ISO 11296-4:2018
Current
Current
The latest, up-to-date edition.
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes
Amended by
Available format(s)
Hardcopy , PDF
Language(s)
English, French
Published date
25-01-2018
€170.00
Excluding VAT
ISO 11296-4:2018, in conjunction with ISO 11296‑1, specifies requirements and test methods for cured-in-place pipes and fittings used for the renovation of underground non-pressure drainage and sewerage networks with service temperatures up to 50 °C.
ISO 11296-4:2018 applies to the use of various thermosetting resin systems, in combination with compatible fibrous carrier materials, reinforcement, and other process-related plastics components (see 5.3).
| Committee |
ISO/TC 138/SC 8
|
| DevelopmentNote |
Supersedes ISO/DIS 11296-4. To be read in conjunction with ISO 11296-1. (01/2018) NEW CHILD AMD 1 2021 IS NOW ADDED.
|
| DocumentType |
Standard
|
| Pages |
39
|
| ProductNote |
NEW CHILD AMD 1 2021 IS NOW ADDED.
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN ISO 11296-4/A1:2021 | Identical |
| NF EN ISO 11296-4:2018 | Identical |
| BS EN ISO 11296-4:2011 | Identical |
| PN-EN ISO 11296-4:2018 | Identical |
| EN ISO 11296-4:2018 | Identical |
| DIN EN ISO 11296-4:2018-09 | Identical |
| I.S. EN ISO 11296-4:2018 | Identical |
| NEN EN ISO 11296-4 : 2018 | Identical |
| I.S. EN ISO 11296-4:2011 | Identical |
| SS-EN ISO 11296-4:2018 | Identical |
| ÖNORM EN ISO 11296-4:2018 | Identical |
| EN ISO 11296-4:2011 | Identical |
| I.S. EN ISO 11296-4:2018&LC:2018 | Identical |
| NS EN ISO 11296-4 : 2018 | Identical |
| UNE-EN ISO 11296-4:2018 | Identical |
| BS EN ISO 11296-4:2018 | Identical |
| ISO 8773:2006 | Plastics piping systems for non-pressure underground drainage and sewerage — Polypropylene (PP) |
| ISO 7685:1998 | Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of initial specific ring stiffness |
| ISO 10467:2004 | Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin |
| ISO 10928:2016 | Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use |
| ISO 11295:2017 | Classification and information on design and applications of plastics piping systems used for renovation and replacement |
| ISO 75-2:2013 | Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
| ISO 11296-1:2009 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 1: General |
| ISO 3126:2005 | Plastics piping systems — Plastics components — Determination of dimensions |
| ISO 13002:1998 | Carbon fibre — Designation system for filament yarns |
| ISO 8513:2016 | Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the initial longitudinal tensile strength |
| ISO 10468:2003 | Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor |
| ISO 899-2:2003 | Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading |
| ISO 14125:1998 | Fibre-reinforced plastic composites — Determination of flexural properties |
| ISO 7684:1997 | Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the creep factor under dry conditions |
| ISO 4435:2003 | Plastics piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U) |
| EN 14364:2013 | Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints |
| ISO 10952:2014 | Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Determination of the resistance to chemical attack for the inside of a section in a deflected condition |
| ISO 178:2010 | Plastics — Determination of flexural properties |
| ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.