ISA MC96.1 : 1982
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
TEMPERATURE MEASUREMENT THERMOCOUPLES
23-07-2013
01-01-1982
1 Coding of thermocouple wire and extension wires
2 Terminology, wire size, upper temperature limit,
and initial calibration tolerance for thermocouples
and extension wire
2.1 Scope and purpose
2.2 Terminology and symbols
2.3 Wire sizes
2.4 Upper temperature limits
2.5 Tolerance of initial calibration
3 Non-ceramic insulation of thermocouple and extension
wires
4 Temperature-EMF tables for thermocouples
4.1 Scope and purpose
4.2 Introduction
4.3 Use of temperature-EMF tables
Appendix A - Bare thermocouple element fabrication
Appendix B - Sheathed thermocouple element fabrication
Appendix C - Thermocouples and thermocouple extension
wires - selection, assembly, and installation
Appendix D - Thermocouples - checking procedures
Bibliography
Applies to thermocouples and extension wire. Also establishes terminology, symbols, normal wire size, recommended upper temperature limit, and tolerance for thermocouples and extension wire.
| DevelopmentNote |
Supersedes ANSI MC96.1 (03/2002)
|
| DocumentType |
Standard
|
| PublisherName |
International Society of Automation
|
| Status |
Withdrawn
|
| Supersedes |
| 15/30321799 DC : 0 | BS EN 1287 - SANITARY TAPWARE - LOW PRESSURE THERMOSTATIC MIXING VALVES - GENERAL TECHNICAL SPECIFICATIONS |
| ASTM D 3711 : 1995 : R2005 | Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors |
| IEEE 1242-1999 | IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants |
| PREN 1287 : DRAFT 2015 | SANITARY TAPWARE - LOW PRESSURE THERMOSTATIC MIXING VALVES - GENERAL TECHNICAL SPECIFICATION |
| DIN EN 1287:2015-07 (Draft) | SANITARY TAPWARE - LOW PRESSURE THERMOSTATIC MIXING VALVES - GENERAL TECHNICAL SPECIFICATION |
| ASTM D 3711 : 1995 : R2009 | Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors (Withdrawn 2016) |
| ASTM D 3711 : 1995 | Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors |
| EN 1111:2017 | Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification |
| EN 1287:2017 | Sanitary tapware - Low pressure thermostatic mixing valves - General technical specification |
| DIN EN 1287:2017-10 | SANITARY TAPWARE - LOW PRESSURE THERMOSTATIC MIXING VALVES - GENERAL TECHNICAL SPECIFICATION |
| DIN EN 1111:2017-10 | SANITARY TAPWARE - THERMOSTATIC MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATION |
| ASME A112.18.1 : 2012 | PLUMBING SUPPLY FITTINGS |
| MIL-DTL-24643 Revision C:2009 | Cables, Electric, Low Smoke, Halogen-Free, for Shipboard Use, General Specification for |
| ASME A112.18.1 : 2012 : R2017 | PLUMBING SUPPLY FITTINGS |
| ASHRAE 94.2 : 2010 | METHOD OF TESTING THERMAL STORAGE DEVICES WITH ELECTRICAL INPUT AND THERMAL OUTPUT BASED ON THERMAL PERFORMANCE |
| 13/30280712 DC : 0 | BS EN 1111 - SANITARY TAPWARE - THERMOSTATIC MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATION |
| ASTM D 3711 : 1995 : R2000 : EDT 1 | Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors |
| CSA 6.19-17 | Residential carbon monoxide alarming devices |
| CSA C22.2 No. 9.0 : 1996 : R2011 | GENERAL REQUIREMENTS FOR LUMINAIRES |
| CSA C22.2 No. 9.0 : 1996 : INC : SUP P1 : 1997 : R2016 | GENERAL REQUIREMENTS FOR LUMINAIRES |
| I.S. EN 1111:2017 | SANITARY TAPWARE - THERMOSTATIC MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATION |
| I.S. EN 1287:2017 | SANITARY TAPWARE - LOW PRESSURE THERMOSTATIC MIXING VALVES - GENERAL TECHNICAL SPECIFICATION |
| 15/30321802 DC : 0 | BS EN 1111 - SANITARY TAPWARE - THERMOSTATIC MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATION |
| UL 1993:5ED 2017-01-27 | Self-Ballasted Lamps and Lamp Adapters |
| CSA C22.2 No. 66.1 : 2006 : INC : UPD 2 : 2013 : R201100 | LOW VOLTAGE TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 250.0 : 2018 | |
| C22.2 NO. 1993-17 | Self-ballasted lamps and lamp adapters (Trinational standard with NMX-J-578/1-ANCE and UL 1993) |
| CSA C22.2 No. 66.1 : 2006 : INC : UPD 1 : 2012 : R201100 | LOW VOLTAGE TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 263 : 2015 | FIRE PUMP CONTROLLERS |
| CSA C22.2 No. 66.1 : 2006 : R2011 | LOW VOLTAGE TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 66.1 : 2006 | LOW VOLTAGE TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 66.1 : 2006 : R2015 | LOW VOLTAGE TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
| CSA B125.1:2012 | PLUMBING SUPPLY FITTINGS |
| 14/30295943 DC : 0 | BS ISO 6487 - ROAD VEHICLES - MEASUREMENT TECHNIQUES IN IMPACT TESTS - INSTRUMENTATION |
| 10/30219217 DC : 0 | BS ISO 6487 - ROAD VEHICLES - MEASUREMENT TECHNIQUES IN IMPACT TESTS - INSTRUMENTATION |
| CSA C22.2 No. 255 : 2004 | NEON TRANSFORMERS AND POWER SUPPLIES |
| BS ISO 6487 : 2015 | ROAD VEHICLES - MEASUREMENT TECHNIQUES IN IMPACT TESTS - INSTRUMENTATION |
| CSA C22.2 No. 255 : 2004 : R2014 | NEON TRANSFORMERS AND POWER SUPPLIES |
| 13/30276640 DC : 0 | BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY |
| CSA C22.2 No. 250.0 : 2008 : INC : UPD 2 : 2012 | |
| CSA C22.2 No. 250.0 :2008 | |
| BS EN 1111:2017 | Sanitary tapware. Thermostatic mixing valves (PN 10). General technical specification |
| IEC 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| CSA C22.2 No. 250.0 : 2008 : R2013 | |
| BS EN 1287:2017 | Sanitary tapware. Low pressure thermostatic mixing valves. General technical specification |
| 13/30280715 DC : 0 | BS EN 1287 - SANITARY TAPWARE - LOW PRESSURE THERMOSTATIC MIXING VALVES - GENERAL TECHNICAL SPECIFICATIONS |
| CSA C22.2 No. 89 : 2015 | SWIMMING-POOL LUMINAIRES, SUBMERSIBLE LUMINAIRES, AND ACCESSORIES |
| IEEE 317-2013 REDLINE | IEEE Standard for Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations |
| DIN EN 1111:2015-07 (Draft) | SANITARY TAPWARE - THERMOSTATIC MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATION |
| ISO 6487:2015 | Road vehicles — Measurement techniques in impact tests — Instrumentation |
| ASTM E 220 : 2013 : REDLINE | Standard Test Method for Calibration of Thermocouples By Comparison Techniques |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.