DIN EN 2591-6305:2003-05
|
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6305: Optical elements; Rapid change of temperature; German and English version EN 2591-6305:2001 |
DIN 58142:2006-02
|
TESTING OF FIBRE OPTIC ELEMENTS; DETERMINATION OF THE RESISTANCE AGAIN ENVIRONMENTAL CONDITIONS |
IEEE 577-2012
|
IEEE Standard Requirements for Reliability Analysis in the Design and Operation of Safety Systems for Nuclear Power Generating Stations |
NFPA 262 : 2015
|
METHOD OF TEST FOR FLAME TRAVEL AND SMOKE OF WIRES AND CABLES FOR USE IN AIR-HANDLING SPACES |
DIN EN 61300-2-45:2000-09
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-45: TESTS; DURABILITY TEST BY WATER IMMERSION |
IEEE 1202-2006
|
IEEE Standard for Flame-Propagation Testing of Wire & Cable |
IEEE 99-2007 REDLINE
|
IEEE Recommended Practice for the Preparation of Test Procedures for the Thermal Evaluation of Insulation Systems for Electrical Equipment |
TIA/EIA 455-11 : D2010(R2014)
|
FOTP-11 - VIBRATION TEST PROCEDURE FOR FIBER OPTIC COMPONENTS AND CABLES |
IEEE 1-2000
|
IEEE Recommended Practice - General Principles for Temperature Limits in the Rating of Electrical Equipment and for the Evaluation of Electrical Insulation |
TIA 455-33 : B2005(R2013)
|
OPTICAL FIBER CABLE TENSILE LOADING AND BENDING TEST |
DIN EN 61300-2-4:2014-01 (Draft)
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-4: TESTS: FIBRE/CABLE RETENTION |
DIN 58141-7:2013-07
|
MEASUREMENT OF FIBER OPTIC ELEMENTS - PART 7: DETERMINATION OF TENSILE LOAD OF FIBER OPTIC CABLES |
TIA/EIA 455-73 : 97(R2013)
|
PROCEDURE FOR MEASURING TEMPERATURE AND HUMIDITY CYCLING AGING EFFECTS OF MECHANICAL CHARACTERISTICS OF OPTICAL FIBERS |
DIN EN 2591-6403:2003-05
|
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6403: Optical elements; Vibrations; German and English version EN 2591-6403:2001 |
IEEE 383-2015
|
IEEE Standard for Qualifying Electric Cables and Splices for Nuclear Facilities |
DIN EN 61300-2-32:1998-09
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-32: TESTS; WATER VAPOUR PERMEATION |
DIN EN 2591-6402:2003-05
|
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6402: Optical elements; Chocs; German and English version EN 2591-6402:2001 |
IEEE 344-2013
|
IEEE Standard for Seismic Qualification of Equipment for Nuclear Power Generating Stations |
DIN EN 61300-2-48:2009-12
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-48: TESTS - TEMPERATURE-HUMIDITY CYCLING |
DIN EN 2591-6307:2003-05
|
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6307: Optical elements; Salt mist; German and English version EN 2591-6307:2001 |
TIA 569 : D2015 AMD 1 2016
|
TELECOMMUNICATIONS PATHWAYS AND SPACES |
DIN EN 61300-2-21:2010-08
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-21: TESTS - COMPOSITE TEMPERATURE/HUMIDITY CYCLIC TEST |
IEC TR 62283:2010
|
Optical fibres - Guidance for nuclear radiation tests |
ICEA S 104 696 : 2013
|
INDOOR-OUTDOOR OPTICAL FIBER CABLE |
DIN EN 61300-2-28:2014-05
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-28: TESTS - INDUSTRIAL ATMOSPHERE (SULPHUR DIOXIDE) (IEC 61300-2-28:2013) |
TIA 455-64 : 1998(R2002)
|
PROCEDURE FOR MEASURING RADIATION-INDUCED ATTENUATION IN OPTICAL FIBERS AND OPTICAL CABLES |
IEC 62005-9-2:2007
|
Reliability of fibre optic interconnecting devices and passive optical components - Part 9-2: Reliability qualification for single fibre optic connector sets - Single mode |
GR 20 CORE : ISSUE 4
|
GENERIC REQUIREMENTS FOR OPTICAL FIBER AND OPTICAL FIBER CABLE |
DIN EN 2591-617:2002-12
|
AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 617: OPTICAL ELEMENTS - TEMPERATURE CYCLING |
UL 2024:5ED 2014-03
|
Cable Routing Assemblies and Communications Raceways |
TIA/EIA 568-3 : D2016
|
OPTICAL FIBER CABLING AND COMPONENTS STANDARD |
IEEE 101 : 1987
|
GUIDE FOR THE STATISTICAL ANALYSIS OF THERMAL LIFE TEST DATA |
DIN EN 62005-2:2002-02
|
RELIABILITY OF FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PART 2: QUANTITATIVE ASSESSMENT OF RELIABILITY BASED ON ACCELERATED AGEING TESTS; TEMPERATURE AND HUMIDITY; STEADY STATE |
DIN EN 61300-2-1:2010-07
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-1: TESTS - VIBRATION (SINUSOIDAL) |
NFPA 70 : 2017
|
NATIONAL ELECTRICAL CODE |
UL 1666:5ED 2007-02
|
Test for Flame Propagation Height of Electrical and Optical-Fiber Cables Installed Vertically in Shafts |
IEEE 1205-2000
|
IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations |
IEEE 1205-2014
|
IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Electrical Equipment Used in Nuclear Power Generating Stations and Other Nuclear Facilities |
IEEE 344-2004
|
IEEE Recommended Practice for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations |
IEEE 98-2002
|
IEEE Standard for the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials |
IEEE 323-2003
|
IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations |
IEEE 690-2004
|
IEEE Standard for the Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations |
TIA/EIA 455-72 : 97(R2013)
|
PROCEDURE FOR MEASURING TEMPERATURE AND HUMIDITY CYCLING AGING EFFECTS ON OPTICAL CHARACTERISTICS OF OPTICAL FIBERS |
DIN EN 3745-504:2003-05
|
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 504: Micro bending test; German and English version EN 3745-504:2002 |
TR NWT 001322 : ISSUE 1
|
GENERIC REQUIREMENTS FOR STEAM-RESISTANT CABLES |
DIN EN 2591-6317:2003-05
|
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6317: Optical elements; Flammability; German and English version EN 2591-6317:2001 |
IEEE 572-2006
|
IEEE Standard for Qualification of Class 1E Connection Assemblies for Nuclear Power Generating Stations |
DIN EN 61300-2-36:1998-09
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-36: TESTS; FLAMMABILITY (FIRE HAZARD) |
DIN EN 61300-2-34:2009-12
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-34: TESTS - RESISTANCE TO SOLVENTS AND CONTAMINATING FLUIDS OF INTERCONNECTING COMPONENTS AND CLOSURES |
ICEA S 83 596 : 2016
|
INDOOR OPTICAL FIBER CABLE |
IEEE 352-1987
|
IEEE Guide for General Principles of Reliability Analysis of Nuclear Power Generating Station Safety Systems |
DIN EN 2591-6315:2003-05
|
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6315: Optical elements; Fluid resistance; German and English version EN 2591-6315:2001 |
DIN EN 61300-2-31:1998-09
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-31: TESTS; NUCLEAR RADIATION |
DIN 58141-8:2011-03
|
Measurement of fiber optic elements - Part 8: Determination of the mechanical bendig radius for short-term applications of light guide cables; Text in German and English |
DIN EN 2591-6318:2003-05
|
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6318: Optical elements; Fire resistance; German and English version EN 2591-6318:2001 |
IEEE 338-2012
|
IEEE Standard for Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety |
DIN EN 60793-1-54 : 2013
|
OPTICAL FIBRES - PART 1-54: MEASUREMENT METHODS AND TEST PROCEDURES - GAMMA IRRADIATION (IEC 60793-1-54:2012) |
IEEE 603-2009 REDLINE
|
IEEE Standard Criteria for Safety Systems for Nuclear Power Generating Stations |