IEC 62986:2017
Current
The latest, up-to-date edition.
Plugs, socket-outlets and couplers with arcuate contacts
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
28-09-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Standard ratings
6 Classification
7 Marking
8 Dimensions
9 Protection against electric shock
10 Provisions for earthing
11 Terminals and terminations
12 Resistance to ageing of rubber and thermoplastic
material
13 General construction
14 Construction of socket-outlets
15 Construction of plugs and connectors
16 Construction of appliance inlets
17 Degrees of protection
18 Insulation resistance and dielectric strength
19 Breaking capacity
20 Normal operation
21 Temperature rise
22 Flexible cables and their connection
23 Mechanical strength
24 Screws, current-carrying parts and connections
25 Creepage distances, clearances and distances through
sealing compound
26 Resistance to heat
27 Resistance to fire and to tracking
28 Corrosion and resistance to rusting
29 Conditional short-circuit current withstand test
30 Electromagnetic compatibility
STANDARD SHEETS
STANDARD SHEET L5-20 125 V, 20 A, two-pole three-wire
STANDARD SHEET L5-30 125 V, 30 A, two-pole three-wire
STANDARD SHEET L25-30 240 V, 30 A, two-pole three-wire
STANDARD SHEET L6-20 250 V, 20 A, two-pole three-wire
STANDARD SHEET L6-30 250 V, 30 A, two-pole three-wire
STANDARD SHEET L7-20 277 V, 20 A, two-pole three-wire
STANDARD SHEET L7-30 277 V, 30 A, two-pole three-wire
STANDARD SHEET L24-20 347 V, 20 A, two-pole three-wire
STANDARD SHEET L8-20 480 V, 20 A, two-pole three-wire
STANDARD SHEET L8-30 480 V, 30 A, two-pole three-wire
STANDARD SHEET L9-20 600 V, 20 A, two-pole three-wire
STANDARD SHEET L9-30 600 V, 30 A, two-pole three-wire
STANDARD SHEET L14-20 125/250 V, 20 A, three-pole four-wire
STANDARD SHEET L14-30 125/250 V, 30 A, three-pole four-wire
STANDARD SHEET L15-20 250 V, 20 A, three-pole four-wire
STANDARD SHEET L15-30 250 V, 30 A, three-pole four-wire
STANDARD SHEET L16-20 480 V, 20 A, three-pole four-wire
STANDARD SHEET L16-30 480 V, 30 A, three-pole four-wire
STANDARD SHEET L17-30 600 V, 30 A, three-pole four-wire
STANDARD SHEET L21-20 120/208 V, 20 A, four-pole five-wire
STANDARD SHEET L21-30 120/208 V, 30 A, four-pole five-wire
STANDARD SHEET L26-30 240/415 V, 30 A, four-pole five-wire
STANDARD SHEET L22-20 277/480 V, 20 A, four-pole five-wire
STANDARD SHEET L22-30 277/480 V, 30 A, four-pole five-wire
STANDARD SHEET L23-20 347/600 V, 20 A, four-pole five-wire
STANDARD SHEET L23-30 347/600 V, 30 A, four-pole five-wire
Bibliography
IEC 62986:2017(E) sets the general and dimensional interchangeability requirements for plugs, socket-outlets, connectors and appliance inlets with arcuate contacts of standardized configurations (hereinafter referred to as accessories), with a rated operating voltage not exceeding 600 V AC at a frequency of 50 Hz and 60 Hz and with rated currents of 20 A and 30 A, primarily intended for commercial use indoors, in conditions where the presence of water is negligible.
| Committee |
TC 23/SC 23H
|
| DevelopmentNote |
Stability Date: 2022. (10/2017)
|
| DocumentType |
Standard
|
| Pages |
88
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| IEC 60228:2004 | Conductors of insulated cables |
| IEC 60050-441:1984 | International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses |
| IEC 60364-5-51:2005 | Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules |
| IEC 60269-2:2013+AMD1:2016 CSV | Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K |
| IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV | Low-voltage fuses - Part 1: General requirements |
| ISO 2081:2008 | Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel |
| IEC 60999-1:1999 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) |
| ASTM B 172 : 2017 : REDLINE | Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors |
| ISO 1456:2009 | Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60245-4:2011 | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables |
| ISO 2093:1986 | Electroplated coatings of tin — Specification and test methods |
| IEC 61032:1997 | Protection of persons and equipment by enclosures - Probes for verification |
| IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV | Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.