IEC 61788-6:2011
Current
The latest, up-to-date edition.
Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English - French
11-07-2011
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Apparatus
6 Specimen preparation
7 Testing conditions
8 Calculation of results
9 Uncertainty
10 Test report
Annex A (informative) - Additional information
relating to Clauses 1 to 10
Annex B (informative) - Uncertainty considerations
Annex C (informative) - Specific examples related
to mechanical tests
Bibliography
IEC 61788-6:2011 covers a test method detailing the tensile test procedures to be carried out on Cu/Nb-Ti superconductive composite wires at room temperature. This test is used to measure modulus of elasticity, 0,2 % proof strength of the composite due to yielding of the copper component, and tensile strength. The value for percentage elongation after fracture and the second type of 0,2 % proof strength due to yielding of the Nb-Ti component serves only as a reference. The sample covered by this test procedure has a round or rectangular cross-section with an area of 0,15 mm2 to 2 mm2 and a copper to superconductor volume ratio of 1,0 to 8,0 and without the insulating coating. This third edition cancels and replaces the second edition published in 2008. It constitutes a technical revision which adds a new Annex C including specific examples of uncertainty estimation related to mechanical tests.
| Committee |
TC 90
|
| DevelopmentNote |
Stability Date: 2018. (10/2012)
|
| DocumentType |
Standard
|
| Pages |
66
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN 61788-6 : 2011 | Identical |
| NEN EN IEC 61788-6 : 2011 | Identical |
| I.S. EN 61788-6:2011 | Identical |
| PN EN 61788-6 : 2011 | Identical |
| SAC GB/T 31527 : 2015 | Identical |
| VDE 0390-6 : 2012 | Identical |
| DIN EN 61788-6 : 2012 | Identical |
| CEI EN 61788-6 : 2012 | Identical |
| EN 61788-6:2011 | Identical |
| UNE-EN 61788-6:2002 | Identical |
| PNE-FprEN 61788-6 | Identical |
| UNE-EN 61788-6:2011 | Identical |
| BS EN 61788-6:2011 | Identical |
| IEC 61788-21:2015 | Superconductivity - Part 21: Superconducting wires - Test methods for practical superconducting wires - General characteristics and guidance |
| EN 61788-18:2013 | Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors |
| CEI EN 61788-18 : 2014 | SUPERCONDUCTIVITY - PART 18: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF AG- AND/OR AG ALLOY-SHEATHED BI-2223 AND BI-2212 COMPOSITE SUPERCONDUCTORS |
| BS EN 61788-21:2015 | Superconductivity Superconducting wires. Test methods for practical superconducting wires. General characteristics and guidance |
| BS EN 61788-18:2013 | Superconductivity Mechanical properties measurement. Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors |
| I.S. EN 61788-18:2013 | SUPERCONDUCTIVITY - PART 18: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF AG- AND/OR AG ALLOY-SHEATHED BI-2223 AND BI-2212 COMPOSITE SUPERCONDUCTORS |
| IEC TR 61788-20:2014 | Superconductivity - Part 20: Superconducting wires - Categories of practical superconducting wires - General characteristics and guidance |
| IEC 61788-18:2013 | Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors |
| PD IEC/TR 61788-20:2014 | Superconductivity Superconducting wires. Categories of practical superconducting wires. General characteristics and guidance |
| I.S. EN 61788-21:2015 | SUPERCONDUCTIVITY - PART 21: SUPERCONDUCTING WIRES - TEST METHODS FOR PRACTICAL SUPERCONDUCTING WIRES - GENERAL CHARACTERISTICS AND GUIDANCE |
| EN 61788-21:2015 | Superconductivity - Part 21: Superconducting wires - Test methods for practical superconducting wires - General characteristics and guidance |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| IEC 60050-815:2015 | International Electrotechnical Vocabulary (IEV) - Part 815: Superconductivity |
| ISO 9513:2012 | Metallic materials — Calibration of extensometer systems used in uniaxial testing |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO 376:2011 | Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines |
| ISO 3611:2010 | Geometrical product specifications (GPS) — Dimensional measuring equipment: Micrometers for external measurements — Design and metrological characteristics |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| IEC 61788-5:2013 | Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.