Skip to content
Please enter a keyword to search

  • IEC 60605-2:1994

    Current The latest, up-to-date edition.

    Equipment reliability testing - Part 2: Design of test cycles

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English - French, Spanish, Castilian

    Published date:  12-10-1994

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Contents
    Foreword
    Introduction
    Clause
    1. Scope
    2. Normative references
    3. Definitions
    4. Relations between test conditions and conditions
        of use
    5. Description of the conditions of use
        5.1 Operating conditions
        5.2 Environmental conditions
        5.3 Interrelationship between operating and
             environmental parameters
    6. Procedure for the design of test cycles
    7. Summary of documentation of a reliability test cycle
    Annex A - Worked example

    Abstract - (Show below) - (Hide below)

    It applies to the design of operating and environmental test cycles referred to in 8.1 and 8.2 of IEC 605-1.

    General Product Information - (Show below) - (Hide below)

    Development Note Also numbered as BS 5760-10.2(1995) (08/2005) Stability Date: 2021. (09/2017)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    I.S. EN 50126-1:2017 RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS
    CEI 56-46 : 2005 DEPENDABILITY MANAGEMENT - PART 3-5: APPLICATION GUIDE - RELIABILITY TEST CONDITIONS AND STATISTICAL TEST PRINCIPLES
    BS EN 61069-5:2016 Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment Assessment of system dependability
    BS EN 62429:2008 Reliability growth. Stress testing for early failures in unique complex systems
    BS EN 61014:2003 PROGRAMMES FOR RELIABILITY GROWTH
    CEI EN 61014 : 2006 PROGRAMMES FOR RELIABILITY GROWTH
    I.S. EN 62506:2013 METHODS FOR PRODUCT ACCELERATED TESTING (IEC 62506:2013 (EQV))
    BS 5760-13.5:1996 RELIABILITY OF SYSTEMS, EQUIPMENT AND COMPONENTS - GUIDE TO RELIABILITY TEST CONDITIONS FOR CONSUMER EQUIPMENT - GROUND MOBILE EQUIPMENT - LOW DEGREE OF SIMULATION
    BIS IS 8161-7 : 2012(R2016) GUIDE FOR EQUIPMENT RELIABILITY TESTING - PART 7: COMPLIANCE TESTS FOR CONSTANT FAILURE RATE AND CONSTANT FAILURE INTENSITY
    BS EN 50155:2017 Railway applications. Rolling stock. Electronic equipment
    IEC 61069-5:2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability
    EN 62506 : 2013 METHODS FOR PRODUCT ACCELERATED TESTING (IEC 62506:2013)
    EN 60300-3-4:2008 Dependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements
    EN 62429:2008 Reliability growth - Stress testing for early failures in unique complex systems
    EN 61124:2012 RELIABILITY TESTING - COMPLIANCE TESTS FOR CONSTANT FAILURE RATE AND CONSTANT FAILURE INTENSITY (IEC 61124:2012)
    BS EN 62506:2013 Methods for product accelerated testing
    BS 5760-10.3:1993 Reliability of systems, equipment and components. Guide to reliability testing Compliance test procedures for steady-state availability
    BS IEC 60300-3.5 : 2001 DEPENDABILITY MANAGEMENT - PART 3-5: APPLICATION GUIDE - RELIABILITY TEST CONDITIONS AND STATISTICAL TEST PRINCIPLES
    NF EN 62429 : 2008 RELIABILITY GROWTH - STRESS TESTING FOR EARLY FAILURES IN UNIQUE COMPLEX SYSTEMS
    UNE-EN 62059-31-1:2010 Electricity metering equipment - Dependability -- Part 31-1: Accelerated reliability testing - Elevated temperature and humidity
    EN 50126-1:2017 Railway Applications - The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 1: Generic RAMS Process
    I.S. EN 50155:2017-11 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRONIC EQUIPMENT
    BS 5760-4:2003 RELIABILITY OF SYSTEMS, EQUIPMENT AND COMPONENTS - PART 4: GUIDE TO THE SPECIFICATION OF DEPENDABILITY REQUIREMENTS
    CEI EN 62429 : 2008 RELIABILITY GROWTH - STRESS TESTING FOR EARLY FAILURES IN UNIQUE COMPLEX SYSTEMS
    12/30187831 DC : 0 BS EN 50126-1 - RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS
    BS EN 62059-31-1:2008 Electricity metering equipment. Dependability Accelerated reliability testing. Elevated temperature and humidity
    CEI EN 62059-31-1 : 2009 ELECTRICITY METERING EQUIPMENT - DEPENDABILITY - PART 31-1: ACCELERATED RELIABILITY TESTING - ELEVATED TEMPERATURE AND HUMIDITY
    BS 5760-13.6:1997 RELIABILITY OF SYSTEMS, EQUIPMENT AND COMPONENTS - GUIDE TO RELIABILITY TEST CONDITIONS FOR CONSUMER EQUIPMENT - OUTDOOR TRANSPORTABLE EQUIPMENT - LOW DEGREE OF SIMULATION
    CEI 56-32 : 2000 COMPLIANCE TEST PROCEDURES FOR STEADY-STATE AVAILABILITY
    IEC 62506:2013 Methods for product accelerated testing
    EN 50155:2017 Railway applications - Rolling stock - Electronic equipment
    CEI EN 62059-41 : 2007 ELECTRICITY METERING EQUIPMENT - DEPENDABILITY - PART 41: RELIABILITY PREDICTION
    BS 5760-13.2:1993 RELIABILITY OF SYSTEMS, EQUIPMENT AND COMPONENTS - GUIDE TO RELIABILITY TEST CONDITIONS FOR CONSUMER EQUIPMENT - CONDITIONS PROVIDING A HIGH DEGREE OF SIMULATION FOR EQUIPMENT FOR STATIONARY USE IN WEATHERPROTECTED LOCATIONS
    BS EN 62059-41:2006 ELECTRICITY METERING EQUIPMENT - DEPENDABILITY - PART 41: RELIABILITY PREDICTION
    PREN 50126-1 : DRAFT 2015 RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS
    CEI EN 62506 : 2014 METHODS FOR PRODUCT ACCELERATED TESTING
    NF EN 61014 : 2003 PROGRAMMES FOR RELIABILITY GROWTH
    CEI EN 60300-3-4 : 2010 DEPENDABILITY MANAGEMENT - PART 3-4: APPLICATION GUIDE - GUIDE TO THE SPECIFICATION OF DEPENDABILITY REQUIREMENTS
    CEI 56-20 : 2000 EQUIPMENT RELIABILITY TESTING - PART 3: PREFERRED TEST CONDITIONS - SECTION 4: TEST CYCLE 4: EQUIPMENT FOR PORTABLE AND NON-STATIONARY USE - LOW DEGREE OF SIMULATION
    I.S. EN 61069-5:2016 INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 5: ASSESSMENT OF SYSTEM DEPENDABILITY
    IEC TR 62063:1999 High-voltage switchgear and controlgear - The use of electronic and associated technologies in auxiliary equipment of switchgear and controlgear
    BS 5760-13.1:1993 RELIABILITY OF SYSTEMS, EQUIPMENT AND COMPONENTS - GUIDE TO RELIABILITY TEST CONDITIONS FOR CONSUMER EQUIPMENT - CONDITIONS PROVIDING A LOW DEGREE OF SIMULATION FOR INDOOR PORTABLE EQUIPMENT
    I.S. EN 61014:2003 PROGRAMMES FOR RELIABILITY GROWTH
    I.S. EN 61124:2012 RELIABILITY TESTING - COMPLIANCE TESTS FOR CONSTANT FAILURE RATE AND CONSTANT FAILURE INTENSITY
    I.S. EN 62059-41:2006 ELECTRICITY METERING EQUIPMENT - DEPENDABILITY - PART 41: RELIABILITY PREDICTION
    UNE-EN 62429:2012 Reliability growth - Stress testing for early failures in unique complex systems
    IEC 61014:2003 Programmes for reliability growth
    IEC 62059-41:2006 Electricity metering equipment - Dependability - Part 41: Reliability prediction
    IEC 61124:2012 Reliability testing - Compliance tests for constant failure rate and constant failure intensity
    UNE-EN 61124:2014 Reliability testing - Compliance tests for constant failure rate and constant failure intensity
    BS 5760-13.4:1993 RELIABILITY OF SYSTEMS, EQUIPMENT AND COMPONENTS - GUIDE TO RELIABILITY TEST CONDITIONS FOR CONSUMER EQUIPMENT - CONDITIONS PROVIDING A LOW DEGREE OF SIMULATION FOR EQUIPMENT FOR PORTABLE AND NON-STATIONARY USE
    UNE-EN 60300-3-4:2011 Dependability management -- Part 3-4: Application guide - Guide to the specification of dependability requirements
    IEC 61070:1991 Compliance test procedures for steady-state availability
    06/30148603 DC : DRAFT APR 2006
    15/30330403 DC : 0 BS EN 50126-1 - RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS
    BS EN 60300-3-4:2008 Dependability management Application guide. Guide to the specification of dependability requirements
    IEC 60605-3-4:1992 Equipment reliability testing - Part 3: Preferred test conditions - Section 4: Test cycle 4: Equipment for portable and non-stationary use - Low degree of simulation
    I.S. EN 62059-31-1:2008 ELECTRICITY METERING EQUIPMENT - DEPENDABILITY - PART 31-1: ACCELERATED RELIABILITY TESTING - ELEVATED TEMPERATURE AND HUMIDITY
    BS EN 61124:2012 Reliability testing. Compliance tests for constant failure rate and constant failure intensity
    I.S. EN 60300-3-4:2008 DEPENDABILITY MANAGEMENT - PART 3-4: APPLICATION GUIDE - GUIDE TO THE SPECIFICATION OF DEPENDABILITY REQUIREMENTS
    I.S. EN 62429:2008 RELIABILITY GROWTH - STRESS TESTING FOR EARLY FAILURES IN UNIQUE COMPLEX SYSTEMS
    IEC 60300-3-5:2001 Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles
    IEC 62429:2007 Reliability growth - Stress testing for early failures in unique complex systems
    IEC 60300-3-4:2007 Dependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements
    EN 61069-5:2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability
    EN 62059-31-1 : 2008 ELECTRICITY METERING EQUIPMENT - DEPENDABILITY - PART 31-1: ACCELERATED RELIABILITY TESTING - ELEVATED TEMPERATURE AND HUMIDITY
    EN 62059-41:2006 Electricity metering equipment - Dependability - Part 41: Reliability prediction
    EN 61014 : 2003 Programmes for reliability growth

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60721-1:1990+AMD1:1992+AMD2:1995 CSV Classification of environmental conditions - Part 1: Environmental parameters and their severities
    AS/NZS IEC 61703:2020 Mathematical expressions for reliability, availability, maintainability and maintenance support terms
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective