ISO 1407:2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Rubber — Determination of solvent extract
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
25-04-2023
French, English, Russian
25-11-2011
ISO 1407:2011 specifies four methods for the quantitative determination of the material extractable from raw rubbers, both natural and synthetic; two of the methods are also applicable to the unvulcanized and vulcanized compounds of raw rubbers.
Method A measures the mass of the solvent extract, after evaporation of the solvent, relative to the mass of the original test portion.
Method B measures the difference in the mass of the test portion before and after extraction.
Method C, which is for raw rubbers only, measures the difference in the mass of the test portion before and after extraction using boiling solvent.
Method D, which is for raw rubbers only, measures the difference in the mass of the test portion before and after extraction relative to the mass of the original test portion.
Recommendations as to the solvent most appropriate for each type of rubber are given in an annex.
Committee |
ISO/TC 45/SC 2
|
DevelopmentNote |
Supersedes ISO/DIS 1407. (11/2011)
|
DocumentType |
Standard
|
Pages |
18
|
PublisherName |
International Organization for Standardization
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
NEN ISO 1407 : 2011 | Identical |
UNI ISO 1407 : 2012 | Identical |
UNE-ISO 1407:2012 | Identical |
NF ISO 1407 : 2012 | Identical |
BS ISO 1407:2011 | Identical |
SS-ISO 1407:2011 | Identical |
GOST ISO 1407 : 2013 | Identical |
NFT 46 100 : 2004 | Similar to |
UNE 53651:1996 | Identical |
DIN ISO 1407:1996-01 | Identical |
UNI 8001 : 1979 | Similar to |
NBN ISO 1407 : 1994 | Identical |
DIN 53553:1979-05 | Similar to |
ISO 4650:2012 | Rubber — Identification — Infrared spectrometric methods |
BS ISO 9924-3:2009 | Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction |
BS ISO 19984-3:2017 | Rubber and rubber products. Determination of biobased content Biobased mass content |
BS ISO 21561-1:2015 | Styrene-butadiene rubber (SBR). Determination of the microstructure of solution-polymerized SBR <sup>1</sup>H-NMR and IR with cast-film method |
ISO 7270-1:2003 | Rubber Analysis by pyrolytic gas-chromatographic methods Part 1: Identification of polymers (single polymers and polymer blends) |
BS ISO 21561 : 2005 | STYRENE-BUTADIENE RUBBER (SBR) - DETERMINATION OF THE MICROSTRUCTURE OF SOLUTION-POLYMERIZED SBR |
BS ISO 9924-1:2000 | Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers |
14/30295466 DC : 0 | BS ISO 19051 - RUBBER, RAW NATURAL, AND RUBBER LATEX, NATURAL - DETERMINATION OF NITROGEN CONTENT BY MICRO DUMA'S COMBUSTION METHOD |
DIN 78082-1:1991-10 | Raw materials for the rubber industry; styrene-butadiene rubber; typical characteristics |
07/30162068 DC : 0 | BS ISO 24698-1 - RUBBER, RAW - DETERMINATION OF BOUND ACRYLONITRILE CONTENT IN ACRYLONITRILE-BUTADIENE RUBBER (NBR) - PART 1: COMBUSTION (DUMAS) METHOD |
BS ISO 22768:2017 | Rubber, raw. Determination of the glass transition temperature by differential scanning calorimetry (DSC) |
FD ISO/TR 16314 : 2010 FD | RUBBER - MEASUREMENT OF THE AROMATICITY OF OIL IN RECLAIMED RUBBERS |
07/30161736 DC : 0 | BS ISO 9924-3 - RUBBER AND RUBBER PRODUCTS - DETERMINATION OF THE COMPOSITION OF VULCANIZATES AND UNCURED COMPOUNDS BY THERMOGRAVIMETRY - PART 3: HYDROCARBON RUBBERS, HALOGENATED RUBBERS AND POLYSILOXANE RUBBERS AFTER EXTRACTION |
BS 7164-25:1990 | Chemical tests for raw and vulcanized rubber Method for determination of sulphide sulphur content |
17/30328799 DC : 0 | BS EN 549 - RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT |
BS ISO 7270-1 : 2003 | RUBBER - ANALYSIS BY PYROLYTIC GAS-CHROMATOGRAPHIC METHODS - PART 1: IDENTIFICATION OF POLYMERS (SINGLE POLYMERS AND POLYMER BLENDS) |
BS ISO 9924-2 : 2000 | RUBBER AND RUBBER PRODUCTS - DETERMINATION OF THE COMPOSITION OF VULCANIZATES AND UNCURED COMPOUNDS BY THERMOGRAVIMETRY - PART 2: ACRYLONITRILE-BUTADIENE AND HALOBUTYL RUBBERS |
UNI ISO 21461 : 2012 | RUBBER - DETERMINATION OF THE AROMATICITY OF OIL IN VULCANIZED RUBBER COMPOUNDS |
PD ISO/TS 16096:2014 | Reclaimed isobutene-isoprene (IIR) rubber. Evaluation procedure |
UNI ISO 4650 : 2013 | RUBBER - IDENTIFICATION - INFRARED SPECTROMETRIC METHODS |
16/30334951 DC : 0 | BS ISO 10638 - RUBBER - IDENTIFICATION OF ANTIDEGRADANTS BY GAS CHROMATOGRAPHY/MASS SPECTROMETRY |
BS 7164-24:1990 | Chemical tests for raw and vulcanized rubber Determination of extractable sulphur |
10/30195783 DC : 0 | BS ISO 4650 - RUBBER - IDENTIFICATION - INFRARED SPECTROMETRIC METHOD |
ISO 12965:2000 | Butadiene rubber Determination of microstructure by infra-red spectrometry |
ISO/TR 16314:2010 | Rubber Measurement of the aromaticity of oil in reclaimed rubbers |
BS ISO 10638:2017 | Rubber. Identification of antidegradants by gas chromatography/mass spectrometry |
BS ISO 6235:2016 | Rubber, raw. Determination of block polystyrene content. Ozonolysis method |
BS 7164-15.1:1994 | Chemical tests for raw and vulcanized rubber. Method for thermogravimetric determination of the composition of vulcanizates and uncured compounds Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers |
PREN 549 : DRAFT 2017 | RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT |
BS ISO 24698-2:2008 | Rubber, raw. Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) Kjeldahl method |
BS 7164-24:1996 | Chemical tests for raw and vulcanized rubber Determination of free sulfur |
BS ISO 7270-2:2012 | Rubber. Analysis by pyrolytic gas-chromatographic methods Determination of styrene/butadiene/isoprene ratio |
PD ISO/TR 16314:2010 | Rubber. Measurement of the aromaticity of oil in reclaimed rubbers |
PD ISO/TS 16097:2013 | Vulcanized crumb rubber. Evaluation procedures |
BS ISO 17257:2013 | Rubber. Identification of polymers. Pyrolytic gas-chromatographic method using mass-spectrometric detection |
ISO 24698-1:2008 | Rubber, raw Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) Part 1: Combustion (Dumas) method |
07/30162094 DC : 0 | BS ISO 24698-2 - RUBBER, RAW - DETERMINATION OF BOUND ACRYLONITRILE CONTENT IN ACRYLONITRILE-BUTADIENE RUBBER (NBR) - PART 2: KJEDAHL METHOD |
BS 7164-14:1990 | Chemical tests for raw and vulcanized rubber Methods for determination of carbon black content |
14/30302222 DC : 0 | BS ISO 21561-1 - STYRENE-BUTADIENE RUBBER (SBR) - DETERMINATION OF THE MICROSTRUCTURE OF SOLUTION-POLYMERIZED SBR - PART 1: 1H-NMR AND IR METHOD |
04/30112021 DC : DRAFT APR 2004 | ISO 4650 - RUBBER - IDENTIFICATION - INFRA-RED SPECTROMETRIC METHOD |
PD CEN/TR 15990:2010 | Data sheets. Footwear tests materials and test adhesives |
16/30318194 DC : DRAFT MAR 2016 | BS ISO 20163 - VULCANIZED RUBBER - DETERMINATION OF FREE SULFUR BY GAS CHROMATOGRAPHY (GC) AND HIGH PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
13/30255920 DC : 0 | BS ISO 17257 - RUBBER - IDENTIFICATION OF POLYMERS - PYROLYTIC GAS-CHROMATOGRAPHIC METHOD USING MASS-SPECTROMETRIC DETECTION |
BS ISO 24698-1:2008 | Rubber, raw. Determination of bound Acrylonitrile content in acrylonitrile-butadiene rubber (NBR) Combustion (Dumas) method |
11/30244786 DC : 0 | BS ISO 21461 - RUBBER - DETERMINATION OF THE AROMATICITY OF OIL IN VULCANIZED RUBBER COMPOUNDS |
05/30129583 DC : DRAFT FEB 2005 | ISO 21461 - RUBBER - DETERMINATION OF OIL TYPE IN VULCANIZED RUBBER COMPOUNDS |
UNI ISO 6225-1 : 2008 | RUBBER, RAW, NATURAL - DETERMINATION OF CASTOR OIL CONTENT - PART 1: DETERMINATION OF CASTOR OIL GLYCERINE CONTENT BY THIN-LAYER CHROMATOGRAPHY |
ISO 22768:2017 | Rubber, raw Determination of the glass transition temperature by differential scanning calorimetry (DSC) |
ISO/TS 16095:2014 | Reclaimed rubber derived from products containing mainly natural rubber Evaluation procedure |
ISO 21561:2005 | Styrene-butadiene rubber (SBR) Determination of the microstructure of solution-polymerized SBR |
PD ISO/TS 16095:2014 | Reclaimed rubber derived from products containing mainly natural rubber. Evaluation procedure |
DIN 18035-7:2014-10 | SPORTS GROUNDS - PART 7: SYNTHETIC TURF AREAS |
ISO 6225-1:2006 | Rubber, raw, natural — Determination of castor oil content — Part 1: Determination of castor oil glyceride content by thin-layer chromatography |
ISO 9924-3:2009 | Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 3: Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction |
BS ISO 21461:2012 | Rubber. Determination of the aromaticity of oil in vulcanized rubber compounds |
16/30313052 DC : 0 | BS ISO 19984-3 - RUBBER AND RUBBER PRODUCTS - DETERMINATION OF BIOBASED CONTENT - PART 3: BIOBASED MASS CONTENT |
ISO 7270-2:2012 | Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 2: Determination of styrene/butadiene/isoprene ratio |
09/30178870 DC : DRAFT JAN 2009 | BS ISO 10638 - RAW RUBBER, LATEX, RUBBER COMPOUNDS AND RUBBER PRODUCTS - IDENTIFICATION OF ANTIDEGRADANTS BY GAS CHROMATOGRAPHY/MASS SPECTROMETRY |
UNI ISO 9924-3 : 2010 | RUBBER AND RUBBER PRODUCTS - DETERMINATION OF THE COMPOSITION OF VULCANIZATES AND UNCURED COMPOUNDS BY THERMOGRAVIMETRY - PART 3: HYDROCARBON RUBBERS, HALOGENATED RUBBERS AND POLYSILOXANE RUBBERS AFTER EXTRACTION |
ISO 21461:2012 | Rubber — Determination of the aromaticity of oil in vulcanized rubber compounds |
DIN EN 549:1995-04 | RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT |
ISO 9924-2:2016 | Rubber and rubber products Determination of the composition of vulcanizates and uncured compounds by thermogravimetry Part 2: Acrylonitrile-butadiene and halobutyl rubbers |
ISO/TS 16097:2013 | Vulcanized crumb rubber — Evaluation procedures |
ISO 17257:2013 | Rubber Identification of polymers Pyrolytic gas-chromatographic method using mass-spectrometric detection |
S.R. CEN TR 15990:2010 | DATA SHEETS - FOOTWEAR TESTS MATERIALS AND TEST ADHESIVES |
EN 549:1994 | Rubber materials for seals and diaphragms for gas appliances and gas equipment |
ISO 19984-3:2017 | Rubber and rubber products — Determination of biobased content — Part 3: Biobased mass content |
03/307995 DC : DRAFT MAY 2003 | ISO 7270-2 - RUBBER - ANALYSIS BY PYROLYTIC GAS-CHROMATOGRAPHIC METHODS - PART 2: DETERMINATION OF STYRENE/BUTADIENE/ISOPRENE RATIO |
ISO 24698-2:2008 | Rubber, raw Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) Part 2: Kjeldahl method |
BS ISO 12965:2000 | Butadiene rubber. Determination of microstructure by infra-red spectrometry |
BS 7164-7.1:1990 | Chemical tests for raw and vulcanized rubber. Methods for determination of polymer content Polyisoprene content |
BS ISO 4650:2012 | Rubber. Identification. Infrared spectrometric methods |
ISO/TS 16096:2014 | Reclaimed isobutene-isoprene (IIR) rubber Evaluation procedure |
ISO 5478:2006 | Rubber Determination of styrene content Nitration method |
ISO 6235:2016 | Rubber, raw Determination of block polystyrene content Ozonolysis method |
ISO 21561-1:2015 | Styrene-butadiene rubber (SBR) Determination of the microstructure of solution-polymerized SBR Part 1: 1H-NMR and IR with cast-film method |
ISO 10638:2017 | Rubber Identification of antidegradants by gas chromatography/mass spectrometry |
ISO 9924-1:2016 | Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers |
ISO 18064:2014 | Thermoplastic elastomers Nomenclature and abbreviated terms |
ISO 1795:2017 | Rubber, raw natural and raw synthetic — Sampling and further preparative procedures |
ISO 4661-2:1987 | Rubber, vulcanized Preparation of samples and test pieces Part 2: Chemical tests |
ISO/TR 9272:2005 | Rubber and rubber products Determination of precision for test method standards |
ISO 1629:2013 | Rubber and latices — Nomenclature |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.