ISO 1119:2011
Current
Current
The latest, up-to-date edition.
Geometrical product specifications (GPS) — Series of conical tapers and taper angles
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English
Published date
05-12-2011
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 1119:2011 provides calculated values for a series of cones or conical tapers, ranging from 120° to less than 1°, or ratios from 1:0,289 to 1:500, intended for general use in technical engineering.
It applies only to plain conical surfaces, and excludes prismatic pieces, taper threads, bevel gears, etc.
| DevelopmentNote |
Supersedes ISO/DIS 1119. (12/2011)
|
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| JIS B 0612:2017 | Identical |
| JIS B 0612:1987 | Identical |
| NF EN ISO 1119 : 2012 | Identical |
| NBN EN ISO 1119 : 2012 | Identical |
| NEN EN ISO 1119 : 2011 | Identical |
| NS EN ISO 1119 : 2011 | Identical |
| I.S. EN ISO 1119:2011 | Identical |
| PN EN ISO 1119 : 2012 | Identical |
| SN EN ISO 1119 : 2012 | Identical |
| UNE-EN ISO 1119:2012 | Identical |
| UNI EN ISO 1119 : 2012 | Identical |
| IS 3458 : 2018 | Identical |
| IS 3708 : Part 8 : 2018 | Identical |
| BS EN ISO 1119:2011 | Identical |
| EN ISO 1119:2011 | Identical |
| DIN EN ISO 1119:2012-04 | Identical |
| NS 1435 : 1ED 1976 | Identical |
| NEN ISO 1119 : 1998 | Identical |
| BIS IS 3458 : 2001 | Identical |
| BS EN ISO 2538-2:2014 | Geometrical product specifications (GPS). Wedges Dimensioning and tolerancing |
| 16/30333241 DC : 0 | BS ISO 20168 - RESISTANCE WELDING - LOCKING TAPERS FOR ELECTRODE HOLDERS AND ELECTRODE CAPS |
| BS EN ISO 3040:2016 | Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones |
| UNE-EN ISO 3040:2016 | Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016) |
| UNE-EN ISO 2538-2:2015 | Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014) |
| UNE-EN ISO 5821:2010 | Resistance welding - Spot welding electrode caps (ISO 5821:2009) |
| DIN EN ISO 2538-2:2015-01 | Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014) |
| BS ISO 13074:2012 | Analogue quartz clocks. Fitting dimensions of movements to hands |
| UNI EN ISO 2538-1 : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES |
| BS ISO 20168:2016 | Resistance welding. Locking tapers for electrode holders and electrode caps |
| DIN ISO 666:2013-12 | MACHINE TOOLS - MOUNTING OF GRINDING WHEELS BY MEANS OF HUB FLANGES (ISO 666:2012) |
| BS EN ISO 2538-1:2014 | Geometrical product specifications (GPS). Wedges Series of angles and slopes |
| 12/30246960 DC : 0 | BS EN ISO 2538-2 - GEOMETRICAL PRODUCT SPECIFICATIONS - WEDGES - PART 2: DIMENSIONING AND TOLERANCING |
| UNE-EN ISO 2538-1:2015 | Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014) |
| UNI EN ISO 2538-2 : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 2: DIMENSIONING AND TOLERANCING |
| DIN EN ISO 2538-1:2015-01 | GEOMETRICAL PRODUCT SPECFICATIONS (GPS) - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES; (ISO 2538-1:2014) |
| 04/30115337 DC : 0 | ISO 666 - MACHINE TOOLS - MOUNTING OF GRINDING WHEELS BY MEANS OF HUB FLANGES |
| ISO 666:2012 | Machine tools — Mounting of grinding wheels by means of hub flanges |
| BS 4500-4:1985 | ISO limits and fits Specification for system of cone (taper) fits for cones from <i>C</i>=1:3 to 1:500, lengths from 6 mm to 630 mm and diameters up to 500 mm |
| DIN 254:2003-04 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES - VALUES FOR SETTING TAPER ANGLES AND SETTING HEIGHTS |
| 12/30246945 DC : 0 | BS EN ISO 2538-1 - GEOMETRICAL PRODUCT SPECIFICATIONS - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES |
| BS ISO 666:2012 | Machine tools. Mounting of grinding wheels by means of hub flanges |
| UNI EN ISO 5821 : 2010 | RESISTANCE WELDING - SPOT WELDING ELECTRODE CAPS |
| BS ISO 492:2014 | Rolling bearings. Radial bearings. Geometrical product specifications (GPS) and tolerance values |
| I.S. EN ISO 2538-2:2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 2: DIMENSIONING AND TOLERANCING (ISO 2538-2:2014) |
| I.S. EN ISO 3040:2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - CONES (ISO 3040:2016) |
| I.S. EN ISO 2538-1:2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES (ISO 2538-1:2014) |
| BIS IS 15299 : 2013 | MACHINE TOOLS - MOUNTING OF PLAIN GRINDING WHEELS BY MEANS OF HUB FLANGES |
| ISO 2538-1:2014 | Geometrical product specifications (GPS) — Wedges — Part 1: Series of angles and slopes |
| ISO 3040:2016 | Geometrical product specifications (GPS) Dimensioning and tolerancing Cones |
| ISO 5821:2009 | Resistance welding — Spot welding electrode caps |
| ISO 2538-2:2014 | Geometrical product specifications (GPS) — Wedges — Part 2: Dimensioning and tolerancing |
| EN ISO 3040:2016 | Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016) |
| EN ISO 2538-1:2014 | Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014) |
| EN ISO 5821:2009 | Resistance welding - Spot welding electrode caps (ISO 5821:2009) |
| EN ISO 2538-2:2014 | Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014) |
| I.S. EN ISO 5821:2009 | RESISTANCE WELDING - SPOT WELDING ELECTRODE CAPS |
| DIN EN ISO 5821:2010-04 | Resistance welding - Spot welding electrode caps (ISO 5821:2009) |
| 11/30196431 DC : 0 | BS ISO 13074 - ANALOGUE QUARTZ CLOCKS - FITTING DIMENSIONS OF MOVEMENTS TO HANDS |
| 07/30166625 DC : 0 | BS ISO 5821 - RESISTANCE SPOT WELDING ELECTRODE CAPS |
| 12/30258651 DC : 0 | BS ISO 492 - ROLLING BEARINGS - RADIAL BEARINGS - DIMENSIONAL AND GEOMETRICAL TOLERANCES |
| BS EN ISO 5821:2009 | Resistance welding. Spot welding electrode caps |
| BS ISO 3040 : 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - CONES |
| ISO 13074:2012 | Analogue quartz clocks — Fitting dimensions of movements to hands |
| ISO 492:2014 | Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values |
| ISO 8489-4:1995 | Textile machinery and accessories — Cones for cross winding — Part 4: Dimensions, tolerances and designation of cones with half angle 4 degrees 20' for winding for dyeing purposes |
| ISO/TR 14638:1995 | Geometrical product specification (GPS) Masterplan |
| ISO 8015:2011 | Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules |
| ISO 5237:1978 | Textile machinery and accessories Cones for yarn winding (cross wound) Half angle of the cone 5 degrees 57' |
| ISO 297:1988 | 7/24 tapers for tool shanks for manual changing |
| ISO 8489-5:1995 | Textile machinery and accessories — Cones for cross winding — Part 5: Dimensions, tolerances and designation of cones with half angle 5 degrees 57' |
| ISO 595-2:1987 | Reusable all-glass or metal-and-glass syringes for medical use Part 2: Design, performance requirements and tests |
| ISO 14253-1:2017 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications |
| ISO 5356-1:2015 | Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets |
| ISO 10651-4:2002 | Lung ventilators — Part 4: Particular requirements for operator-powered resuscitators |
| ISO 3:1973 | Preferred numbers Series of preferred numbers |
| ISO 3040:2016 | Geometrical product specifications (GPS) Dimensioning and tolerancing Cones |
| ISO 8489-3:1995 | Textile machinery and accessories — Cones for cross winding — Part 3: Dimensions, tolerances and designation of cones with half angle 4 degrees 20' |
| ISO 296:1991 | Machine tools — Self-holding tapers for tool shanks |
| ISO 595-1:1986 | Reusable all-glass or metal-and-glass syringes for medical use Part 1: Dimensions |
| ISO 8489-2:1995 | Textile machinery and accessories — Cones for cross winding — Part 2: Dimensions, tolerances and designation of cones with half angle 3 degrees 30' |
| IEC 60095-2:2009 | Lead-acid starter batteries - Part 2: Dimensions of batteries and dimensions and marking of terminals |
| ISO 575:1978 | Textile machinery and accessories Transfer cones Half angle of the cone 4 degrees 20' |
| ISO 324:1978 | Textile machinery and accessories Cones for cross winding for dyeing purposes Half angle of the cone 4 degrees 20' |
| ISO 12164-1:2001 | Hollow taper interface with flange contact surface — Part 1: Shanks — Dimensions |
| ISO 239:1999 | Drill chuck tapers |
| ISO 368:2006 | Spinning preparatory, spinning and doubling (twisting) machinery Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64 |
| ISO 594-1:1986 | Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.