• ISO 11452-5:2002

    Current The latest, up-to-date edition.

    Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 5: Stripline

    Available format(s):  PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English, French

    Published date:  09-05-2002

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    This part of ISO 11452 specifies stripline tests for determining the immunity of electronic components for passenger cars and commercial vehicles to electrical distrubances from narrowband electromagnetic energy, regardless of the vehicle propulsion system (e.g. spark-ignition engine, diesel engine, electric motor). As the performance of these tests depends on the exposure of the equipment harness to a disturbance field, the applicability of this part of ISO 11452 is limited to equipment harnesses, which have a maximum diameter of one-third the stripline height or less.

    The electromagnetic disturbances considered are limited to continuous narrowband electromagnetic fields.

    General Product Information - (Show below) - (Hide below)

    Committee ISO/TC 22/SC 32
    Development Note Supersedes ISO/DIS 11452-5 (06/2002)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    16/30316581 DC : 0 BS EN ISO 13766-2 - EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY - PART 2: EMC REQUIREMENTS UNDER THE ASPECT OF FUNCTIONAL SAFETY
    16/30316578 DC : 0 BS EN ISO 13766-1 - EARTH-MOVING- AND BUILDING CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL ELECTRICAL POWER SUPPLY - PART 1: GENERAL EMC REQUIREMENTS UNDER TYPICAL EMC ENVIRONMENTAL CONDITIONS
    CSA M14982 : 2000 AGRICULTURAL AND FORESTRY MACHINERY - ELECTROMAGNETIC COMPATIBILITY - TEST METHODS AND ACCEPTANCE CRITERIA
    BS ISO 7635 : 2006 ROAD VEHICLES - AIR AND AIR/HYDRAULIC BRAKING SYSTEMS OF MOTOR VEHICLES, INCLUDING THOSE WITH ELECTRONIC CONTROL FUNCTIONS - TEST PROCEDURES
    15/30321305 DC : 0 BS EN 15194 - CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES
    SAE J 1113/1 : 2013 ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURES AND LIMITS FOR COMPONENTS OF VEHICLES, BOATS (UP TO 15 M), AND MACHINES (EXCEPT AIRCRAFT) (16.6 HZ TO 18 GHZ)
    NBR ISO 14982 : 2017 AGRICULTURAL AND FORESTRY MACHINERY - ELECTROMAGNETIC COMPATIBILITY - TEST METHODS AND ACCEPTANCE CRITERIA
    CEI EN 62132-4 : 2006 CIRCUITS INTEGRES - MESURE DE L'IMMUNITE ELECTROMAGNETIQUE 150 KHZ A 1 GHZ - PARTIE 4: METHODE D'INJECTION DIRECTE DE PUISSANCE RF
    06/30157139 DC : 0
    00/706017 DC : DRAFT MAR 2000 BS ISO 15763 - ROAD VEHICLES - ALARM SYSTEMS FOR COMMERCIAL VEHICLES
    09/30191126 DC : DRAFT FEB 2009 BS EN 62132-8 - INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY - PART 8: MEASUREMENT OF RADIATED IMMUNITY - IC STRIP LINE METHOD
    NF ISO 13766 : 1999 EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY
    SAE J 2357 : 2012 APPLICATION GUIDELINES FOR ELECTRONICALLY DRIVEN AND/OR CONTROLLED EXTERIOR AUTOMOTIVE LIGHTING EQUIPMENT
    09/30191130 DC : DRAFT FEB 2009 BS EN 61967-8 - INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC EMISSIONS - PART 8: MEASUREMENT OF RADIATED EMISSIONS - IC STRIPLINE METHOD
    07/30171041 DC : DRAFT AUG 2007 DD IEC/TS 61000-1-2 -ELECTROMAGNETIC COMPATIBILITY -GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA
    BS EN 62132-4 : 2006 INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY 150 KHZ TO 1 GHZ - PART 4: DIRECT RF POWER INJECTION METHOD
    05/30127980 DC : DRAFT JAN 2005 ISO 13766 - EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY
    ISO 13766-1:2018 Earth-moving and building construction machinery Electromagnetic compatibility (EMC) of machines with internal electrical power supply Part 1: General EMC requirements under typical electromagnetic environmental conditions
    SAE J 2578 : 2014 RECOMMENDED PRACTICE FOR GENERAL FUEL CELL VEHICLE SAFETY
    SAE J ISO 13766 : FEB 2003 EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY
    PREN 15194 : DRAFT 2015 CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES
    ISO 13766-2:2018 Earth-moving and building construction machinery Electromagnetic compatibility (EMC) of machines with internal electrical power supply Part 2: Additional EMC requirements for functional safety
    NBR ISO 13766 : 2007 EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY
    ISO/TR 15497:2000 Road vehicles Development guidelines for vehicle based software
    BS EN 15194:2017 Cycles. Electrically power assisted cycles. EPAC Bicycles
    I.S. EN 62132-4:2006 INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY 150 KHZ TO 1 GHZ - PART 4: DIRECT RF POWER INJECTION METHOD
    CEI 79-56 : 2009 BLACK BOX TYPE SYSTEMS: FUNCTIONAL REQUIREMENTS AND TESTS
    ISO 13766:2006 Earth-moving machinery Electromagnetic compatibility
    IEC 60839-10-1:1995 Alarm systems - Part 10: Alarm systems for road vehicles - Section 1: Passenger cars
    CEI 79-51 : 2006 COMMUNICATION PROTOCOL FOR SECURITY INFORMATION (ALARMS) - PART 1: TRANSPORT LAYERS
    ISO 7634:2007 Road vehicles Compressed air braking systems for towed vehicles including those with electronic braking control functions Test procedures
    17/30358367 DC : 0 BS EN 17128 - NON-APPROVED LIGHT MOTORIZED VEHICLES FOR THE TRANSPORTATION OF PERSONS AND GOODS AND RELATED FACILITIES - PERSONAL LIGHT ELECTRIC VEHICLES (PLEV) - SAFETY REQUIREMENTS AND TEST METHODS
    ISO 7635:2006 Road vehicles Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions Test procedures
    BS ISO 7634:2007 Road vehicles. Compressed air braking systems for towed vehicles including those with electronic braking control functions .Test procedures
    ISO 11835:2002 Road vehicles Motor vehicles with antilock braking systems (ABS) Measurement of braking performance
    I.S. EN 15194:2017 CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES
    ISO 15763:2002 Road vehicles Alarm systems for buses and commercial vehicles of maximum authorized total mass greater than 3,5 t
    DIN EN 13309:2010-12 CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL POWER SUPPLY
    DIN EN ISO 14982:2009-12 Agricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)
    01/714099 DC : DRAFT OCT 2001 ISO 16750-2 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 2: ELECTRICAL LOADS
    UNE-EN 13309:2010 Construction machinery - Electromagnetic compatibility of machines with internal power supply
    BS EN ISO 14982 : 2009 AGRICULTURAL AND FORESTRY MACHINERY - ELECTROMAGNETIC COMPATIBILITY - TEST METHODS AND ACCEPTANCE CRITERIA
    04/30089279 DC : DRAFT FEB 2004 ISO 21848 - ROAD VEHICLES - ELECTRICAL AND ELECTRONIC EQUIPMENT FOR 42 V NETWORKS - ELECTRICAL LOADS
    ISO 14982:1998 Agricultural and forestry machinery Electromagnetic compatibility Test methods and acceptance criteria
    DEFSTAN 59-411(PT1)/2(2014) : 2014 ELECTROMAGNETIC COMPATIBILITY - PART 1: MANAGEMENT AND PLANNING
    BS EN 13309:2010 (published 2010-08) Construction machinery. Electromagnetic compatibility of machines with internal power supply
    IEC 62132-4:2006 Integrated circuits - Measurement of electromagnetic immunity 150 kHz to 1 GHz - Part 4: Direct RF power injection method
    I.S. EN 13309:2010 CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL POWER SUPPLY
    I.S. EN ISO 14982:2009 AGRICULTURAL AND FORESTRY MACHINERY - ELECTROMAGNETIC COMPATIBILITY - TEST METHODS AND ACCEPTANCE CRITERIA
    EN 13309 : 2010 CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL POWER SUPPLY
    EN 62132-4 : 2006 INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY 150 KHZ TO 1 GHZ - PART 4: DIRECT RF POWER INJECTION METHOD
    EN ISO 14982 : 2009 AGRICULTURAL AND FORESTRY MACHINERY - ELECTROMAGNETIC COMPATIBILITY - TEST METHODS AND ACCEPTANCE CRITERIA
    EN 15194:2017 Cycles - Electrically power assisted cycles - EPAC Bicycles
    UNI EN 13309 : 2010 CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL POWER SUPPLY
    UNI EN ISO 14982 : 2009 AGRICULTURAL AND FORESTRY MACHINERY - ELECTROMAGNETIC COMPATIBILITY - TEST METHODS AND ACCEPTANCE CRITERIA

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 11452-1:2015 Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective