ISO 12215-5:2008
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Small craft Hull construction and scantlings Part 5: Design pressures for monohulls, design stresses, scantlings determination
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
15-05-2019
Superseded by
Published date
11-04-2008
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 12215-5:2008 applies to the determination of design pressures and stresses, and to the determination of the scantlings, including internal structural members of monohull small craft constructed from fibre reinforced plastics, aluminium or steel alloys, glued wood or other suitable boat building material, with a length of hull in accordance with ISO 8666, between 2,5 m and 24 m.
It only applies to boats in the intact condition and to craft with a maximum speed equal to or less than 50 knots in fully loaded, ready for use conditions.
| DevelopmentNote |
To be used in conjunction with ISO 12215-6, ISO 12215-7, ISO 12215-8 and ISO 12215-9. (04/2008) DRAFT ISO/DIS 12215-5 is also available for this standard. (06/2017)
|
| DocumentType |
Standard
|
| Pages |
108
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| EN ISO 12215-5:2018 | Identical |
| NF EN ISO 12215-5 : 2008 AMD 1 2014 | Identical |
| ONORM EN ISO 12215-5 : 2019 | Identical |
| SAC GB/T 19314.5 : 2019 | Identical |
| PN EN ISO 12215-5 : 2009 AMD 1 2014 | Identical |
| I.S. EN ISO 12215-5:2018 | Identical |
| SN EN ISO 12215-5:2019 | Identical |
| BS EN ISO 12215-5 : 2008 | Identical |
| SN EN ISO 12215-5 : 2008 AMD 1 2014 | Identical |
| ONORM EN ISO 12215-5 : 2014 | Identical |
| UNE-EN ISO 12215-5:2008 | Identical |
| UNE-EN ISO 12215-5:2019 | Identical |
| JIS F 1034-5:2019 | Identical |
| NBN EN ISO 12215-5 : 2008 AMD 1 2014 | Identical |
| NEN EN ISO 12215-5 : 2008 AMD 1 2014 | Identical |
| UNI EN ISO 12215-5 : 2014 | Identical |
| NS EN ISO 12215-5 : 2008 AMD 1 2014 | Identical |
| I.S. EN ISO 12215-5:2008 | Identical |
| DIN EN ISO 12215-5:2014-10 | Identical |
| BS EN ISO 12215-5:2018 | Identical |
| UNE-EN ISO 6185-4:2012 | Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
| ISO 12215-8:2009 | Small craft — Hull construction and scantlings — Part 8: Rudders |
| EN ISO 12215-6:2008 | Small craft - Hull construction and scantlings - Part 6: Structural arrangements and details (ISO 12215-6:2008) |
| 13/30229200 DC : 0 | BS EN ISO 6185-3 - INFLATABLE BOATS - PART 3: BOATS WITH A MAXIMUM MOTOR POWER RATING OF 15 KW AND GREATER |
| ISO 12215-2:2002 | Small craft — Hull construction and scantlings — Part 2: Materials: Core materials for sandwich construction, embedded materials |
| ONORM EN ISO 6185-4 : 2015 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-4:2011, CORRECTED VERSION 2014-08-01) |
| I.S. EN ISO 12215-2:2002 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 2: MATERIALS: CORE MATERIALS FOR SANDWICH CONSTRUCTION, EMBEDDED MATERIALS |
| UNE-EN ISO 6185-3:2015 | Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
| UNE-EN ISO 12215-9:2013 | Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 12215-9:2012) |
| BS EN ISO 21487 : 2012 | SMALL CRAFT - PERMANENTLY INSTALLED PETROL AND DIESEL FUEL TANKS |
| DIN EN ISO 6185-3:2014-12 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-3:2014) |
| UNI EN ISO 6185-4 : 2011 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
| EN ISO 6185-3:2014 | Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
| DIN EN ISO 12215-2:2002-09 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLING - MATERIALS: CORE MATERIALS FOR SANDWICH CONSTRUCTION, EMBEDDED MATERIALS |
| I.S. EN ISO 6185-4:2011 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-4:2011, CORRECTED VERSION 2014-08-01) |
| PREN ISO 6185-3 : DRAFT 2013 | INFLATABLE BOATS - PART 3: BOATS WITH A MAXIMUM MOTOR POWER RATING OF 15 KW AND GREATER (ISO/DIS 6185-3:2013) |
| I.S. EN ISO 12215-9:2012 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES (ISO 12215-9:2012) |
| DIN EN ISO 12215-6:2008-07 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 6: STRUCTURAL ARRANGEMENTS AND DETAILS |
| BS EN ISO 6185-4:2011 | Inflatable boats Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater |
| NF EN ISO 6185-4 : 2011 | INFLATABLE BOATS - PART 4: BOATS WITH AN HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
| 11/30232951 DC : 0 | BS EN ISO 21487 - SMALL CRAFT - PERMANENTLY INSTALLED PETROL AND DIESEL FUEL TANKS |
| I.S. EN ISO 6185-3:2014 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR RATING OF 15 KW AND GREATER (ISO 6185-3:2014) |
| NF EN ISO 12215-8 : 2009 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 8: RUDDERS |
| BS EN ISO 12215-8:2009 | Small craft. Hull construction and scantlings Rudders |
| DIN EN ISO 12215-8:2009-10 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 8: RUDDERS |
| DIN EN ISO 21487:2016-05 | SMALL CRAFT - PERMANENTLY INSTALLED PETROL AND DIESEL FUEL TANKS (ISO 21487:2012 + AMD 1:2014 + AMD 2:2015) |
| 00/715272 DC : 0 | ISO/DIS 12215-6 - SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 6: STRUCTURAL ARRANGEMENTS AND DETAILS |
| 04/301209 DC : DRAFT JAN 2004 | EN ISO 21487 - SMALL CRAFT - PERMANENTLY INSTALLED PETROL AND DIESEL FUEL TANKS |
| ISO 6185-3:2014 | Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater |
| BS EN ISO 12215-9:2012 | Small craft. Hull construction and scantlings Sailing craft appendages |
| DIN EN ISO 6185-4:2011-10 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
| BS EN ISO 6185-3:2014 | Inflatable boats Boats with a hull length less than 8 m with a motor rating of 15 kW and greater |
| EN ISO 12215-9:2012 | Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 12215-9:2012) |
| UNI EN ISO 6185-3 : 2014 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR RATING OF 15 KW AND GREATER |
| ISO 21487:2012 | Small craft — Permanently installed petrol and diesel fuel tanks |
| UNI EN ISO 12215-9 : 2012 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES |
| ONORM EN ISO 12215-6 : 2008 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 6: STRUCTURAL ARRANGEMENTS AND DETAILS |
| UNI EN ISO 12215-6 : 2008 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 6: STRUCTURAL ARRANGEMENTS AND DETAILS |
| I.S. EN ISO 12215-8:2009 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 8: RUDDERS |
| DIN EN ISO 12215-9:2013-01 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES (ISO 12215-9:2012) |
| UNI EN ISO 12215-8 : 2009 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 8: RUDDERS |
| ISO 12215-6:2008 | Small craft — Hull construction and scantlings — Part 6: Structural arrangements and details |
| ISO 12215-9:2012 | Small craft Hull construction and scantlings Part 9: Sailing craft appendages |
| BS EN ISO 12215-2:2002 | Small craft. Hull construction and scantlings Materials. Core materials for sandwich construction, embedded materials |
| EN ISO 12215-2:2002 | Small craft - Hull construction and scantlings - Part 2: Materials: Core materials for sandwich construction, embedded materials (ISO 12215-2:2002) |
| EN ISO 6185-4:2011 | Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
| UNE-EN ISO 21487:2013 | Small craft - Permanently installed petrol and diesel fuel tanks (ISO 21487:2012) |
| ISO 6185-4:2011 | Inflatable boats Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater |
| I.S. EN ISO 12215-6:2008 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 6: STRUCTURAL ARRANGEMENTS AND DETAILS |
| I.S. EN ISO 21487:2012 | SMALL CRAFT - PERMANENTLY INSTALLED PETROL AND DIESEL FUEL TANKS (ISO 21487:2012) |
| ONORM EN ISO 6185-3 : 2014 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR RATING OF 15 KW AND GREATER (ISO 6185-3:2014) |
| 2003/44/EC : 2003 COR 1 2006 | DIRECTIVE 2003/44/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 16 JUNE 2003 AMENDING DIRECTIVE 94/25/EC ON THE APPROXIMATION OF THE LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO RECREATIONAL CRAFT |
| ISO 1922:2012 | Rigid cellular plastics Determination of shear strength |
| ISO 12215-9:2012 | Small craft Hull construction and scantlings Part 9: Sailing craft appendages |
| ISO 845:2006 | Cellular plastics and rubbers — Determination of apparent density |
| 1994/25/EC : 1994 | DIRECTIVE 94/25/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 16 JUNE 1994 ON THE APPROXIMATION OF THE LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO RECREATIONAL CRAFT |
| BS EN 408 : 2010 | TIMBER STRUCTURES - STRUCTURAL TIMBER AND GLUED LAMINATED TIMBER - DETERMINATION OF SOME PHYSICAL AND MECHANICAL PROPERTIES |
| ASTM C 393 : 2000 | Standard Test Method for Flexural Properties of Sandwich Constructions |
| ISO 8666:2016 | Small craft Principal data |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| ISO 12215-3:2002 | Small craft — Hull construction and scantlings — Part 3: Materials: Steel, aluminium alloys, wood, other materials |
| EN 13195-1 : 2002 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) - PART 1: SPECIFICATIONS |
| ISO 12216:2002 | Small craft Windows, portlights, hatches, deadlights and doors Strength and watertightness requirements |
| ISO 178:2010 | Plastics Determination of flexural properties |
| ISO 844:2014 | Rigid cellular plastics Determination of compression properties |
| BS EN 1995-1-1 : 2012 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
| ISO 12215-6:2008 | Small craft — Hull construction and scantlings — Part 6: Structural arrangements and details |
| ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
| ABS 0037 : 1994 COR 2012 | GUIDE FOR BUILDING AND CLASSING OFFSHORE RACING YACHTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.