IEC 61754-7:2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7: Type MPO connector family
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
13-12-2017
English, English - French
27-03-2008
FOREWORD
1 Scope
2 Description
3 Interfaces
IEC 61754-7:2008 defines the standard interface dimensions for type MPO family of connectors. This third edition cancels and replaces the second edition published in 2004. This third edition constitutes a technical revision. Specific technical changes involve the addition of an aligned key adaptor interface definition to address all existing MPO applications. Keywords: standard interface dimensions for type MPO family of connectors
Committee |
TC 86/SC 86B
|
DevelopmentNote |
A Bilingual edition has been published on 06/03/2014. (03/2014) Stability Date: 2020. (09/2017)
|
DocumentType |
Standard
|
Pages |
28
|
PublisherName |
International Electrotechnical Committee
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
NEN EN IEC 61754-7 : 2008 | Identical |
EN 61754-7:2008 | Identical |
NF EN 61754-7 : 2014 | Identical |
DIN EN 61754-7:2008-12 | Identical |
CEI EN 61754-7 : 2008 | Identical |
NEN IEC 61754-7 : 99 AMD 2 2000 | Identical |
UNE-EN 61754-7:2008 | Identical |
PNE-prEN 61754-7 | Identical |
BS EN 61754-7:2008 | Identical |
PN EN 61754-7 : 2008 | Identical |
I.S. EN 61754-7:2008 | Identical |
UNE-EN 50173-5:2009 | Information technology - Generic cabling systems - Part 5: Data centres |
11/30249621 DC : 0 | BS EN 61300-3-49 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-49: MEASUREMENT - GUIDE PIN RETENTION FORCE FOR RECTANGLE FERRULE MULTI-FIBRE CONNECTORS |
CEI EN 61300-3-49 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-49: EXAMINATIONS AND MEASUREMENTS - GUIDE PIN RETENTION FORCE FOR RECTANGULAR FERRULE MULTI-FIBRE CONNECTORS |
ANSI INCITS 338 : 2003 | HIGH-PERFORMANCE PARALLEL INTERFACE - 6400 MBIT/S OPTICAL SPECIFICATION (HIPPI-6400-OPT) |
10/30228173 DC : 0 | BS EN 61755-3-31 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 3-31: OPTICAL INTERFACE, 8 DEGREES ANGLED PC, PLOYHENYLENE SULPHIDE RECTANGULAR FERRULE, SINGLE MODE FIBRES |
NF EN 50377-15-1 : 2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH 12-FIBRE PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE |
DD IEC PAS 61755-3-32 : DRAFT DEC 2007 | FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 3-32: OPTICAL INTERFACE - 8 DEGREES ANGLED-PC END-FACE THERMOSET RECTANGULAR FERRULE, SINGLE MODE FIBRES |
I.S. EN 61755-3-32:2016 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTOR OPTICAL INTERFACES - PART 3-32: CONNECTOR PARAMETERS OF NON-DISPERSION SHIFTED SINGLE MODE PHYSICALLY CONTACTING FIBRES - ANGLED THERMOSET EPOXY RECTANGULAR FERRULES |
SMPTE ST 2036-4 : 2015 | ULTRA HIGH DEFINITION TELEVISION - MULTI-LINK 10 GB/S SIGNAL/DATA INTERFACE USING 12-BIT WIDTH CONTAINER |
EN 61755-3-32:2016 | Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-32: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled thermoset epoxy rectangular ferrules |
EN 61300-3-48:2013 | Fibre optic interconnect devices and passive components - Basic test and measurement procedures - Part 3-48: Examinations and measurements - Spring compression force of the coupling sleeve for rectangular ferrule multi-fibre connectors |
EN 50377-15-1:2011 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 15-1: Type MPO with 12-fibre PPS ferrules terminated on IEC 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre |
11/30249602 DC : 0 | BS EN 61300-3-48 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-48: MEASUREMENT - SPRING COMPRESSION FORCE OF THE COUPLING SLEEVE FOR RECTANGULAR FERRULE MULTI-FIBRE CONNECTORS |
CEI EN 61300-3-52 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-52: EXAMINATIONS AND MEASUREMENTS - GUIDE HOLE AND ALIGNMENT PIN DEFORMATION CONSTANT, CD FOR 8 DEGREE ANGLED PC RECTANGULAR FERRULE, SINGLE MODE FIBRES |
17/30347865 DC : 0 | BS EN 50411-3-4 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-4: FIBRE MANAGEMENT SYSTEMS, WALL BOX FOR SPLICE TO PATCHCORD CONNECTIONS, FOR CATEGORY C AND A |
08/30185105 DC : DRAFT JULY 2008 | BS EN 50377-15-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE |
IEC PAS 61755-3-32:2007 | Fibre optic connector optical interfaces - Part 3-32: Optical interface - 8 degrees angled-PC end-face thermoset rectangular ferrule, single mode fibres |
EN 50173-5 : 2007 AMD 2 2012 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 5: DATA CENTRES |
CEI EN 61300-3-48 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-48: MEASUREMENT: SPRING COMPRESSION FORCE OF THE COUPLING SLEEVE FOR RECTANGULAR FERRULE MULTI-FIBRE CONNECTORS |
IEC 61300-3-52:2014 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-52: Examinations and measurements - Guide hole and alignment pin deformation constant, C<sub>D</sub> for 8 degree angled PC rectangular ferrule, single mode fibres |
CSA ISO/IEC 14165-116 : 2006 | INFORMATION TECHNOLOGY - FIBRE CHANNEL - PART 116: 10 GIGABIT FIBRE CHANNEL (10GFC) |
CSA ISO/IEC 14165-116 : 2006 : INC : AMD 1 : 2010 | INFORMATION TECHNOLOGY - FIBRE CHANNEL - PART 116: 10 GIGABIT FIBRE CHANNEL (10GFC) |
CSA ISO/IEC 14165-116 : 2006 : INC : AMD 1 : 2010 : R2016 | INFORMATION TECHNOLOGY - FIBRE CHANNEL - PART 116: 10 GIGABIT FIBRE CHANNEL (10GFC) |
NF EN 50173-5 : 2010 AMD 2 2013 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 5: DATA CENTERS |
NF EN 61755-3-31 : 2015 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTOR OPTICAL INTERFACES - PART 3-31: CONNECTOR PARAMETERS OF NON-DISPERSION SHIFTED SINGLE MODE PHYSICALLY CONTACTING FIBRES - ANGLED POLYPHENYLENE SULPHIDE RECTANGULAR FERRULES |
BS EN 61300-3-49:2013 | Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Guide pin retention force for rectangular ferrule multi-fibre connectors |
BS EN 61300-3-52:2014 | Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Guide hole and alignment pin deformation constant, CD for 8 degree angled PC rectangular ferrule, single mode fibres |
BS EN 61755-3-31:2015 | Fibre optic interconnecting devices and passive components. Connector optical interfaces Connector parameters of non-dispersion shifted single mode physically contacting fibres. Angled polyphenylene sulphide rectangular ferrules |
CEI EN 50377-15-1 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH 12-FIBRE PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE |
I.S. EN 50173-5:2007 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 5: DATA CENTRES |
I.S. EN 61300-3-52:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-52: EXAMINATIONS AND MEASUREMENTS - GUIDE HOLE AND ALIGNMENT PIN DEFORMATION CONSTANT, CD FOR 8 DEGREE ANGLED PC RECTANGULAR FERRULE, SINGLE MODE FIBRES |
I.S. EN 61300-3-48:2013 | FIBRE OPTIC INTERCONNECT DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-48: EXAMINATIONS AND MEASUREMENTS - SPRING COMPRESSION FORCE OF THE COUPLING SLEEVE FOR RECTANGULAR FERRULE MULTI-FIBRE CONNECTORS (IEC 61300-3-48:2013 (EQV)) |
IEEE 802.3-2012 | IEEE Standard for Ethernet |
IEC 61300-3-49:2013 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-49: Examinations and measurements - Guide pin retention force for rectangular ferrule multi-fibre connectors |
IEC 61755-3-31:2015 | Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-31: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled polyphenylene sulphide rectangular ferrules |
IEC 61300-3-48:2013 | Fibre optic interconnect devices and passive components - Basic test and measurement procedures - Part 3-48: Examinations and measurements - Spring compression force of the coupling sleeve for rectangular ferrule multi-fibre connectors |
EN 61300-3-49:2013 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-49: Examinations and measurements - Guide pin retention force for rectangular ferrule multi-fibre connectors |
I.S. EN 61300-3-49:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-49: EXAMINATIONS AND MEASUREMENTS - GUIDE PIN RETENTION FORCE FOR RECTANGULAR FERRULE MULTI-FIBRE CONNECTORS (IEC 61300-3-49:2013 (EQV)) |
CEI EN 61755-3-31 : 2016 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTOR OPTICAL INTERFACES - PART 3-31: CONNECTOR PARAMETERS OF NON-DISPERSION SHIFTED SINGLE MODE PHYSICALLY CONTACTING FIBRES - ANGLED POLYPHENYLENE SULPHIDE RECTANGULAR FERRULES |
BS EN 50173-5 : 2007 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 5: DATA CENTRES |
BS EN 50377-15-1:2011 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MPO with 12-fibre PPS ferrules terminated on IEC 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre |
IEC PAS 61755-3-31:2007 | Fibre optic connector optical interfaces - Part 3-31: Optical interface - 8 degrees angled PC end-face PPS rectangular ferrule, single mode fibre |
03/316188 DC : DRAFT SEP 2003 | IEC 62148-13 ED 1.0 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 13: 12-CHANNEL PLUGGABLE, PARALLEL TRANSMITTER AND RECEIVER MODULES WITH MPO OPTICAL CONNECTOR |
NF EN 61755-3-32 : 2016 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTOR OPTICAL INTERFACES - PART 3-32: CONNECTOR PARAMETERS OF NON-DISPERSION SHIFTED SINGLE MODE PHYSICALLY CONTACTING FIBRES - ANGLED THERMOSET EPOXY RECTANGULAR FERRULES |
BS EN 61300-3-48:2013 | Fibre optic interconnect devices and passive components. Basic test and measurement procedures Examinations and measurements. Spring compression force of the coupling sleeve for rectangular ferrule multi-fibre connectors |
12/30263909 DC : 0 | BS EN 61300-3-52 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-52: MEASUREMENT - GUIDE HOLE AND ALIGNMENT PIN DEFORMATION CONSTANT, CD FOR 8 DEGREE ANGLED PC RECTANGLE FERRULE, SINGLE MODE FIBERS |
I.S. EN 61755-3-31:2015 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTOR OPTICAL INTERFACES - PART 3-31: CONNECTOR PARAMETERS OF NON-DISPERSION SHIFTED SINGLE MODE PHYSICALLY CONTACTING FIBRES - ANGLED POLYPHENYLENE SULPHIDE RECTANGULAR FERRULES |
I.S. EN 50377-15-1:2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH 12-FIBRE PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE |
ISO/IEC/IEEE 8802-3:2017 | Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 3: Standard for Ethernet |
ISO/IEC 14165-116:2005 | Information technology Fibre Channel Part 116: 10 Gigabit (10GFC) |
IEC 61755-3-32:2015 | Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-32: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled thermoset epoxy rectangular ferrules |
EN 61300-3-52:2014 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-52: Examinations and measurements - Guide hole and alignment pin deformation constant, CD for 8 degree angled PC rectangular ferrule, single mode fibres |
EN 61755-3-31:2015 | Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-31: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled polyphenylene sulphide rectangular ferrules |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.