL) - TEST 15D: CONTACT INSERTION, RELEASE AND EXTRACTION FORCE
    I.S. EN 60512-11-9:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-9: CLIMATIC TESTS - TEST 11I: DRY HEAT
    I.S. EN 60512-16-14:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-14: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16N: BENDING STRENGTH, FIXED MALE TABS
    I.S. EN 60512-16-4:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-4: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16D: TENSILE STRENGTH (CRIMPED CONNECTIONS)
    I.S. EN 60512-12-5:2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-5: SOLDERING TESTS - TEST 12E: RESISTANCE TO SOLDERING HEAT, SOLDERING IRON METHOD
    I.S. EN 60512-17-1:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-1: CABLE CLAMPING TESTS - TEST 17A: CABLE CLAMP ROBUSTNESS
    I.S. EN 60512-12-1:2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-1: SOLDERING TESTS - TEST 12A: SOLDERABILITY, WETTING,
    I.S. EN 60512-14-2:2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 14-2: SEALING TESTS - TEST 14B: SEALING - FINE AIR LEAKAGE
    I.S. EN 60512-9-2:2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-2: ENDURANCE TESTS - TEST 9B: ELECTRICAL LOAD AND TEMPERATURE (IEC 60512-9-2:2011 (EQV))
    I.S. EN 60512-15-7:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-7: CONNECTOR TESTS (MECHANICAL) - TEST 15G: ROBUSTNESS OF PROTECTIVE COVER ATTACHMENT
    ISO/IEC 24739-2:2009 Information technology AT Attachment with Packet Interface - 7 Part 2: Parallel transport protocols and physical interconnect (ATA/ATAPI-7)
    CEI EN 60512-15-3 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-3: CONNECTOR TESTS (MECHANICAL) - TEST 15C: INSERT RETENTION IN HOUSING (TORSIONAL)
    CEI EN 60512-17-3 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-3: CABLE CLAMPING TESTS - TEST 17C: CABLE CLAMP RESISTANCE TO CABLE PULL (TENSILE)
    CEI EN 60512-15-4 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-4: CONNECTOR TESTS (MECHANICAL) - TEST 15D: CONTACT INSERTION, RELEASE AND EXTRACTION FORCE
    CEI EN 60512-15-1 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-1: CONNECTOR TESTS (MECHANICAL) - TEST 15A: CONTACT RETENTION IN INSERT
    CEI EN 60512-16-11 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-11: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16K: STRIPPING FORCE, SOLDERLESS WRAPPED CONNECTIONS
    NF EN 60512-19-1 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 19-1: CHEMICAL RESISTANCE TESTS - TEST 19A: FLUID RESISTANCE OF PRE-INSULATED CRIMP BARRELS
    I.S. EN 61076-3-104:2017 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-104: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 2000 MHZ
    S.R. CLC/TS 50467:2008 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
    I.S. EN 61587-1:2017 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITION USE AND TRANSPORTATION
    EN 175101-809:2004/corrigendum Jun. 2005 DETAIL SPECIFICATION: TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY
    IEC 60512-13-1:2006 Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces
    IEC 60512-17-4:2010 Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion
    IEC 60512-12-3:2006 Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting
    EN 60512-9-5:2010 Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic
    CEI EN 60512-6-2 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 6-2: DYNAMIC STRESS TESTS TEST 6B: BUMP
    I.S. EN 60512-16-7:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-7: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16G: MEASUREMENT OF CONTACT DEFORMATION AFTER CRIMPING
    BS EN 60512-99-001:2012 Connectors for electronic equipment. Tests and measurements Test schedule for engaging and separating connectors under electrical load. Test 99a: Connectors used in twisted pair communication cabling with remote power
    BS EN 61076-3-122:2017 Connectors for electrical and electronic equipment. Product requirements Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments
    03/100442 DC : DRAFT MAY 2003 IEC 60352-2 ED.2 - SOLDERLESS CONNECTIONS - PART 2: SOLDERLESS CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
    CEI EN 60512-16-17 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-17: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16Q: TENSILE AND COMPRESSIVE STRENGTH, FIXED MALE TABS
    CEI EN 60512-17-1 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-1: CABLE CLAMPING TESTS - TEST 17A: CABLE CLAMP ROBUSTNESS
    BS EN 60512-12-4:2006 Connectors for electronic equipment. Tests and measurements Soldering tests. Test 12d. Resistance to soldering heat, solder bath method
    02/209664 DC : DRAFT OCT 2002 IEC 60512-13-2, ED. 1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - BASIC TESTING AND MEASUREMENTS - PART 13-2 - TEST 13B: INSERTION AND WITHDRAWAL FORCES
    08/30178422 DC : DRAFT FEB 2008 BS EN 60512-17-4 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-4: CABLE CLAMPING TESTS - TEST 17D: CABLE CLAMP RESISTANCE TO CABLE TORSION
    IEC 61587-1:2016 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation
    CEI EN 60512-15-5 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-5: CONNECTOR TESTS (MECHANICAL) - TEST 15E: CONTACT RETENTION IN INSERT, CABLE NUTATION
    02/209665 DC : DRAFT OCT 2002 IEC 60512-13-5, ED. 1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - BASIC TESTING AND MEASUREMENTS - PART 13-5 - TEST 13E: POLARIZING AND KEYING METHOD
    ISO/IEC 11801-1:2017 Information technology — Generic cabling for customer premises — Part 1: General requirements
    BS EN 60512-11-5:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11e. Mould growth
    08/30178276 DC : DRAFT FEB 2008 BS EN 60512-9-1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-1: ENDURANCE TESTS - TEST 9A: MECHANICAL OPERATION
    09/30197932 DC : 0 BS EN 60512-99-001 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 99-001: TEST SCHEDULE FOR MATING AND UN-MATING CONNECTORS UNDER ELECTRICAL LOAD - POWER OVER THE INTERNET (PLUS) POEP, PARTICULARLY APPLICABLE TO IEC 60603-7 SERIES CONNECTORS
    I.S. EN 60512-16-16:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-16: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16P: TORSIONAL STRENGTH, FIXED MALE TABS
    IEC 60512-15-2:2018 Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial)
    I.S. EN 60512-9-4:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-4: ENDURANCE TESTS - TEST 9D: DURABILITY OF CONTACT RETENTION SYSTEM AND SEALS (MAINTENANCE, AGEING)
    BS EN 60512-12-2:2006 Connectors for electronic equipment. Tests and measurements Soldering tests. Test 12b. Solderability, wetting, soldering iron method
    BS EN 60512-16-16:2008 Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16p. Torsional strength, fixed male tabs
    NF EN 60512-16-18 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-18: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16R: DEFLECTION OF CONTACTS, SIMULATION
    I.S. EN 60512-19-1:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 19-1: CHEMICAL RESISTANCE TESTS - TEST 19A: FLUID RESISTANCE OF PRE-INSULATED CRIMP BARRELS
    BS EN 60512-15-7:2008 Connectors for electronic equipment. Tests and measurements Connector tests (mechanical). Test 15g. Robustness of protective cover attachment
    I.S. EN 60512-99-001:2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 99-001: TEST SCHEDULE FOR ENGAGING AND SEPARATING CONNECTORS UNDER ELECTRICAL LOAD - TEST 99A: CONNECTORS USED IN TWISTED PAIR COMMUNICATION CABLING WITH REMOTE POWER (IEC 60512-99-001:2012 (EQV))
    I.S. EN 60512-11-13:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENT - PART 11-13: CLIMATIC TESTS - TEST 11N: GAS TIGHTNESS, SOLDERLESS WRAPPED CONNECTIONS
    BS EN 60512-16-18:2008 Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16r. Deflection of contacts, simulation
    BS EN 60512-9-2:2012 Connectors for electronic equipment. Tests and measurements Endurance tests. Test 9b. Electrical load and temperature
    BS EN 60512-11-4:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11d. Rapid change of temperature
    BS EN 60512-16-2:2008 Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16b. Restricted entry
    08/30178457 DC : DRAFT FEB 2008 BS EN 60512-21-1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 21-1: R.F. RESISTANCE TESTS - TEST 21A: R.F. SHUNT RESISTANCE
    CEI EN 60512-16-3 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-3: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16C: CONTACT-BENDING STRENGTH
    CEI EN 60512-11-5 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-5: CLIMATIC TESTS TEST 11E: MOULD GROWTH
    EN IEC 61076-3-119:2018 Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz
    CEI EN 61076-3-122 : 1ED 2017 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-122: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR I/O AND GIGABIT ETHERNET APPLICATIONS IN HARSH ENVIRONMENTS
    CEI EN 60512-13-2 : 2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 13-2: MECHANICAL OPERATION TESTS - TEST 13B: INSERTION AND WITHDRAWAL FORCES
    BS EN 60512-16-7:2008 Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16g. Measurement of contact deformation after crimping
    BS EN 60512-16-5:2008 Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16e. Gauge retention force (resilient contacts)
    BS EN 60512-15-1:2008 Connectors for electronic equipment. Tests and measurements Connector tests (mechanical). Test 15a. Contact retention in insert
    08/30178461 DC : DRAFT FEB 2008 BS EN 60512-22-1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENT - PART 22-1: CAPACITANCE TESTS - TEST 22A: CAPACITANCE
    CEI EN 60512-19-1 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 19-1: CHEMICAL RESISTANCE TESTS - TEST 19A: FLUID RESISTANCE OF PREINSULATED CRIMP BARRELS
    BS EN 60512-16-1:2008 Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16a. Probe damage
    08/30178306 DC : DRAFT FEB 2008 BS EN 60512-9-5 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-5: ENDURANCE TESTS - TEST 9E: CURRENT LOADING, CYCLIC
    BS EN 60512-9-1:2010 Connectors for electronic equipment. Tests and measurements Endurance tests. Test 9a. Mechanical operation
    16/30325971 DC : 0 BS ISO/IEC 11801-1 - INFORMATION TECHNOLOGY - GENERIC CABLING FOR CUSTOMER PREMISES - PART 1: GENERAL REQUIREMENTS
    I.S. EN 60512-16-6:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-6: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16F: ROBUSTNESS OF TERMINATIONS
    08/30178237 DC : DRAFT FEB 2008 BS EN 60512-7-2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 7-2: IMPACT TESTS (FREE COMPONENTS) - TEST 7B: MECHANICAL STRENGTH IMPACTS AND MEASUREMENTS
    08/30178289 DC : DRAFT FEB 2008 BS EN 60512-9-2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-2: ENDURANCE TESTS - TEST 9B: ELECTRICAL LOAD AND TEMPERATURE
    CEI EN 60512-13-1 : 2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 13-1: MECHANICAL OPERATION TESTS - TEST 13A: ENGAGING AND SEPARATING FORCES
    BS EN 60512-16-8:2008 Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16h. Insulating grip effectiveness (crimped connections)
    02/209669 DC : DRAFT OCT 2002 IEC 60512-14-6 - CONNECTORS FOR ELECTRONIC EQUIPMENT - BASIC TESTING AND MEASUREMENTS - PART 14-6 - TEST 14F: IMMERSION - LOW (AIR) PRESSURE INTERFACIAL
    NF EN 60512-16-2 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-2: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16B: RESTRICTED ENTRY
    BS EN 60512-6-4:2002 Connectors for electronic equipment. Tests and measurements. Dynamic stress tests Test 6d. Vibration (sinusoidal)
    BS EN 60512-15-2:2008 Connectors for electronic equipment. Tests and measurements Connector tests (mechanical). Test 15b. Insert retention in housing (axial)
    I.S. EN 60512-15-3:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-3: CONNECTOR TESTS (MECHANICAL) - TEST 15C: INSERT RETENTION IN HOUSING (TORSIONAL)
    I.S. EN 60512-16-1:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-1: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16A: PROBE DAMAGE
    I.S. EN 61076-3-122:2017 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-122: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR I/O AND GIGABIT ETHERNET APPLICATIONS IN HARSH ENVIRONMENTS
    I.S. EN 60512-13-5:2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 13-5: MECHANICAL OPERATION TESTS - TEST 13E: POLARIZING AND KEYING METHOD
    I.S. EN 60512-8-3:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 8-3: STATIC LOAD TESTS (FIXED CONNECTORS) - TEST 8C: ROBUSTNESS OF ACTUATING LEVER
    I.S. EN 60512-16-2:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-2: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16B: RESTRICTED ENTRY
    NF EN 60512-9-5 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-5: ENDURANCE TESTS - TEST 9E: CURRENT LOADING, CYCLIC
    NF EN 60512-16-5 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-5: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16E: GAUGE RETENTION FORCE (RESILIENT CONTACTS)
    NF EN 60512-8-1 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 8-1: STATIC LOAD TESTS (FIXED CONNECTORS) - TEST 8A: STATIC LOAD, TRANSVERSE
    CEI EN 60512-13-5 : 2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 13-5: MECHANICAL OPERATION TESTS - TEST 13E: POLARIZING AND KEYING METHOD
    I.S. EN 60512-15-6:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-6: CONNECTOR TESTS (MECHANICAL) - TEST 15F: EFFECTIVENESS OF CONNECTOR COUPLING DEVICES
    IEC 60512-8-3:2018 Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever
    IEC 60512-6-4:2002 Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal)
    IEC 60512-9-5:2010 Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic
    IEC 60512-12-5:2006 Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method
    IEC 60512-11-10:2002 Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold
    IEC 60512-16-17:2008 Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs
    IEC 60512-7-1:2010 Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)
    IEC 60512-16-18:2008 Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation
    EN 60512-12-3:2006/corrigendum Dec. 2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-3: SOLDERING TESTS - TEST 12C: SOLDERABILITY, DE-WETTING
    IEC 60512-16-13:2008 Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections
    IEC 60512-14-2:2006 Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage
    IEC 60512-6-1:2002 Connectors for electronic equipment - Tests and measurements - Part 6-1: Dynamic stress tests - Test 6a: Acceleration, steady state
    IEC 60512-11-3:2002 Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state
    IEC 60512-13-2:2006 Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces
    IEC 60512-16-7:2008 Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping
    IEC 60512-7-2:2011 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free components) - Test 7b: Mechanical strength impact
    IEC 60512-14-4:2006 Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof
    IEC 60512-11-11:2002 Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests - Test 11k: Low air pressure
    IEC 60512-12-2:2006 Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method
    IEC 60512-9-2:2011 Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature
    IEC 60512-99-001:2012 Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power
    IEC 60512-9-1:2010 Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation
    IEC 60512-11-13:2002 Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections
    IEC 60512-15-6:2008 Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices
    IEC 60512-15-3:2008 Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional)
    IEC 60512-8-1:2010 Connectors for electronic equipment - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse
    IEC 60512-15-4:2008 Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force
    IEC 60512-16-1:2008 Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage
    IEC 60512-11-9:2002 Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat
    IEC 60512-17-3:2010 Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)
    IEC 60512-17-2:2011 Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation
    IEC 60512-11-5:2002 Connectors for electronic equipment - Tests and measurements - Part 11-5: Climatic tests - Test 11e: Mould growth
    IEC 60512-6-3:2002 Connectors for electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests - Test 6c: Shock
    IEC 60130-9:2011 Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment
    IEC 60512-8-2:2011 Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial
    IEC 60512-6-2:2002 Connectors for electronic equipment - Tests and measurements - Part 6-2: Dynamic stress tests - Test 6b: Bump
    IEC 60512-16-16:2008 Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs
    IEC 60512-16-6:2008 Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations
    IEC 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)
    IEC 60512-15-7:2008 Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment
    IEC 60512-11-4:2002 Connectors for electronic equipment - Tests and measurements - Part 11-4: Climatic tests - Test 11d: Rapid change of temperature
    IEC 60512-9-4:2011 Connectors for electronic equipment - Tests and measurements - Part 9-4: Endurance tests - Test 9d: Durability of contact retention system and seals (maintenance, ageing)
    IEC 60512-16-14:2008 Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs
    IEC 60512-5-1:2002 Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise
    IEC 60512-14-5:2006 Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure
    IEC 60512-9-3:2011 Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging and separating) with electrical load
    IEC 60512-16-2:2008 Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry
    IEC 60512-12-4:2006 Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method
    CLC/TS 50467 : 2008 COR 2008 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
    I.S. EN 60512-11-4:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-4: CLIMATIC TESTS - TEST 11D: RAPID CHANGE OF TEMPERATURE
    17/30340059 DC : 0 BS EN 61076-3-119 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR UNSHIELDED, FREE AND FIXED 10 WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS WITH FREQUENCIES UP TO 100 MHZ
    I.S. EN 60512-14-5:2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 14-5: SEALING TESTS - TEST 14E: IMMERSION AT LOW AIR PRESSURE
    BS EN 60512-8-2:2011 Connectors for electronic equipment. Tests and measurements Static load tests (fixed connectors). Test 8b. Static load, axial
    EN 61587-1:2017 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation
    CEI EN 60512-16-2 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-2: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16B: RESTRICTED ENTRY
    08/30178449 DC : DRAFT FEB 2008 BS EN 60512-20-1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 20-1: FIRE HAZARD TESTS - TEST 20A: FLAMMABILITY, NEEDLE-FLAME
    BS EN 60512-17-4:2010 Connectors for electronic equipment. Tests and measurements Cable clamping tests. Test 17d. Cable clamp resistance to cable torsion
    17/30334978 DC : 0 BS EN 62946-01 ED 1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 01: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED HIGH DENSITY CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ AND WITH CURRENT CARRING CAPACITY UP TO 1A
    02/209658 DC : DRAFT OCT 2002 IEC 60512-12-1, ED. 1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - BASIC TESTING AND MEASUREMENTS - PART 12-1 - TEST 12A: SOLDERABILITY, WETTING, SOLDER BATH METHOD
    CEI EN 60512-15-6 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-6: CONNECTOR TESTS (MECHANICAL) - TEST 15F: EFFECTIVENESS OF CONNECTOR COUPLING DEVICES
    CEI EN 60512-9-4 : 2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-4: ENDURANCE TESTS - TEST 9D: DURABILITY OF CONTACT RETENTION SYSTEM AND SEALS (MAINTENANCE, AGEING)
    CEI EN 60512-11-7 : 2004 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11- 7: CLIMATIC TESTS - TEST 11G: FLOWING MIXED GAS CORROSION TEST
    CEI EN 60512-11-10 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-10: CLIMATIC TESTS - TEST 11J: COLD
    CEI EN 60512-6-4 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS PART 6-4: DYNAMIC STRESS TESTS TEST 6D: VIBRATION (SINUSOIDAL)
    BS EN 60512-17-3:2010 Connectors for electronic equipment. Tests and measurements Cable clamping tests. Test 17c. Cable clamp resistance to cable pull (tensile)
    08/30188248 DC : DRAFT AUG 2008 BS EN 60512-9-3 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-3: ENDURANCE TESTS - TEST 9C - MECHANICAL OPERATION (ENGAGING/SEPARATING) WITH ELECTRICAL LOAD
    08/30178453 DC : DRAFT FEB 2008 BS EN 60512-20-3 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENT - PART 20-3: FIRE HAZARD TESTS - TEST 20C: FLAMMABILITY, GLOW-WIRE
    BS EN 60512-13-1:2006 Connectors for electronic equipment. Tests and measurements Mechanical operation tests. Test 13a: Engaging and separating forces
    03/100168 DC : DRAFT JAN 2003 IEC 61076-3-112 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-112: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION - RECTANGULAR CONNECTORS WITH FOUR CONTACTS FOR HIGH PERFORMANCE SERIAL BUS FOR CONSUMER AUDIO/VIDEO EQUIPMENT
    04/30124122 DC : DRAFT OCT 2004 IEC 61076-2-101 ED.2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-101: CIRCULAR CONNECTORS. DETAIL SPECIFICATION FOR M12 CONNECTORS WITH SCREW-LOCKING FOR LOW VOLTAGE APPLICATIONS
    CEI EN 60512-12-2 : 2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-2: SOLDERING TESTS - TEST 12B: SOLDERABILITY, WETTING, SOLDERING IRON METHOD
    CEI EN 60512-16-14 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-14: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16N: BENDING STRENGTH, FIXED MALE TABS
    I.S. EN 60512-15-1:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-1: CONNECTOR TESTS (MECHANICAL) - TEST 15A: CONTACT IN INSERT
    I.S. EN 60512-9-5:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-5: ENDURANCE TESTS - TEST 9E: CURRENT LOADING, CYCLIC
    BS EN 60512-14-5:2006 Connectors for electronic equipment. Tests and measurements Sealing tests - Test 14e. Immersion at low air pressure
    BS EN 50467:2011 Railway applications. Rolling stock. Electrical connectors, requirements and test methods
    08/30178410 DC : DRAFT FEB 2008 BS EN 60512-17-1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-1: CABLE CLAMPING TESTS - TEST 17A: CABLE CLAMP ROBUSTNESS
    08/30178445 DC : DRAFT FEB 2008 BS EN 60512-19-1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 19-1: CHEMICAL RESISTANCE TESTS - TEST 19A: FLUID RESISTANCE OF PRE-INSULATED CRIMP BARRELS
    BS EN 60512-16-14:2008 Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16n. Bending strength, fixed male tabs
    BS EN 175101-809:2004 Harmonized system of quality assessment for electronic components. Detail specification Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality
    BS EN 60512-17-2:2011 Connectors for electronic equipment. Tests and measurements Cable clamping tests. Test 17b. Cable clamp resistance to cable rotation
    BS EN 60512-11-9:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11i. Dry heat
    BS EN 61076-3-104:2017 Connectors for electrical and electronic equipment. Product requirements Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz
    BS EN 60512-9-4:2011 Connectors for electronic equipment. Tests and measurements Endurance tests. Test 9d. Durability of contact retention system and seals (maintenance, ageing)
    CEI EN 60512-16-6 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-6: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16F: ROBUSTNESS OF TERMINATIONS
    03/100365 DC : DRAFT APR 2003 IEC 60512-9-3 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-3: TEST 9C - MECHANICAL OPERATION WITH ELECTRICAL LOAD
    CEI EN 60512-6-3 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENT - PART 6-3: DYNAMIC STRESS TESTS TEST 6C: SHOCK
    BS EN 60512-6-2:2002 Connectors for electronic equipment. Tests and measurements. Dynamic stress tests Test 6b. Bump
    CEI EN 60512-9-5 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-5: ENDURANCE TESTS - TEST 9E: CURRENT LOADING, CYCLIC
    I.S. EN 60512-17-3:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-3: CABLE CLAMPING TESTS - TEST 17C: CABLE CLAMP RESISTANCE TO CABLE PULL (TENSILE)
    CEI EN 60130-9 : 2012 CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 9: CIRCULAR CONNECTORS FOR RADIO AND ASSOCIATED SOUND EQUIPMENT
    NF EN 60512-16-4 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-4: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16D: TENSILE STRENGTH (CRIMPED CONNECTIONS)
    NF EN 60512-16-16 : 2009 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-16: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16P: TORSIONAL STRENGTH, FIXED MALE TABS
    NF EN 60512 13-1 : 2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 13-1: MECHANICAL OPERATION TESTS - TEST 13A: ENGAGING AND SEPARATING FORCES
    NF EN 60512-17-1 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-1: CABLE CLAMPING TESTS - TEST 17A: CABLE CLAMP ROBUSTNESS
    I.S. EN IEC 61076-3-119:2018 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR SHIELDED AND UNSHIELDED, FREE AND FIXED 10-WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ
    CEI EN 60512-11-6 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS PART 11-6: CLIMATIC TESTS TEST 11F: CORROSION, SALT MIST
    CEI EN 60512-8-1 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS PART 8-1: STATIC LOAD TESTS (FIXED CONNECTORS) - TEST 8A: STATIC LOAD, TRANSVERSE
    I.S. EN IEC 61076-2-111:2018 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-111: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR POWER CONNECTORS WITH M12 SCREW-LOCKING
    CEI EN 60512-16-7 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-7: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16G: MEASUREMENT OF CONTACT DEFORMATION AFTER CRIMPING
    I.S. EN 60512-11-5:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-5: CLIMATIC TESTS - TEST 11E: MOULD GROWTH
    NF EN 60512-16-11 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-11: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16K: STRIPPING FORCE, SOLDERLESS WRAPPED CONNECTIONS
    NF EN 60512-16-6 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-6: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16F: ROBUSTNESS OF TERMINATIONS
    CEI EN 60512-12-4 : 2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS -PART 12-4: SOLDERING TESTS - TEST 12D: RESISTANCE TO SOLDERING HEAT, SOLDER BATH METHOD
    CEI EN 60512-7-1 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 7-1: IMPACT TESTS (FREE CONNECTORS) - TEST 7A: FREE FALL (REPEATED)
    CEI EN 60512-16-1 : 2009 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-1: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16A: PROBE DAMAGE
    NF EN 50467 : 2012 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
    CEI EN 60512-11-12 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-12: CLIMATIC TESTS - TEST 11M: DAMP HEAT, CYCLIC
    CEI EN 60512-11-4 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS PART 11-4: CLIMATIC TESTS TEST 11D: RAPID CHANGE OF TEMPERATURE
    I.S. EN 60512-11-3:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-3: CLIMATIC TESTS - TEST 11C: DAMP HEAT, STEADY STATE
    I.S. EN 175101-809:2004 DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2.54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75101-801, WITH ASSESSED QUALITY
    I.S. EN 60512-7-1:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 7-1: IMPACT TESTS (FREE CONNECTORS) - TEST 7A: FREE FALL (REPEATED)
    ISO/IEC 24739-3:2010 Information technology AT Attachment with Packet Interface - 7 Part 3: Serial transport protocols and physical interconnect (ATA/ATAPI-7 V3)
    IEC 62847:2016 Railway applications - Rolling stock - Electrical connectors - Requirements and test methods
    EN 61076-3-104:2017 Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz
    IEC 60512-12-1:2006 Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method
    IEC 60512-11-12:2002 Connectors for electronic equipment - Tests and measurements - Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic
    IEC 60512-16-4:2008 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)
    IEC 60512-16-8:2008 Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections)
    IEC 60512-16-11:2008 Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections
    IEC 60512-15-5:2008 Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation
    IEC 60512-16-9:2008 Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force
    EN 60512-7-2:2012 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact
    EN 60512-6-2:2002 Connectors for electronic equipment - Tests and measurements - Part 6-2: Dynamic stress tests - Test 6b: Bump
    EN 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)
    EN 60512-12-5:2006/corrigendum:2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-5: SOLDERING TESTS - TEST 12E: RESISTANCE TO SOLDERING HEAT, SOLDERING IRON METHOD
    EN 60512-19-1:2010 Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels
    EN 60130-9:2011 Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment
    EN 60512-16-7 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-7: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16G: MEASUREMENT OF CONTACT DEFORMATION AFTER CRIMPING
    EN 60512-8-3:2011 Connectors for electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever
    EN 60512-11-4:2002 Connectors for electronic equipment - Tests and measurements - Part 11-4: Climatic tests - Test 11d: Rapid change of temperature
    EN 60512-16-2 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-2: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16B: RESTRICTED ENTRY
    EN 60512-9-2:2012 Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature
    EN 60512-16-16 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-16: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16P: TORSIONAL STRENGTH, FIXED MALE TABS
    EN 60512-12-2:2006/corrigendum Dec. 2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-2: SOLDERING TESTS - TEST 12B: SOLDERABILITY, WETTING, SOLDERING IRON METHOD
    EN 60512-15-5 : 2008 Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation
    EN 60512-9-4:2011 Connectors for electronic equipment - Tests and measurements - Part 9-4: Endurance tests - Test 9d: Durability of contact retention system and seals (maintenance, ageing)
    EN 60512-17-4 : 2010 Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion
    EN 60512-7-1:2010 Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)
    EN 60512-16-8 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-8: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16H: INSULATING GRIP EFFECTIVENESS (CRIMPED CONNECTIONS)
    EN 60512-9-1 : 2010 Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation
    EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength
    EN 60512-16-9 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-9: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16I: GROUNDING CONTACT SPRING HOLDING FORCE
    EN 60512-11-6:2002 Connectors for electronic equipment - Tests and measurements - Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist
    EN 60512-11-3:2002 Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state
    EN 60512-15-6:2008 Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices
    EN 60512-11-5 : 2002 Connectors for electronic equipment - Tests and measurements - Part 11-5: Climatic tests - Test 11e: Mould growth
    EN 60512-14-5:2006 Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure
    EN 50467 : 2011 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
    EN 60512-6-4:2002 Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal)
    EN 60512-8-1:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 8-1: STATIC LOAD TESTS (FIXED CONNECTORS) - TEST 8A: STATIC LOAD, TRANSVERSE
    EN 60512-6-1:2002 Connectors for electronic equipment - Tests and measurements - Part 6-1: Dynamic stress tests - Test 6a: Acceleration, steady state
    EN 60512-11-13:2002 Connectors for electronic equipment - Tests and measurement - Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections
    EN 60512-6-3:2002 Connectors for electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests - Test 6c: Shock
    EN 60512-12-4:2006/corrigendum:2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-4: SOLDERING TESTS - TEST 12D: RESISTANCE TO SOLDERING HEAT, SOLDER BATH METHOD
    EN 60512-14-2:2006 Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage
    EN 60512-16-17:2008 Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs
    EN 60512-99-001:2012 Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power
    EN 60512-12-1:2006 Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method
    EN 60512-16-14 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-14: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16N: BENDING STRENGTH, FIXED MALE TABS
    EN 60512-11-11:2002 Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests - Test 11k: Low air pressure
    EN 60512-17-2 : 2011 Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective