IEC 62280-1:2002
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Railway applications - Communication, signalling and processing systems - Part 1: Safety-related communication in closed transmission systems
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
06-02-2014
English - French
16-10-2002
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Definitions
4 Reference architecture
5 Relation between the characteristics of the
transmission system and safety procedures
5.1 Functional integrity requirement
5.2 Safety integrity requirements
6 Safety procedure requirements
6.1 General
6.2 Communication between safety-related-equipment
6.3 Communication between safety-related and non
safety-related equipment
6.4 Communication between non safety-related-equipment
7 Safety code requirements
7.1 General requirements
7.2 Safety target
7.3 Length of safety code
Annex A (informative) Length of safety code
Applicable to safety-related electronic systems using a closed transmission system for communication purposes. Gives the basic requirements needed in order to achieve safety-related communication between safety-related equipment connected to the transmission system. Not applicable to existing systems which had already been accepted prior to the release of this standard. However, as far as is reasonably practicable, this standard shall be applied to modifications and extensions to existing systems, subsystems and equipment.
DevelopmentNote |
Stability Date: 2014. (10/2012)
|
DocumentType |
Standard
|
Pages |
33
|
PublisherName |
International Electrotechnical Committee
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
NEN IEC 62280-1 : 2003 | Identical |
CEI EN 61784-3-12 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-12: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 12 |
BS EN 61800-5-2:2017 | Adjustable speed electrical power drive systems Safety requirements. Functional |
IEC 61800-5-2:2016 | Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
13/30268854 DC : 0 | BS EN 62290-1 ED.2 - RAILWAY APPLICATIONS - URBAN GUIDED TRANSPORT MANAGEMENT AND COMMAND/CONTROL SYSTEMS - PART 1: SYSTEM PRINCIPLES AND FUNDAMENTAL CONCEPTS |
BS EN 61784-3-8:2010 | Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 8 |
CEI 44-19 : 2008 | SAFETY OF MACHINERY - GUIDELINE FOR THE USE OF COMMUNICATION SYSTEMS IN SAFETY-RELATED APPLICATIONS |
08/30193509 DC : DRAFT NOV 2008 | BS EN 61508-2 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS |
NF EN 61508-2 : 2011 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS |
EN 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems |
EN 61784-3-1:2010 | Industrial communication networks - Profiles - Part 3-1: Functional safety fieldbuses - Additional specifications for CPF 1 |
EN 61557-15:2014 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems |
EN 61800-5-2:2017 | Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
EN 61784-3-6:2010 | Industrial communication networks - Profiles - Part 3-6: Functional safety fieldbuses - Additional specifications for CPF 6 |
EN 61784-3-14:2010 | Industrial communication networks - Profiles - Part 3-14: Functional safety fieldbuses - Additional specifications for CPF 14 |
13/30278416 DC : 0 | BS EN 61800-5-2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL |
04/30126130 DC : DRAFT NOV 2004 | IEC 62290-1 ED.1 - RAILWAY APPLICATIONS - URBAN GUIDED TRANSPORT MANAGEMENT AND COMMAND/CONTROL SYSTEMS - PART 1: SYSTEM PRINCIPLES AND FUNDAMENTAL CONCEPTS |
CEI EN 61784-3-6 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-6: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 6 |
I.S. EN 61508-2:2010 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS |
IEC 61784-3-12:2010 | Industrial communication networks - Profiles - Part 3-12: Functional safety fieldbuses - Additional specifications for CPF 12 |
IEC 62425:2007 | Railway applications - Communication, signalling and processing systems - Safety related electronic systems for signalling |
03/301526 DC : DRAFT FEB 2003 | IEC 62290-1 ED.1 - RAILWAY APPLICATIONS - URBAN GUIDED TRANSPORT MANAGEMENT AND COMMAND/CONTROL SYSTEMS - PART 1: SYSTEM PRINCIPLES AND FUNDAMENTAL CONCEPTS |
CEI EN 61784-3-3 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-3: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 3 |
BS EN 61784-3-1:2010 | Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 1 |
05/30134105 DC : DRAFT MAY 2005 | IEC 61800-5-2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL |
IEC 61784-3-18:2011+AMD1:2016 CSV | Industrial communication networks - Profiles - Part 3-18: Functionalsafety fieldbuses - Additional specifications for CPF 18 |
BS EN 61784-3-18 : 2011 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-18: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 18 (IEC 61784-3-18:2011) |
I.S. EN 61784-3-6:2010 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-6: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 6 |
CEI EN 61784-3-14 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-14: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 14 |
I.S. EN 61800-5-2:2017 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL |
CEI EN 61508-2 : 2011 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS |
EN 61784-3-12:2010 | Industrial communication networks - Profiles - Part 3-12: Functional safety fieldbuses - Additional specifications for CPF 12 |
IEC 61784-3-6:2010 | Industrial communication networks - Profiles - Part 3-6: Functional safety fieldbuses - Additional specifications for CPF 6 |
BS EN 61508-2:2010 | Functional safety of electrical/electronic/ programmable electronic safety-related systems Requirements for electrical/electronic/ programmable electronic safety-related systems |
PD IEC/TR 62513:2008 | Safety of machinery. Guidelines for the use of communication systems in safety-related applications |
CEI EN 61784-3-8 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-8: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 8 |
BS EN 61784-3-6:2010 | Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 6 |
08/30176210 DC : DRAFT MAY 2008 | BS EN 61784-3 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3: FUNCTIONAL SAFETY FIELD BUSES |
CEI EN 61784-3-1 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-1: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 1 |
I.S. EN 61784-3-18:2011 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-18: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 18 |
I.S. EN 61784-3-1:2010 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-1: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 1 |
CEI EN 61784-3-18 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-18: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 18 |
I.S. EN 61784-3-14:2010 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-14: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 14 |
CAN/CSA-C22.2 NO. 61508-2:17 | Functional safety of electrical/electronic/programmable electronic safety-related systems — Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (Adopted IEC 61508-2:2010, second edition, 2010-04, with Canadian deviations) | Sécurité fonctionnelle des systèmes électriques/électroniques/électroniques programmables relatifs à la sécurité — Partie 2 : Exigences pour les systèmes électriques/électroniques/électroniques programmables relatifs à la sécurité (norme IEC 61508-2:2010 adoptee, deuxième édition, 2010-04, avec exigences propres au Canada) |
IEC TR 62513:2008 | Safety of machinery - Guidelines for the use of communication systems in safety-related applications |
IEC 61800-5-2:2016 RLV | Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
12/30228018 DC : 0 | BS EN 61557-15 - ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 15: FUNCTIONAL SAFETY REQUIREMENTS FOR INSULATION MONITORING DEVICES AND FOR EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS |
IEC 61557-15:2014 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems |
IEC 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508) |
CEI EN 61784-3-2 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-2: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 2 |
13/30294106 DC : 0 | BS EN 61784-3 ED 3.0 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3: FUNCTIONAL SAFETY FIELDBUSES - GENERAL RULES AND PROFILE DEFINITIONS |
BS EN 61784-3-12:2010 | Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 12 |
I.S. EN 61784-3-12:2010 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-12: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 12 |
13/30200410 DC : 0 | BS EN 62580-1 ED 1.0 - ELECTRONIC RAILWAY EQUIPMENT - ON-BOARD MULTIMEDIA AND TELEMATIC SUBSYSTEMS FOR RAILWAYS - PART 1: GENERAL ARCHITECTURE |
13/30294110 DC : 0 | BS EN 61784-3-X ED 1.0 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-X: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF X |
BS EN 61784-3-14:2010 | Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 14 |
05/30143456 DC : DRAFT DEC 2005 | IEC 61508-2 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS |
CEI EN 61784-3-13 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-13: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 13 |
UNE-EN 61508-2:2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems |
I.S. EN 61557-15:2014 | ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 15: FUNCTIONAL SAFETY REQUIREMENTS FOR INSULATION MONITORING DEVICES IN IT SYSTEMS AND EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS |
EN 61784-3-18:2011/A1:2017 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-18: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 18 (IEC 61784-3-18:2011/A1:2016) |
IEC 61784-3-14:2010 | Industrial communication networks - Profiles - Part 3-14: Functional safety fieldbuses - Additional specifications for CPF 14 |
IEC 61784-3-1:2010 | Industrial communication networks - Profiles - Part 3-1: Functional safety fieldbuses - Additional specifications for CPF 1 |
BS EN 61557-15:2014 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems |
CEI EN 61800-5-2:2017 | Adjustable speed electrical power drive systems Part 5-2: Safety requirements - Functional |
IEC 62279:2015 | Railway applications - Communication, signalling and processing systems - Software for railway control and protection systems |
IEC 62278:2002 | Railway applications - Specification and demonstration of reliability, availability, maintainability and safety (RAMS) |
ENV 50129 : DRAFT 98 | RAILWAY APPLICATIONS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.