IEC 60728-12:2017
Current
The latest, up-to-date edition.
Cable networks for television signals, sound signals and interactive services - Part 12: Electromagnetic compatibility of systems
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
19-06-2017
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviated terms
4 Methods of measurement
5 Performance requirements
Annex A (informative) - Information on legal requirements
in some countries
Annex B (informative) - Frequency ranges of typical safety
of life services
Annex C (informative) - Interdependence between the
maximum allowable field strength and the minimum
signal level at system outlet
Annex D (normative) - Measurements at other distances
than the standard distance of 3 m
Annex E (informative) - GPS based leakage detection system
for cable networks
Bibliography
IEC 60728-12:2017(E) applies to the radiation characteristics and immunity to electromagnetic disturbance of cable networks for television signals, sound signals and interactive services and covers the frequency range 0,15 MHz to 3,5 GHz. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) IEC 60728-12 with its methods of measurement and EMC performance requirements is explicitly dedicated to “under operating conditions (in situ)” to ensure the ongoing EMC integrity of cable networks.
b) The first intermediate frequency range (1st IF range) for satellite signal transmission was extended to cover now frequencies from 950 MHz up to 3 500 MHz.
c) The method of measurement and the requirements for in-band immunity were extended taking into account the new EMC environment due to the allocation of broadband wireless services in the frequency band 694 MHz to 862 MHz. As a consequence, the limits of in-band immunity were specified for analogue and additionally for digital signals in this frequency range.
d) The substitution method of measurement (power method) was deleted.
e) EMC measurements below 30 MHz were deleted.
f) New Annex D “Measurements at other distances than the standard distance of 3 m”.
g) New Annex E “GPS based leakage detection system for cable networks”.
Committee |
TC 100
|
DevelopmentNote |
Stability Date: 2020. (06/2017)
|
DocumentType |
Standard
|
Pages |
25
|
PublisherName |
International Electrotechnical Committee
|
Status |
Current
|
Supersedes |
Standards | Relationship |
BS IEC 60728-12:2017 | Identical |
I.S. EN 60728-101:2017 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 101: SYSTEM PERFORMANCE OF FORWARD PATHS LOADED WITH DIGITAL CHANNELS ONLY |
03/311342 DC : DRAFT JULY 2003 | IEC 60728-10 ED.2.0 - CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 10: SYSTEM PERFORMANCE OF RETURN PATH (TA5) |
EN 60728-1-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 1-1: RF cabling for two way home networks |
EN 60728-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths |
EN 60728-10:2014 | Cable networks for television signals, sound signals and interactive services - Part 10: System performance for return paths |
15/30298002 DC : 0 | BS EN 60728-101 ED 1.0 - CABLE NETWORKS FOR TELEVISION SIGNALS; SOUND SIGNALS AND INTERACTIVE SERVICES - PART 101: SYSTEM PERFORMANCE OF FORWARD PATHS WITH ALL-DIGITAL CHANNELS LOAD (TA/5) |
BS EN 60728-1:2014 | Cable networks for television signals, sound signals and interactive services System performance of forward paths |
CEI EN 61935-3 : 2011 | TESTING OF BALANCED AND COAXIAL INFORMATION TECHNOLOGY CABLING - PART 3: INSTALLED CABLING AS SPECIFIED IN EN 50173-4 AND RELATED STANDARDS |
IEC 60728-101:2016 | Cable networks for television signals, sound signals and interactive services - Part 101: System performance of forward paths loaded with digital channels only |
IEC 60728-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths |
BS EN 60728-1-1:2014 | Cable networks for television signals, sound signals and interactive services RF cabling for two way home networks |
IEC 61935-3:2008 | Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards |
I.S. EN 60728-1-1:2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 1-1: RF CABLING FOR TWO WAY HOME NETWORKS |
BS EN 60728-10:2014 | Cable networks for television signals, sound signals and interactive services System performance for return paths |
CEI EN 60728-101 : 1ED 2017 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 101: SYSTEM PERFORMANCE OF FORWARD PATHS LOADED WITH DIGITAL CHANNELS ONLY |
IEC 60728-2:2018 | Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment |
IEC 60728-10:2014 | Cable networks for television signals, sound signals and interactive services - Part 10: System performance of return paths |
IEC 60728-1-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 1-1: RF cabling for two way home networks |
NF EN 61935-3 : 2010 | TESTING OF BALANCED AND COAXIAL INFORMATION TECHNOLOGY CABLING - PART 3: INSTALLED CABLING AS SPECIFIED IN EN 50173-4 AND RELATED STANDARDS |
BS EN 60728-101:2017 | Cable networks for television signals, sound signals and interactive services System performance of forward paths loaded with digital channels only |
BS EN 61935-3:2009 | Testing of balanced and coaxial information technology cabling Installed cabling as specified in EN 50173-4 and related standards |
EN 60728-101:2017/AC:2017-07 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 101: SYSTEM PERFORMANCE OF FORWARD PATHS LOADED WITH DIGITAL CHANNELS ONLY (IEC 60728-101:2016) |
I.S. EN 60728-10:2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 10: SYSTEM PERFORMANCE FOR RETURN PATHS |
I.S. EN 61935-3:2009 | TESTING OF BALANCED AND COAXIAL INFORMATION TECHNOLOGY CABLING - PART 3: INSTALLED CABLING AS SPECIFIED IN EN 50173-4 AND RELATED STANDARDS |
I.S. EN 60728-1:2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 1: SYSTEM PERFORMANCE OF FORWARD PATHS |
EN 61935-3:2009 | Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in EN 50173-4 and related standards |
CEI EN IEC 60728-101-1:2023 | Cable networks for television signals, sound signals and interactive services Part 101-1: RF cabling for two-way home networks with all-digital channels load |
CISPR 16-1-4:2010+AMD1:2012+AMD2:2017 CSV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements |
IEC 60966-2-6:2016 | Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors |
CISPR 16-1-1:2015 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus |
CISPR 32:2015 RLV | Electromagnetic compatibility of multimedia equipment - Emission requirements |
IEC 61169-24:2009 | Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 Ω cable networks (type F) |
IEC 60966-2-5:2016 | Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors |
IEC 60966-2-7:2015 | Radio frequency and coaxial cable asemblies - Part 2-7: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-47 connectors |
IEC 60966-2-4:2016 | Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors |
IEC 61169-2:2007 | Radio-frenquency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.