ISO 10846-4:2003
Current
The latest, up-to-date edition.
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
10-10-2003
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 10846-4:2003 specifies two methods for determining the dynamic transfer stiffness for translations of resilient elements other than resilient supports. Examples are resilient bellows, shaft couplings, power supply cables, hoses and pipe hangers. Elements filled with liquids, such as oil or water, are excluded.
The methods are applicable to resilient elements with flat flanges or flat clamp interfaces. It is not necessary that the flanges be parallel.
The direct method can be applied in the frequency range from 1 Hz up to a frequency that is usually determined by the frame resonance of the test arrangement (typically 300 Hz for test rigs with dimensions of the order of 1 m).
The indirect method covers a frequency range that is determined by the test set-up and the isolator under test. The range is typically from a lower frequency between 20 Hz and 50 Hz to an upper frequency between 2 kHz and 5 kHz.
The data obtained according to the methods specified in ISO 10846-4:2003 can be used for product information provided by manufacturers and suppliers, information during product development, quality control, and calculation of the transfer of vibration through resilient elements.
| Committee |
ISO/TC 43/SC 1
|
| DevelopmentNote |
Supersedes ISO/DIS 10846-4 (05/2004)
|
| DocumentType |
Standard
|
| Pages |
33
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| NF EN ISO 10846-4 : 2004 | Identical |
| NBN EN ISO 10846-4 : 2003 | Identical |
| NEN EN ISO 10846-4 : 2003 | Identical |
| I.S. EN ISO 10846-4:2003 | Identical |
| PN EN ISO 10846-4 : 2006 | Identical |
| SN EN ISO 10846-4 : 2003 | Identical |
| UNI EN ISO 10846-4 : 2007 | Identical |
| SS-EN ISO 10846-4 : 2003 | Identical |
| BS EN ISO 10846-4:2003 | Identical |
| UNE-EN ISO 10846-4:2004 | Identical |
| EN ISO 10846-4:2003 | Identical |
| DIN EN ISO 10846-4:2004-02 | Identical |
| BS ISO 2017-1:2005 | Mechanical vibration and shock. Resilient mounting systems Technical information to be exchanged for the application of isolation systems |
| BS EN ISO 10846-2:2008 | Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Direct method for determination of the dynamic stiffness of resilient supports for translatory motion |
| ONORM EN 12354-5 : 2011 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
| I.S. EN 12354-5:2009 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
| DIN EN 12354-5:2009-10 | Building acoustics - Estimation of acoustic performance of building from the performance of elements - Part 5: Sounds levels due to the service equipment |
| I.S. EN ISO 10846-1:2008 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 1: PRINCIPLES AND GUIDELINES |
| I.S. EN ISO 10846-2:2008 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| ISO 2017-1:2005 | Mechanical vibration and shock — Resilient mounting systems — Part 1: Technical information to be exchanged for the application of isolation systems |
| DIN EN ISO 10846-1:2008-11 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 1: PRINCIPLES AND GUIDELINES |
| ISO 10846-2:2008 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion |
| UNI EN ISO 10846-1 : 2008 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 1: PRINCIPLES AND GUIDELINES |
| UNI EN ISO 10846-2 : 2008 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| UNI EN 12354-5 : 2009 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
| BS EN ISO 10846-1:2008 | Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Principles and guidelines |
| BS EN 12354-5:2009 | Building acoustics. Estimation of acoustic performance of building from the performance of elements Sounds levels due to the service equipment |
| ISO 10846-1:2008 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 1: Principles and guidelines |
| EN ISO 10846-1:2008 | Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines (ISO 10846-1:2008) |
| EN ISO 10846-2:2008 | Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008) |
| DIN EN ISO 10846-2:2008-11 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| ISO 16063-21:2003 | Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer |
| ISO 10846-3:2002 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion |
| ISO 7626-1:2011 | Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 1: Basic terms and definitions, and transducer specifications |
| ISO 10846-5:2008 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion |
| ISO 266:1997 | Acoustics — Preferred frequencies |
| ISO 7626-2:2015 | Mechanical vibration and shock Experimental determination of mechanical mobility Part 2: Measurements using single-point translation excitation with an attached vibration exciter |
| ISO 2041:2009 | Mechanical vibration, shock and condition monitoring Vocabulary |
| EN ISO 10846-1:2008 | Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines (ISO 10846-1:2008) |
| ISO 10846-1:2008 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 1: Principles and guidelines |
| ISO 5348:1998 | Mechanical vibration and shock Mechanical mounting of accelerometers |
| EN ISO 266:1997 | Acoustics - Preferred frequencies (ISO 266:1997) |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| ISO 10846-2:2008 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.