IEC 61040:1990
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Power and energy measuring detectors, instruments and equipment for laser radiation
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
31-08-2011
English - French
30-11-1990
Foreword
Clause
1 Scope and object
2 Terminology
2.1 Calibration
2.2 Calibration factor
2.3 Detector
2.4 Equipment (for measuring laser power or energy)
2.5 Error
2.6 Fall time constant
2.7 Indicator (for a laser detector)
2.8 Individual uncertainties
2.9 Instrument (for measuring laser power or energy)
2.10 Irradiance
2.11 Laser
2.12 Laser detector
2.13 Laser radiation
2.14 Measurement result
2.15 Optical spectral range
2.16 Radiant energy
2.17 Radiant exposure
2.18 Radiant power (radiant flux)
2.19 Range of application
2.20 Relative uncertainty
2.21 Response time constant
2.22 Responsivity
2.23 Root-sum-square uncertainty
2.24 Calibration spectral bandwidth
2.25 Spectral responsivity
2.26 Uncertainty of measurement
2.27 Waiting time
2.28 Zero drift
3 Requirements
3.1 Minimum requirements
3.2 Additional requirements for a detector, an
instrument or equipment with specification of an
accuracy class
3.3 Calibration
3.4 Overload
3.5 User's possibility of checking proper operation
4 Tests
4.1 Change of responsivity with time
4.2 Spatial change of responsivity (non-uniformity)
4.3 Change of responsivity during irradiation
4.4 Temperature dependence of responsivity
4.5 Dependence of responsivity on the angle of incidence
for non-polarized radiation
4.6 Dependence of responsibility on radiant power or
radiant energy (non-linearity)
4.7 Wavelength dependence of responsivity
4.8 Dependence of responsivity on the angle of incidence
for polarized radiation
4.9 Averaging with respect to time
4.10 Zero drift
4.11 Calibration
4.12 Overload
5 Operating instructions
5.1 Characteristic data
5.2 Limiting values
5.3 Special instructions for operation
5.4 Power range (energy range)
5.5 Adjustment
5.6 Damage
5.7 Hazards
5.8 Maintenance
5.9 Storage conditions
5.10 Limits of checking the proper operation
6 Designation and inscriptions
This standard lays down definitions and minimum requirements, as well as suitable test procedures, for the characteristics and manufacturing standards for detectors, instruments and equipment for the measurement of power and energy of laser radiation.
DevelopmentNote |
Also numbered as BS EN 61040. (12/2005)
|
DocumentType |
Standard
|
Pages |
31
|
PublisherName |
International Electrotechnical Committee
|
Status |
Withdrawn
|
Standards | Relationship |
JIS C 6181:1995 | Identical |
NBN EN 61040 : 1993 | Identical |
NEN 11040 : 1995 | Identical |
I.S. EN 61040:1993 | Identical |
PN EN 61040 : 1998 | Identical |
SN EN 61040 : 1992 | Identical |
VDE 0835 : 1993 | Identical |
DIN EN 61040 : 1993 | Identical |
UNE-EN 61040:1992 | Identical |
CEI EN 61040 : 1998 | Identical |
EN 61040:1992 | Identical |
PNE-EN 61040 | Identical |
12/30258455 DC : 0 | FPREN 60065:2011+FPRAA - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
12/30258880 DC : 0 | BS EN 60825-1 ED.3 - SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS |
PD ISO/TR 11146-3:2004 | Lasers and laser-related equipment. Test methods for laser beam widths, divergence angles and beam propagation ratios Intrinsic and geometrical laser beam classification, propagation and details of test methods |
01/714513 DC : DRAFT NOV 2001 | ISO/CD 11146-1 - LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM WIDTHS, DIVERGENCE ANGLE AND BEAM PROPAGATION FACTOR - PART 1: STIGMATIC AND SIMPLE ASTIGMATIC BEAMS |
NF EN ISO 11146-2 : 2005 | LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM WIDTHS, DIVERGENCE ANGLE AND BEAM PROPAGATION RATIOS - PART 2: GENERAL ASTIGMATIC BEAMS |
BS EN ISO 11670:2003 | Lasers and laser-related equipment. Test methods for laser beam parameters. Beam positional stability |
BS EN ISO 15367-2:2005 | Lasers and laser-related equipment. Test methods for determination of the shape of a laser beam wavefront Shack-Hartmann sensors |
DIN EN ISO 12005:2003-10 | Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization (ISO 12005:2003) |
ISO 13694:2015 | Optics and photonics Lasers and laser-related equipment Test methods for laser beam power (energy) density distribution |
PD IEC TR 60825-14:2004 | Safety of laser products A user\'s guide |
01/714514 DC : DRAFT NOV 2001 | ISO/CD 11146-2 - LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM WIDTHS, DIVERGENCE ANGLE AND BEAM PROPAGATION RATIO - PART 2: GENERAL ASTIGMATIC BEAMS |
I.S. EN 61315:2006 | CALIBRATION OF FIBRE-OPTIC POWER METERS |
04/30124932 DC : DRAFT NOV 2004 | ISO 11554 - OPTICS AND OPTICAL INSTRUMENTS - LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM POWER, ENERGY AND TEMPORAL CHARACTERISTICS |
I.S. EN ISO 13694:2015 | OPTICS AND OPTICAL INSTRUMENTS - LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM POWER (ENERGY) DENSITY DISTRIBUTION (ISO 13694:2015) |
ISO/TR 11146-3:2004 | Lasers and laser-related equipment Test methods for laser beam widths, divergence angles and beam propagation ratios Part 3: Intrinsic and geometrical laser beam classification, propagation and details of test methods |
I.S. EN ISO 11146-2:2005 | LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM WIDTHS, DIVERGENCE ANGLES AND BEAM PROPAGATION RATIOS - PART 2: GENERAL ASTIGMATIC BEAMS |
I.S. EN ISO 11554:2017 | OPTICS AND PHOTONICS - LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM POWER, ENERGY AND TEMPORAL CHARACTERISTICS (ISO 11554:2017) |
I.S. EN 61204-7:2006 | LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 7: SAFETY REQUIREMENTS |
DIN EN ISO 17526:2003-10 | OPTIC AND OPTICAL INSTRUMENTS - LASERS AND LASER-RELATED EQUIPMENT - LIFETIME OF LASERS |
ISO 17526:2003 | Optics and optical instruments Lasers and laser-related equipment Lifetime of lasers |
DIN EN ISO 13694:2016-08 | OPTICS AND PHOTONICS - LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM POWER (ENERGY) DENSITY DISTRIBUTION (ISO 13694:2015) |
12/30239877 DC : 0 | BS EN 60065 ED 8.0 - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
BS EN ISO 13694:2015 | Optics and photonics. Lasers and laser-related equipment. Test methods for laser beam power (energy) density distribution |
I.S. EN ISO 11146:1999 | LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM PARAMETERS - BEAM WIDTHS, DIVERGENCE ANGLE AND BEAM PROPAGATION FACTOR |
EN ISO 13694:2015 | Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2015) |
CEI EN 61315 : 2007 | CALIBRATION OF FIBRE-OPTIC POWER METERS |
BS EN ISO 11146-2:2005 | Lasers and laser-related equipment. Test methods for laser beam widths, divergence angles and beam propagation ratios General astigmatic beams |
BS EN ISO 15367-1:2003 | Lasers and laser-related equipment. Test methods for determination of the shape of a laser beam wavefront Terminology and fundamental aspects |
I.S. EN ISO 12005:2003 | LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM PARAMETERS - POLARIZATION |
03/312210 DC : DRAFT AUG 2003 | ISO 15367-2 - LASERS AND LASER RELATED EQUIPMENT - TEST METHODS FOR DETERMINATION OF THE SHAPE OF A LASER BEAM WAVEFRONT - PART 2: HARTMANN-SHACK SENSORS |
PD IEC/TR 60825-13:2011 | Safety of laser products Measurements for classification of laser products |
16/30327521 DC : 0 | BS EN ISO 11554 - LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM POWER, ENERGY AND TEMPORAL CHARACTERISTICS |
03/309903 DC : DRAFT JUNE 2003 | IEC 61315 ED.2.0 - CALIBRATION OF FIBRE-OPTIC POWER METERS |
17/30340372 DC : 0 | BS EN 62906-5-1 ED 1.0 - LASER DISPLAY DEVICES - PART 5-1: MEASUREMENT OF OPTICAL PERFORMANCE FOR LASER FRONT PROJECTION |
EN ISO 11146-1:2005 | Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams (ISO 11146-1:2005) |
ISO 11554:2017 | Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics |
NF EN ISO 11146-1 : 2005 | LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM WIDTHS, DIVERGENCE ANGLE AND BEAM PROPAGATION RATIOS - PART 1: STIGMATIC AND SIMPLE ASTIGMATIC BEAMS |
DIN EN ISO 15367-1:2004-02 | Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects (ISO 15367-1:2003); German version EN ISO 15367-1:2003 |
DIN EN ISO 15367-2:2005-06 | LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR DETERMINATION OF THE SHAPE OF A LASER BEAM WAVEFRONT - PART 2: SHACK-HARTMANN SENSORS |
ISO 15367-1:2003 | Lasers and laser-related equipment Test methods for determination of the shape of a laser beam wavefront Part 1: Terminology and fundamental aspects |
ISO 11146-2:2005 | Lasers and laser-related equipment Test methods for laser beam widths, divergence angles and beam propagation ratios Part 2: General astigmatic beams |
BS EN ISO 11146:2000 | Laser and laser-related equipment. Test methods for laser beam parameters. Beam width, divergence angle and beam |
ISO 15367-2:2005 | Lasers and laser-related equipment Test methods for determination of the shape of a laser beam wavefront Part 2: Shack-Hartmann sensors |
BS EN ISO 11146-1:2005 | Lasers and laser-related equipment. Test methods for laser beam widths, divergence angles and beam propagation ratios Stigmatic and simple astigmatic beams |
ISO 11670:2003 | Lasers and laser-related equipment — Test methods for laser beam parameters — Beam positional stability |
ISO 11146:1999 | Lasers and laser-related equipment Test methods for laser beam parameters Beam widths, divergence angle and beam propagation factor |
IEC 61315:2005 | Calibration of fibre-optic power meters |
ISO 11146-1:2005 | Lasers and laser-related equipment Test methods for laser beam widths, divergence angles and beam propagation ratios Part 1: Stigmatic and simple astigmatic beams |
BS EN ISO 17526:2003 | Optics and optical instruments. Lasers and laser-related equipment. Lifetime of lasers |
ISO 12005:2003 | Lasers and laser-related equipment Test methods for laser beam parameters Polarization |
BS EN 61204-7:2006 | Live working. Conductive clothing Safety requirements |
EN ISO 15367-1:2003 | Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects (ISO 15367-1:2003) |
EN ISO 11554:2017 | Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017) |
EN ISO 12005:2003 | Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization (ISO 12005:2003) |
EN ISO 15367-2:2005 | Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 2: Shack-Hartmann sensors (ISO 15367-2:2005) |
EN ISO 11146 : 1999 | LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM PARAMETERS - BEAM WIDTHS, DIVERGENCE ANGLE AND BEAM PROPAGATION FACTOR |
EN ISO 17526:2003 | Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers (ISO 17526:2003) |
I.S. EN ISO 11146-1:2005 | LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM WIDTHS, DIVERGENCE ANGLES AND BEAM PROPAGATION RATIOS - PART 1: STIGMATIC AND SIMPLE ASTIGMATIC BEAMS |
BS EN 61315:2006 | Calibration of fibre-optic power meters |
CEI 76-11 : 2011 | SAFETY OF LASER PRODUCTS - PART 14: A USER'S GUIDE |
IEC TR 60825-13:2011 | Safety of laser products - Part 13: Measurements for classification of laser products |
14/30284762 DC : 0 | BS EN ISO 13694 - OPTICS AND OPTICAL INSTRUMENTS - LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM POWER (ENERGY) DENSITY DISTRIBUTION |
EN ISO 11146-2:2005 | Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams (ISO 11146-2:2005) |
IEC TR 60825-14:2004 | Safety of laser products - Part 14: A user's guide |
BS EN ISO 12005:2003 | Lasers and laser-related equipment. Test methods for laser beam parameters. Polarization |
DIN EN ISO 11146-1:2005-04 | Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams (ISO 11146-1:2005) |
DIN EN ISO 11670:2003-10 | LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM PARAMETERS - BEAM POSITIONAL STABILITY |
EN 61315:2006 | Calibration of fibre-optic power meters |
DIN EN ISO 11146-2:2005-05 | Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams (ISO 11146-2:2005) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.