ISO 2041:2009

Withdrawn

Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View superseded by

Mechanical vibration, shock and condition monitoring Vocabulary

Available format(s): Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

Withdrawn date: 26-10-2018

Language(s): English, Russian

Published date: 17-07-2009

Publisher: International Organization for Standardization

Abstract - (Show below) - (Hide below)

ISO 2041:2009 defines terms and expressions unique to the areas of mechanical vibration, shock and condition monitoring.

General Product Information - (Show below) - (Hide below)

Development Note	Also Numbered as ANSI S2.1. (12/2009) DRAFT ISO/DIS 2041 is also available for this standard. (09/2015)
Document Type	Standard
ISBN
Pages
Published
Publisher	International Organization for Standardization
Status	Withdrawn
Superseded By	ISO 2041:2018 ISO 20411:2018
Supersedes	ISO 2041:1990

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
GOST R ISO 2041 : 2012	Identical
BS ISO 2041:2009	Identical
SANS 2041 : 1ED 2009(R2014)	Identical
BIS IS/ISO 2041 : 2009	Identical
NS ISO 2041 : 2009	Identical
NEN ISO 2041 : 2009	Identical
SS-ISO 2041:2009	Identical
NS 4925 : 1984	Identical
BS 3015:1976	Similar to
NF ISO 2041 : 1993	Identical
UNE 95010:1986	Identical
BIS IS 11717 : 2000(R2005)	Identical
DIN 1311 Beiblatt 1:1999-11 (Draft)	Similar to

Standards Referenced By This Book - (Show below) - (Hide below)

ISO 5406:1980	The mechanical balancing of flexible rotors
03/315162 DC : DRAFT SEP 2003	ISO 16063-22 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 22 - SHOCK CALIBRATION BY COMPARISON TO A REFERENCE TRANSDUCER
BS ISO 2017-1:2005	MECHANICAL VIBRATION AND SHOCK - RESILIENT MOUNTING SYSTEMS - PART 1: TECHNICAL INFORMATION TO BE EXCHANGED FOR THE APPLICATION OF ISOLATION SYSTEMS
07/30163187 DC : 0	BS ISO 20283-2 - MECHANICAL VIBRATION - MEASUREMENT OF VIBRATION ON SHIPS - PART 2: STRUCTURAL VIBRATION
BS ISO 16063-22 : 2005	METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 22: SHOCK CALIBRATION BY COMPARISON TO A REFERENCE TRANSDUCER
15/30297073 DC : 0	BS ISO 13373-9 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VIBRATION CONDITION MONITORING - PART 9: DIAGNOSTIC TECHNIQUES FOR ELECTRIC MOTORS
ANSI/ASA S2.61 : 1989(R2015)	GUIDE TO THE MECHANICAL MOUNTING OF ACCELEROMETERS
09/30195890 DC : DRAFT OCT 2009	BS ISO 13379-1 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - DATA INTERPRETATION AND DIAGNOSTICS TECHNIQUES - PART 1: GENERAL GUIDELINES
CEI EN 60068-2-47 : 2006	ENVIRONMENTAL TESTING - PART 2-47: TESTS - MOUNTING OF SPECIMENS FOR VIBRATION, IMPACT AND SIMILAR DYNAMIC TESTS
BS ISO 18431-4:2007	MECHANICAL VIBRATION AND SHOCK - SIGNAL PROCESSING - PART 4: SHOCK-RESPONSE SPECTRUM ANALYSIS
CSA M5008 : 2003	AGRICULTURAL WHEELED TRACTORS AND FIELD MACHINERY - MEASUREMENT OF WHOLE-BODY VIBRATION OF THE OPERATOR
DIN EN ISO 8041-1:2017-10	HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION - PART 1: GENERAL PURPOSE VIBRATION METERS (ISO 8041-1:2017)
BS 6414:1983	SPECIFYING CHARACTERISTICS OF VIBRATION AND SHOCK ISOLATORS
BS ISO 14694 : 2003	FANS FOR GENERAL PURPOSES - PART 7: SPECIFICATIONS FOR BALANCING AND VIBRATION
ISO 2017-2:2007	Mechanical vibration and shock — Resilient mounting systems — Part 2: Technical information to be exchanged for the application of vibration isolation associated with railway systems
DIN 1311-2:2002-08	(MECHANICAL) VIBRATIONS, OSCILLATIONS AND VIBRATION SYSTEMS - PART 2: LINEAR VIBRATION SYSTEMS WITH SINGLE DEGREE OF FREEDOM
16/30341458 DC : 0	BS ISO 16063-45 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 45: IN-SITU CALIBRATION OF TRANSDUCERS WITH BUILT IN CALIBRATION COIL
BS ISO 18312-2:2012	Mechanical vibration and shock. Measurement of vibration power flow from machines into connected support structures Indirect method
17/30368249 DC : 0	BS ISO 20816-4 - MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF MACHINE VIBRATION - PART 4: GAS TURBINES IN EXCESS OF 3 MW, WITH FLUID-FILM BEARINGS
DIN ISO 10816-21 E : 2015	MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 21: HORIZONTAL AXIS WIND TURBINES WITH GEARBOX (ISO 10816-21:2015)
DIN ISO 13373-3 E : 2015	CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VIBRATION CONDITION MONITORING - PART 3: GUIDELINES FOR VIBRATION DIAGNOSIS (ISO 133733:2015)
UNI ISO 10816-4 : 2010	MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
PD CEN/TR 1030-2:2016	Hand-arm vibration. Guidelines for vibration hazards reduction Management measures at the workplace
16/30295476 DC : 0	BS ISO 8528-9 - RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 9: MEASUREMENT AND EVALUATION OF MECHANICAL VIBRATIONS
03/109881 DC : DRAFT JULY 2003	ISO 15242-2 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 2: RADIAL BALL BEARINGS WITH CYLINDRICAL BORE AND CYLINDRICAL OUTSIDE SURFACE
CSA ISO 5349-2 : 2016	MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE
BS 6140-1:1981	TEST EQUIPMENT FOR GENERATING VIBRATION - METHODS OF DESCRIBING CHARACTERISTICS OF ELECTRODYNAMIC TEST EQUIPMENT FOR GENERATING VIBRATION
16/30319147 DC : 0	BS ISO 20283-3:2006/AMD 1 - MECHANICAL VIBRATION - MEASUREMENT OF VIBRATION ON SHIPS - PART 3: PRE-INSTALLATION VIBRATION MEASUREMENT OF SHIPBOARD EQUIPMENT
CEI EN 60068-2-57 : 2014	ENVIRONMENTAL TESTING - PART 2-57: TESTS - TEST FF: VIBRATION - TIME HISTORY AND SINE-BEAT METHOD
BS 6841:1987	Guide to measurement and evaluation of human exposure to whole-body mechanical vibration and repeated shock
BS ISO 13381-1:2015	Condition monitoring and diagnostics of machines. Prognostics General guidelines
BS ISO 10056:2001	MECHANICAL VIBRATION - MEASUREMENT AND ANALYSIS OF WHOLE-BODY VIBRATION TO WHICH PASSENGERS AND CREW ARE EXPOSED IN RAILWAY VEHICLES
09/30191459 DC : 0	BS ISO 16063-41 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 41: CALIBRATION OF LASER VIBROMETERS
ABMA ISO 15242-3 : 2012	ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 3: RADIAL SPHERICAL AND TAPERED ROLLER BEARINGS WITH CYLINDRICAL BORE AND OUTSIDE SURFACE
ISO 7626-2:2015	Mechanical vibration and shock Experimental determination of mechanical mobility Part 2: Measurements using single-point translation excitation with an attached vibration exciter
PD IEC/TS 62271-210:2013	High-voltage switchgear and controlgear Seismic qualification for metal enclosed and solid-insulation enclosed switchgear and controlgear assemblies for rated voltages above 1 kV and up to and including 52 kV
NF EN 60068 2-64 : 2008	ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE
11/30131823 DC : DRAFT MAR 2011	BS ISO 18312-1 - MECHANICAL VIBRATION AND SHOCK - MEASUREMENT OF VIBRATION POWER FLOW FROM MACHINES INTO CONNECTED SUPPORT STRUCTURES - PART 1: DIRECT METHOD
BS 7508:1995	MECHANICAL VIBRATION - METHODS AND CRITERIA FOR THE MECHANICAL BALANCING OF FLEXIBLE ROTORS
06/30146489 DC : DRAFT FEB 2006	ISO 10137 - BASIS FOR DESIGN OF STRUCTURES - SERVICEABILITY OF BUILDINGS AND WALKWAYS AGAINST VIBRATIONS
09/30201352 DC : 0	BS ISO 7626-1 - VIBRATION AND SHOCK - EXPERIMENTAL DETERMINATION OF MECHANICAL MOBILITY - PART 1: BASIC DEFINITIONS AND TRANSDUCERS
16/30320661 DC : 0	BS ISO 21940-2 - MECHANICAL VIBRATION - ROTOR BALANCING - PART 2: VOCABULARY
BS EN 60994:1993	GUIDE FOR FIELD MEASUREMENT OF VIBRATIONS AND PULSATIONS IN HYDRAULIC MACHINES (TURBINES, STORAGE PUMPS AND PUMP-TURBINES)
ISO 21940-2:2017	Mechanical vibration — Rotor balancing — Part 2: Vocabulary
ISO 5347-0:1987	Methods for the calibration of vibration and shock pick-ups Part 0: Basic concepts
CEI EN 60255-21-1 : 1997	ELECTRICAL RELAYS - PART 21: VIBRATION, SHOCK, BUMP AND SEISMIC TESTS ON MEASURING RELAYS AND PROTECTION EQUIPMENT - SECTION 1: VIBRATION TESTS (SINUSOIDAL)
04/30115861 DC : DRAFT JUL 2004	ISO 16063-15 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 15: PRIMARY ANGULAR VIBRATION CALIBRATION BY LASER INTERFEROMETRY
BS ISO 7626-2:2015	MECHANICAL VIBRATION AND SHOCK - EXPERIMENTAL DETERMINATION OF MECHANICAL MOBILITY - PART 2: MEASUREMENTS USING SINGLE-POINT TRANSLATION EXCITATION WITH AN ATTACHED VIBRATION EXCITER
ISO 21940-12:2016	Mechanical vibration — Rotor balancing — Part 12: Procedures and tolerances for rotors with flexible behaviour
BS ISO 7919-3 : 2009	MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 3: COUPLED INDUSTRIAL MACHINES
PD ISO/TR 17243-2:2017	Machine tool spindles. Evaluation of spindle vibrations by measurements on non-rotating parts Direct-driven spindles and belt-driven spindles with rolling element bearings operating at speeds between 600 r/min and 30 000 r/min
14/30299574 DC : 0	BS EN 61300-2-9 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-9: TESTS - SHOCK
BS ISO 20283-5:2016	Mechanical vibration. Measurement of vibration on ships Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships
BS ISO 2017-2:2007	Mechanical vibration and shock. Resilient mounting systems Technical information to be exchanged for the application of vibration isolation associated with railway systems
BS ISO 18431-3:2014	MECHANICAL VIBRATION AND SHOCK - SIGNAL PROCESSING - PART 3: METHODS OF TIME-FREQUENCY ANALYSIS
ISO 18431-3:2014	Mechanical vibration and shock Signal processing Part 3: Methods of time-frequency analysis
EN ISO 8041:2005/AC:2008	HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION
ANSI S2.62 : 2009	SHOCK TEST REQUIREMENTS FOR EQUIPMENT IN A RUGGED SHOCK ENVIRONMENT
07/30166815 DC : 0	BS EN 60068-2-65 AMD1 - ENVIRONMENTAL TESTING - PART 2-65: METHODS OF TEST - TEST FG - VIBRATION, ACOUSTICALLY INDUCED
I.S. EN 60068-3-8:2003	ENVIRONMENTAL TESTING - PART 3-8: SUPPORTING DOCUMENTATION AND GUIDANCE - SELECTING AMONGST VIBRATION TESTS
BS EN 60068-2-47:2005	ENVIRONMENTAL TESTING - PART 2-47: TESTS - MOUNTING OF SPECIMENS FOR VIBRATION, IMPACT AND SIMILAR DYNAMIC TESTS
BS ISO 5007:2003	AGRICULTURAL WHEELED TRACTORS - OPERATOR'S SEAT - LABORATORY MEASUREMENT OF TRANSMITTED VIBRATION
03/303212 DC : DRAFT FEB 2003	ISO 2017-1 - MECHANICAL VIBRATION AND SHOCK - RESILIENT MOUNTING SYSTEMS - PART 1: APPLICATION OF SOURCE AND RECEIVER ISOLATION
05/30130575 DC : DRAFT MAR 2005	ISO 18431-4 - MECHANICAL VIBRATION AND SHOCK - SIGNAL PROCESSING - PART 4: SHOCK RESPONSE SPECTRUM ANALYSIS
BS EN 60068-2-57:2013	ENVIRONMENTAL TESTING - PART 2-57: TESTS - TEST FF: VIBRATION - TIME-HISTORY AND SINE-BEAT METHOD
BS ISO 13379:2003	CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES ON DATA INTERPRETATION AND DIAGNOSTICS TECHNIQUES
BS ISO 13380:2002	CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES ON USING PERFORMANCE PARAMETERS
09/30192810 DC : DRAFT JAN 2009	BS ISO 10816-2 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN
BS ISO 14963:2003	MECHANICAL VIBRATION AND SHOCK - GUIDELINES FOR DYNAMIC TESTS AND INVESTIGATIONS ON BRIDGES AND VIADUCTS
BS 5265-2(1981) : 1981	MECHANICAL BALANCING OF ROTATING BODIES - METHODS FOR THE MECHANICAL BALANCING OF FLEXIBLE ROTORS
UNI ISO 13372 : 2013	CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VOCABULARY
05/30098127 DC : DRAFT NOV 2005	ISO 10846-1 - ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 1: PRINCIPLES AND GUIDELINES
BS EN 61300-2-9:2017	Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Shock
CEI EN 60068-5-2 : 2000	ENVIRONMENTAL TESTING - PART 5: GUIDE TO DRAFTING OF TEST METHODS TERMS AND DEFINITIONS
ANSI S3.18 PT1 : 2002	MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS
DIN IEC 60721-1:1993-05	ELECTRICAL ENGINEERING; CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES
ISO 13091-1:2001	Mechanical vibration Vibrotactile perception thresholds for the assessment of nerve dysfunction Part 1: Methods of measurement at the fingertips
ISO 22096:2007	Condition monitoring and diagnostics of machines Acoustic emission
BS ISO 5344 : 2004	ELECTRODYNAMIC VIBRATION GENERATING SYSTEMS - PERFORMANCE CHARACTERISTICS
BS ISO 8727 : 1997	MECHANICAL VIBRATION AND SHOCK - HUMAN EXPOSURE BIODYNAMIC COORDINATE SYSTEMS
IEC TS 60034-32:2016	Rotating electrical machines - Part 32: Measurement of stator end-winding vibration at form-wound windings
I.S. EN 60068-2-6:2008	ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL)
ISO 16063-1:1998	Methods for the calibration of vibration and shock transducers Part 1: Basic concepts
I.S. EN 61163-1:2006	RELIABILITY STRESS SCREENING - PART 1: REPAIRABLE ASSEMBLIES MANUFACTURED IN LOTS
ISO 18437-5:2011	Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 5: Poisson ratio based on comparison between measurements and finite element analysis
BS ISO 10816-4 : 2009	MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
UNI ISO 10817-1 : 2011	ROTATING SHAFT VIBRATION MEASURING SYSTEMS - PART 1: RELATIVE AND ABSOLUTE SENSING OF RADIAL VIBRATION
ISO 22266-1:2009	Mechanical vibration Torsional vibration of rotating machinery Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW
ISO 29821-1:2011	Condition monitoring and diagnostics of machines Ultrasound Part 1: General guidelines
ISO 15242-2:2015	Rolling bearings Measuring methods for vibration Part 2: Radial ball bearings with cylindrical bore and outside surface
ISO 18437-2:2005	Mechanical vibration and shock Characterization of the dynamic mechanical properties of visco-elastic materials Part 2: Resonance method
UNI ISO 22096 : 2011	CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - ACOUSTIC EMISSION
ISO 14963:2003	Mechanical vibration and shock Guidelines for dynamic tests and investigations on bridges and viaducts
ANSI S2.28 : 2009 : R2014	GUIDE FOR THE MEASUREMENT AND EVALUATION OF BROADBAND VIBRATION OF SURFACE SHIP AUXILIARY ROTATING MACHINERY
ISO 21984:2018	Ships and marine technology — Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on specific ships
ANSI S2.72 PT1 : 2002 : INC : AMD 1 : 2010 : R200700	MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS
I.S. EN 60994:1993	GUIDE FOR FIELD MEASUREMENT OF VIBRATIONS AND PULSATIONS IN HYDRAULIC MACHINES (TURBINES, STORAGE PUMPS AND PUMP-TURBINES)
ISO 13372:2004	Condition monitoring and diagnostics of machines Vocabulary
ISO 7626-1:2011	Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 1: Basic terms and definitions, and transducer specifications
ISO 16587:2004	Mechanical vibration and shock Performance parameters for condition monitoring of structures
IEC 60255-21-3:1993	Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 3: Seismic tests
SAE J2834 : 2019	RIDE INDEX STRUCTURE AND DEVELOPMENT METHODOLOGY
I.S. EN 60068-2-57:2013	ENVIRONMENTAL TESTING - PART 2-57: TESTS - TEST FF: VIBRATION - TIME-HISTORY AND SINE-BEAT METHOD (IEC 60068-2-57:2013 (EQV))
ISO 5007:2003	Agricultural wheeled tractors Operator's seat Laboratory measurement of transmitted vibration
I.S. EN 61300-2-9:2017	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-9: TESTS - SHOCK
I.S. ENV 12299:1999	RAILWAY APPLICATIONS - RIDE COMFORT FOR PASSENGERS - MEASUREMENT AND EVALUATION
DKD-R 3-1-1 : 2010	KALIBRIERUNG VON BESCHLEUNIGUNGSMESSGERAETEN NACH DEM VERGLEICHSVERFAHREN - BLATT 1: GRUNDLAGEN
I.S. EN 15461:2008	RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS
I.S. EN 60068-2-81:2003	ENVIRONMENTAL TESTING - PART 2-81: TESTS - TEST EI: SHOCK - SHOCK RESPONSE SPECTRUM SYNTHESIS
ISO 13379-1:2012	Condition monitoring and diagnostics of machines — Data interpretation and diagnostics techniques — Part 1: General guidelines
ISO 5344:2004	Electrodynamic vibration generating systems Performance characteristics
DIN EN ISO 7096:2010-02	EARTH-MOVING MACHINERY - LABORATORY EVALUATION OF OPERATOR SEAT VIBRATION
DIN EN 1299:2009-02	MECHANICAL VIBRATION AND SHOCK - VIBRATION ISOLATION OF MACHINES - INFORMATION FOR THE APPLICATION OF SOURCE ISOLATION
BS EN ISO 8041:2005	HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION
BS EN 1032 : 2003	MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE
BS EN ISO 13090-1:1998	MECHANICAL VIBRATION AND SHOCK - GUIDANCE ON SAFETY ASPECTS OF TESTS AND EXPERIMENTS WITH PEOPLE - PART 1: EXPOSURE TO WHOLE-BODY MECHANICAL VIBRATION AND REPEATED SHOCK
BS EN ISO 10846-2:2008	Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
BS EN ISO 10846-4:2003	Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Dynamic stiffness of elements other than resilient supports for translatory motion
IEC 60068-2-64:2008	Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
EN ISO 7096:2008/AC:2009	EARTH-MOVING MACHINERY - LABORATORY EVALUATION OF OPERATOR SEAT VIBRATION
IEC 62047-1:2016	Semiconductor devices - Micro-electromechanical devices - Part 1: Terms and definitions
IEC 60068-2-80:2005	Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode
EN 61300-2-9:2017	Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock
DIN EN 15433-2:2008-02	Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 2: Data acquisition and general requirements for measuring equipment
CEN/TR 1030-2:2016	Hand-arm vibration - Guidelines for vibration hazards reduction - Part 2: Management measures at the workplace
DIN EN ISO 8041:2006-06	HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION
EN 60034-14:2004/A1:2007	ROTATING ELECTRICAL MACHINES - PART 14: MECHANICAL VIBRATION OF CERTAIN MACHINES WITH SHAFT HEIGHTS 56 MM AND HIGHER - MEASUREMENT, EVALUATION AND LIMITS OF VIBRATION SEVERITY
EN 60068-2-81:2003	Environmental testing - Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis
EN 60068-2-47:2005	Environmental testing - Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests
EN 62047-1:2016	Semiconductor devices - Micro-electromechanical devices - Part 1: Terms and definitions
EN 60068-2-62 : 1995	ENVIRONMENTAL TESTING - PART 2: TEST METHODS - TEST EF: IMPACT, PENDULUM METHOD
EN 61163-1 : 2006	RELIABILITY STRESS SCREENING - PART 1: REPAIRABLE ASSEMBLIES MANUFACTURED IN LOTS
EN 60068-2-63 : 1994	ENVIRONMENTAL TESTING - PART 2: TEST METHODS - TEST EG: IMPACT, SPRING HAMMER
EN 60255-21-3:1995	Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 3: Seismic tests
EN ISO 5349-1 : 2001	MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS (ISO 5349-1:2001)
EN 1032:2003+A1:2008	Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
EN ISO 20643:2008/A1:2012	Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission - Amendment 1: Accelerometer positions (ISO 20643:2005/Amd 1:2012)
DIN EN ISO 10326-1:2017-03	MECHANICAL VIBRATION - LABORATORY METHOD FOR EVALUATING VEHICLE SEAT VIBRATION - PART 1: BASIC REQUIREMENTS (ISO 10326-1:2016)
ASME OM : 2017	OPERATION AND MAINTENANCE OF NUCLEAR POWER PLANTS
DEFSTAN 00-250(PT3)SEC1-7/1(2008) : 2008	HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTIONS 1-7 - OVERALL CONTENTS/SCOPE
DEFSTAN 00-250(PT1)/1(2008) : 2008	HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 1: OVERARCHING PEOPLE-RELATED REQUIREMENTS
DEFSTAN 00-250(PT3)SEC11/1(2008) : 2008	HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 11 - TRAINING
DEFSTAN 00-250(PT3)SEC8/1(2008) : 2008	HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 8 - PEOPLE IN SYSTEMS
DEFSTAN 00-25(PT5)/1(1992) : 1992	HUMAN FACTORS FOR DESIGNERS OF EQUIPMENT - PART 5: STRESSES AND HAZARDS
DEFSTAN 00-250(PT3)SEC9/1(2008) : 2008	HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 9 - PEOPLE CHARACTERISTICS
DEFSTAN 00-250(PT3)SEC10/1(2008) : 2008	HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 10 - SYSTEMS SAFETY
DEFSTAN 00-250(PT3)SEC15/1(2008) : 2008	HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 15 - WORK EQUIPMENT
DEFSTAN 00-250(PT3)SEC13/1(2008) : 2008	HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 13 - THE WORKPLACE
DEFSTAN 00-250(PT3)SEC12/1(2008) : 2008	HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 12 - OPERATIONS, MAINTENANCE & SUPPORT
DEFSTAN 00-250(PT3)SEC14/1(2008) : 2008	HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 14 - THE ENVIRONMENT
DEFSTAN 00-250(PT2)/1(2008) : 2008	HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 2: PARTICULAR PEOPLE-RELATED REQUIREMENTS
DEFSTAN 00-250(PT3)SEC16/1(2008) : 2008	HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 16 - LIVING SPACES
ISO 20283-2:2008	Mechanical vibration — Measurement of vibration on ships — Part 2: Measurement of structural vibration
BS ISO 15261 : 2004	VIBRATION AND SHOCK GENERATING SYSTEMS - VOCABULARY
MIL STD 1472 : G	HUMAN ENGINEERING
16/30341593 DC : 0	BS ISO 10816-3 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 3: INDUSTRIAL MACHINES WITH NOMINAL POWER ABOVE 15 KW AND NOMINAL SPEEDS BETWEEN 120 R/MIN AND 15000 R/MIN WHEN MEASURED IN SITU
15/30293881 DC : 0	BS ISO 2017-3 - MECHANICAL VIBRATION AND SHOCK - RESILIENT MOUNTING SYSTEMS - PART 3: TECHNICAL INFORMATION TO BE EXCHANGED FOR APPLICATION OF VIBRATION ISOLATION TO NEW BUILDINGS
BS ISO 16079-1:2017	Condition monitoring and diagnostics of wind turbines General guidelines
01/714317 DC : DRAFT OCT 2001	ISO 18436-2 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - ACCREDITATION OF ORGANIZATIONS AND TRAINING AND CERTIFICATION OF PERSONNEL - PART 2: VIBRATION ANALYSIS
11/30131826 DC : 0	BS ISO 18312-2 - MECHANICAL VIBRATION AND SHOCK - MEASUREMENT OF VIBRATION POWER FLOW FROM MACHINES INTO CONNECTED SUPPORT STRUCTURES - PART 2: INDIRECT METHOD
16/30342175 DC : 0	BS ISO 15242-4 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 4: RADIAL CYLINDRICAL ROLLER BEARINGS WITH CYLINDRICAL BORE AND OUTSIDE SURFACE
10/30214880 DC : 0	BS ISO 18738-1 - MEASUREMENT OF LIFT RIDE QUALITY - PART 1: LIFTS (ELEVATORS)
S.R. CEN/TR 1030-2:2016	HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 2: MANAGEMENT MEASURES AT THE WORKPLACE
I.S. EN 30326-1:1994	MECHANICAL VIBRATION - LABORATORY METHOD FOR EVALUATING VEHICLE SEAT VIBRATION - PART 1: BASIC REQUIREMENTS (ISO 10326-1:1992/AMD 2:2011)
FD ISO/TR 230-8 : OCT 2010 FD	TEST CODE FOR MACHINE TOOLS - PART 8: VIBRATION
DIN EN 15461 E : 2011	RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS
BS ISO 10227:1996	HUMAN/HUMAN SURROGATE IMPACT (SINGLE SHOCK) TESTING AND EVALUATION - GUIDANCE ON TECHNICAL ASPECTS
ISO 16079-1:2017	Condition monitoring and diagnostics of wind turbines — Part 1: General guidelines
14/30273218 DC : 0	BS ISO 13381-1 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - PROGNOSTICS - PART 1: GENERAL GUIDELINES
BS 6749-1:1986	MEASUREMENTS AND EVALUATION OF VIBRATION ON ROTATING SHAFTS - GUIDE TO GENERAL PRINCIPLES
BS 142-1.5.3(1993) : 1993 AMD 8833	ELECTRICAL PROTECTION RELAYS - INFORMATION AND REQUIREMENTS FOR ALL PROTECTION RELAYS - VIBRATION, SHOCK, BUMP AND SEISMIC TESTING - SEISMIC TESTS
ISO 18436-2:2014	Condition monitoring and diagnostics of machines Requirements for qualification and assessment of personnel Part 2: Vibration condition monitoring and diagnostics
10/30195968 DC : 0	BS ISO 18738-2 - MEASUREMENT OF RIDE QUALITY - PART 2: ESCALATORS AND MOVING WALKS
BS ISO 19499:2007	MECHANICAL VIBRATION - BALANCING - GUIDANCE ON THE USE AND APPLICATION OF BALANCING STANDARDS
13/30287977 DC : 0	BS EN ISO 1683 - ACOUSTICS - PREFERRED REFERENCE VALUES FOR ACOUSTICAL AND VIBRATORY LEVELS
BS ISO 13373-9:2017	Condition monitoring and diagnostics of machines. Vibration condition monitoring Diagnostic techniques for electric motors
DIN ISO 2954 E : 2012	MECHANICAL VIBRATION OF ROTATING AND RECIPROCATING MACHINERY - REQUIREMENTS FOR INSTRUMENTS FOR MEASURING VIBRATION SEVERITY (ISO 2954:2012)
ANSI S2.34 : 1984 : R2010	GUIDE TO THE EXPERIMENTAL DETERMINATION OF ROTATIONAL MOBILITY PROPERTIES AND THE COMPLETE MOBILITY MATRIX
05/30064424 DC : DRAFT NOV 2005	ISO 10846-5 - ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: LOW FREQUENCY DYNAMIC STIFFNESS OF ELASTIC SUPPORTS FOR TRANSLATORY MOTION (DRIVING POINT METHOD)
DIN ISO 16063-16 E : 2015	METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 16: CALIBRATION BY EARTH'S GRAVITATION (ISO 16063-16:2014)
DIN EN ISO 1683:2015-09	ACOUSTICS - PREFERRED REFERENCE VALUES FOR ACOUSTICAL AND VIBRATORY LEVELS (ISO 1683:2015)
ANSI S2.48 : 1993	SERVO-HYDRAULIC TEST EQUIPMENT FOR GENERATING VIBRATION - METHODS OF DESCRIBING CHARACTERISTICS
DIN ISO 21940-12 E : 2016	MECHANICAL VIBRATION - ROTOR BALANCING - PART 12: PROCEDURES AND TOLERANCES FOR ROTORS WITH FLEXIBLE BEHAVIOUR (ISO 21940-12:2016)
08/30179530 DC : DRAFT MAR 2008	BS ISO 22266-1 - MECHANICAL VIBRATION - TORSIONAL VIBRATION OF ROTATING MACHINERY - PART 1: LAND-BASED STEAM AND GAS TURBINE GENERATORS SETS IN EXCESS OF 50 MW
DIN ISO 2954:2012-10	Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity (ISO 2954:2012)
BS ISO 14839-4:2012	Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearings Technical guidelines
BS ISO 2631-1:1997	Mechanical vibration and shock. Evaluation of human exposure to whole-body vibration General Requirements
BS ISO 2017-3:2015	Mechanical vibration and shock. Resilient mounting systems Technical information to be exchanged for application of vibration isolation to new buildings
09/30190941 DC : DRAFT JAN 2009	BS ISO 10816-4 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
BS ISO 18738-1:2012	MEASUREMENT OF RIDE QUALITY - PART 1: LIFTS (ELEVATORS)
BS 6055:1981	METHODS FOR MEASUREMENT OF WHOLE BODY VIBRATION OF THE OPERATORS OF AGRICULTURAL WHEELED TRACTORS AND MACHINERY
ISO 18738:2003	Lifts (elevators) - Measurement of lift ride quality
DD ENV 28041:1993	HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION
DIN ISO 13373-3:2015-12	CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VIBRATION CONDITION MONITORING - PART 3: GUIDELINES FOR VIBRATION DIAGNOSIS (ISO 13373-3:2015)
ISO 18738-2:2012	Measurement of ride quality Part 2: Escalators and moving walks
BS ISO 3046-5:2001	RECIPROCATING INTERNAL COMBUSTION ENGINES PERFORMANCE - PART 5: TORSIONAL VIBRATIONS
01/708612 DC : DRAFT MAY 2001	BS ISO 14963 - MECHANICAL VIBRATION AND SHOCK - GUIDELINES FOR DYNAMIC TESTS AND INVESTIGATIONS ON BRIDGES AND VIADUCTS
04/30096361 DC : DRAFT APR 2004	ISO/DIS 15242-3 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 3: RADIAL DOUBLE-ROW SPHERICAL AND TAPERED ROLLER BEARINGS WITH CYLINDRICAL BORE AND OUTSIDE SURFACE
NF ISO 18738 : 2003	LIFTS (ELEVATORS) - MEASUREMENT OF LIFT RIDE QUALITY
BS ISO 11342:1998	MECHANICAL VIBRATION - METHODS AND CRITERIA FOR THE MECHANICAL BALANCING OF FLEXIBLE ROTORS
BS ISO 10814:1996	MECHANICAL VIBRATION - SUSCEPTIBILITY AND SENSITIVITY OF MACHINES TO UNBALANCE
BS ISO 16063-17:2016	METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 17: PRIMARY CALIBRATION BY CENTRIFUGE
BS ISO 16063-15:2006	METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 15: PRIMARY ANGULAR VIBRATION CALIBRATION BY LASER INTERFEROMETRY
BS ISO 10816-8:2014	MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 8: RECIPROCATING COMPRESSOR SYSTEMS
14/30297061 DC : 0	BS ISO 13373-3 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VIBRATION CONDITION MONITORING - PART 3: GUIDELINES FOR VIBRATION DIAGNOSIS
15/30325986 DC : 0	BS EN ISO 10326-1 - MECHANICAL VIBRATION - LABORATORY METHOD FOR EVALUATING VEHICLE SEAT VIBRATION - PART 1: BASIC REQUIREMENTS
ISO 7626-5:1994	Vibration and shock Experimental determination of mechanical mobility Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
02/210375 DC : DRAFT DEC 2002	IEC 60068-2-80 ED.1 - ENVIRONMENTAL TESTING - PART 2: TEST METHODS - TEST F(?) - MIXED MODE TESTING
13/30272883 DC : 0	BS EN ISO 5349-2:2001/AMD 1 - MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE - AMENDMENT 1
12/30264446 DC : 0	BS ISO 10816-8 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 8: RECIPROCATING COMPRESSOR SYSTEMS
BS EN 60068-2-65:2013	ENVIRONMENTAL TESTING - PART 2-65: TESTS - TEST FG: VIBRATION - ACOUSTICALLY INDUCED METHOD
BS ISO 16063-1 : 1998	METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - BASIC CONCEPTS
BS EN 60068-2-27:2009	ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK
BS 7347:1990	GUIDE FOR CHARACTERISTICS AND PERFORMANCE OF MECHANICAL SHOCK TESTING MACHINES
01/715338 DC : DRAFT NOV 2001	PREN 1915-3 - AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 3: VIBRATION MEASUREMENT METHODS
BS ISO 16063-43:2015	METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 43: CALIBRATION OF ACCELEROMETERS BY MODEL-BASED PARAMETER IDENTIFICATION
ANSI S2.31 : 1979 : R2009	METHODS FOR THE EXPERIMENTAL DETERMINATION OF MECHANICAL MOBILITY - PART 1: BASIC DEFINITIONS AND TRANSDUCERS
02/707234 DC : DRAFT MAY 2002	ISO/DIS 15261 - VIBRATION AND SHOCK GENERATING SYSTEMS - VOCABULARY
AGMA 6000 : REV B : 1996 : R2002	SPECIFICATION FOR MEASUREMENT OF LINEAR VIBRATION ON GEAR UNITS
BS ISO 1940-1:2003	Mechanical vibration. Balance quality requirements for rotors in a constant (rigid) state Specification and verification of balance tolerances
ISO 8579-2:1993	Acceptance code for gears Part 2: Determination of mechanical vibrations of gear units during acceptance testing
BS ISO 21940-12:2016	Mechanical vibration. Rotor balancing Procedures and tolerances for rotors with flexible behaviour
CEI EN 60068-2-65 : 2013	ENVIRONMENTAL TESTING - PART 2-65: TESTS - TEST FG: VIBRATION - ACOUSTICALLY INDUCED METHOD
BS ISO 18436-2:2014	CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 2: VIBRATION CONDITION MONITORING AND DIAGNOSTICS
AHRI 530 : 2005	RATING OF SOUND AND VIBRATION FOR REFRIGERANT COMPRESSORS
ANSI S2.47 : 0	VIBRATION OF BUILDINGS - GUIDELINES FOR THE MEASUREMENT OF VIBRATIONS AND EVALUATIONS ON THEIR EFFECTS ON BUILDINGS
ISO 18312-2:2012	Mechanical vibration and shock — Measurement of vibration power flow from machines into connected support structures — Part 2: Indirect method
BS EN 60068-2-55:2013	ENVIRONMENTAL TESTING - PART 2-55: TESTS - TEST EE AND GUIDANCE - LOOSE CARGO TESTING INCLUDING BOUNCE
BS 2011-2.1EE(1988) : 1988 AMD 7828	ENVIRONMENTAL TESTING - TESTS - TEST Ee. BOUNCE
BS ISO 18649:2004	Mechanical vibration. Evaluation of measurement results from dynamic tests and investigations on bridges
BS ISO 1925:2001	MECHANICAL VIBRATION - BALANCING - VOCABULARY
ISO 18649:2004	Mechanical vibration Evaluation of measurement results from dynamic tests and investigations on bridges
ISO 14661:2000	Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements
ISO 2954:2012	Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity
ISO 18738-1:2012	Measurement of ride quality Part 1: Lifts (elevators)
ISO 10068:2012	Mechanical vibration and shock — Mechanical impedance of the human hand-arm system at the driving point
BS ISO 10816-3 : 2009	MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 3: INDUSTRIAL MACHINES WITH NOMINAL POWER ABOVE 15 KW AND NOMINAL SPEEDS BETWEEN 120 R/MIN AND 15000 R/MIN WHEN MEASURED IN SITU
CSA ISO 10819 : 2016	MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND
I.S. EN 60068-2-64:2008	ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE
BS ISO 18437-3 : 2005	MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 3: CANTILEVER SHEAR BEAM METHOD
I.S. TS 15694:2004	MECHANICAL VIBRATION AND SHOCK - MEASUREMENT AND EVALUATION OF SINGLE SHOCKS TRANSMITTED FROM HAND-HELD AND HAND-GUIDED MACHINES TO THE HAND-ARM SYSTEM
SAE J 2834 : 2013(R2019)	RIDE INDEX STRUCTURE AND DEVELOPMENT METHODOLOGY
BS ISO 18437-2 : 2005	MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 2: RESONANCE METHOD
BS EN 15461 : 2008	RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS
BIS IS/ISO 8568 : 2007	MECHANICAL SHOCK - TESTING MACHINES - CHARACTERISTICS AND PERFORMANCE
ISO 8608:2016	Mechanical vibration Road surface profiles Reporting of measured data
BIS IS ISO 4866 : 2010	MECHANICAL VIBRATION AND SHOCK - VIBRATION OF FIXED STRUCTURES - GUIDELINES FOR THE MEASUREMENT OF VIBRATIONS AND EVALUATION OF THEIR EFFECTS ON STRUCTURES
ISO 13373-9:2017	Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 9: Diagnostic techniques for electric motors
ISO 18431-1:2005	Mechanical vibration and shock Signal processing Part 1: General introduction
PREN ISO 10819 : DRAFT 2011	MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - METHOD FOR THE MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND (ISO/DIS 10819:2011)
ANSI/ASA S2.31:1979 (R2014)	METHODS FOR THE EXPERIMENTAL DETERMINATION OF MECHANICAL MOBILITY - PART 1: BASIC DEFINITIONS AND TRANSDUCERS
BS EN ISO 10326-1:2016	Mechanical vibration. Laboratory method for evaluating vehicle seat vibration Basic requirements
UNE-EN ISO 10326-1:2017	Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:2016, Corrected version 2017-02)
ANSI S2.27 : 2002 : R2014	GUIDELINES FOR THE MEASUREMENT AND EVALUATION OF VIBRATION OF SHIP PROPULSION MACHINERY
ABMA ISO 15242-4 : 2012	ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 4: RADIAL CYLINDRICAL ROLLER BEARINGS WITH CYLINDRICAL BORE AND OUTSIDE SURFACE
UNI ISO 29821-1 : 2011	CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - ULTRASOUND - PART 1: GENERAL GUIDELINES
ISO 13373-3:2015	Condition monitoring and diagnostics of machines Vibration condition monitoring Part 3: Guidelines for vibration diagnosis
ISO 20806:2009	Mechanical vibration Criteria and safeguards for the in-situ balancing of medium and large rotors
IEC TS 62271-210:2013	High-voltage switchgear and controlgear - Part 210: Seismic qualification for metal enclosed and solid-insulation enclosed switchgear and controlgear assemblies for rated voltages above 1 kV and up to and including 52 kV
ISO 4868:1984	Code for the measurement and reporting of local vibration data of ship structures and equipment
DIN EN 13059:2009-06	SAFETY OF INDUSTRIAL TRUCKS - TEST METHODS FOR MEASURING VIBRATION
DIN EN 1915-3:2009-06	AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 3: VIBRATION MEASUREMENT METHODS AND REDUCTION
DIN ISO 15242-1:2014-06	ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 1: FUNDAMENTALS (ISO 15242-1:2004)
ISO/TS 15694:2004	Mechanical vibration and shock — Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system
ISO 15242-1:2015	Rolling bearings Measuring methods for vibration Part 1: Fundamentals
ISO 10846-3:2002	Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
IEC 60034-14:2003+AMD1:2007 CSV	Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity
BS ISO 14837-1:2005	MECHANICAL VIBRATION - GROUND-BORNE NOISE AND VIBRATION ARISING FROM RAIL SYSTEMS - PART 1: GENERAL GUIDANCE
BS EN 15433-2:2007	Transportation loads. Measurement and evaluation of dynamic mechanical loads Data acquisition and general requirements for measuring equipment
IEC 61163-1:2006	Reliability stress screening - Part 1: Repairable assemblies manufactured in lots
I.S. EN ISO 20643:2008	MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION (ISO 20643:2005)
I.S. EN ISO 10846-1:2008	ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 1: PRINCIPLES AND GUIDELINES
DIN ISO 19499:2008-03	MECHANICAL VIBRATION - BALANCING - GUIDANCE ON THE USE AND APPLICATION OF BALANCING STANDARDS
I.S. EN 13861:2011	SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
I.S. EN ISO 10846-2:2008	ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION
I.S. EN 1915-3:2004	AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 3: VIBRATION MEASUREMENT METHODS AND REDUCTION
I.S. EN 13059:2002	SAFETY OF INDUSTRIAL TRUCKS - TEST METHODS FOR MEASURING VIBRATION
I.S. EN 12786:2013	SAFETY OF MACHINERY - REQUIREMENTS FOR THE DRAFTING OF THE VIBRATION CLAUSES OF SAFETY STANDARD
DIN EN ISO 10819:2013-12	MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND (ISO 10819:2013)
I.S. EN ISO 13753:2008	MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - METHOD FOR MEASURING THE VIBRATION TRANSMISSIBILITY OF RESILIENT MATERIALS WHEN LOADED BY THE HAND-ARM SYSTEM
I.S. EN 1032:2003	MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE
I.S. EN 1299:1997	MECHANICAL VIBRATION AND SHOCK - VIBRATION ISOLATION OF MACHINES - INFORMATION FOR THE APPLICATION OF SOURCE ISOLATION
VDI 3832:2013-04	MEASUREMENT OF STRUCTURE-BORNE SOUND OF ROLLING ELEMENT BEARINGS IN MACHINES AND PLANTS FOR EVALUATION OF CONDITION
NBR IEC 60068-2-75 : 2007	ENVIRONMENTAL TESTING - PART 2: TESTS - TEST EH: HAMMER TEST
BS 848-6(2003) : 2003	FANS FOR GENERAL PURPOSES - METHOD OF MEASUREMENT OF FAN VIBRATION
UNE-ISO/TR 230-8:2012	Test code for machine tools -- Part 8: Vibrations
DIN ISO 10816-8 E : 2014	MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 8: RECIPROCATING COMPRESSOR SYSTEMS (ISO 10816-8:2014)
BS EN 62047-1:2016	Semiconductor devices. Micro-electromechanical devices Terms and definitions
BS ISO 20806:2009	Mechanical vibration. Criteria and safeguards for the in-situ balancing of medium and large rotors
BS 7854-1(1996) : 1996	MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - GENERAL GUIDELINES
DKD-R 3-1-3 : 2003	KALIBRIERUNG VON BESCHLEUNIGUNGSMESSGERAETEN NACH DEM VERGLEICHSVERFAHREN - TEIL 3: SINUS- UND MULTISINUS-ANREGUNG
UNI ISO 11342 : 2010	MECHANICAL VIBRATION - METHODS AND CRITERIA FOR THE MECHANICAL BALANCING OF FLEXIBLE ROTORS
BS ISO 20154:2017	Ships and marine technology. Guidelines on vibration isolation design methods for shipboard auxiliary machinery
04/30116654 DC : DRAFT JUL 2004	ISO 18431-1 - MECHANICAL VIBRATION AND SHOCK - SIGNAL PROCESSING - PART 1: GENERAL INTRODUCTION
16/30341590 DC : 0	BS ISO 7919-4 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
12/30255973 DC : 0	BS ISO 18431-3 - MECHANICAL VIBRATION AND SHOCK - SIGNAL PROCESSING - PART 3: METHODS OF TIME-FREQUENCY AND TIME-SCALE ANALYSIS
DIN ISO 10816-21:2015-08	MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 21: HORIZONTAL AXIS WIND TURBINES WITH GEARBOX (ISO 10816-21:2015)
I.S. EN ISO 5349-1:2002	MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS
BS ISO 10068:2012	Mechanical vibration and shock. Mechanical impedance of the human hand-arm system at the driving point
14/30299946 DC : 0	BS ISO 8727:1997/AMD 1 - MECHANICAL VIBRATION AND SHOCK - HUMAN EXPOSURE - BIODYNAMIC COORDINATE SYSTEMS
UNI ISO 13380 : 2010	CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES ON USING PERFORMANCE PARAMETERS
BS IEC 60747-14-4:2011	Semiconductor devices. Discrete devices Semiconductor accelerometers
BS ISO 8568:2007	MECHANICAL SHOCK - TESTING MACHINES - CHARACTERISTICS AND PERFORMANCE
BS ISO 18437-4:2008	Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Dynamic stiffness method
BS EN 60068-2-62:1996	ENVIRONMENTAL TESTING - TEST METHODS - TEST Ef. IMPACT, PENDULUM HAMMER
16/30342178 DC : 0	BS ISO 15242-3 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 3: RADIAL SPHERICAL AND TAPERED ROLLER BEARINGS WITH CYLINDRICAL BORE AND OUTSIDE SURFACE
BS ISO 18431-1:2005	MECHANICAL VIBRATION AND SHOCK - SIGNAL PROCESSING - PART 1: GENERAL INTRODUCTION
16/30319144 DC : 0	BS ISO 20283-5 - MECHANICAL VIBRATION - MEASUREMENT OF VIBRATION ON SHIPS - PART 5: GUIDELINES FOR MEASUREMENT, EVALUATION AND REPORTING OF VIBRATION WITH REGARD TO HABITABILITY ON PASSENGER AND MERCHANT SHIPS
BIS IS/ISO 20283-2 : 2008	MECHANICAL VIBRATION - MEASUREMENT OF VIBRATION ON SHIPS - PART 2: MEASUREMENT OF STRUCTURAL VIBRATION
BS ISO 7919-2:2009	MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN
BS ISO 20816-2:2017	Mechanical vibration. Measurement and evaluation of machine vibration Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
14/30313008 DC : 0	BS ISO 16063-43 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 43: CALIBRATION OF ACCELEROMETERS BY MODEL-BASED PARAMETER IDENTIFICATION
BS EN 60068-2-6:2008	ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL)
DIN ISO 17359:2011-09	CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES
NF EN 60068 5-2 : 2000	ENVIRONMENTAL TESTING - PART 5: GUIDE TO DRAFTING OF TEST METHODS - TERMS AND DEFINITIONS
NF ISO 13091-1 : 2003 AMD 1 2010	MECHANICAL VIBRATION - VIBROTACTILE PERCEPTION THRESHOLDS FOR THE ASSESSMENT OF NERVE DYSFUNCTION - PART 1: METHOD OF MEASUREMENT AT THE FINGERTIPS
BS ISO 22266-1:2009	Mechanical vibration. Torsional vibration of rotating machinery Land-based steam and gas turbine generator sets in excess of 50 MW
ANSI/ASA S1.1:2013	ACOUSTICAL TERMINOLOGY
BS ISO 10816-21:2015 (published 2015-05)	Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts Horizontal axis wind turbines with gearbox
BS ISO 18312-1:2012	Mechanical vibration and shock. Measurement of vibration power flow from machines into connected support structures Direct method
09/30192807 DC : DRAFT FEB 2009	BS ISO 7919-2 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN
ISO 13091-2:2003	Mechanical vibration Vibrotactile perception thresholds for the assessment of nerve dysfunction Part 2: Analysis and interpretation of measurements at the fingertips
10/30200372 DC : 0	BS ISO 17359 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES
BS AU228-1B(2002) : 2002	IMPACT TESTS ON ROAD VEHICLES - PART 1B: SPECIFICATION FOR MEASUREMENT TECHNIQUES AND GENERAL INSTRUMENTATION
DIN ISO 21940-2 E : 2017	MECHANICAL VIBRATION - ROTOR BALANCING - PART 2: VOCABULARY (ISO 21940-2:2017)
10/30215731 DC : 0	BS ISO 21940-23 - MECHANICAL VIBRATION - ROTOR BALANCING - PART 23: BALANCING MACHINES - ENCLOSURES AND OTHER PROTECTIVE MEASURES FOR THE MEASURING STATION
DIN ISO 1940-1:2004-04	MECHANICAL VIBRATION - BALANCE QUALITY REQUIREMENTS FOR ROTORS IN A CONSTANT (RIGID) STATE - PART 1: SPECIFICATION AND VERIFICATION OF BALANCE TOLERANCES
ISO 18431-2:2004	Mechanical vibration and shock Signal processing Part 2: Time domain windows for Fourier Transform analysis
PD ISO/TR 19201:2013	MECHANICAL VIBRATION - METHODOLOGY FOR SELECTING APPROPRIATE MACHINERY VIBRATION STANDARDS
BS ISO 13091-1:2001	MECHANICAL VIBRATION - VIBROTACTILE PERCEPTION THRESHOLDS FOR THE ASSESSMENT OF NERVE DYSFUNCTION - PART 1: METHODS OF MEASUREMENT AT THE FINGERTIPS
BS ISO 4866:2010	Mechanical vibration and shock. Vibration of fixed structures. Guidelines for the measurement of vibrations and evaluation of their effects on structures
ANSI S2.60 : 0	BALANCING MACHINES - ENCLOSURES AND OTHER SAFETY MEASURES
BS ISO 29821-1:2011	CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - ULTRASOUND - PART 1: GENERAL GUIDELINES
ISO/TR 230-8:2010	Test code for machine tools Part 8: Vibrations
ANSI S2.7 : 0	BALANCING TERMINOLOGY
17/30341578 DC : DRAFT MAY 2017	BS ISO 17359 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES
BS 6955-0:1988	CALIBRATION OF VIBRATION AND SHOCK PICK-UPS - GUIDE TO BASIC PRINCIPLES
11/30237779 DC : DRAFT MAR 2011	BS ISO 18437-1 - MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 1: PRINCIPLES AND GUIDELINES
14/30265061 DC : 0	BS ISO 10816-21 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 21: HORIZONTAL AXIS WIND TURBINES WITH GEARBOX
DIN ISO 18436-2:2014-11	CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 2: VIBRATION CONDITION MONITORING AND DIAGNOSTICS (ISO 18436-2:2014)
BS ISO 18431-2:2004	MECHANICAL VIBRATION AND SHOCK - SIGNAL PROCESSING - PART 2: TIME DOMAIN WINDOWS FOR FOURIER TRANSFORM ANALYSIS
05/30137514 DC : DRAFT AUG 2005	IEC 60747-14-4 - DISCRETE SEMICONDUCTOR DEVICES - PART 14-4: SEMICONDUCTOR ACCELEROMETERS
BS ISO 21940-2:2017	Mechanical vibration. Rotor balancing Vocabulary
BS ISO 15242-4:2017	Rolling bearings. Measuring methods for vibration Radial cylindrical roller bearings with cylindrical bore and outside surface
BS ISO 13373-2:2016	Condition monitoring and diagnostics of machines. Vibration condition monitoring Processing, analysis and presentation of vibration data
09/30211740 DC : 0	BS EN 62271-210 ED1 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 210: SEISMIC QUALIFICATION FOR METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV
BS PD ISO/TR 19664 : 2017	HUMAN RESPONSE TO VIBRATION - GUIDANCE AND TERMINOLOGY FOR INSTRUMENTATION AND EQUIPMENT FOR THE ASSESSMENT OF DAILY VIBRATION EXPOSURE AT THE WORKPLACE ACCORDING TO THE REQUIREMENTS OF HEALTH AND SAFETY
16/30341489 DC : 0	BS ISO 16063-44 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 44: CALIBRATION OF FIELD VIBRATION CALIBRATORS
BS ISO 14661:2000	THERMAL TURBINES FOR INDUSTRIAL APPLICATIONS (STEAM TURBINES, GAS EXPANSION TURBINES) - GENERAL REQUIREMENTS
UNI ISO 2631-1 : 2014	MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS
BS ISO 20283-4 : 2012	MECHANICAL VIBRATION - MEASUREMENT OF VIBRATION ON SHIPS - PART 4: MEASUREMENT AND EVALUATION OF VIBRATION OF THE SHIP PROPULSION MACHINERY
SAE J ISO 7096 : FEB 2003	EARTH-MOVING MACHINERY - LABORATORY EVALUATION OF OPERATOR SET VIBRATION
PD ISO/TR 18570:2017	Mechanical vibration. Measurement and evaluation of human exposure to hand transmitted vibration. Supplementary method for assessing risk of vascular disorders
BIS IS/ISO 8528-9 : 1995(R2014)	RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 9: MEASUREMENT AND EVALUATION OF MECHANICAL VIBRATIONS
BS EN 60721-1:1996	Classification of environmental conditions Environmental parameters and their severities
ISO 7919-2:2009	Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
DIN EN ISO 10846-5:2009-07	ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION
ISO 7475:2002	Mechanical vibration Balancing machines Enclosures and other protective measures for the measuring station
ISO 18431-4:2007	Mechanical vibration and shock Signal processing Part 4: Shock-response spectrum analysis
ISO 2017-3:2015	Mechanical vibration and shock — Resilient mounting systems — Part 3: Technical information to be exchanged for application of vibration isolation to new buildings
ANSI S2.62 : 2009 : R2014	American National Standard Shock Test Requirements for Equipment in a Rugged Shock Environment
BS 6294(1982) : 1982	METHOD FOR MEASUREMENT OF BODY VIBRATION TRANSMITTED TO THE OPERATOR OF EARTH MOVING MACHINERY
PREN 12786 : DRAFT 2012	SAFETY OF MACHINERY - RULES FOR THE DRAFTING OF THE VIBRATION CLAUSES OF SAFETY STANDARDS
ISO 15242-4:2017	Rolling bearings — Measuring methods for vibration — Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface
CEI EN 61300-2-9 : 2012	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-9: TESTS - SHOCK
I.S. EN 62047-1:2016	SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 1: TERMS AND DEFINITIONS
ANSI S2.72 PT1 : 2002	MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS
I.S. EN 60068-2-65:2013	ENVIRONMENTAL TESTING - PART 2-65: TESTS - TEST FG: VIBRATION - ACOUSTICALLY INDUCED METHOD (IEC 60068-2-65:2013 (EQV))
NF ISO 14695 : 2003	INDUSTRIAL FANS - METHOD OF MEASUREMENT OF FAN VIBRATION
I.S. EN 60068-2-75:2014	ENVIRONMENTAL TESTING - PART 2-75: TESTS - TEST EH: HAMMER TESTS
UNI ISO 18436-2 : 2014	CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 2: VIBRATION CONDITION MONITORING AND DIAGNOSTICS
NF ISO 7626-1 : 2011	MECHANICAL VIBRATION AND SHOCK - EXPERIMENTAL DETERMINATION OF MECHANICAL MOBILITY - PART 1: BASIC TERMS AND DEFINITIONS, AND TRANSDUCER SPECIFICATIONS
I.S. EN 60068-2-80:2005	ENVIRONMENTAL TESTING - PART 2-80: TESTS - TEST FI: VIBRATION - MIXED MODE
ISO 16063-22:2005	Methods for the calibration of vibration and shock transducers Part 22: Shock calibration by comparison to a reference transducer
ISO/TR 18570:2017	Mechanical vibration Measurement and evaluation of human exposure to hand transmitted vibration Supplementary method for assessing risk of vascular disorders
UNE-ISO 5805:2017	Mechanical vibration and shock -- Human exposure – Vocabulary.
ANSI/ASA S2.8 : 2007 : INC : ERR 1 : 2013 : R2017	TECHNICAL INFORMATION USED FOR RESILIENT MOUNTING APPLICATIONS
DIN EN ISO 10326-1:2015-09 (Draft)	MECHANICAL VIBRATION - LABORATORY METHOD FOR EVALUATING VEHICLE SEAT VIBRATION - PART 1: BASIC REQUIREMENTS (ISO 10326-1:2016)
I.S. EN ISO 10846-5:2009	ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION
I.S. EN ISO 10819:2013	MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND (ISO 10819:2013)
DIN ISO 15242-3:2014-06	ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 3: RADIAL SPHERICAL AND TAPERED ROLLER BEARINGS WITH CYLINDRICAL BORE AND OUTSIDE SURFACE (ISO 15242-3:2006 + COR. 1:2010)
CEI EN 60068-2-27 : 2012	ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK
ISO 18437-4:2008	Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 4: Dynamic stiffness method
ANSI S2.27 : 2002 : R2007	GUIDELINES FOR THE MEASUREMENT AND EVALUATION OF VIBRATION OF SHIP PROPULSION MACHINERY
NF EN 60068 2-6 : 2008	ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL)
UNI 11389-1 : 2011	VIBRATIONS - BEHAVIOUR ASSESSMENT OF THE STATIC AND DYNAMIC OF RAILWAY AND TRAMWAY TRACK SYSTEM GENERAL - PART 1: DEFINITIONS DATA
ISO 10819:2013	Mechanical vibration and shock — Hand-arm vibration — Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
ISO 7919-3:2009	Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 3: Coupled industrial machines
IEC 60068-3-8:2003	Environmental testing - Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests
ISO 20283-4:2012	Mechanical vibration — Measurement of vibration on ships — Part 4: Measurement and evaluation of vibration of the ship propulsion machinery
ISO 5008:2002	Agricultural wheeled tractors and field machinery Measurement of whole-body vibration of the operator
ISO 10326-2:2001	Mechanical vibration Laboratory method for evaluating vehicle seat vibration Part 2: Application to railway vehicles
IEC 60747-14-4:2011	Semiconductor devices - Discrete devices - Part 14-4: Semiconductor accelerometers
IEC 60068-2-27:2008	Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
I.S. EN 60068-2-62:1996	ENVIRONMENTAL TESTING - PART 2: TEST METHODS TEST EF: IMPACT, PENDULUM HAMMER
ISO 2017-1:2005	Mechanical vibration and shock Resilient mounting systems Part 1: Technical information to be exchanged for the application of isolation systems
DIN EN 12786:2013-05	SAFETY OF MACHINERY - REQUIREMENTS FOR THE DRAFTING OF THE VIBRATION CLAUSES OF SAFETY STANDARDS
DIN EN ISO 5349-1:2001-12	MECHANICAL VIBRATIONS - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS
DIN EN ISO 20643 E : 2012	MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION (ISO 20643:2005 + AMD 1:2012)
DIN EN ISO 5349-2:2015-12	MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE (ISO 5349-2:2001 + AMD 1:2015)
DIN EN 1032:2009-02	MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE
DIN EN 13861:2012-01	Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
DIN EN ISO 13753:2008-09	MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - METHOD FOR MEASURING THE VIBRATION TRANSMISSIBILITY OF RESILIENT MATERIALS WHEN LOADED BY THE HAND-ARM SYSTEM
DIN EN ISO 10846-1:2008-11	ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 1: PRINCIPLES AND GUIDELINES
BS EN 30326-1 : 1994	MECHANICAL VIBRATION - LABORATORY METHOD FOR EVALUATING VEHICLE SEAT VIBRATION - PART 1: BASIC REQUIREMENTS
IEC 60068-2-75:2014	Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
BS EN ISO 7096:2008	Earth-moving machinery. Laboratory evaluation of operator seat vibration
ISO 14837-1:2005	Mechanical vibration Ground-borne noise and vibration arising from rail systems Part 1: General guidance
ISO 5805:1997	Mechanical vibration and shock Human exposure Vocabulary
ISO 5349-2:2001	Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace
IEC 60068-2-65:2013	Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method
BS EN ISO 5349-1:2001	MECHANICAL VIBRATION - MEASUREMENT AND ASSESSMENT OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - GENERAL REQUIREMENTS
ISO 10846-2:2008	Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
CEI EN 60068-2-64 : 2012	ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE
UNI EN ISO 10846-5 : 2009	ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION
UNI EN 13059 : 2008	SAFETY OF INDUSTRIAL TRUCKS - TEST METHODS FOR MEASURING VIBRATION
UNI EN ISO 10846-1 : 2008	ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 1: PRINCIPLES AND GUIDELINES
UNI EN ISO 8041 : 2005	HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION
UNI EN ISO 10819 : 2013	MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND
UNI EN 1299 : 2009	MECHANICAL VIBRATION AND SHOCK - VIBRATION ISOLATION OF MACHINES - INFORMATION FOR THE APPLICATION OF SOURCE ISOLATION
UNI EN 13861 : 2011	SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
UNI EN ISO 5349-1 : 2004	MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS
UNI EN ISO 10846-2 : 2008	ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION
UNI EN 12786 : 2013	SAFETY OF MACHINERY - REQUIREMENTS FOR THE DRAFTING OF THE VIBRATION CLAUSES OF SAFETY STANDARDS
UNI EN 30326-1 : 2012	MECHANICAL VIBRATION - LABORATORY METHOD FOR EVALUATING VEHICLE SEAT VIBRATION - PART 1: BASIC REQUIREMENTS
UNI EN ISO 20643 : 2012	MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION
UNI EN 1915-3 : 2012	AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 3: VIBRATION MEASUREMENT METHODS AND REDUCTION
UNI EN 15433-2 : 2008	TRANSPORTATION LOADS - MEASUREMENT AND EVALUATION OF DYNAMIC MECHANICAL LOADS - PART 2: DATA ACQUISITION AND GENERAL REQUIREMENTS FOR MEASURING EQUIPMENT
EN 1299:1997+A1:2008	Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation
UNI EN ISO 13753 : 2008	MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - METHOD FOR MEASURING THE VIBRATION TRANSMISSIBILITY OF RESILIENT MATERIALS WHEN LOADED BY THE HAND-ARM SYSTEM
UNI EN 1032 : 2009	MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE
UNI ISO 14837-1 : 2013	MECHANICAL VIBRATION - GROUND-BORNE NOISE AND VIBRATION ARISING FROM RAIL SYSTEMS - PART 1: GENERAL GUIDANCE
UNI ISO 13379 : 2010	CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES ON DATA INTERPRETATION AND DIAGNOSTICS TECHNIQUES
ISO/TR 19664:2017	Human response to vibration Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety
ISO 16063-15:2006	Methods for the calibration of vibration and shock transducers Part 15: Primary angular vibration calibration by laser interferometry
BS ISO 5805:1997	MECHANICAL VIBRATION AND SHOCK - HUMAN EXPOSURE - VOCABULARY
UNE-EN 60068-2-27:2011	Environmental testing -- Part 2-27: Tests - Test Ea and guidance: Shock
01/710913 DC : DRAFT JULY 2001	ISO/DIS 15242-1 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 1: FUNDAMENTALS
ISO 15242-3:2017	Rolling bearings — Measuring methods for vibration — Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface
ISO 2631-5:2004	Mechanical vibration and shock Evaluation of human exposure to whole-body vibration Part 5: Method for evaluation of vibration containing multiple shocks
00/702358 DC : DRAFT JAN 2000	ISO/DIS 13380 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - USE OF PERFORMANCE PARAMETERS - GENERAL GUIDELINES
BS EN ISO 10846-5:2009	Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
03/306100 DC : DRAFT APR 2003	ISO 18437-3 - MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF RESILIENT MATERIALS - PART 3: SINGLE CANTILEVER BEAM METHOD
DIN ISO 21940-12:2016-09	MECHANICAL VIBRATION - ROTOR BALANCING - PART 12: PROCEDURES AND TOLERANCES FOR ROTORS WITH FLEXIBLE BEHAVIOUR (ISO 21940-12:2016)
CSA ISO 5349-1 : 2016	MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS
ANSI/ASA S2.32 : 1982(R2014)	METHODS FOR THE EXPERIMENTAL DETERMINATION OF MECHANICAL MOBILITY - PART 2: MEASUREMENTS USING SINGLE-POINT TRANSLATION EXCITATION
ISO 16063-45:2017	Methods for the calibration of vibration and shock transducers — Part 45: In-situ calibration of transducers with built in calibration coil
ANSI S2.70 : 2006(R2016)	GUIDE FOR THE MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO VIBRATION TRANSMITTED TO THE HAND
NFE 90 401-2 : 2001	MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 2: GENERAL REQUIREMENTS
NF EN 15461 : 2008 + A1 2011	RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS
I.S. EN ISO 5199:2002	TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 2
15/30322612 DC : 0	BS ISO 16063-17 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 17: PRIMARY CALIBRATION BY CENTRIFUGE
CEI EN 60068-2-55 : 2014	ENVIRONMENTAL TESTING - PART 2-55: TESTS - TEST EE AND GUIDANCE: LOOSE CARGO TESTING INCLUDING BOUNCE
15/30311781 DC : 0	BS ISO 21940-12 - MECHANICAL VIBRATION - ROTOR BALANCING - PART 12: PROCEDURES AND TOLERANCES FOR ROTORS WITH FLEXIBLE BEHAVIOUR
BS ISO 18437-5:2011	Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Poisson ratio based on comparison between measurements and finite element analysis
DIN ISO 16063-16:2015-11	METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 16: CALIBRATION BY EARTH'S GRAVITATION (ISO 16063-16:2014)
ISO 16063-32:2016	Methods for the calibration of vibration and shock transducers Part 32: Resonance testing Testing the frequency and the phase response of accelerometers by means of shock excitation
09/30197819 DC : 0	BS ISO 2631-1/AMD1 - MECHANICAL VIBRATION - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS
05/30138371 DC : DRAFT AUG 2005	IEC 60068-2-27 ED 4 - BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2-27: TESTS - TEST EA AND GUIDANCE - SHOCK AND BUMP
17/30317136 DC : 0	BS ISO 20154 - SHIPS AND MARINE TECHNOLOGY - GUIDELINES ON VIBRATION ISOLATION DESIGN METHOD FOR SHIPBOARD AUXILIARY MACHINERY
UNI ISO 7919-4 : 2010	MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
16/30348139 DC : 0	BS EN ISO 80000-4 - QUANTITIES AND UNITS - PART 4: MECHANICS
BS ISO 10817-1:1999	ROTATING SHAFT VIBRATION MEASURING SYSTEMS - RELATIVE AND ABSOLUTE SENSING OF RADIAL VIBRATION
BS ISO 10813-1:2004	Vibration generating machines. Guidance for selection Equipment for environmental testing
I.S. EN ISO 8041:2005	HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION
BS EN ISO 1683:2015	Acoustics. Preferred reference values for acoustical and vibratory levels
16/30337263 DC : 0	BS ISO 20816-2 - MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF MACHINE VIBRATION - PART 2: LAND-BASED GAS TURBINES, STEAM TURBINES AND GENERATORS IN EXCESS OF 40 MW, WITH FLUID-FILM BEARINGS
BS 848-7(2003) : 2003	FANS FOR GENERAL PURPOSES - PART 7: SPECIFICATIONS FOR BALANCING AND VIBRATION
02/708964 DC : DRAFT JULY 2002	ISO/DIS 10813-1 - VIBRATION-GENERATING MACHINES - GUIDANCE FOR SELECTION - PART 1: EQUIPMENT FOR ENVIRONMENTAL TESTING
03/305847 DC : DRAFT APR 2003	ISO 18437-2 - MECHANICAL VIBRATION AND SHOCK - CHARACTERISATION OF THE DYNAMIC MECHANICAL PROPERTIES OF RESILIENT MATERIALS - PART 2: RESONANCE METHOD
10/30218266 DC : 0	BS ISO 13372 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VOCABULARY
BS AU 228-1a:2000	IMPACT TESTS ON ROAD VEHICLES - PART 1A: SPECIFICATION FOR MEASUREMENT TECHNIQUES AND GENERAL INSTRUMENTATION
I.S. EN ISO 1683:2015	ACOUSTICS - PREFERRED REFERENCE VALUES FOR ACOUSTICAL AND VIBRATORY LEVELS (ISO 1683:2015)
17/30312195 DC : 0	BS ISO 2631-5 - MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 5: METHOD FOR EVALUATION OF VIBRATION CONTAINING MULTIPLE SHOCKS
ISO 15261:2004	Vibration and shock generating systems Vocabulary
ISO 29821:2018	Condition monitoring and diagnostics of machines — Ultrasound — General guidelines, procedures and validation
CEI EN 60255-21-3 : 1998	ELECTRICAL RELAYS - PART 21: VIBRATION, SHOCK, BUMP AND SEISMIC TESTS ON MEASURING RELAYS AND PROTECTION EQUIPMENT - SECTION 3: SEISMIC TESTS
BS ISO 13373-1:2002	Condition monitoring and diagnostics of machines. Vibration condition monitoring General procedures
ISO 19499:2007	Mechanical vibration Balancing Guidance on the use and application of balancing standards
BS EN 61163-1:2006	RELIABILITY STRESS SCREENING - PART 1: REPAIRABLE ASSEMBLIES MANUFACTURED IN LOTS
PD IEC/TS 61463:2016	Bushings. Seismic qualification
13/30268568 DC : 0	BS ISO 16063-42 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 42: CALIBRATION OF SEISMOMETERS WITH HIGH ACCURACY USING ACCELERATION OF GRAVITY
ISO 8626:1989	Servo-hydraulic test equipment for generating vibration Method of describing characteristics
14/30295943 DC : 0	BS ISO 6487 - ROAD VEHICLES - MEASUREMENT TECHNIQUES IN IMPACT TESTS - INSTRUMENTATION
IEC TS 61463:2016	Bushings - Seismic qualification
BS EN 60068-3-8:2003 (published 2004-02)	Environmental testing Supporting documentation and guidance - Selecting amongst vibration tests
ISO 14839-1:2002	Mechanical vibration Vibration of rotating machinery equipped with active magnetic bearings Part 1: Vocabulary
DIN EN ISO 10326-1 E : 2017	MECHANICAL VIBRATION - LABORATORY METHOD FOR EVALUATING VEHICLE SEAT VIBRATION - PART 1: BASIC REQUIREMENTS (ISO 10326-1:2016)
BS EN ISO 8041-1:2017	Human response to vibration. Measuring instrumentation General purpose vibration meters
DIN ISO 15242-2:2014-06	ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 2: RADIAL BALL BEARINGS WITH CYLINDRICAL BORE AND OUTSIDE SURFACE (ISO 15242-2:2004 + COR. 1:2010)
BIS IS 14884 : 2000 AMD 2 2007	MECHANICAL VIBRATION AND SHOCK - VIBRATION OF BUILDINGS - GUIDELINES FOR THE MEASUREMENT OF VIBRATIONS AND EVALUATION OF THEIR EFFECTS ON BUILDINGS
DIN ISO 21940-2:2017-09	MECHANICAL VIBRATION - ROTOR BALANCING - PART 2: VOCABULARY (ISO 21940-2:2017)
04/302070 DC : DRAFT JAN 2004	BS ISO 13373-2 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VIBRATION CONDITION MONITORING - PART 2: PROCESSING, PRESENTATION AND ANALYSIS OF VIBRATION DATA
BS ISO 13373-3:2015	Condition monitoring and diagnostics of machines. Vibration condition monitoring Guidelines for vibration diagnosis
01/708611 DC : DRAFT MAY 2001	ISO/DIS 13091-2 - MECHANICAL VIBRATION - VIBROTACTILE PERCEPTION THRESHOLDS FOR THE ASSESSMENT OF NERVE DYSFUNCTION - PART 2: ANALYSIS AND INTERPRETATION OF MEASUREMENTS AT THE FINGERTIPS
00/713944 DC : DRAFT SEP 2000	ISO/DIS 14695 - INDUSTRIAL FANS - METHOD OF MEASUREMENT OF FAN VIBRATION
02/706469 DC : DRAFT MAY 2002	PREN ISO 20643 - HAND-TRANSMITTED VIBRATION FROM HAND-HELD OR HAND-GUIDED MACHINERY - MEASUREMENT OF VIBRATION AT THE GRIP SURFACE
10/30219217 DC : 0	BS ISO 6487 - ROAD VEHICLES - MEASUREMENT TECHNIQUES IN IMPACT TESTS - INSTRUMENTATION
16/30341596 DC : 0	BS ISO 10816-4 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
ISO 16063-41:2011	Methods for the calibration of vibration and shock transducers Part 41: Calibration of laser vibrometers
BS EN 60068-2-75:2014	Environmental testing Tests. Test Eh: Hammer tests
05/30127567 DC : DRAFT JAN 2005	ISO 20283-3 - MECHANICAL VIBRATION - MEASUREMENT OF VIBRATION ON SHIPS - PART 3: PRE-INSTALLATION VIBRATORY NOISE MEASUREMENT OF SHIPBOARD EQUIPMENT
BS 2011-2.1EF(1992) : 1992	ENVIRONMENTAL TESTING - TESTS - IMPACT, PENDULUM HAMMER
BS 6897-2:1990	METHOD FOR EXPERIMENTAL DETERMINATION OF MECHANICAL MOBILITY - PART 2: MEASUREMENTS USING SINGLE-POINT TRANSLATION EXCITATION WITH AN ATTACHED VIBRATION EXCITER
DIN 70003:1993-08	VIBRATIONAL STRESS - MEASUREMENT OF PARAMETERS ON VEHICLE PARTS
16/30297787 DC : 0	BS ISO 16079-1 - CONDITION MONITORING AND DIAGNOSTICS OF WIND TURBINES - PART 1: GENERAL GUIDELINES
BS ISO 5348:1998	MECHANICAL VIBRATION AND SHOCK - MECHANICAL MOUNTING OF ACCELEROMETERS
10/30216308 DC : 0	BS EN 60068-2-57:2000+A1 - ENVIRONMENTAL TESTING - PART 2-57: TEST METHODS - TEST FF: VIBRATION - TIME-HISTORY & SINE-BEAT METHOD
BS ISO 13372:2012	Condition monitoring and diagnostics of machines. Vocabulary
07/30147100 DC : 0	ISO 18437-4 - MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 4: DYNAMIC STIFFNESS METHOD
02/708198 DC : DRAFT JUN 2002	BS ISO 5344 - ELECTRODYNAMIC VIBRATION GENERATING SYSTEMS - PERFORMANCE CHARACTERISTICS
11/30237786 DC : 0	BS ISO 20283-4 - MECHANICAL VIBRATION - MEASUREMENT OF VIBRATION ON SHIPS - PART 4: MEASUREMENT AND EVALUATION OF VIBRATION OF THE SHIP PROPULSION MACHINERY
BS AU 228-1:1989	IMPACT TESTS ON ROAD VEHICLES - SPECIFICATION FOR MEASUREMENT TECHNIQUES AND GENERAL INSTRUMENTATION
ISO 14839-4:2012	Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 4: Technical guidelines
NF EN 60068 2-29 : 1994	BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST EB AND GUIDANCE: BUMP
ANSI S2.8 : 2007 : INC : ERR 1 : 2013 : R201200	TECHNICAL INF