
IEC 61558-2-16:2009+AMD1:2013 CSV
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by

Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particularrequirements and tests for switch mode power supply units andtransformers for switch mode power supply units
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
13-07-2021
English - French
12-08-2013
FOREWORD
INTRODUCTION TO THE AMENDMENT
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 General notes on tests
6 Ratings
7 Classification
8 Marking and other information
9 Protection against electric shock
10 Change of input voltage setting
11 Output voltage and output current under load
12 No-load output voltage
13 Short circuit voltage
14 Heating
15 Short-circuit and overload protection
16 Mechanical strength
17 Protection against harmful ingress of dust,
solid objects and moisture
18 Insulation resistance, dielectric strength
and leakage current
19 Construction
20 Components
21 Internal wiring
22 Supply connection and other external flexible
cables or cords
23 Terminals for external conductors
24 Provisions for protective earthing
25 Screws and connections
26 Creepage distances, clearances and distances
through insulation
27 Resistance to heat, fire and tracking
28 Resistance to rusting
Annexes
Annex K (normative) - Insulated winding wires
Annex AA (informative) - Partial discharge (PD) test
Annex BB (normative) - Particular requirements
for associated transformers for use in switch
mode power supplies with internal frequencies > 500 Hz
Bibliography
IEC 61558-2-16:2009+A1:2013 deals with the safety of switch mode power supply units and transformers for switch mode power supply units. Transformers incorporating electronic circuits are also covered by this standard. It is based on the second edition (2005) of that standard. This first edition of IEC 61558-2-16 cancels and replaces IEC 61558-2-17, published in 1997. It constitutes a technical revision. This part has the status of a group safety publication in accordance with IEC Guide 104 (1997): The preparation of safety publications and the use of basic safety publications and group safety publications. This consolidated version consists of the first edition (2009) and its amendment 1 (2013). Therefore, no need to order amendment in addition to this publication.
This publication is to be read in conjunction with IEC 61558-1:2005.
Committee |
TC 96
|
DevelopmentNote |
Supersedes IEC 61558-2-17. (06/2009) Stability Date: 2020. (09/2017)
|
DocumentType |
Standard
|
Pages |
187
|
PublisherName |
International Electrotechnical Committee
|
Status |
Withdrawn
|
SupersededBy | |
Supersedes |
Standards | Relationship |
AS/NZS 61558.2.16:2010 | Identical |
NF EN 61558-2-16 : 2010 AMD 1 2014 | Identical |
NBN EN 61558-2-16 : 2010 AMD 1 2014 | Identical |
NEN EN IEC 61558-2-16 : 2010 AMD 1 2013 | Identical |
I.S. EN 61558-2-16:2009 | Identical |
PN EN 61558-2-16 : 2010 AMD 1 2014 | Identical |
SAC GB 19212-17 : 2013 | Identical |
VDE 0570-2-16 : 2014 | Identical |
DIN EN 61558-2-16 : 2014 | Identical |
UNE-EN 61558-2-16:2010 | Identical |
BS EN 61558-2-16 : 2009 | Identical |
EN 61558-2-16:2009/A1:2013 | Identical |
CEI EN 61558-2-6 : 2010 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-6: PARTICULAR REQUIREMENTS AND TESTS FOR SAFETY ISOLATING TRANSFORMERS AND POWER SUPPLY UNITS INCORPORATING SAFETY ISOLATING TRANSFORMERS |
I.S. EN 16232:2013 | CHILD USE AND CARE ARTICLES - INFANT SWINGS |
15/30259978 DC : 0 | BS EN 62477-2 - SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 2: POWER ELECTRONIC CONVERTERS FROM 1000 V A.C. OR 1500 V D.C. UP TO 36 KV A.C. OR 54 KV D.C. |
CEI EN 61558-2-26 : 2014 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-26: PARTICULAR REQUIREMENTS AND TESTS FOR TRANSFORMERS AND POWER SUPPLY UNITS FOR SAVING ENERGY AND OTHER PURPOSES |
BS EN 16232 : 2013 | CHILD USE AND CARE ARTICLES - INFANT SWINGS |
12/30258455 DC : 0 | FPREN 60065:2011+FPRAA - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
BS EN ISO 12696:2016 | Cathodic protection of steel in concrete |
NF EN 61347-1 : 2015 | LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS |
BS EN 61558-2-6:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers |
12/30257420 DC : 0 | BS EN 61851-23 ED 1.0 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 23: D.C. ELECTRIC VEHICLE CHARGING STATION |
BS EN 61558-2-14:2013 | Safety of transformers, reactors, power supply units and combination thereof Particular requirements and tests for variable transformers and power supply units incorporating variable transformers |
BS EN 61558-2-13:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V Particular requirements and tests for auto transformers and power supply units incorporating auto transformers |
CEI EN 61558-2-9 : 2012 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-9: PARTICULAR REQUIREMENTS AND TESTS FOR TRANSFORMERS AND POWER SUPPLY UNITS FOR CLASS 3 HANDLAMPS FOR TUNGSTEN FILAMENT LAMPS |
PREN ISO 12696 : DRAFT 2009 | CATHODIC PROTECTION OF STEEL IN CONCRETE |
BS EN 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
I.S. EN 61347-2-2:2012 | LAMP CONTROLGEAR - PART 2-2: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC STEP-DOWN CONVERTORS FOR FILAMENT LAMPS (IEC 61347-2-2:2011 (EQV)) |
IEC 62115:2017 | Electric toys - Safety |
I.S. EN 61347-2-7:2012 | LAMP CONTROLGEAR - PART 2-7: PARTICULAR REQUIREMENTS FOR BATTERY SUPPLIED ELECTRONIC CONTROLGEAR FOR EMERGENCY LIGHTING (SELF-CONTAINED) (IEC 61347-2-7:2011 (EQV)) |
CEI EN 61347-2-2 : 2012 | LAMP CONTROLGEAR - PART 2-2: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC STEPDOWN CONVERTORS FOR FILAMENT LAMPS |
I.S. EN 61558-2-23:2010 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-23: PARTICULAR REQUIREMENTS AND TESTS FOR TRANSFORMERS AND POWER SUPPLY UNITS FOR CONSTRUCTION SITES |
I.S. EN 61347-1:2015 | LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS |
UNE-EN 61558-2-8:2011 | Safety of transformers, reactors, power supply units and combinations thereof -- Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes |
I.S. EN 62841-1:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
17/30360051 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
BS EN 61347-2-7:2012+A1:2019 | Lamp controlgear Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) |
UNI EN 16232 : 2013 | CHILD USE AND CARE ARTICLES - INFANT SWINGS |
IEC 61851-1:2017 | Electric vehicle conductive charging system - Part 1: General requirements |
CSA C22.2 No. 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
BS EN 61347-1:2015 | Lamp controlgear General and safety requirements |
IEC 61558-2-23:2010 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites |
BS EN 62477-1 : 2012 | SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012) |
EN 61347-1:2015 | Lamp controlgear - Part 1: General and safety requirements |
EN 62052-31:2016 | Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests |
EN 61558-2-4:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers |
EN 61558-2-20:2011 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-20: Particular requirements and tests for small reactors |
EN 61347-2-13:2014/A1:2017 | LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES |
EN 61558-2-8:2010 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes |
EN 60730-1:2016 | Automatic electrical controls - Part 1: General requirements |
EN 61558-2-5:2010 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-5: Particular requirements and tests for transformer for shavers, power supply units for shavers and shaver supply units |
EN 61558-2-13:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers |
EN 61347-2-2:2012 | Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
EN 61558-2-26:2013 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-26: Particular requirements and tests for transformers and power supply units for saving energy and other purposes |
EN 61558-2-12:2011 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage |
EN ISO 12696:2016 | Cathodic protection of steel in concrete (ISO 12696:2016) |
EN 61347-2-7:2012 | Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) |
EN 61558-2-10:2014 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-10: Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V |
CEI EN 62841-1 : 2016 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
15/30324466 DC : 0 | BS EN 16716 - MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
I.S. EN 13611:2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
BS EN 61558-2-23:2001 | Safety of power transformers, power supply units and similar Particular requirements for transformers for construction sites |
CEI EN 61558-2-23 : 2012 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-23: PARTICULAR REQUIREMENTS AND TESTS FOR TRANSFORMERS AND POWER SUPPLY UNITS FOR CONSTRUCTION SITES |
BS EN 61558-2-10:2014 | Safety of transformers, reactors, power supply units and combinations thereof Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V |
BS EN 16716:2017 | Mountaineering equipment. Avalanche airbag systems. Safety requirements and test methods |
UNE-EN 16716:2017 | Mountaineering equipment - Avalanche Airbag systems - Safety requirements and test methods |
I.S. EN 62477-1:2012 | SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL |
UNE-EN 61558-2-26:2014 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-26: Particular requirements and tests for transformers and power supply units for saving energy and other purposes |
BS EN 61347-2-7:2012 | Lamp controlgear Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) |
CEI EN 61558-2-5 : 2011 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-5: PARTICULAR REQUIREMENTS AND TESTS FOR TRANSFORMER FOR SHAVERS, POWER SUPPLY UNITS FOR SHAVERS AND SHAVER SUPPLY UNITS |
I.S. EN 62115:2006 | ELECTRIC TOYS - SAFETY(IEC 62115:2003 (MOD) + A1:2004 (EQV)) |
I.S. EN 61558-2-6:2009 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-6: PARTICULAR REQUIREMENTS AND TESTS FOR SAFETY ISOLATING TRANSFORMERS AND POWER SUPPLY UNITS INCORPORATING SAFETY ISOLATING TRANSFORMERS |
IEC 60204-33:2009 | Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment |
IEC 61558-2-13:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers |
11/30252196 DC : 0 | BS EN 61347-1:2008 + A2 - LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS |
UL 60730-1:5ED 2016-08-03 | Automatic Electrical Controls - Part 1: General Requirements |
EN 60065:2014/AC:2017-01 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016) |
DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
CEI EN 61558-2-10 : 2014 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-10: PARTICULAR REQUIREMENTS AND TESTS FOR SEPARATING TRANSFORMERS WITH HIGH INSULATION LEVEL AND SEPARATING TRANSFORMERS WITH OUTPUT VOLTAGES EXCEEDING 1000 V |
09/30185957 DC : 0 | BS EN ISO 12696 - CATHODIC PROTECTION OF STEEL IN CONCRETE |
BS EN 61558-2-20:2011 | Safety of transformers, reactors, power supply units and combinations thereof Particular requirements and tests for small reactors |
17/30347375 DC : 0 | BS EN 62368-1 ED 3.0 - AUDIO/VIDEO; INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
CEI EN 61558-2-8 : 2012 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-8: PARTICULAR REQUIREMENTS AND TESTS FOR TRANSFORMERS AND POWER SUPPLY UNITS FOR BELLS AND CHIMES |
ISO 20126:2012 | Dentistry Manual toothbrushes General requirements and test methods |
BS EN 61558-2-12:2011 | Safety of transformers, reactors, power supply units and combinations thereof Particular requirements and tests for constant voltage transformers and power supply units for constant voltage |
I.S. EN 61558-2-14:2013 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATION THEREOF - PART 2-14: PARTICULAR REQUIREMENTS AND TESTS FOR VARIABLE TRANSFORMERS AND POWER SUPPLY UNITS INCORPORATING VARIABLE TRANSFORMERS (IEC 61558-2-14:2012 (EQV)) |
BS EN 61347-2-2:2012 | Lamp controlgear Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
CEI EN 61558-2-12 : 2012 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-12: PARTICULAR REQUIREMENTS AND TESTS FOR CONSTANT VOLTAGE TRANSFORMERS AND POWER SUPPLY UNITS FOR CONSTANT VOLTAGE |
CEI EN 61558-2-20 : 2012 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-20: PARTICULAR REQUIREMENTS AND TESTS FOR SMALL REACTORS |
UNE-EN 61558-2-12:2011 | Safety of transformers, reactors, power supply units and combinations thereof -- Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage |
I.S. EN 61558-2-5:2010 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-5: PARTICULAR REQUIREMENTS AND TESTS FOR TRANSFORMER FOR SHAVERS, POWER SUPPLY UNITS FOR SHAVERS AND SHAVER SUPPLY UNITS |
EN 16232:2013 | Child use and care articles - Infant swings |
CEI EN 62368-1 : 2016 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
I.S. EN 61558-2-12:2011 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-12: PARTICULAR REQUIREMENTS AND TESTS FOR CONSTANT VOLTAGE TRANSFORMERS AND POWER SUPPLY UNITS FOR CONSTANT VOLTAGE |
BS EN ISO 20126 : 2012 | DENTISTRY - MANUAL TOOTHBRUSHES - GENERAL REQUIREMENTS AND TEST METHODS (ISO 20126:2012) |
I.S. EN 61558-2-13:2009 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-13: PARTICULAR REQUIREMENTS AND TESTS FOR AUTO TRANSFORMERS AND POWER SUPPLY UNITS INCORPORATING AUTO TRANSFORMERS |
BS EN 60065 : 2014 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014, MODIFIED) |
DIN EN 16232:2013-12 | CHILD USE AND CARE ARTICLES - INFANT SWINGS |
I.S. EN 61558-2-9:2011 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-9: PARTICULAR REQUIREMENTS AND TESTS FOR TRANSFORMERS AND POWER SUPPLY UNITS FOR CLASS 3 HANDLAMPS FOR TUNGSTEN FILAMENT LAMPS |
UNE-EN 61558-2-9:2012 | Safety of transformers, reactors, power supply units and combinations thereof -- Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps |
UNE-EN 61558-2-10:2014 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-10: Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V |
I.S. EN 61558-2-20:2011 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-20: PARTICULAR REQUIREMENTS AND TESTS FOR SMALL REACTORS |
IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
IEC 62368-1:2014 | Audio/video, information and communication technology equipment - Part 1: Safety requirements |
I.S. EN 61558-2-4:2009 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-4: PARTICULAR REQUIREMENTS AND TESTS FOR ISOLATING TRANSFORMERS AND POWER SUPPLY UNITS INCORPORATING ISOLATING TRANSFORMERS |
UNE-EN 61347-1:2016 | Lamp controlgear - Part 1: General and safety requirements |
UNE-EN 62841-1:2016 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements |
IEC 61558-2-14:2012 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers |
IEC 61347-2-2:2011 | Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
UNE-EN 61347-2-13:2015 | Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules |
UNE-EN 60730-1:2013 | Automatic electrical controls for household and similar use - Part 1: General requirements |
IEC 61558-2-6:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers |
EN 61558-2-23:2010 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites |
UNE-EN ISO 12696:2017 | Cathodic protection of steel in concrete (ISO 12696:2016) |
NF EN 13611 : 2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
CEI EN 61558-2-4 : 2010 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-4: PARTICULAR REQUIREMENTS AND TESTS FOR ISOLATING TRANSFORMERS AND POWER SUPPLY UNITS INCORPORATING ISOLATING TRANSFORMERS |
12/30239867 DC : 0 | BS EN 62368-1 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
11/30245183 DC : 0 | BS EN 62115 PRAB - ELECTRIC TOYS - SAFETY |
UNE-EN 61558-2-5:2011 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-5: Particular requirements and tests for shaver transformers, power supply units incorporating a shaver transformer and shaver supply units |
UNE-EN 60065:2015 | Audio, video and similar electronic apparatus - Safety requirements |
CEI EN 61347-1 : 2016 | LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS |
CEI EN 61558-2-13 : 2010 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-13: PARTICULAR REQUIREMENTS AND TESTS FOR AUTO TRANSFORMERS AND POWER SUPPLY UNITS INCORPORATING AUTO TRANSFORMERS |
UNE-EN 61558-2-14:2013 | Safety of transformers, reactors, power supply units and combination thereof - Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers |
BS EN 61558-2-8:2010 | Safety of transformers, reactors, power supply units and combinations thereof Particular requirements and tests for transformers and power supply units for bells and chimes |
12/30258453 DC : 0 | BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
UNE-EN 61347-2-7:2012 | Lamp controlgear -- Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) |
I.S. EN 60335-2-76:2005 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-76: PARTICULAR REQUIREMENTS FOR ELECTRIC FENCE ENERGIZERS |
I.S. EN 61558-2-10:2014 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-10: PARTICULAR REQUIREMENTS AND TESTS FOR SEPARATING TRANSFORMERS WITH HIGH INSULATION LEVEL AND SEPARATING TRANSFORMERS WITH OUTPUT VOLTAGES EXCEEDING 1000 V |
I.S. EN 60065:2014 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
I.S. EN 62368-1:2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
I.S. EN 61558-2-26:2013 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-26: PARTICULAR REQUIREMENTS AND TESTS FOR TRANSFORMERS AND POWER SUPPLY UNITS FOR SAVING ENERGY AND OTHER PURPOSES (IEC 61558-2-26:2013 (EQV)) |
EN 62368-1:2014/AC:2017-03 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
PREN 13611 : DRAFT 2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
I.S. EN 60730-1:2016 | AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS |
IEC 60335-2-76:2002+AMD1:2006+AMD2:2013 CSV | Household and similar electrical appliances - Safety - Part 2-76:Particular requirements for electric fence energizers |
12/30272980 DC : 0 | BS EN 6XXXX-1 - ELECTRIC MOTOR-OPERATED HAND-HELD, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
IEC 62052-31:2015 | Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests |
BS EN 61347-2-13 : 2014 | LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES (IEC 61347-2-13:2014) |
BS EN 60730-1:2011 | Automatic electrical controls for household and similar use General requirements |
IEC 61558-2-4:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers |
IEC 61347-2-13:2014+AMD1:2016 CSV | Lamp controlgear - Part 2-13: Particular requirements for d.c. ora.c. supplied electronic controlgear for LED modules |
IEC 62477-1:2012+AMD1:2016 CSV | Safety requirements for power electronic converter systems and equipment - Part 1: General |
CAN/CSA-C22.2 No. 62841-1 : 2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
IEC 61558-2-9:2010 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps |
ISO 12696:2016 | Cathodic protection of steel in concrete |
IEC 61558-2-20:2010 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-20: Particular requirements and tests for small reactors |
IEC 61347-2-7:2011+AMD1:2017 CSV | Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) |
11/30233799 DC : 0 | BS EN 60730-1 ED5 - AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 1: GENERAL REQUIREMENTS |
UNE-EN 62115:2006 | Electric toys - Safety (IEC 62115:2003 + A1:2004, modified) |
BS EN 60204-33:2011 | Safety of machinery. Electrical equipment of machines Requirements for semiconductor fabrication equipment |
15/30269927 DC : 0 | BS EN 61851-1 ED 3.0 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM PART 1: GENERAL REQUIREMENTS |
IEC 61558-2-12:2011 | Safety of transformers, reactors, power supply units and combination thereof - Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage |
IEC 61558-2-8:2010 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes |
IEC 61558-2-26:2013 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-26: Particular requirements and tests for transformers and power supply units all for saving energy and other purposes |
IEC 61347-1:2015 RLV | Lamp controlgear - Part 1: General and safety requirements |
BS EN 62841-1:2015 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety General requirements |
EN 16716:2017 | Mountaineering equipment - Avalanche airbag systems - Safety requirements and test methods |
DIN EN 16716:2015-08 (Draft) | MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
UNE-EN 61347-2-2:2012 | Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
BS EN 61558-2-5:2010 | Safety of transformers, reactors, power supply units and combinations thereof Particular requirements and tests for transformer for shavers, power supply units for shavers and shaver supply units |
BS EN 62115 : 2005 | ELECTRIC TOYS - SAFETY |
CEI EN 61347-2-7 : 2012 | LAMP CONTROLGEAR - PART 2-7: PARTICULAR REQUIREMENTS FOR BATTERY SUPPLIED ELECTRONIC CONTROLGEAR FOR EMERGENCY LIGHTING (SELF-CONTAINED) |
BS EN 61558-2-4:2009 | Safety of transformers, reactors,power supply units and similar products for supply voltages up to 1100 V Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers |
BS EN 61558-2-26:2013 | Safety of transformers, reactors, power supply units and combinations thereof Particular requirements and tests for transformers and power supply units for saving energy and other purposes |
BS EN 61558-2-9:2011 | Safety of transformers, reactors, power supply units and combinations thereof Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps |
DIN EN ISO 12696:2016-07 (Draft) | CATHODIC PROTECTION OF STEEL IN CONCRETE (ISO 12696:2016) |
CSA C22.2 No. 60065 : 2016 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
UNE-EN 61558-2-20:2012 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V -- Part 2-20: Particular requirements and tests for small reactors |
I.S. EN 61558-2-8:2010 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-8: PARTICULAR REQUIREMENTS AND TESTS FOR TRANSFORMERS AND POWER SUPPLY UNITS FOR BELLS AND CHIMES |
I.S. EN 16716:2017 | MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
BS EN 60335-2-76 : 2005 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-76: PARTICULAR REQUIREMENTS FOR ELECTRIC FENCE ENERGIZERS |
I.S. EN 62052-31:2016 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS AND TESTS |
I.S. EN ISO 12696:2016 | CATHODIC PROTECTION OF STEEL IN CONCRETE (ISO 12696:2016) |
BS EN 13611:2015 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
I.S. EN 61347-2-13:2014 | LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES |
UNE-EN 13611:2016 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
I.S. EN 60204-33:2011 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT |
EN 62477-1:2012/A1:2017 | SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012/A1:2016) |
07/30091745 DC : 0 | BS IEC 62368 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - SAFETY - REQUIREMENTS |
IEC 61558-2-5:2010 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-5: Particular requirements and test for transformer for shavers, power supply units for shavers and shaver supply units |
IEC 61558-2-10:2014 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-10: Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V |
DIN EN 16716:2017-05 | MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
EN 61558-2-6:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers |
I.S. EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
EN 62841-1:2015/AC:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
EN 60335-2-76:2005/A2:2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-76: PARTICULAR REQUIREMENTS FOR ELECTRIC FENCE ENERGIZERS (IEC 60335-2-76:2002/A2:2013, MODIFIED) |
EN 61558-2-9:2011 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps |
EN 62115:2005/A12:2015 | ELECTRIC TOYS - SAFETY (IEC 62115:2003 + A1:2004, MODIFIED) |
EN 60204-33:2011 | Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment |
EN 61558-2-14:2013 | Safety of transformers, reactors, power supply units and combination thereof - Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers |
IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
IEC 61558-2-13:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers |
IEC 61558-2-1:2007 | Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications |
IEC 60664-4:2005 | Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress |
IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
IEC 61558-2-4:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers |
IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
IEC 61558-2-6:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers |
IEC 60317-56:2017 | Specifications for particular types of winding wires - Part 56: Solderable fully insulated (FIW) zero-defect polyurethane enamelled round copper wire, class 180 |
IEC 60851-5:2008+AMD1:2011 CSV | Winding wires - Test methods - Part 5: Electrical properties |
IEC 61558-1:2017 | Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests |
IEC 60851-3:2009+AMD1:2013 CSV | Winding wires - Test methods - Part 3: Mechanical properties |
IEC 60317-0-7:2017 | Specifications for particular types of winding wires - Part 0-7: General requirements - Fully insulated (FIW) zero-defect enamelled round copper wire |
IEC 60317-43:1997+AMD1:2010 CSV | Specifications for particular types of winding wires - Part 43: Aromatic polyimide type wrapped round copper wire, class 240 |
IEC 61204-7:2016 EXV | LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS |
IEC 61010-1:2010+AMD1:2016 CSV | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
AS/NZS 61347.2.2:2020 | Lamp controlgear Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps (IEC 61347-2-2:2011, MOD) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.